单路由器1对多nat

 

PC1 10.10.10.10

|

|

R1 gi0/0  10.10.10.1

R1 gi0/1  20.20.20.1       R1 gi0/2 30.30.30.1

|                          |

|                          |

PC2 20.20.20.20            PC3 30.30.30.30

 

 

pc1访问pc2，10.10.10.10转换为1.1.1.1

pc1访问pc3，10.10.10.10转换为2.2.2.2

 

弄个图吧

 

R1配置
interface GigabitEthernet0/0
 ip address 10.10.10.1 255.255.255.0
 ip nat inside
!
interface GigabitEthernet0/1
 ip address 20.20.20.1 255.255.255.0
 ip nat outside
!
interface GigabitEthernet0/2
 ip address 30.30.30.1 255.255.255.0
 ip nat outside
!
ip nat inside source static 10.10.10.10 1.1.1.1 route-map test1
ip nat inside source static 10.10.10.20 1.1.1.2 route-map test1
ip nat inside source static 10.10.10.10 2.2.2.2 route-map test2
ip nat inside source static 10.10.10.20 2.2.2.3 route-map test2
!
access-list 101 permit ip host 10.10.10.20 host 20.20.20.20
access-list 101 permit ip host 10.10.10.10 host 20.20.20.20
access-list 102 permit ip host 10.10.10.10 host 30.30.30.30
access-list 102 permit ip host 10.10.10.20 host 30.30.30.30
!
route-map test2 permit 10
 match ip address 102
 set interface GigabitEthernet0/2
!
route-map test1 permit 10
 match ip address 101
 set interface GigabitEthernet0/1
!

验证，pc1 ping pc2，pc1 ping pc3

R1上 sh ip nat tra