目录
简介
/**
* FilterInputStream包含一些其他的输入流,它使用这些输入流作为
* 它的基本数据源,可能在过程中转换数据或提供额外的功能。
* 类FilterInputStream本身简单地覆盖了InputStream的所有方法,其版本将所有请求传递给包含的InputStream。
* FilterInputStream的子类可以进一步覆盖其中的一些方法,还可以提供其他方法和字段。
*
* @author Jonathan Payne
* @since JDK1.0
*/
public
class FilterInputStream extends InputStream
字段in,构造函数
/**
* 要过滤的输入流。
*/
protected volatile InputStream in;
/**
* 通过将参数分配到字段this.in来创建FilterInputStream。
* 以便记住以后使用。
*
* @param in 依赖的输入流,如果要在没有依赖的输入流的情况下创建此实例,则为null。
*/
protected FilterInputStream(InputStream in) {
this.in = in;
}
其余方法
FilterInputStream的其余方法xxx,都是直接调用in.xxx()
它的子类会覆盖这些方法
/**
* Reads the next byte of data from this input stream. The value
* byte is returned as an <code>int</code> in the range
* <code>0</code> to <code>255</code>. If no byte is available
* because the end of the stream has been reached, the value
* <code>-1</code> is returned. This method blocks until input data
* is available, the end of the stream is detected, or an exception
* is thrown.
* <p>
* This method
* simply performs <code>in.read()</code> and returns the result.
*
* @return the next byte of data, or <code>-1</code> if the end of the
* stream is reached.
* @exception IOException if an I/O error occurs.
* @see java.io.FilterInputStream#in
*/
public int read() throws IOException {
return in.read();
}
/**
* Reads up to <code>byte.length</code> bytes of data from this
* input stream into an array of bytes. This method blocks until some
* input is available.
* <p>
* This method simply performs the call
* <code>read(b, 0, b.length)</code> and returns
* the result. It is important that it does
* <i>not</i> do <code>in.read(b)</code> instead;
* certain subclasses of <code>FilterInputStream</code>
* depend on the implementation strategy actually
* used.
*
* @param b the buffer into which the data is read.
* @return the total number of bytes read into the buffer, or
* <code>-1</code> if there is no more data because the end of
* the stream has been reached.
* @exception IOException if an I/O error occurs.
* @see java.io.FilterInputStream#read(byte[], int, int)
*/
public int read(byte b[]) throws IOException {
return read(b, 0, b.length);
}
/**
* Reads up to <code>len</code> bytes of data from this input stream
* into an array of bytes. If <code>len</code> is not zero, the method
* blocks until some input is available; otherwise, no
* bytes are read and <code>0</code> is returned.
* <p>
* This method simply performs <code>in.read(b, off, len)</code>
* and returns the result.
*
* @param b the buffer into which the data is read.
* @param off the start offset in the destination array <code>b</code>
* @param len the maximum number of bytes read.
* @return the total number of bytes read into the buffer, or
* <code>-1</code> if there is no more data because the end of
* the stream has been reached.
* @exception NullPointerException If <code>b</code> is <code>null</code>.
* @exception IndexOutOfBoundsException If <code>off</code> is negative,
* <code>len</code> is negative, or <code>len</code> is greater than
* <code>b.length - off</code>
* @exception IOException if an I/O error occurs.
* @see java.io.FilterInputStream#in
*/
public int read(byte b[], int off, int len) throws IOException {
return in.read(b, off, len);
}
/**
* Skips over and discards <code>n</code> bytes of data from the
* input stream. The <code>skip</code> method may, for a variety of
* reasons, end up skipping over some smaller number of bytes,
* possibly <code>0</code>. The actual number of bytes skipped is
* returned.
* <p>
* This method simply performs <code>in.skip(n)</code>.
*
* @param n the number of bytes to be skipped.
* @return the actual number of bytes skipped.
* @exception IOException if the stream does not support seek,
* or if some other I/O error occurs.
*/
public long skip(long n) throws IOException {
return in.skip(n);
}
/**
* Returns an estimate of the number of bytes that can be read (or
* skipped over) from this input stream without blocking by the next
* caller of a method for this input stream. The next caller might be
* the same thread or another thread. A single read or skip of this
* many bytes will not block, but may read or skip fewer bytes.
* <p>
* This method returns the result of {@link #in in}.available().
*
* @return an estimate of the number of bytes that can be read (or skipped
* over) from this input stream without blocking.
* @exception IOException if an I/O error occurs.
*/
public int available() throws IOException {
return in.available();
}
/**
* Closes this input stream and releases any system resources
* associated with the stream.
* This
* method simply performs <code>in.close()</code>.
*
* @exception IOException if an I/O error occurs.
* @see java.io.FilterInputStream#in
*/
public void close() throws IOException {
in.close();
}
/**
* Marks the current position in this input stream. A subsequent
* call to the <code>reset</code> method repositions this stream at
* the last marked position so that subsequent reads re-read the same bytes.
* <p>
* The <code>readlimit</code> argument tells this input stream to
* allow that many bytes to be read before the mark position gets
* invalidated.
* <p>
* This method simply performs <code>in.mark(readlimit)</code>.
*
* @param readlimit the maximum limit of bytes that can be read before
* the mark position becomes invalid.
* @see java.io.FilterInputStream#in
* @see java.io.FilterInputStream#reset()
*/
public synchronized void mark(int readlimit) {
in.mark(readlimit);
}
/**
* Repositions this stream to the position at the time the
* <code>mark</code> method was last called on this input stream.
* <p>
* This method
* simply performs <code>in.reset()</code>.
* <p>
* Stream marks are intended to be used in
* situations where you need to read ahead a little to see what's in
* the stream. Often this is most easily done by invoking some
* general parser. If the stream is of the type handled by the
* parse, it just chugs along happily. If the stream is not of
* that type, the parser should toss an exception when it fails.
* If this happens within readlimit bytes, it allows the outer
* code to reset the stream and try another parser.
*
* @exception IOException if the stream has not been marked or if the
* mark has been invalidated.
* @see java.io.FilterInputStream#in
* @see java.io.FilterInputStream#mark(int)
*/
public synchronized void reset() throws IOException {
in.reset();
}
/**
* Tests if this input stream supports the <code>mark</code>
* and <code>reset</code> methods.
* This method
* simply performs <code>in.markSupported()</code>.
*
* @return <code>true</code> if this stream type supports the
* <code>mark</code> and <code>reset</code> method;
* <code>false</code> otherwise.
* @see java.io.FilterInputStream#in
* @see java.io.InputStream#mark(int)
* @see java.io.InputStream#reset()
*/
public boolean markSupported() {
return in.markSupported();
}