char *strdup(const char *s)
函数功能: string duplicate字符串拷贝,目的空间由该函数分配
函数返回: 指向拷贝后的字符串指针
参数说明: src-待拷贝的源字符串
所属文件: <string.h>
#include <stdio.h>
#include <string.h>
#include <alloc.h>
int main()
{
char *dup_str, *string="abcde";
dup_str=strdup(string);
printf("%s", dup_str);
free(dup_str);
return 0;
}
char* strcpy(char* str1,char* str2)
函数功能: 把str2指向的字符串拷贝到str1中去
函数返回: 返回str1,即指向str1的指针
参数说明:
所属文件: <string.h>
#include <stdio.h>
#include <string.h>
int main()
{
char string[10];
char *str1="abcdefghi";
strcpy(string,str1);
printf("the string is:%s\n",string);
return 0;
}
char *strncpy(char *dest, const char *src,int count)
函数功能: 将字符串src中的count个字符拷贝到字符串dest中去
函数返回: 指向dest的指针
参数说明: dest-目的字符串,src-源字符串,count-拷贝的字符个数
所属文件: <string.h>
#include<stdio.h>
#include<string.h>
int main()
{
char*src = "bbbbbbbbbbbbbbbbbbbb";//20 'b's
char dest[50] ="aaaaaaaaaaaaaaaaaaaa";//20 'a's
puts(dest); //输出:aaaaaaaaaaaaaaaaaaaa
strncpy(dest, src, 10);
puts(dest); //输出:bbbbbbbbbbaaaaaaaaaa
return0;
//注意:strncpy只复制指定长度的字符,不会自动在末尾加'\0'。
//若指定长度超过源字符串长度,不够的部分补‘\0’,
}
char* strcat(char * str1,char * str2)
函数功能: 把字符串str2接到str1后面,str1最后的’\0’被取消
函数返回: str1
参数说明:
所属文件: <string.h>
#include <stdio.h>
#include <string.h>
int main()
{
char buffer[80];
strcpy(buffer,"Hello ");
strcat(buffer,"world");
printf("%s\n",buffer);
return 0;
}
char *strncat(char *dest, const char *src, size_t maxlen)
函数功能: 将字符串src中前maxlen个字符连接到dest中
函数返回:
参数说明:
所属文件: <string.h>
#include <stdio.h>
#include <string.h>
char buffer[80];
int main()
{
strcpy(buffer,"Hello ");
strncat(buffer,"world",8);
printf("%s\n",buffer);
strncat(buffer,"*************",4);
printf("%s\n",buffer);
return 0;
//注意:与strncpy不同的是,strncat会自动在末尾加‘\0’
//若指定长度超过源字符串长度,则只复制源字符串长度即停止
}
int strcmp(char * str1,char * str2)
函数功能: 比较两个字符串str1,str2.
函数返回: str1<str2,返回负数;str1=str2,返回 0;str1>str2,返回正数.
参数说明:
所属文件: <string.h>
#include <string.h>
#include <stdio.h>
int main()
{
char *buf1="aaa", *buf2="bbb",*buf3="ccc";
int ptr;
ptr=strcmp(buf2, buf1);
if(ptr>0)
{
printf("buffer 2 is greater thanbuffer 1\n");
}
else
{
printf("buffer 2 is less thanbuffer 1\n");
}
ptr=strcmp(buf2, buf3);
if(ptr>0)
printf("buffer 2 is greater thanbuffer 3\n");
else
printf("buffer 2 is less thanbuffer 3\n");
return 0;
}
int strncmp(char *str1,char *str2,int count)
函数功能: 对str1和str2中的前count个字符按字典顺序比较
函数返回: 小于0:str1<str2,等于0:str1=str2,大于0:str1>str2
参数说明: str1,str2-待比较的字符串,count-比较的长度
所属文件: <string.h>
#include<string.h>
#include<stdio.h>
int main()
{
char str1[] ="aabbc";//
char str2[] = "abbcd";//
//为使测试程序更简练,此处假定了strncmp只返回-1,0,1三个数
char res_info[] = {'<','=','>'};
int res;
//前1个字符比较
res = strncmp(str1, str2, 1);
printf("1:str1%c str2\n", res_info[res+1]); //输出:1:str1= str2
//前3个字符比较
res = strncmp(str1, str2, 3);
printf("3:str1%c str2\n", res_info[res+1]); //输出:3:str1< str2
}
char *strpbrk(const char *s1, const char *s2)
函数功能: 得到s1中第一个“同时也出现在s2中”字符的位置指针
函数返回: 位置指针
参数说明:
所属文件: <string.h>
#include<stdio.h>
#include<string.h>
int main()
{
char *p="Find all vowels";
p=strpbrk(p+1,"aeiouAEIOU");
while(p)
{
printf("%s\n",p);
p=strpbrk(p+1,"aeiouAEIOU");
}
return 0;
}
//输出:
//ind all vowels
//all vowels
//owels
//els
int strcspn(const char *s1, const char *s2)
函数功能: 统计s1中从头开始直到第一个“来自s2中的字符”出现的长度
函数返回: 长度
参数说明:
所属文件: <string.h>
#include<stdio.h>
#include<string.h>
int main()
{
printf("%d\n",strcspn("abcbcadef","cba")); //输出:0
printf("%d\n",strcspn("xxxbcadef","cba")); //输出:3
printf("%d\n",strcspn("123456789","cba")); //输出:9
return 0;
}
int strspn(const char *s1, const char *s2)
函数功能: 统计s1中从头开始直到第一个“不来自s2中的字符”出现的长度
函数返回: 位置指针
参数说明:
所属文件: <string.h>
#include<stdio.h>
#include<string.h>
#include<alloc.h>
int main()
{
printf("%d\n",strspn("abcbcadef","cba")); //输出:6
printf("%d\n",strspn("xxxbcadef","cba")); //输出:0
printf("%d\n",strspn("123456789","cba")); //输出:0
return 0;
}
char* strchr(char* str,char ch);
函数功能: 找出str指向的字符串中第一次出现字符ch的位置
函数返回: 返回指向该位置的指针,如找不到,则返回空指针
参数说明: str-待搜索的字符串,ch-查找的字符
所属文件: <string.h>
#include<string.h>
#include<stdio.h>
int main()
{
char *str = "This is a string!";
char ch;
char *p;
while(1)
{
printf("Please input a char:");
ch = getchar();
p = strchr(str, ch);
if(p)
{
printf("%c is the %d character of\"%s\"\n",ch, (int)(p-str+1),str);
}
else
{
printf("Not found!\n");
}
printf("Press ESC to quit!\n\n");
if(27 == getch())
{
break;
}
fflush(stdin);
}
return 0;
}
/*输出:
Please input achar:i
i is the 3character of "This is a string!"
Press ESC to quit!
Please input achar:l
Not found!
Press ESC to quit!
Please input achar:s
s is the 4character of "This is a string!"
Press ESC to quit!
*/
char *strrchr(const char *s, int c)
函数功能: 得到字符串s中最后一个含有c字符的位置指针
函数返回: 位置指针
参数说明:
所属文件: <string.h>
#include<string.h>
#include<stdio.h>
int main()
{
charstring[15];
char*ptr,c='r';
strcpy(string,"This is a string");
ptr=strrchr(string,c);
if (ptr)
{
printf("The character %c is at position:%d",c,ptr-string);
}
else
{
printf("The character was not found");
}
return 0;
}
char* strstr(char* str1,char* str2);
函数功能: 找出str2字符串在str1字符串中第一次出现的位置(不包括str2的串结束符)
函数返回: 返回该位置的指针,如找不到,返回空指针
参数说明:
所属文件: <string.h>
#include<stdio.h>
#include<string.h>
int main()
{
char*str1="Open Watcom C/C++",*str2="Watcom",*ptr;
ptr=strstr(str1,str2);
printf("The substring is:%s\n",ptr); //输出:The substringis:Watcom C/C++
return 0;
}
char *strcasestr(const char *haystack, const char *needle)
函数功能: 用于在c串haystack中查找c串needle,忽略大小写。
函数返回: 如果找到则返回needle串在haystack串中第一次出现的位置的char指针.
所属文件: <string.h>
在<string.h>中定义了用于进行忽略大小写的字符串比较的函数strcasecmp及strncasecmp
char *strrev(char *s)
函数功能: 将字符串中的所有字符颠倒次序排列**
函数返回: 指向s的指针
参数说明:
所属文件: <string.h>
#include<string.h>
#include<stdio.h>
int main()
{
char forward[]="string"; //原文中定义为char*是不对的,指向代码段的指针内容是不可变的
printf("Before strrev():%s",forward);
strrev(forward);
printf("Afterstrrev(): %s",forward);
return 0;
}
//输出:
//Beforestrrev():string
//After strrev():gnirts
char *strnset(char *s, int ch, size_t n)
函数功能: 将字符串s中前n个字符设置为ch的值
函数返回: 指向s的指针
参数说明:
所属文件: <string.h>
#include<stdio.h>
#include<string.h>
int main()
{
charstring[]="aaaaaaaaaaaaaaaaaaaaaaa";
char letter='x';
printf("string before strnset:%s\n",string);
strnset(string,letter,10);
printf("string after strnset: %s\n",string);
return 0;
}
//输出:
//string beforestrnset: aaaaaaaaaaaaaaaaaaaaaaa
//string afterstrnset: xxxxxxxxxxaaaaaaaaaaaaa
char *strset(char *s, int ch)
函数功能: 将字符串s中所有字符设置为ch的值**
函数返回: 指向s的指针
参数说明:
所属文件: <string.h>
#include<stdio.h>
#include<string.h>
int main()
{
charstring[10]="123456789";
charsymbol='c';
printf("Before strset(): %s", string);
strset(string, symbol);
printf("After strset(): %s", string);
return 0;
}
char *strtok(char *s1, const char *s2)
函数功能: 分解s1字符串为用特定分隔符分隔的多个字符串(一般用于将英文句分解为单词)**
函数返回: 字符串s1中首次出现s2中的字符前的子字符串指针
参数说明: s2一般设置为s1中的分隔字符 ;
规定进行子调用时(即分割s1的第二、三及后续子串)第一参数必须是NULL;
每次匹配成功后,将s1中分割出的子串位置替换为NULL,因此s1被破坏了;
函数会记忆指针位置以供下一次调用;
所属文件: <string.h>
#include<string.h>
#include<stdio.h>
int main()
{
char *p;
char*buffer;
char*delims={ " .," };
buffer=strdup("Find words, all of them.");
printf("%s\n",buffer);
p=strtok(buffer,delims);
while(p!=NULL)
{
printf("word: %s\n",p);
p=strtok(NULL,delims);
}
printf("%s\n",buffer);
return 0;
}
//根据测试,可以随时给strtok的第一个参数输入一个新的字符串,开始新字符串的分隔
char*strsep(char **stringp, const char *delim)
函数功能: strsep(),作为strtok的升级版,是一个很有用的字符串处理函数
Be cautious when using this function. If you do use it, note that:
This function modifies its first argument.
This function cannot be used on constant strings.
The identity of the delimiting character is lost.
所属文件: <string.h>
#include <stdio.h>
#include <string.h>
int main(void)
{
char s[] = "hello world!";
char *p = s;
char *d = " ";
printf("%s\n", strsep(&p, d));
printf("%s\n", p);
return 0;
//输出:helloworld!
}
char *strupr(char *s)
函数功能: 将字符串s中的字符变为大写
函数返回:
参数说明:
所属文件: <string.h>
#include <stdio.h>
#include <string.h>
int main()
{
char string[]="abcdefghijklmnopqrstuvwxyz",*ptr; //会影响原字符串的内存,用char[]来声明
ptr=strupr(string);
printf("%s",ptr);
return 0;
}
char *strlwr(char *s)
函数功能: 将字符串中的字符变为小写字符
函数返回: 指向s的指针
参数说明:
所属文件: <string.h>
#include<string.h>
int main()
{
char str[]="HOW TO SAY?";
printf("%s",strlwr(str));
return 0;
}
char *strerror(int errnum)
函数功能: 得到错误信息的内容信息
函数返回: 错误提示信息字符串指针
参数说明: errnum-错误编号
所属文件: <string.h>
#include <stdio.h>
#include <errno.h>
int main()
{
char *buffer;
buffer=strerror(errno);
printf("Error: %s",buffer);
return 0;
}
void *memcpy(void *dest, const void *src, size_t n)
函数功能: 字符串拷贝
函数返回: 指向dest的指针
参数说明: src-源字符串,n-拷贝的最大长度
所属文件: <string.h>,<mem.h>
#include <stdio.h>
#include <string.h>
int main()
{
char src[]="******************************";
char dest[]="abcdefghijlkmnopqrstuvwxyz0123456709";
char *ptr;
printf("destination before memcpy:%s\n",dest);
ptr=memcpy(dest,src,strlen(src));
if (ptr)
printf("destination after memcpy:%s\n",dest);
else
printf("memcpy failed");
return 0;
}
//输出:
//destination before memcpy:abcdefghijlkmnopqrstuvwxyz0123456709
//destination after memcpy:******************************456709
void *memccpy(void *dest, const void *src, int c, size_t n)
函数功能: 字符串拷贝,到指定长度或遇到指定字符时停止拷贝
函数返回:
参数说明: src-源字符串指针,c-中止拷贝检查字符,n-长度,dest-拷贝底目的字符串指针
所属文件: <string.h>,<mem.h>
#include <string.h>
#include <stdio.h>
int main()
{
char *src="This is the source string";
char dest[50];
char *ptr;
ptr=memccpy(dest,src,'c',strlen(src));
if (ptr)
{
*ptr='\0';
printf("The character wasfound:%s",dest);
}
else
{
printf("The character wasn'tfound");
}
return 0;
//输出:The character was found:This is the sourc
//PS:指定字符被复制到dest中,memccpy返回了dest中指定字符的下一处的地址,返回NULL表示未遇到指定字符
}
void *memchr(const void *s, int c, size_t n)
函数功能: 在字符串中第开始n个字符中寻找某个字符c的位置
函数返回: 返回c的位置指针,返回NULL时表示未找到
参数说明: s-要搜索的字符串,c-要寻找的字符,n-指定长度
所属文件: <string.h>,<mem.h>
#include <string.h>
#include <stdio.h>
int main()
{
char str[17];
char *ptr;
strcpy(str,"This is a string");
ptr=memchr(str,'r',strlen(str));
if (ptr)
{
printf("The character 'r' is at position:%d",ptr-str);
}
else
{
printf("The character was not found");
}
return 0;
}
//memrchr 和上面类似只不过是返回ch的结尾。
int memcmp(const void *s1, const void *s2,size_t n)
函数功能: 按字典顺序比较两个串s1和s2的前n个字节
函数返回: <0,=0,>0分别表示s1<,=,>s2
参数说明: s1,s2-要比较的字符串,n-比较的长度
所属文件: <string.h>,<mem.h>
#include <stdio.h>
#include <string.h>
int main()
{
char *buf1="ABCDE123";
char *buf2="abcde456";
int stat;
stat=memcmp(buf1,buf2,5);
printf("The strings to position 5 are");
if(stat) printf("not ");
printf("the same\n");
return 0;
}
int memicmp(const void *s1, const void *s2, size_t n)
函数功能: 按字典顺序、不考虑字母大小写对字符串s1,s2前n个字符比较
函数返回: <0,=0,>0分别表示s1<,=,>s2
参数说明: s1,s2-要比较的字符串,n-比较的长度
所属文件: <string.h>,<mem.h>
#include <stdio.h>
#include <string.h>
int main()
{
char *buf1="ABCDE123";
char *buf2="abcde456";
int stat;
stat=memicmp(buf1,buf2,5);
printf("The strings to position 5 are");
if(stat) printf("not");
printf("the same");
return 0;
//输出:The strings to position 5 are the same
}
void *memmove(void *dest, const void *src, size_t n)
函数功能: 字符串拷贝
函数返回: 指向dest的指针
参数说明: src-源字符串,n-拷贝的最大长度
所属文件: <string.h>,<mem.h>
#include <string.h>
#include <stdio.h>
int main()
{
chardest[40]="abcdefghijklmnopqrstuvwxyz0123456789";
printf("destination prior tomemmove:%s\n",dest);
memmove(dest+1,dest,35);
printf("destination aftermemmove:%s",dest);
return 0;
}
//PS:与memcpy不同的是,memmove可以处理目的字符串与源字符串地址空间出现重叠的情况,
//可保证待复制的内容不被破坏。
void *memset(void *s, int c, size_t n)
函数功能: 字符串中的n个字节内容设置为c
函数返回:
参数说明: s-要设置的字符串,c-设置的内容,n-长度
所属文件: <string.h>,<mem.h>
#include <string.h>
#include <stdio.h>
#include <mem.h>
int main()
{
charbuffer[]="Hello world";
printf("Buffer before memset:%s/n",buffer);
memset(buffer,'*',strlen(buffer)-1);
printf("Buffer after memset:%s",buffer);
return 0;
}