linux 433发送驱动

驱动代码：

#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <asm/irq.h>
//#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/string.h>
#include <linux/list.h>
#include <linux/pci.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <asm/unistd.h>

#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>

#include <plat/gpio-cfg.h>
#include <mach/gpio-bank-e.h>
#include <mach/gpio-bank-k.h>
#define DEVICE_NAME "433"

static long t433_ioctl(struct file *filp, unsigned int cmd, unsigned int arg)
{
 	unsigned tmp, h, l, i, j, cmd1;
	
	tmp = readl(S3C64XX_GPKDAT);
	h = tmp |(0x01<<8);//把第８位也就是GBK８输出１
   　　 l = tmp &(~(0x01<<8));//把第８位也就是GBK８输出0
	for(j=0; j<5; j++){
		cmd1=cmd;
		writel(h, S3C64XX_GPKDAT);//高电平起始位
		mdelay(3);				  //3ms
		writel(l, S3C64XX_GPKDAT);//低电平数据间隔
		mdelay(2);			  //800us
		for(i=0; i<32; i++){
			if(cmd1&0x1){//写1
				//printk("1");
				writel(h, S3C64XX_GPKDAT);//写高电平
				mdelay(2);				  //2ms
				writel(l, S3C64XX_GPKDAT);//低电平数据间隔
				mdelay(2);			  //800us
			}
			else {//写0
				//printk("0");
				writel(h, S3C64XX_GPKDAT);//写高电平
				mdelay(1);				  //1ms
				writel(l, S3C64XX_GPKDAT);//低电平数据间隔
				mdelay(2);			  //800us
			}
			cmd1=cmd1>>1;   //右移
		}
		msleep(8);
	//printk("\n\n");
	}
	//printk("t433_ioctl\n");
	//printk("cmd=%d\narg=%d\n",cmd,arg);
	return 0;
}

static struct file_operations dev_fops = {
	.owner			= THIS_MODULE,
	.unlocked_ioctl	= t433_ioctl,
};

static struct miscdevice misc = {
	.minor = MISC_DYNAMIC_MINOR,
	.name = DEVICE_NAME,
	.fops = &dev_fops,
};

static int __init dev_init(void)
{
	int ret;

	{
		unsigned tmp;
		tmp = readl(S3C64XX_GPKCON1);
		tmp = (tmp & ~0xf)|(0x01); //设置GBK8为输出状态
		writel(tmp, S3C64XX_GPKCON1);

		tmp = readl(S3C64XX_GPKDAT);
	//	tmp |= (0x01<<8);//把第８位也就是GBK８输出１
		tmp &= ~(0x01<<8);//把第８位也就是GBK８输出１
		//tmp &= 0x0;
		writel(tmp, S3C64XX_GPKDAT);
	}
	ret = misc_register(&misc);//应该是在/dev下出那个DEVICE_NAME
	printk ("size unsigned = %d\n", sizeof(unsigned));
	printk (DEVICE_NAME"\tinitialized\n");

	return ret;
}

static void __exit dev_exit(void)
{
	misc_deregister(&misc);
}

module_init(dev_init);
module_exit(dev_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("yangkun");

以上驱动根据自己的协议发送的。就是一些时序

测试代码：

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

int main(int argc, char **argv)
{
	int on;
	int led_no;
	int fd;

	if (argc != 3 || sscanf(argv[1], "%d", &led_no) != 1 || sscanf(argv[2],"%d", &on) != 1 ||
			on < 0 || on > 1 || led_no < 0 || led_no > 3) {
		fprintf(stderr, "Usage: leds led_no 0|1\n");
		exit(1);
	}

	fd = open("/dev/433", 0);
	if (fd < 0) {
		fd = open("/dev/433", 0);
	}
	if (fd < 0) {
		perror("open device leds");
		exit(1);
	}
	//char a[4]={0xc0, 0x00, 0x11, 0xee};
	//memcpy(&on, a, 4);
	if(on==1)
		on=0xee1101c0;
	else
		on=0xee1100c0;
	printf("on=%x\n",on);
	ioctl(fd, on, led_no);
	close(fd);

	return 0;
}

代码是根据友善的改的。