ILI9325初始化代码

最新推荐文章于 2021-10-02 13:05:47 发布

Tillmanyang

最新推荐文章于 2021-10-02 13:05:47 发布

阅读量3.2k

点赞数

分类专栏： LCD 文章标签： ILI9325 液晶驱动

本文链接：https://blog.csdn.net/yangsong512/article/details/46515699

版权

LCD 专栏收录该内容

3 篇文章 0 订阅

订阅专栏

void LCD_Init1(void)
{   unsigned int i;   
    GPIO_ResetBits(GPIOE, GPIO_Pin_1);
    Delay(0xAFFff);                    
    GPIO_SetBits(GPIOE, GPIO_Pin_1 );        //V7    
    Delay(0xAFFff);     

    //************* Start Initial Sequence **********//
    LCD_WR_CMD(0x0001, 0x0100); // set SS and SM bit
    LCD_WR_CMD(0x0002, 0x0700); // set 1 line inversion
    LCD_WR_CMD(0x0003, 0x1030); // set GRAM write direction and BGR=1.
    LCD_WR_CMD(0x0004, 0x0000); // Resize register
    LCD_WR_CMD(0x0008, 0x0207); // set the back porch and front porch
    LCD_WR_CMD(0x0009, 0x0000); // set non-display area refresh cycle ISC[3:0]
    LCD_WR_CMD(0x000A, 0x0000); // FMARK function
    LCD_WR_CMD(0x000C, 0x0000); // RGB interface setting
    LCD_WR_CMD(0x000D, 0x0000); // Frame marker Position
    LCD_WR_CMD(0x000F, 0x0000); // RGB interface polarity
    //*************Power On sequence ****************//
    LCD_WR_CMD(0x0010, 0x0000); // SAP, BT[3:0], AP, DSTB, SLP, STB
    LCD_WR_CMD(0x0011, 0x0007); // DC1[2:0], DC0[2:0], VC[2:0]
    LCD_WR_CMD(0x0012, 0x0000); // VREG1OUT voltage
    LCD_WR_CMD(0x0013, 0x0000); // VDV[4:0] for VCOM amplitude
    LCD_WR_CMD(0x0007, 0x0001);
    Delay(12000); // Dis-charge capacitor power voltage
    LCD_WR_CMD(0x0010, 0x1490); // SAP, BT[3:0], AP, DSTB, SLP, STB
    LCD_WR_CMD(0x0011, 0x0227); // DC1[2:0], DC0[2:0], VC[2:0]
    Delay(15500); // Delay 50ms
    LCD_WR_CMD(0x0012, 0x001C); // Internal reference voltage= Vci;
    Delay(15000); // Delay 50ms
    LCD_WR_CMD(0x0013, 0x1A00); // Set VDV[4:0] for VCOM amplitude
    LCD_WR_CMD(0x0029, 0x0025); // Set VCM[5:0] for VCOMH
    LCD_WR_CMD(0x002B, 0x000C); // Set Frame Rate
    Delay(15000); // Delay 50ms
    LCD_WR_CMD(0x0020, 0x0000); // GRAM horizontal Address
    LCD_WR_CMD(0x0021, 0x0000); // GRAM Vertical Address
    // ----------- Adjust the Gamma Curve ----------//
    LCD_WR_CMD(0x0030, 0x0000);
    LCD_WR_CMD(0x0031, 0x0506);
    LCD_WR_CMD(0x0032, 0x0104);
    LCD_WR_CMD(0x0035, 0x0207);
    LCD_WR_CMD(0x0036, 0x000F);
    LCD_WR_CMD(0x0037, 0x0306);
    LCD_WR_CMD(0x0038, 0x0102);
    LCD_WR_CMD(0x0039, 0x0707);
    LCD_WR_CMD(0x003C, 0x0702);
    LCD_WR_CMD(0x003D, 0x1604);
    //------------------ Set GRAM area ---------------//
    LCD_WR_CMD(0x0050, 0x0000); // Horizontal GRAM Start Address
    LCD_WR_CMD(0x0051, 0x00EF); // Horizontal GRAM End Address
    LCD_WR_CMD(0x0052, 0x0000); // Vertical GRAM Start Address
    LCD_WR_CMD(0x0053, 0x013F); // Vertical GRAM Start Address
    LCD_WR_CMD(0x0060, 0xA700); // Gate Scan Line
    LCD_WR_CMD(0x0061, 0x0001); // NDL,VLE, REV

    LCD_WR_CMD(0x006A, 0x0000); // set scrolling line
    //-------------- Partial Display Control ---------//
    LCD_WR_CMD(0x0080, 0x0000);
    LCD_WR_CMD(0x0081, 0x0000);
    LCD_WR_CMD(0x0082, 0x0000);
    LCD_WR_CMD(0x0083, 0x0000);
    LCD_WR_CMD(0x0084, 0x0000);
    LCD_WR_CMD(0x0085, 0x0000);
    //-------------- Panel Control -------------------//
    LCD_WR_CMD(0x0090, 0x0010);
    LCD_WR_CMD(0x0092, 0x0600);
    LCD_WR_CMD(0x0007, 0x0133); // 262K color and display ON     

    LCD_WR_CMD(32, 0);
    LCD_WR_CMD(33, 0);
    *(__IO uint16_t *) (Bank1_LCD_C)= 34;    //×¼±¸Ð´Êý¾ÝÏÔÊ¾Çø
    for(i=0;i<76800;i++)
    {
      LCD_WR_Data(0xffff);                   //ÓÃºÚÉ«ÇåÆÁ
    }  
}