在CPT里模拟增加了回环,如何删除:
B>en
B#conf t
Enter configuration commands, one per line. End with CNTL/Z.
B(config)#no int loopback 0
B(config)#
%LINK-5-CHANGED: Interface Loopback0, changed state to administratively down
%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0, changed state to down
B(config)#exit
B#
%SYS-5-CONFIG_I: Configured from console by console
B#sh ip int bri
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 unassigned YES unset administratively down down
FastEthernet0/1 192.168.1.253 YES manual up up
Ethernet1/0 unassigned YES unset up down
Ethernet1/1 unassigned YES unset up down
Ethernet1/2 unassigned YES unset up down
Ethernet1/3 unassigned YES unset up down
Vlan1 unassigned YES unset administratively down down
B#