Microblue（严 武）

1 How does the application layer on a server usually process multiple client request for services? ceases all connections to the service denies multiple connections to a single daemon suspends

This item references content from the following areas:CCNA Exploration3.1.1 Introducing VLANs Assessment Item:Which two statements describe the benefits of VLANs? (Choose two.)VLANs improve networ

This item references content from the following areas:CCNA Exploration6.1.2 Interfaces and Subinterfaces Assessment Item: Refer to the exhibit. Which three statements describe the network design

item references content from the following areas: CCNA Exploration2.1.1 Key Elements of Ethernet/802.3 Networks Assessment Item:When a collision occurs in a network using CSMA/CD, how do hosts wit

This item references content from the following areas:CCNA Exploration7.1.2 Wireless LAN Standards Assessment Item:Which two conditions have favored adoption of 802.11g over 802.11a? (Choose two.)

This item references content from the following areas:CCNA Exploration4.2.2 VTP Domains Assessment Item:Which statement is true when VTP is configured on a switched network that incorporates VLANs

1 Which of the following states the 80/20 rule of end-to-end VLANs?   80% of network resources should be remote and 20% should be on the local VLAN.   80% of VLANs should be static and the remaining 2

This item references content from the following areas:CCNA Exploration1.1.1 The Hierarchical Network Model Assessment Item:Which layer of the hierarchical network design model is refered to as the

This item references content from the following areas:CCNA Exploration5.1.2 Issues with Redundancy Assessment Item: Refer to the exhibit. All switches in the network have empty MAC tables. STP h

 1. Which two pieces of information are typically found on a logical network diagram? (Choose two.) cable types connector types interface identifiers DLCI for virtual circuits operating system versi

 This item references content from the following areas:CCNA Exploration7.3.2 IPv6 Addressing Assessment Item:Your organization is issued the IPv6 prefix of 2001:0000:130F::/48 by your service

 Refer to the exhibit. What is accomplished when both commands are configured on the router?The commands filter UDP and TCP traffic coming to the router. The commands disable any TCP or UDP request se

Refer to the exhibit. The network administrator applied an ACL outbound on S0/0/0 on router R1. Immediately after the administrator did so, the users on network 172.22.30.0/24 started complaining

 1、目前，我国应用最为广泛的LAN标准是基于（）的以太网标准.(A) IEEE 802.1(B) IEEE 802.2(C) IEEE 802.3(D) IEEE 802.5 答案：C参考知识点：现有标准：IEEE 802.1 局域网协议高层 IEEE 802.2 逻辑链路控制 IEEE 802.3 以太网 IEEE 802.4 令牌总线 IEEE 802.5 令牌环 IEEE 80

 100、逆向地址解析协议（Inverse ARP）的主要功能是：（）(A) 通过网络设备的网络地址查找到设备的硬件地址(B) 查找连接的DLCI编号(C) 在帧中继网络中查找虚电路连接的对端设备的协议地址(D) 在帧中继网络中生成对端协议地址与DLCI的映射答案:D101、作为一个网络维护人员，对于OSPF区域体系结构的原则必须有清楚的了解，下面的论述表达正确的是：（）(A) 所

 1. Which two statements about DSL are true (Choose two.) users are on a shared medium uses RF signal transmission local loop can be up to 3.5 miles (5.5km) physical and data link layers are defined

This item references content from the following areas:CCNA Exploration3.2.2 Configuring Static Frame Relay Maps Assessment Item: Refer to the exhibit. Router R1 has been configured for Frame Rel

 1.2.4 WAN Switching Concepts Assessment Item:What is an advantage of packet-switched technology over circuit-switched technology?Packet-switched networks are less susceptible to jitter than circu

On a router running EIGRP, what database would maintain a list of feasible successors?topology tableRefer to the exhibit. This is the debug output from 2 directly connected EIGRP routers. They a

What two advantages does CIDR provide to a network? (Choose two.)reduced routing table sizereduced routing update trafficRefer to the exhibit. The network administrator wants to create a subnet for th

Which two statements correctly describe the concepts of administrative distance and metric? (Choose two.)Administrative distance refers to the trustworthiness of a particular route.Routes with the

If a router cannot find a valid configuration file during the startup sequence, what will occur?The router will prompt the user for a response to enter setup mode.Refer to the exhibit. The network a

Which of the following are displayed by the Router# show cdp neighbors command? (Choose three.)platformholdtimelocal interfaceWhy is it advisable to enter a next-hop IP address when creating a sta

Which event will cause a triggered update?a route is installed in the routing table Three routers running a distance-vector routing protocol lost all power, including the battery backups. When t

Refer to the exhibit. What does the "O*E2" from the "O*E2 0.0.0.0/0 [110/1] via 192.168.1.1, 00:05:34, Serial0/0" line represent?an external OSPF route that will not increment in cost.Refer to t

1. Which statements correctly identify the role of intermediary devices in the network? (Choose three.)  determine pathways for data initiate data communications retime and retransmit data sig

1 What is the purpose of a default gateway?physically connects a computer to a network provides a permanent address to a computer identifies the network to which a computer is connected identi

1.The serial connection shown in the graphic needs to be configured. Which configuration commands must be made on the Sydney router to establish connectivity with the Melbourne site? (Choose three

Refer to the exhibit. What can be determined from this output?All of the routes listed are network routes.Refer to the exhibit. A packet destined for host 128.107.0.5/16 is processed by the JAX router

Refer to the exhibit. When Router D is configured to use a link-state routing protocol and is added to the network, what is the first thing that it does to begin learning the network topology?It lea

1 Convert the decimal number 231 into its binary equivalent. Select the correct answer from the list below.  11110010 11011011 11110110 *11100111 11100101 11101110 2 In an 8 bit binary

1 Which method of signal transmission uses radio waves to carry signals? electrical optical wireless acoustic             2 What characteristic of UTP cable helps reduce the effects of

1 Convert the binary number 10111010 into its hexadecimal equivalent. Select the correct answer from the list below. 85 90 BA A1 B3 1C          2 When a collision occurs in a netwo

1 What are two common methods for setting a UTP Ethernet port to MDI or MDIX operation? (Choose two.)cable color code association cable selection and configuration use of cable testers to determ

Refer to the exhibit. The network that is shown is running RIPv1. The 192.168.10.0/24 network was recently added and will only contain end users. What command or set of commands should be entered on R

Refer to the exhibit. If all routers are running RIP version 2, why is there no route for the 192.168.1.32/27 network?Rip version 2 will auto summarize routes by default.Refer to the exhibit. Which tw

1 Refer to the exhibit. Which network prefix will work with the IP addressing scheme shown in the graphic./24 /16 /20 /27 /25 /28          2 Which IPv4 subnetted addresses repr

1 What is a function of the data link layer? provides the formatting of data provides end-to-end delivery of data between hosts provides delivery of data between two applications provides fo

 This item references content from the following areas:CCNA Exploration2.3.2 PPP Configuration Commands Assessment Item: Refer to the exhibit. What can be concluded about the function of the S