原文网址: http://blog.csdn.net/yearafteryear/article/details/7357236
(一)虚拟按键的描述可以见韩超和梁泉的《Android系统级深入开发——移植与调试》的第八章:
虚拟按键(Virtual Key)是Eclair版本开始增加的新特性。Virtual Key的功能是利用触摸屏,模拟按键发生的事件,这样就可以利用触摸屏的边缘,实现一些可以自定义的按键效果。
虚拟按键的实现效果如图8-5所示。
图8-5 虚拟按键的实现效果
在Android系统中,触摸屏设备发送的是RawInputEvent(原始输入事件),而按键发送的是KeyEvent(按键事件)。KeyEvent直接发送给应用程序层,RawInputEvent在Android的Java框架中被转换成MotionEvent发送给应用程序层。
在Android系统中虚拟按键的实现方法是:在某种情况下,将RawInputEvent转换成KeyEvent。
frameworks/base/services/Java/com/android/server目录中的InputDevice.Java文件负责处理虚拟按键的主要文件。
虚拟按键的处理相对简单,需要根据以下文件对虚拟按键的内容进行配置:
/sys/board_properties/virtualkeys.{devicename}
在InputDevice.Java文件中通过readVirtualKeys,对进行消息的转化。根据配置文件将RawInputEvent转换成按键相关的内容。
virtualkeys.{devicename}是虚拟按键的适配文件,需要在目标文件系统的/sys/board_ properties/目录中。
虚拟按键配置文件的格式如下所示:
0x1:扫描码:X:Y:W:H:0x1: ……
例如,在MSM的mahimahi平台上查看虚拟按键的配置文件如下所示:
# cat /sys/board_properties/virtualkeys.synaptics-rmi-touchscreen
0x01:158:55:835:90:55:0x01:139:172:835:125:55:0x01:102:298:835:115:55:0x01:217:412:835:95:55
由此可见,其中定义了4个区域的虚拟按键,它们的Y坐标相同,可见4个按键的矩形区域位于水平的一排。其转换的扫描码分别为158,139,102,217,分别对应于BACK(返回),MENU(菜单),HOME(主界面),SEARCH(搜索)这4个按键。
另外一个系统的虚拟按键的配置文件如下所示:
$ cat /sys/board_properties/virtualkeys.qtouch-touchscreen
0x01:139:90:936:116:104:0x01:102:252:936:116:104:0x01:158:402:936:116:104
其转换的扫描码分别为:139,102,158,分别对应于MENU(菜单),HOME(主界面),BACK(返回)这3个按键。
提示:使用虚拟按键转换成为的是按键的扫描码,不是按键码,因此依然需要经过按键布局文件的转化才能得到按键码。
(二)如果按照韩超和梁泉的《Android系统级深入开发——移植与调试》的第八章描述虚拟按键的实现过程如下:
- input_set_abs_params(input_dev, ABS_MT_POSITION_X, 61, 1085, 0, 0);
- input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, SCREEN_MAX_Y, 0, 0);
其中61是可视区域左侧x轴左边坐标,1085是右侧的。
3.Android框架层
Android上层通过读取触摸屏坐标并经过转算后来识别定义好的虚拟按键,代码位于frameworks/base/services/java/com/android/server/KeyInputQueue.java中:
static class Virtualkey{}是负责按键定位的方法;
private void readVirtualKeys(String deviceName)负责读取sys文件,这是最重要的代码,也是与底层sys文件系统沟通的桥梁,它会读取/sys/board_properties/virtualkeys.{deviceName}文件,deviceName一定要与触摸屏设备名称一致,不然会找不到指定的sys文件。
4.sys文件系统
前面讲到了readVirtualKeys会读取sys文件,这个sys文件就是定义虚拟按键的坐标以及键值,它的协议格式是一段字符串,每个按键有六项分别用冒号分割,按键按键之间也是用冒号分割,标准格式是:
键类型:键值:按键区域中心x坐标:按键区域中心y坐标:按键区域宽:按键区域高
加载触摸屏以及创建sys文件的代码:
- <span style="font-size:13px;">#ifdef VIRTUAL_KEYS
- static ssize_t virtual_keys_show(struct kobject *kobj,
- struct kobj_attribute *attr, char *buf)
- {
- if (1) {
- return sprintf(buf,
- __stringify(EV_KEY) ":" __stringify(KEY_VOLUMEUP) ":1030:370:30:30"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_VOLUMEDOWN) ":1030:470:30:30"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_BACK) ":1030:18:30:30"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_HOME) ":1030:136:30:30"
- ":" __stringify(EV_KEY) ":" __stringify(KEY_MENU) ":1030:236:30:30"
- "\n");
- } else {
- }
- }
- static struct kobj_attribute virtual_keys_attr = {
- .attr = {
- .name = "virtualkeys.xxxx",
- .mode = S_IRUGO,
- },
- .show = &virtual_keys_show,
- };
- static struct attribute *properties_attrs[] = {
- &virtual_keys_attr.attr,
- NULL
- };
- static struct attribute_group properties_attr_group = {
- .attrs = properties_attrs,
- };
- static void virtual_keys_init(void)
- {
- int ret;
- struct kobject *properties_kobj;
- properties_kobj = kobject_create_and_add("board_properties", NULL);
- if (properties_kobj)
- ret = sysfs_create_group(properties_kobj,
- &properties_attr_group);
- if (!properties_kobj || ret)
- pr_err("failed to create board_properties\n");
- }
- #endif
- </span>
其中.name = "virtualkeys.xxxx"的xxxx就是触摸屏设备名称,也就是前面说到的{deviceName},virtual_keys_init()函数可以在触摸屏probe函数中调用。另外,我将可视区域左侧的两侧按键移到了右侧实现,因此五个按键区域中心x坐标都是一样,这部分要在触摸屏驱动增加x轴坐标调整,这部分我就不再说明。以上步骤完成后可以使用 cat /sys/board_properties/virtualkeys.{deviceName}查看虚拟按键的配置文件,并试试按下触摸屏上按键是否有反应,如果坐标不正确还要进行耐心地校准。
- 具体的可以去HTC网站(http://htcdev.com/devcenter/downloads)上下载HTC手机的linux源码,HTC很多款手机的BACK,MENU,HOME,SEARCH电容屏虚拟按键都是采用这种方式实现的。
- (三)但是我用的是四线电阻触摸屏,用上面的方式好像没有任何反应,所以我采用最直接的方式用input_event发送按键消息,就是在触摸屏处理芯片TSC2007驱动中当读到一定范围内的触摸事件就发送按键消息:这种方式只要修改TSC2007驱动的几个地方:
- 1.定义全局局部变量用于记录是否有虚拟按键按下
- static int backkeydown=0;
- static int homekeydown=0;
- static int menukeydown=0;
- set_bit(EV_SYN, input_dev->evbit);
- set_bit(KEY_HOME, input_dev->keybit);
- //set_bit(KEY_SEARCH, input_dev->keybit);
- set_bit(KEY_BACK, input_dev->keybit);
- set_bit(KEY_MENU, input_dev->keybit);
- if((tc.y>=81)&&(tc.y<=181))
- {
- if((tc.x>=2711)&&(tc.x<=2832))
- {
- if(backkeydown==0)
- {
- input_event(input, EV_KEY,KEY_BACK, 1);
- backkeydown=1;
- //printk("back key down\n");
- }
- }
- else if((tc.x>=1891)&&(tc.x<=1933))
- {
- if(homekeydown==0)
- {
- input_event(input, EV_KEY,KEY_HOME, 1);
- homekeydown=1;
- //printk("home key down\n");
- }
- }
- else if((tc.x>=1088)&&(tc.x<=1143))
- {
- if(menukeydown==0)
- {
- input_event(input, EV_KEY,KEY_MENU, 1);
- menukeydown=1;
- //printk("menu key down\n");
- }
- }
- }
- if(backkeydown==1)
- {
- backkeydown=0;
- input_event(input, EV_KEY, KEY_BACK, 0);
- //printk("back key up\n");
- }
- if(homekeydown==1)
- {
- homekeydown=0;
- input_event(input, EV_KEY, KEY_HOME, 0);
- //printk("home key up\n");
- }
- if(menukeydown==1)
- {
- menukeydown=0;
- input_event(input, EV_KEY, KEY_MENU, 0);
- //printk("menu key up\n");
- }
整个修改后的TSC2007驱动如下:
- /*
- * drivers/input/touchscreen/tsc2007.c
- *
- * Copyright (c) 2008 MtekVision Co., Ltd.
- * Kwangwoo Lee <kwlee@mtekvision.com>
- *
- * Using code from:
- * - ads7846.c
- * Copyright (c) 2005 David Brownell
- * Copyright (c) 2006 Nokia Corporation
- * - corgi_ts.c
- * Copyright (C) 2004-2005 Richard Purdie
- * - omap_ts.[hc], ads7846.h, ts_osk.c
- * Copyright (C) 2002 MontaVista Software
- * Copyright (C) 2004 Texas Instruments
- * Copyright (C) 2005 Dirk Behme
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
- #include <linux/module.h>
- #include <linux/slab.h>
- #include <linux/input.h>
- #include <linux/interrupt.h>
- #include <linux/i2c.h>
- #include <linux/i2c/tsc2007.h>
- #define TS_POLL_DELAY 1 /* ms delay between samples */
- #define TS_POLL_PERIOD 1 /* ms delay between samples */
- #define TSC2007_MEASURE_TEMP0 (0x0 << 4)
- #define TSC2007_MEASURE_AUX (0x2 << 4)
- #define TSC2007_MEASURE_TEMP1 (0x4 << 4)
- #define TSC2007_ACTIVATE_XN (0x8 << 4)
- #define TSC2007_ACTIVATE_YN (0x9 << 4)
- #define TSC2007_ACTIVATE_YP_XN (0xa << 4)
- #define TSC2007_SETUP (0xb << 4)
- #define TSC2007_MEASURE_X (0xc << 4)
- #define TSC2007_MEASURE_Y (0xd << 4)
- #define TSC2007_MEASURE_Z1 (0xe << 4)
- #define TSC2007_MEASURE_Z2 (0xf << 4)
- #define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2)
- #define TSC2007_ADC_ON_IRQ_DIS0 (0x1 << 2)
- #define TSC2007_ADC_OFF_IRQ_EN (0x2 << 2)
- #define TSC2007_ADC_ON_IRQ_DIS1 (0x3 << 2)
- #define TSC2007_12BIT (0x0 << 1)
- #define TSC2007_8BIT (0x1 << 1)
- #define MAX_12BIT ((1 << 12) - 1)
- #define ADC_ON_12BIT (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
- #define READ_Y (ADC_ON_12BIT | TSC2007_MEASURE_Y)
- #define READ_Z1 (ADC_ON_12BIT | TSC2007_MEASURE_Z1)
- #define READ_Z2 (ADC_ON_12BIT | TSC2007_MEASURE_Z2)
- #define READ_X (ADC_ON_12BIT | TSC2007_MEASURE_X)
- #define PWRDOWN (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
- static int backkeydown=0;
- static int homekeydown=0;
- static int menukeydown=0;
- struct ts_event {
- u16 x;
- u16 y;
- u16 z1, z2;
- };
- struct tsc2007 {
- struct input_dev *input;
- char phys[32];
- struct delayed_work work;
- struct i2c_client *client;
- u16 model;
- u16 x_plate_ohms;
- bool pendown;
- int irq;
- int (*get_pendown_state)(void);
- void (*clear_penirq)(void);
- };
- static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
- {
- s32 data;
- u16 val;
- data = i2c_smbus_read_word_data(tsc->client, cmd);
- if (data < 0) {
- dev_err(&tsc->client->dev, "i2c io error: %d\n", data);
- return data;
- }
- /* The protocol and raw data format from i2c interface:
- * S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P
- * Where DataLow has [D11-D4], DataHigh has [D3-D0 << 4 | Dummy 4bit].
- */
- val = swab16(data) >> 4;
- dev_dbg(&tsc->client->dev, "data: 0x%x, val: 0x%x\n", data, val);
- return val;
- }
- static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc)
- {
- /* y- still on; turn on only y+ (and ADC) */
- tc->y = tsc2007_xfer(tsc, READ_Y);
- /* turn y- off, x+ on, then leave in lowpower */
- tc->x = tsc2007_xfer(tsc, READ_X);
- /* turn y+ off, x- on; we'll use formula #1 */
- tc->z1 = tsc2007_xfer(tsc, READ_Z1);
- tc->z2 = tsc2007_xfer(tsc, READ_Z2);
- //printk("x=%d,y=%d\n",tc->x,tc->y);
- /* Prepare for next touch reading - power down ADC, enable PENIRQ */
- tsc2007_xfer(tsc, PWRDOWN);
- }
- static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc)
- {
- u32 rt = 0;
- /* range filtering */
- if (tc->x == MAX_12BIT)
- tc->x = 0;
- if (likely(tc->x && tc->z1)) {
- /* compute touch pressure resistance using equation #1 */
- rt = tc->z2 - tc->z1;
- rt *= tc->x;
- rt *= tsc->x_plate_ohms;
- rt /= tc->z1;
- rt = (rt + 2047) >> 12;
- }
- return rt;
- }
- static void tsc2007_send_up_event(struct tsc2007 *tsc)
- {
- struct input_dev *input = tsc->input;
- dev_dbg(&tsc->client->dev, "UP\n");
- if(backkeydown==1)
- {
- backkeydown=0;
- input_event(input, EV_KEY, KEY_BACK, 0);
- //printk("back key up\n");
- }
- if(homekeydown==1)
- {
- homekeydown=0;
- input_event(input, EV_KEY, KEY_HOME, 0);
- //printk("home key up\n");
- }
- if(menukeydown==1)
- {
- menukeydown=0;
- input_event(input, EV_KEY, KEY_MENU, 0);
- //printk("menu key up\n");
- }
- input_report_key(input, BTN_TOUCH, 0);
- input_report_abs(input, ABS_PRESSURE, 0);
- input_sync(input);
- }
- static void tsc2007_work(struct work_struct *work)
- {
- struct tsc2007 *ts =
- container_of(to_delayed_work(work), struct tsc2007, work);
- struct ts_event tc;
- u32 rt;
- /*
- * NOTE: We can't rely on the pressure to determine the pen down
- * state, even though this controller has a pressure sensor.
- * The pressure value can fluctuate for quite a while after
- * lifting the pen and in some cases may not even settle at the
- * expected value.
- *
- * The only safe way to check for the pen up condition is in the
- * work function by reading the pen signal state (it's a GPIO
- * and IRQ). Unfortunately such callback is not always available,
- * in that case we have rely on the pressure anyway.
- */
- if (ts->get_pendown_state) {
- if (unlikely(!ts->get_pendown_state())) {
- tsc2007_send_up_event(ts);
- ts->pendown = false;
- goto out;
- }
- dev_dbg(&ts->client->dev, "pen is still down\n");
- }
- tsc2007_read_values(ts, &tc);
- rt = tsc2007_calculate_pressure(ts, &tc);
- if (rt > MAX_12BIT) {
- /*
- * Sample found inconsistent by debouncing or pressure is
- * beyond the maximum. Don't report it to user space,
- * repeat at least once more the measurement.
- */
- dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
- goto out;
- }
- if (rt) {
- struct input_dev *input = ts->input;
- if((tc.y>=81)&&(tc.y<=181))
- {
- if((tc.x>=2711)&&(tc.x<=2832))
- {
- if(backkeydown==0)
- {
- input_event(input, EV_KEY,KEY_BACK, 1);
- backkeydown=1;
- //printk("back key down\n");
- }
- }
- else if((tc.x>=1891)&&(tc.x<=1933))
- {
- if(homekeydown==0)
- {
- input_event(input, EV_KEY,KEY_HOME, 1);
- homekeydown=1;
- //printk("home key down\n");
- }
- }
- else if((tc.x>=1088)&&(tc.x<=1143))
- {
- if(menukeydown==0)
- {
- input_event(input, EV_KEY,KEY_MENU, 1);
- menukeydown=1;
- //printk("menu key down\n");
- }
- }
- }
- if (!ts->pendown) {
- dev_dbg(&ts->client->dev, "DOWN\n");
- input_report_key(input, BTN_TOUCH, 1);
- ts->pendown = true;
- }
- input_report_abs(input, ABS_X, tc.x);
- input_report_abs(input, ABS_Y, tc.y);
- input_report_abs(input, ABS_PRESSURE, rt);
- input_sync(input);
- dev_dbg(&ts->client->dev, "point(%4d,%4d), pressure (%4u)\n",
- tc.x, tc.y, rt);
- } else if (!ts->get_pendown_state && ts->pendown) {
- /*
- * We don't have callback to check pendown state, so we
- * have to assume that since pressure reported is 0 the
- * pen was lifted up.
- */
- tsc2007_send_up_event(ts);
- ts->pendown = false;
- }
- out:
- if (ts->pendown)
- schedule_delayed_work(&ts->work,
- msecs_to_jiffies(TS_POLL_PERIOD));
- else
- enable_irq(ts->irq);
- }
- static irqreturn_t tsc2007_irq(int irq, void *handle)
- {
- struct tsc2007 *ts = handle;
- if (!ts->get_pendown_state || likely(ts->get_pendown_state())) {
- disable_irq_nosync(ts->irq);
- schedule_delayed_work(&ts->work,
- msecs_to_jiffies(TS_POLL_DELAY));
- }
- if (ts->clear_penirq)
- ts->clear_penirq();
- return IRQ_HANDLED;
- }
- static void tsc2007_free_irq(struct tsc2007 *ts)
- {
- free_irq(ts->irq, ts);
- if (cancel_delayed_work_sync(&ts->work)) {
- /*
- * Work was pending, therefore we need to enable
- * IRQ here to balance the disable_irq() done in the
- * interrupt handler.
- */
- enable_irq(ts->irq);
- }
- }
- static int __devinit tsc2007_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
- {
- struct tsc2007 *ts;
- struct tsc2007_platform_data *pdata = pdata = client->dev.platform_data;
- struct input_dev *input_dev;
- int err;
- if (!pdata) {
- dev_err(&client->dev, "platform data is required!\n");
- return -EINVAL;
- }
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_READ_WORD_DATA))
- return -EIO;
- ts = kzalloc(sizeof(struct tsc2007), GFP_KERNEL);
- input_dev = input_allocate_device();
- if (!ts || !input_dev) {
- err = -ENOMEM;
- goto err_free_mem;
- }
- ts->client = client;
- ts->irq = client->irq;
- ts->input = input_dev;
- INIT_DELAYED_WORK(&ts->work, tsc2007_work);
- ts->model = pdata->model;
- ts->x_plate_ohms = pdata->x_plate_ohms;
- ts->get_pendown_state = pdata->get_pendown_state;
- ts->clear_penirq = pdata->clear_penirq;
- snprintf(ts->phys, sizeof(ts->phys),
- "%s/input0", dev_name(&client->dev));
- input_dev->name = "TSC2007";
- input_dev->phys = ts->phys;
- input_dev->id.vendor = 0x0001;
- input_dev->id.product = 0x0001;
- input_dev->id.version = 0x0100;
- input_dev->id.bustype = BUS_I2C;
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
- set_bit(EV_SYN, input_dev->evbit);
- set_bit(KEY_HOME, input_dev->keybit);
- //set_bit(KEY_SEARCH, input_dev->keybit);
- set_bit(KEY_BACK, input_dev->keybit);
- set_bit(KEY_MENU, input_dev->keybit);
- input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
- if (pdata->init_platform_hw)
- pdata->init_platform_hw();
- err = request_irq(ts->irq, tsc2007_irq, 0,
- client->dev.driver->name, ts);
- if (err < 0) {
- dev_err(&client->dev, "irq %d busy?\n", ts->irq);
- goto err_free_mem;
- }
- /* Prepare for touch readings - power down ADC and enable PENIRQ */
- err = tsc2007_xfer(ts, PWRDOWN);
- if (err < 0)
- goto err_free_irq;
- err = input_register_device(input_dev);
- if (err)
- goto err_free_irq;
- i2c_set_clientdata(client, ts);
- return 0;
- err_free_irq:
- tsc2007_free_irq(ts);
- if (pdata->exit_platform_hw)
- pdata->exit_platform_hw();
- err_free_mem:
- input_free_device(input_dev);
- kfree(ts);
- return err;
- }
- static int __devexit tsc2007_remove(struct i2c_client *client)
- {
- struct tsc2007 *ts = i2c_get_clientdata(client);
- struct tsc2007_platform_data *pdata = client->dev.platform_data;
- tsc2007_free_irq(ts);
- if (pdata->exit_platform_hw)
- pdata->exit_platform_hw();
- input_unregister_device(ts->input);
- kfree(ts);
- return 0;
- }
- static struct i2c_device_id tsc2007_idtable[] = {
- { "tsc2007", 0 },
- { }
- };
- MODULE_DEVICE_TABLE(i2c, tsc2007_idtable);
- static struct i2c_driver tsc2007_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "tsc2007"
- },
- .id_table = tsc2007_idtable,
- .probe = tsc2007_probe,
- .remove = __devexit_p(tsc2007_remove),
- };
- static int __init tsc2007_init(void)
- {
- return i2c_add_driver(&tsc2007_driver);
- }
- static void __exit tsc2007_exit(void)
- {
- i2c_del_driver(&tsc2007_driver);
- }
- module_init(tsc2007_init);
- module_exit(tsc2007_exit);
- MODULE_AUTHOR("Kwangwoo Lee <kwlee@mtekvision.com>");
- MODULE_DESCRIPTION("TSC2007 TouchScreen Driver");
- MODULE_LICENSE("GPL");
实践证明上述方式完全可行,这里我没有指定TSC2007的kl和kcm文件,android系统会自动选择默认的\android\sdk\emulator\keymaps\目录下的qwerty.kl和qwerty.kcm文件,如果你的系统不能正常收到按键消息,你首先可以用android的getevent看看驱动是否能正常发送按键消息给上层,如果能正常收到触摸屏驱动发送的按键消息,上层android系统不能收到的原因就是kl和kcm文件不对。
- /* TouchScreen */
- #define IRQ1 1
- unsigned int tsc2007_int;
- unsigned int tsc2007_irq_no;
- static int ts_get_pendown_state(void)
- {
- int result=!(imapx_gpio_getpin(tsc2007_int, IG_NORMAL));
- //printk("%d\n",result);
- return result;
- }
- static int ts_init(void)
- {
- //printk("====ts_init===\n");
- tsc2007_int = __imapx_name_to_gpio(CONFIG_TP_TSC2007_INT);
- if(tsc2007_int == IMAPX_GPIO_ERROR) {
- printk(KERN_ERR "failed to get tsc2007_int pin.\n");
- return -1;
- }
- tsc2007_irq_no = imapx_gpio_to_irq(tsc2007_int);
- imapx_gpio_setcfg(tsc2007_int, IG_INPUT, IG_NORMAL);
- imapx_gpio_setirq(tsc2007_int, FILTER_MAX, IG_FALL, 1);
- return 0;
- }
- struct tsc2007_platform_data tsc2007_info = {
- .model = 2007,
- .x_plate_ohms = 180,
- .get_pendown_state = ts_get_pendown_state,
- .init_platform_hw = ts_init,
- };
- static struct i2c_board_info ts_i2c_clients = {
- I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
- .platform_data = &tsc2007_info,
- .irq = IRQ1,
- };
- static int __init imap_arch_init(void)
- {
- int ret;
- // do the correct init for cpu
- if (cpu == NULL)
- panic("imap_arch_init: NULL cpu\n");
- ret = (cpu->init)();
- if (ret != 0)
- return ret;
- ret = platform_add_devices(imap_uart_devs, nr_uarts);
- if (ret != 0)
- return ret;
- /*瑙︽懜灞?/
- i2c_register_board_info(1, &ts_i2c_clients, 1);
- /*瑙︽懜灞忚櫄鎷熸寜閿?/
- //virtual_keys_init();
- printk(KERN_INFO "leaving imap_arch_init\n");
- return ret;