4.2 Gateway discovery and control
This section describes how DAE applications discover the information of the gateway and subsequently interacts with the gateway. The discovery of the IG and AG by the OITF are defined in section 10.1 of [PROT]. The discovery takes place prior to the DAE application being initialized.The information about the discovered gateways is made available to DAEapplications through the application/oipfGatewayInfo embedded object. DAE applications can use this gateway information to interact with the discovered gateways (e.g. IG, AG, CSP gateway and so on). The
application/oipfGatewayInfo embedded object SHALL be made accessible through the DOM with the interface
as defined in section 7.7.1.
Access to the functionality of the application/oipfGatewayInfo embedded object is privileged and SHALL adhere to the security requirements defined in section 10.1
4.2 网关的发现和配置
本节主要描述DAE应用如何发现网关信息并随后与之交互。从OITF发现AG,IG在【PROT】第10.1节中定义。发现阶段是在DAE应用初始化之前发生,发现的网关信息是通过application/oipfGatewayInfo 嵌入对象来告知DAE应用。DAE应用通过获得的网关信息与发现的网关(如IG,AG,CSPG等)之间进行交互。application/oipfGatewayInfo 嵌入对象应该能通过7.7.1节中定义的DOM接口访问(操作)。
访问application/oipfGatewayInfo嵌入对象功能是需要授权,并应遵守在10.1节中的安全定义要求。