通过GNS3 （Cisco 2691）debug ip ospf events

一、广播型网络

R1(config-if)#no shutdown 

R1(config-if)#
*Mar  1 00:25:25.239: OSPF: Interface FastEthernet0/0 going Up
*Mar  1 00:25:25.239: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
R1(config-if)# 
*Mar  1 00:25:27.215: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
*Mar  1 00:25:28.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
R1(config-if)#
*Mar  1 00:25:35.239: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
R1(config-if)#
*Mar  1 00:25:45.239: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
R1(config-if)#
*Mar  1 00:25:55.239: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
R1(config-if)#end
R1#
*Mar  1 00:26:01.775: %SYS-5-CONFIG_I: Configured from console by console
R1#
*Mar  1 00:26:05.239: OSPF: end of Wait on interface FastEthernet0/0
*Mar  1 00:26:05.239: OSPF: DR/BDR election on FastEthernet0/0 
*Mar  1 00:26:05.239: OSPF: Elect BDR 1.1.1.1
*Mar  1 00:26:05.239: OSPF: Elect DR 1.1.1.1
*Mar  1 00:26:05.239: OSPF: Elect BDR 0.0.0.0
*Mar  1 00:26:05.243: OSPF: Elect DR 1.1.1.1
*Mar  1 00:26:05.243:        DR: 1.1.1.1 (Id)   BDR: none 
*Mar  1 00:26:05.243: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
*Mar  1 00:26:05.743: OSPF: No full nbrs to build Net Lsa for interface FastEthernet0/0
R1#
*Mar  1 00:26:15.247: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
R1#
*Mar  1 00:26:25.247: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
R1#
*Mar  1 00:26:35.247: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
R1#
*Mar  1 00:26:45.247: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
R1#
*Mar  1 00:26:55.247: OSPF: Send hello to 224.0.0.5 area 0 on FastEthernet0/0 from 12.1.1.1
R1#no de

R1#no debug all

二、点到点型网络

 R3(config-if)#no shutdown 
R3(config-if)#
*Mar  1 00:22:26.587: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
R3(config-if)#
*Mar  1 00:22:26.599: OSPF: Interface Serial1/0 going Up
*Mar  1 00:22:26.599: OSPF: Send hello to 224.0.0.5 area 0 on Serial1/0 from 34.1.1.3
R3(config-if)#
*Mar  1 00:22:27.591: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
R3(config-if)#
*Mar  1 00:22:36.603: OSPF: Send hello to 224.0.0.5 area 0 on Serial1/0 from 34.1.1.3
R3(config-if)#
*Mar  1 00:22:46.603: OSPF: Send hello to 224.0.0.5 area 0 on Serial1/0 from 34.1.1.3
R3(config-if)#
*Mar  1 00:22:55.555: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
R3(config-if)#
*Mar  1 00:22:55.563: OSPF: Interface Serial1/0 going Down
R3(config-if)#