2*8键盘数码管显示实验

利用8051单片机控制的键盘数码管实验 单片机工作晶振为6M 对键值采取查询的方式

7279用来控制键盘和数码管DIGO DIG1作为行,SG-DP作为8列，7279控制信号cs 接到P10 clk 接到P14 dat 接到P15 key 接到P3.3（INT1）

#include<reg51.h> #include<absacc.h> #define uchar unsigned char sbit cs=P1^0; // cs P1.0 sbit clk=P1^4; // clk P1.4 sbit dat=P1^5; // data P1.5 sbit key=P3^3; // key P3.3 #define CMD_RESET 0xa4 //restart #define DECODE1 0xc8 //downlaod 1 #define CMD_READ 0x15 // read key #define BLINKCTL 0x88 // blink void long_delay(unsigned char i) { while(i--); } void long_delay1(void) { unsigned char i; for (i=0;i<30;i++); } void short_delay(void) { unsigned char i; for (i=0;i<3;i++); } void send_byte( unsigned char out_byte) { unsigned char i; cs=0; long_delay1(); for (i=0;i<8;i++) { if (out_byte&0x80) dat=1; else dat=0; clk=1; short_delay(); clk=0; short_delay(); out_byte=out_byte*2; } dat=0; } unsigned char receive_byte(void) { unsigned char i, in_byte; dat=1; /*设为输入状态*/ long_delay1(); for (i=0;i<8;i++) { clk=1; short_delay(); in_byte=in_byte*2; if(dat) in_byte=in_byte|0x01; clk=0; short_delay(); } dat=0; return (in_byte); } void write7279(unsigned char cmd, unsigned char dta) { send_byte (cmd); send_byte (dta); } unsigned char read7279(unsigned char command) { send_byte(command); return(receive_byte()); } void main() { uchar key_number; send_byte (CMD_RESET); while (1) { if (!key) /*等待键按下*/ { key_number=read7279(CMD_READ); write7279(DECODE1,key_number&0x0f); write7279(DECODE1+1,key_number/16); write7279(BLINKCTL,0xfc); long_delay(12000); } } }