STM32中PWM的参数配置

我们引用ST官方给出的F10xStd3.5的库中的TIM>PWM_Output中的例程来举例

可以看出配置pwm参数主要是俩个函数

PrescalerValue = (uint16_t) (SystemCoreClock / 24000000) - 1;
  /* Time base configuration */
  TIM_TimeBaseStructure.TIM_Period = 665;
  TIM_TimeBaseStructure.TIM_Prescaler = PrescalerValue;
  TIM_TimeBaseStructure.TIM_ClockDivision = 0;
  TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;

  TIM_TimeBaseInit(TIM3, &TIM_TimeBaseStructure);

  /* PWM1 Mode configuration: Channel1 */
  TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
  TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
  TIM_OCInitStructure.TIM_Pulse = CCR1_Val;
  TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;

  TIM_OC1Init(TIM3, &TIM_OCInitStructure);

你的频率f=(SystemCoreClock/(PrescalerValue+1))/Period

f*Period=SystemCoreClock/(Prescaler+1)

当SystemCoreClock取72M时 不妨取Prescaler为71 这样

f=1M/Period

而CRR1_Val是基于Period的占空比