docker 一键安装及安装 gitlab、Jenkins详细文档。

花晓木

已于 2023-07-25 10:19:46 修改

阅读量1.8k

点赞数 4

分类专栏： gitlab Jenkins docker 文章标签： docker 容器运维

于 2022-08-26 14:17:44 首次发布

本文链接：https://blog.csdn.net/yhl18931306541/article/details/126542342

版权

gitlab 同时被 3 个专栏收录

4 篇文章 0 订阅

订阅专栏

Jenkins

3 篇文章 0 订阅

订阅专栏

docker

2 篇文章 0 订阅

订阅专栏

一、安装docker

一键安装docker---------shell脚本

话不多说，直接上码。。。。

#!/bin/sh
set -e
# Docker CE for Linux installation script
#
# See https://docs.docker.com/engine/install/ for the installation steps.
#
# This script is meant for quick & easy install via:
#   $ curl -fsSL https://get.docker.com -o get-docker.sh
#   $ sh get-docker.sh
#
# For test builds (ie. release candidates):
#   $ curl -fsSL https://test.docker.com -o test-docker.sh
#   $ sh test-docker.sh
#
# NOTE: Make sure to verify the contents of the script
#       you downloaded matches the contents of install.sh
#       located at https://github.com/docker/docker-install
#       before executing.
#
# Git commit from https://github.com/docker/docker-install when
# the script was uploaded (Should only be modified by upload job):
SCRIPT_COMMIT_SHA="b2e29ef7a9a89840d2333637f7d1900a83e7153f"

# strip "v" prefix if present
VERSION="${VERSION#v}"

# The channel to install from:
#   * nightly
#   * test
#   * stable
#   * edge (deprecated)
DEFAULT_CHANNEL_VALUE="stable"
if [ -z "$CHANNEL" ]; then
	CHANNEL=$DEFAULT_CHANNEL_VALUE
fi

DEFAULT_DOWNLOAD_URL="https://download.docker.com"
if [ -z "$DOWNLOAD_URL" ]; then
	DOWNLOAD_URL=$DEFAULT_DOWNLOAD_URL
fi

DEFAULT_REPO_FILE="docker-ce.repo"
if [ -z "$REPO_FILE" ]; then
	REPO_FILE="$DEFAULT_REPO_FILE"
fi

mirror=''
DRY_RUN=${DRY_RUN:-}
while [ $# -gt 0 ]; do
	case "$1" in
		--mirror)
			mirror="$2"
			shift
			;;
		--dry-run)
			DRY_RUN=1
			;;
		--*)
			echo "Illegal option $1"
			;;
	esac
	shift $(( $# > 0 ? 1 : 0 ))
done

case "$mirror" in
	Aliyun)
		DOWNLOAD_URL="https://mirrors.aliyun.com/docker-ce"
		;;
	AzureChinaCloud)
		DOWNLOAD_URL="https://mirror.azure.cn/docker-ce"
		;;
esac

command_exists() {
	command -v "$@" > /dev/null 2>&1
}

# version_gte checks if the version specified in $VERSION is at least
# the given CalVer (YY.MM) version. returns 0 (success) if $VERSION is either
# unset (=latest) or newer or equal than the specified version. Returns 1 (fail)
# otherwise.
#
# examples:
#
# VERSION=20.10
# version_gte 20.10 // 0 (success)
# version_gte 19.03 // 0 (success)
# version_gte 21.10 // 1 (fail)
version_gte() {
	if [ -z "$VERSION" ]; then
			return 0
	fi
	eval calver_compare "$VERSION" "$1"
}

# calver_compare compares two CalVer (YY.MM) version strings. returns 0 (success)
# if version A is newer or equal than version B, or 1 (fail) otherwise. Patch
# releases and pre-release (-alpha/-beta) are not taken into account
#
# examples:
#
# calver_compare 20.10 19.03 // 0 (success)
# calver_compare 20.10 20.10 // 0 (success)
# calver_compare 19.03 20.10 // 1 (fail)
calver_compare() (
	set +x

	yy_a="$(echo "$1" | cut -d'.' -f1)"
	yy_b="$(echo "$2" | cut -d'.' -f1)"
	if [ "$yy_a" -lt "$yy_b" ]; then
		return 1
	fi
	if [ "$yy_a" -gt "$yy_b" ]; then
		return 0
	fi
	mm_a="$(echo "$1" | cut -d'.' -f2)"
	mm_b="$(echo "$2" | cut -d'.' -f2)"
	if [ "${mm_a#0}" -lt "${mm_b#0}" ]; then
		return 1
	fi

	return 0
)

is_dry_run() {
	if [ -z "$DRY_RUN" ]; then
		return 1
	else
		return 0
	fi
}

is_wsl() {
	case "$(uname -r)" in
	*microsoft* ) true ;; # WSL 2
	*Microsoft* ) true ;; # WSL 1
	* ) false;;
	esac
}

is_darwin() {
	case "$(uname -s)" in
	*darwin* ) true ;;
	*Darwin* ) true ;;
	* ) false;;
	esac
}

deprecation_notice() {
	distro=$1
	distro_version=$2
	echo
	printf "\033[91;1mDEPRECATION WARNING\033[0m\n"
	printf "    This Linux distribution (\033[1m%s %s\033[0m) reached end-of-life and is no longer supported by this script.\n" "$distro" "$distro_version"
	echo   "    No updates or security fixes will be released for this distribution, and users are recommended"
	echo   "    to upgrade to a currently maintained version of $distro."
	echo
	printf   "Press \033[1mCtrl+C\033[0m now to abort this script, or wait for the installation to continue."
	echo
	sleep 10
}

get_distribution() {
	lsb_dist=""
	# Every system that we officially support has /etc/os-release
	if [ -r /etc/os-release ]; then
		lsb_dist="$(. /etc/os-release && echo "$ID")"
	fi
	# Returning an empty string here should be alright since the
	# case statements don't act unless you provide an actual value
	echo "$lsb_dist"
}

echo_docker_as_nonroot() {
	if is_dry_run; then
		return
	fi
	if command_exists docker && [ -e /var/run/docker.sock ]; then
		(
			set -x
			$sh_c 'docker version'
		) || true
	fi

	# intentionally mixed spaces and tabs here -- tabs are stripped by "<<-EOF", spaces are kept in the output
	echo
	echo "================================================================================"
	echo
	if version_gte "20.10"; then
		echo "To run Docker as a non-privileged user, consider setting up the"
		echo "Docker daemon in rootless mode for your user:"
		echo
		echo "    dockerd-rootless-setuptool.sh install"
		echo
		echo "Visit https://docs.docker.com/go/rootless/ to learn about rootless mode."
		echo
	fi
	echo
	echo "To run the Docker daemon as a fully privileged service, but granting non-root"
	echo "users access, refer to https://docs.docker.com/go/daemon-access/"
	echo
	echo "WARNING: Access to the remote API on a privileged Docker daemon is equivalent"
	echo "         to root access on the host. Refer to the 'Docker daemon attack surface'"
	echo "         documentation for details: https://docs.docker.com/go/attack-surface/"
	echo
	echo "================================================================================"
	echo
}

# Check if this is a forked Linux distro
check_forked() {

	# Check for lsb_release command existence, it usually exists in forked distros
	if command_exists lsb_release; then
		# Check if the `-u` option is supported
		set +e
		lsb_release -a -u > /dev/null 2>&1
		lsb_release_exit_code=$?
		set -e

		# Check if the command has exited successfully, it means we're in a forked distro
		if [ "$lsb_release_exit_code" = "0" ]; then
			# Print info about current distro
			cat <<-EOF
			You're using '$lsb_dist' version '$dist_version'.
			EOF

			# Get the upstream release info
			lsb_dist=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'id' | cut -d ':' -f 2 | tr -d '[:space:]')
			dist_version=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'codename' | cut -d ':' -f 2 | tr -d '[:space:]')

			# Print info about upstream distro
			cat <<-EOF
			Upstream release is '$lsb_dist' version '$dist_version'.
			EOF
		else
			if [ -r /etc/debian_version ] && [ "$lsb_dist" != "ubuntu" ] && [ "$lsb_dist" != "raspbian" ]; then
				if [ "$lsb_dist" = "osmc" ]; then
					# OSMC runs Raspbian
					lsb_dist=raspbian
				else
					# We're Debian and don't even know it!
					lsb_dist=debian
				fi
				dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
				case "$dist_version" in
					11)
						dist_version="bullseye"
					;;
					10)
						dist_version="buster"
					;;
					9)
						dist_version="stretch"
					;;
					8)
						dist_version="jessie"
					;;
				esac
			fi
		fi
	fi
}

do_install() {
	echo "# Executing docker install script, commit: $SCRIPT_COMMIT_SHA"

	if command_exists docker; then
		cat >&2 <<-'EOF'
			Warning: the "docker" command appears to already exist on this system.

			If you already have Docker installed, this script can cause trouble, which is
			why we're displaying this warning and provide the opportunity to cancel the
			installation.

			If you installed the current Docker package using this script and are using it
			again to update Docker, you can safely ignore this message.

			You may press Ctrl+C now to abort this script.
		EOF
		( set -x; sleep 20 )
	fi

	user="$(id -un 2>/dev/null || true)"

	sh_c='sh -c'
	if [ "$user" != 'root' ]; then
		if command_exists sudo; then
			sh_c='sudo -E sh -c'
		elif command_exists su; then
			sh_c='su -c'
		else
			cat >&2 <<-'EOF'
			Error: this installer needs the ability to run commands as root.
			We are unable to find either "sudo" or "su" available to make this happen.
			EOF
			exit 1
		fi
	fi

	if is_dry_run; then
		sh_c="echo"
	fi

	# perform some very rudimentary platform detection
	lsb_dist=$( get_distribution )
	lsb_dist="$(echo "$lsb_dist" | tr '[:upper:]' '[:lower:]')"

	if is_wsl; then
		echo
		echo "WSL DETECTED: We recommend using Docker Desktop for Windows."
		echo "Please get Docker Desktop from https://www.docker.com/products/docker-desktop"
		echo
		cat >&2 <<-'EOF'

			You may press Ctrl+C now to abort this script.
		EOF
		( set -x; sleep 20 )
	fi

	case "$lsb_dist" in

		ubuntu)
			if command_exists lsb_release; then
				dist_version="$(lsb_release --codename | cut -f2)"
			fi
			if [ -z "$dist_version" ] && [ -r /etc/lsb-release ]; then
				dist_version="$(. /etc/lsb-release && echo "$DISTRIB_CODENAME")"
			fi
		;;

		debian|raspbian)
			dist_version="$(sed 's/\/.*//' /etc/debian_version | sed 's/\..*//')"
			case "$dist_version" in
				11)
					dist_version="bullseye"
				;;
				10)
					dist_version="buster"
				;;
				9)
					dist_version="stretch"
				;;
				8)
					dist_version="jessie"
				;;
			esac
		;;

		centos|rhel|sles)
			if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
				dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
			fi
		;;

		*)
			if command_exists lsb_release; then
				dist_version="$(lsb_release --release | cut -f2)"
			fi
			if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
				dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
			fi
		;;

	esac

	# Check if this is a forked Linux distro
	check_forked

	# Print deprecation warnings for distro versions that recently reached EOL,
	# but may still be commonly used (especially LTS versions).
	case "$lsb_dist.$dist_version" in
		debian.stretch|debian.jessie)
			deprecation_notice "$lsb_dist" "$dist_version"
			;;
		raspbian.stretch|raspbian.jessie)
			deprecation_notice "$lsb_dist" "$dist_version"
			;;
		ubuntu.xenial|ubuntu.trusty)
			deprecation_notice "$lsb_dist" "$dist_version"
			;;
		fedora.*)
			if [ "$dist_version" -lt 33 ]; then
				deprecation_notice "$lsb_dist" "$dist_version"
			fi
			;;
	esac

	# Run setup for each distro accordingly
	case "$lsb_dist" in
		ubuntu|debian|raspbian)
			pre_reqs="apt-transport-https ca-certificates curl"
			if ! command -v gpg > /dev/null; then
				pre_reqs="$pre_reqs gnupg"
			fi
			apt_repo="deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] $DOWNLOAD_URL/linux/$lsb_dist $dist_version $CHANNEL"
			(
				if ! is_dry_run; then
					set -x
				fi
				$sh_c 'apt-get update -qq >/dev/null'
				$sh_c "DEBIAN_FRONTEND=noninteractive apt-get install -y -qq $pre_reqs >/dev/null"
				$sh_c 'mkdir -p /etc/apt/keyrings && chmod -R 0755 /etc/apt/keyrings'
				$sh_c "curl -fsSL \"$DOWNLOAD_URL/linux/$lsb_dist/gpg\" | gpg --dearmor --yes -o /etc/apt/keyrings/docker.gpg"
				$sh_c "chmod a+r /etc/apt/keyrings/docker.gpg"
				$sh_c "echo \"$apt_repo\" > /etc/apt/sources.list.d/docker.list"
				$sh_c 'apt-get update -qq >/dev/null'
			)
			pkg_version=""
			if [ -n "$VERSION" ]; then
				if is_dry_run; then
					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
				else
					# Will work for incomplete versions IE (17.12), but may not actually grab the "latest" if in the test channel
					pkg_pattern="$(echo "$VERSION" | sed "s/-ce-/~ce~.*/g" | sed "s/-/.*/g").*-0~$lsb_dist"
					search_command="apt-cache madison 'docker-ce' | grep '$pkg_pattern' | head -1 | awk '{\$1=\$1};1' | cut -d' ' -f 3"
					pkg_version="$($sh_c "$search_command")"
					echo "INFO: Searching repository for VERSION '$VERSION'"
					echo "INFO: $search_command"
					if [ -z "$pkg_version" ]; then
						echo
						echo "ERROR: '$VERSION' not found amongst apt-cache madison results"
						echo
						exit 1
					fi
					if version_gte "18.09"; then
							search_command="apt-cache madison 'docker-ce-cli' | grep '$pkg_pattern' | head -1 | awk '{\$1=\$1};1' | cut -d' ' -f 3"
							echo "INFO: $search_command"
							cli_pkg_version="=$($sh_c "$search_command")"
					fi
					pkg_version="=$pkg_version"
				fi
			fi
			(
				pkgs="docker-ce${pkg_version%=}"
				if version_gte "18.09"; then
						# older versions didn't ship the cli and containerd as separate packages
						pkgs="$pkgs docker-ce-cli${cli_pkg_version%=} containerd.io"
				fi
				if version_gte "20.10"; then
						pkgs="$pkgs docker-compose-plugin"
				fi
				if version_gte "20.10" && [ "$(uname -m)" = "x86_64" ]; then
						# also install the latest version of the "docker scan" cli-plugin (only supported on x86 currently)
						pkgs="$pkgs docker-scan-plugin"
				fi
				# TODO(thaJeztah) remove the $CHANNEL check once 22.06 and docker-buildx-plugin is published to the "stable" channel
				if [ "$CHANNEL" = "test" ] && version_gte "22.06"; then
						pkgs="$pkgs docker-buildx-plugin"
				fi
				if ! is_dry_run; then
					set -x
				fi
				$sh_c "DEBIAN_FRONTEND=noninteractive apt-get install -y -qq --no-install-recommends $pkgs >/dev/null"
				if version_gte "20.10"; then
					# Install docker-ce-rootless-extras without "--no-install-recommends", so as to install slirp4netns when available
					$sh_c "DEBIAN_FRONTEND=noninteractive apt-get install -y -qq docker-ce-rootless-extras${pkg_version%=} >/dev/null"
				fi
			)
			echo_docker_as_nonroot
			exit 0
			;;
		centos|fedora|rhel)
			if [ "$(uname -m)" != "s390x" ] && [ "$lsb_dist" = "rhel" ]; then
				echo "Packages for RHEL are currently only available for s390x."
				exit 1
			fi
			yum_repo="$DOWNLOAD_URL/linux/$lsb_dist/$REPO_FILE"
			if ! curl -Ifs "$yum_repo" > /dev/null; then
				echo "Error: Unable to curl repository file $yum_repo, is it valid?"
				exit 1
			fi
			if [ "$lsb_dist" = "fedora" ]; then
				pkg_manager="dnf"
				config_manager="dnf config-manager"
				enable_channel_flag="--set-enabled"
				disable_channel_flag="--set-disabled"
				pre_reqs="dnf-plugins-core"
				pkg_suffix="fc$dist_version"
			else
				pkg_manager="yum"
				config_manager="yum-config-manager"
				enable_channel_flag="--enable"
				disable_channel_flag="--disable"
				pre_reqs="yum-utils"
				pkg_suffix="el"
			fi
			(
				if ! is_dry_run; then
					set -x
				fi
				$sh_c "$pkg_manager install -y -q $pre_reqs"
				$sh_c "$config_manager --add-repo $yum_repo"

				if [ "$CHANNEL" != "stable" ]; then
					$sh_c "$config_manager $disable_channel_flag docker-ce-*"
					$sh_c "$config_manager $enable_channel_flag docker-ce-$CHANNEL"
				fi
				$sh_c "$pkg_manager makecache"
			)
			pkg_version=""
			if [ -n "$VERSION" ]; then
				if is_dry_run; then
					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
				else
					pkg_pattern="$(echo "$VERSION" | sed "s/-ce-/\\\\.ce.*/g" | sed "s/-/.*/g").*$pkg_suffix"
					search_command="$pkg_manager list --showduplicates 'docker-ce' | grep '$pkg_pattern' | tail -1 | awk '{print \$2}'"
					pkg_version="$($sh_c "$search_command")"
					echo "INFO: Searching repository for VERSION '$VERSION'"
					echo "INFO: $search_command"
					if [ -z "$pkg_version" ]; then
						echo
						echo "ERROR: '$VERSION' not found amongst $pkg_manager list results"
						echo
						exit 1
					fi
					if version_gte "18.09"; then
						# older versions don't support a cli package
						search_command="$pkg_manager list --showduplicates 'docker-ce-cli' | grep '$pkg_pattern' | tail -1 | awk '{print \$2}'"
						cli_pkg_version="$($sh_c "$search_command" | cut -d':' -f 2)"
					fi
					# Cut out the epoch and prefix with a '-'
					pkg_version="-$(echo "$pkg_version" | cut -d':' -f 2)"
				fi
			fi
			(
				pkgs="docker-ce$pkg_version"
				if version_gte "18.09"; then
					# older versions didn't ship the cli and containerd as separate packages
					if [ -n "$cli_pkg_version" ]; then
						pkgs="$pkgs docker-ce-cli-$cli_pkg_version containerd.io"
					else
						pkgs="$pkgs docker-ce-cli containerd.io"
					fi
				fi
				if version_gte "20.10" && [ "$(uname -m)" = "x86_64" ]; then
						# also install the latest version of the "docker scan" cli-plugin (only supported on x86 currently)
						pkgs="$pkgs docker-scan-plugin"
				fi
				if version_gte "20.10"; then
					pkgs="$pkgs docker-compose-plugin docker-ce-rootless-extras$pkg_version"
				fi
				# TODO(thaJeztah) remove the $CHANNEL check once 22.06 and docker-buildx-plugin is published to the "stable" channel
				if [ "$CHANNEL" = "test" ] && version_gte "22.06"; then
						pkgs="$pkgs docker-buildx-plugin"
				fi
				if ! is_dry_run; then
					set -x
				fi
				$sh_c "$pkg_manager install -y -q $pkgs"
			)
			echo_docker_as_nonroot
			exit 0
			;;
		sles)
			if [ "$(uname -m)" != "s390x" ]; then
				echo "Packages for SLES are currently only available for s390x"
				exit 1
			fi

			sles_version="${dist_version##*.}"
			sles_repo="$DOWNLOAD_URL/linux/$lsb_dist/$REPO_FILE"
			opensuse_repo="https://download.opensuse.org/repositories/security:SELinux/SLE_15_SP$sles_version/security:SELinux.repo"
			if ! curl -Ifs "$sles_repo" > /dev/null; then
				echo "Error: Unable to curl repository file $sles_repo, is it valid?"
				exit 1
			fi
			pre_reqs="ca-certificates curl libseccomp2 awk"
			(
				if ! is_dry_run; then
					set -x
				fi
				$sh_c "zypper install -y $pre_reqs"
				$sh_c "zypper addrepo $sles_repo"
				if ! is_dry_run; then
						cat >&2 <<-'EOF'
						WARNING!!
						openSUSE repository (https://download.opensuse.org/repositories/security:SELinux) will be enabled now.
						Do you wish to continue?
						You may press Ctrl+C now to abort this script.
						EOF
						( set -x; sleep 30 )
				fi
				$sh_c "zypper addrepo $opensuse_repo"
				$sh_c "zypper --gpg-auto-import-keys refresh"
				$sh_c "zypper lr -d"
			)
			pkg_version=""
			if [ -n "$VERSION" ]; then
				if is_dry_run; then
					echo "# WARNING: VERSION pinning is not supported in DRY_RUN"
				else
					pkg_pattern="$(echo "$VERSION" | sed "s/-ce-/\\\\.ce.*/g" | sed "s/-/.*/g")"
					search_command="zypper search -s --match-exact 'docker-ce' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
					pkg_version="$($sh_c "$search_command")"
					echo "INFO: Searching repository for VERSION '$VERSION'"
					echo "INFO: $search_command"
					if [ -z "$pkg_version" ]; then
						echo
						echo "ERROR: '$VERSION' not found amongst zypper list results"
						echo
						exit 1
					fi
					search_command="zypper search -s --match-exact 'docker-ce-cli' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
					# It's okay for cli_pkg_version to be blank, since older versions don't support a cli package
					cli_pkg_version="$($sh_c "$search_command")"
					pkg_version="-$pkg_version"

					search_command="zypper search -s --match-exact 'docker-ce-rootless-extras' | grep '$pkg_pattern' | tail -1 | awk '{print \$6}'"
					rootless_pkg_version="$($sh_c "$search_command")"
					rootless_pkg_version="-$rootless_pkg_version"
				fi
			fi
			(
				pkgs="docker-ce$pkg_version"
				if version_gte "18.09"; then
					if [ -n "$cli_pkg_version" ]; then
						# older versions didn't ship the cli and containerd as separate packages
						pkgs="$pkgs docker-ce-cli-$cli_pkg_version containerd.io"
					else
						pkgs="$pkgs docker-ce-cli containerd.io"
					fi
				fi
				if version_gte "20.10"; then
					pkgs="$pkgs docker-compose-plugin docker-ce-rootless-extras$pkg_version"
				fi
				# TODO(thaJeztah) remove the $CHANNEL check once 22.06 and docker-buildx-plugin is published to the "stable" channel
				if [ "$CHANNEL" = "test" ] && version_gte "22.06"; then
						pkgs="$pkgs docker-buildx-plugin"
				fi
				if ! is_dry_run; then
					set -x
				fi
				$sh_c "zypper -q install -y $pkgs"
			)
			echo_docker_as_nonroot
			exit 0
			;;
		*)
			if [ -z "$lsb_dist" ]; then
				if is_darwin; then
					echo
					echo "ERROR: Unsupported operating system 'macOS'"
					echo "Please get Docker Desktop from https://www.docker.com/products/docker-desktop"
					echo
					exit 1
				fi
			fi
			echo
			echo "ERROR: Unsupported distribution '$lsb_dist'"
			echo
			exit 1
			;;
	esac
	exit 1
}

# wrapped up in a function so that we have some protection against only getting
# half the file during "curl | sh"
do_install

复制以上shell代码到需要安装docker的服务器上

执行脚本（我将脚本名称指定为docker.sh）
[root@localhost]# bash  docker.sh
#重启
[root@localhost]# systemctl restart docker.service
#开机启动
[root@localhost]# systemctl enable docker.service
#查看是否启动
[root@localhost]# systemctl status docker.service
至此docker 安装完成。

还有一种安装docker方法：

下载安装包：
链接：https://pan.baidu.com/s/1K067k3j2xqamRwRkuFzObQ
提取码：8888

将下载的安装包及脚本文件上传到服务器中
安装docker

./install.sh -f docker-20.10.6.tgz

在这里插入图片描述
安装完成

优化镜像拉取慢的问题：
新建文件：

vim /etc/docker/daemon.json 
{
  "registry-mirrors": [
  "https://docker.mirrors.ustc.edu.cn",
  "https://registry.docker-cn.com",
  "http://hub-mirror.c.163.com",
  "https://9cpn8tt6.mirror.aliyuncs.com"
],
"max-concurrent-downloads": 10,
"log-driver": "json-file",
"log-level": "warn",
"log-opts": {
"max-size": "10m",
"max-file": "3"
},
"data-root": "/var/lib/docker"
}

#重启
[root@localhost]# systemctl restart docker.service
#开机启动
[root@localhost]# systemctl enable docker.service
#查看是否启动
[root@localhost]# systemctl status docker.service

至此docker 安装完成。

两种安装方式选其一即可。

二、安装gitlab

拉取镜像

docker pull beginor/gitlab-ce:11.0.1-ce.0
docker images   ## 查看镜像

在这里插入图片描述

创建挂载目录

mkdir -p /data/gitlab/etc
mkdir -p /data/gitlab/log
mkdir -p /data/gitlab/data

启动容器

docker run --detach \
--publish 8443:443 --publish 8090:80 \
--name gitlab \
--restart unless-stopped  \
-v /data/gitlab/etc:/etc/gitlab \
-v /data/gitlab/log:/var/log/gitlab \
-v /data/gitlab/data:/var/opt/gitlab \
beginor/gitlab-ce:11.0.1-ce.0

查看

docker ps -a

在这里插入图片描述

然后修改配置文件，将external_url 参数修改为本机IP地址或者主机名称
修改一：

vim  /data/gitlab/etc/gitlab.rb
## GitLab URL
##! URL on which GitLab will be reachable.
##! For more details on configuring external_url see:
##! https://docs.gitlab.com/omnibus/settings/configuration.html#configuring-the-external-url-for-gitlab
# external_url 'GENERATED_EXTERNAL_URL'
external_url 'http://192.168.45.134/'

在这里插入图片描述

修改二：修改 host、port、https等3个参数如下

vim /data/gitlab/data/gitlab-rails/etc/gitlab.yml
gitlab:
	## Web server settings (note: host is the FQDN, do not include http://)
	# host: 3e63caa45553
    # port: 80
    # https: false
  		host: 192.168.45.134
 		port: 8090
  		https: false

在这里插入图片描述
重启容器

docker restart gitlab

修改密码

# 进入容器内部
docker exec -it gitlab /bin/bash
# 进入控制台
gitlab-rails console -e production
# 查询id为1的用户，id为1的用户是超级管理员
user = User.where(id:1).first
# 修改密码为123456
user.password='123456'
# 保存
user.save!
# 退出
exit;

也可以 用 下面 命令直接查找 root 初始化密码 然后在页面手动修改
docker exec -it gitlab-dev grep ‘Password:’ /etc/gitlab/initial_root_password

访问页面：http://192.168.45.134:8090
在这里插入图片描述

docker 常用命令

docker stop gitlab 	//容器外停止
docker restart gitlab  	//容器外重启
docker exec -it gitlab bash  //进入容器命令行
gitlab-ctl reconfigure //容器中应用配置，让修改后的配置生效
gitlab-ctl restart   	//容器中重启服务

gitlab 常用命令

gitlab-ctl status: 	 		查看gitlab组件状态
gitlab-ctl start:  			启动全部服务
gitlab-ctl restart: 	 	重启全部服务
gitlab-ctl stop：		    停止全部服务
gitlab-ctl tail <service name>  查看服务的日志		
gitlab-ctl reconfigure:  	使配置文件生效（一般修改完主配置文件/etc/gitlab/gitlab.rb，需要执行此命令）
gitlab-ctl show-config:	    验证配置文件

参考地址：https://www.xjx100.cn/news/419460.html?action=onClick

三、安装 Jenkins 方式一：

拉取镜像

docker pull jenkinszh/jenkins-zh    #中文版
docker pull jenkinszh/jenkins         #英文版
查看镜像
docker images

在这里插入图片描述

创建一个文件夹用来存放Jenkins的数据：/data/soft/jenkins_home用来映射Jenkins的地址，修改权限为777

mkdir -p /data/soft/jenkins_home
chmod -R 777  /data/soft/

运行Jenkins

docker run -itd --name jenkins \
-p 8888:8080 -p 50000:50000 \
--restart always -e JAVA_OPTS=-Duser.timezone=Asia/Shanghai  \
-v /data/soft/jenkins_home:/var/jenkins_home	 \
-v /usr/local/maven/apache-maven-3.6.3:/usr/local/maven  \
-v /etc/localtime:/etc/localtime \
jenkinszh/jenkins-zh

访问 Jenkins

http://192.168.45.134:8888

在这里插入图片描述

find  / -name 'initialAdminPassword'
/data/soft/jenkins_home/secrets/initialAdminPassword

cat  /data/soft/jenkins_home/secrets/initialAdminPassword
6d111e629a49404dadb5e5da392f80e6

三、安装 Jenkins 方式二：

指定版本安装：
[root@nova1 ]# docker run -d --name jenkins \
-p 8080:8080 -p 50000:50000  --restart always -e  \
JAVA_OPTS=-Duser.timezone=Asia/Shanghai  \
-v /data/soft/jenkins_home:/var/jenkins_home \
-v /usr/local/maven/apache-maven-3.6.3:/usr/local/maven  \
-v /etc/localtime:/etc/localtime \
jenkins/jenkins:2.415

安装插件

点击 Manage Jenkins  找到 Manage Plugins 点击

报错：
There were errors checking the update sites: SocketTimeoutException: connect timed out

点击 Plugin Manager   ---> Advanced 最下方找到  Update Site 
访问一下这个 URL 
https://updates.jenkins-zh.cn/update-center.json
如果 http可以访问 https 不行的话， 就将url地址 https 修改一下 改为 http
如果地址不能访问。则修改地址，目前使用地址为
https://mirrors.tuna.tsinghua.edu.cn/jenkins/updates/update-center.json
修改完地址，点击 Submit 在点击 Check now 完成

如图：

在这里插入图片描述

安装插件

Localization: Chinese (Simplified)
Git Parameter

如图：搜索

在这里插入图片描述

最下方选中安装完成后重启Jenkins

在这里插入图片描述

如果报错jenkins 版本低  升级版本
### 注意，要先测试。

访问 ：https://mirrors.jenkins.io/war/latest/
下载 jenkins.war  
  
将war包传到docker里面
[root@nova1 ~]# docker cp jenkins.war jenkins:/root
替换
[root@nova1 ~]# docker exec -it -u root jenkins /bin/bash
root@4ad68e10b665:~# ls
jenkins.war
root@4ad68e10b665:~# find / -name 'jenkins.war'
/usr/share/jenkins/jenkins.war
/root/jenkins.war
root@4ad68e10b665:~# mv /usr/share/jenkins/jenkins.war /opt/
root@4ad68e10b665:~# mv jenkins.war /usr/share/jenkins/jenkins.war

[root@nova1 ~]# docker stop jenkins
jenkins
[root@nova1 ~]# docker start jenkins
jenkins

镜像下载地址

docker地址：
http://www.jenkins.org.cn/  
rpm镜像地址：
https://mirrors.jenkins-ci.org/

上面两种方式都是使用docker安装的，如果要使用rpm安装 直接 yum install  rpm包即可

以上 gitlab 与 Jenkins 安装完成

花晓木

关注

4
点赞
踩
6

收藏

觉得还不错? 一键收藏
2
评论
docker 一键安装及安装 gitlab、Jenkins详细文档。

一键安装docker 及安装 gitlab、Jenkins 详细文档
复制链接

扫一扫

专栏目录

docker 一键安装 及 安装 gitlab、Jenkins详细文档。

一、安装docker

一键安装docker---------shell脚本

还有一种安装docker方法：

二、安装gitlab

三、安装 Jenkins 方式一：

三、安装 Jenkins 方式二：

如图：

安装插件

如图：搜索

最下方选中 安装完成后重启Jenkins

镜像下载地址

“相关推荐”对你有帮助么？

docker 一键安装及安装 gitlab、Jenkins详细文档。

最下方选中安装完成后重启Jenkins