dbcp配置选项

 

testOnBorrow默认为true, 要设置为false.  若设置validationQuery则对性能影响比较大.

testWhileIdle默认为false,设置为true.并设置validationQuery

maxIdle最好设置为与maxActive一样。

initialSize与minIdle按业务要求配置，一般都要配置。

timeBetweenEvictionRunsMillis默认为-1.设置一定数值300000

numTestsPerEvictionRun默认是3, 这个值要调大点maxActive的一半较好。 

 

以下apache dbcp的配置项

 

Parameters

---

Parameter	Description
username	The connection username to be passed to our JDBC driver to establish a connection.
password	The connection password to be passed to our JDBC driver to establish a connection.
url	The connection URL to be passed to our JDBC driver to establish a connection.
driverClassName	The fully qualified Java class name of the JDBC driver to be used.
connectionProperties	The connection properties that will be sent to our JDBC driver when establishing new connections.  Format of the string must be [propertyName=property;]*  NOTE - The "user" and "password" properties will be passed explicitly, so they do not need to be included here.

---

Parameter	Default	Description
defaultAutoCommit	true	The default auto-commit state of connections created by this pool.
defaultReadOnly	driver default	The default read-only state of connections created by this pool. If not set then the setReadOnly method will not be called. (Some drivers don't support read only mode, ex: Informix)
defaultTransactionIsolation	driver default	The default TransactionIsolation state of connections created by this pool. One of the following: (see javadoc) NONE READ_COMMITTED READ_UNCOMMITTED REPEATABLE_READ SERIALIZABLE
defaultCatalog		The default catalog of connections created by this pool.

---

Parameter	Default	Description
initialSize	0	The initial number of connections that are created when the pool is started.  Since: 1.2
maxActive	8	The maximum number of active connections that can be allocated from this pool at the same time, or negative for no limit.
maxIdle	8	The maximum number of connections that can remain idle in the pool, without extra ones being released, or negative for no limit.
minIdle	0	The minimum number of connections that can remain idle in the pool, without extra ones being created, or zero to create none.
maxWait	indefinitely	The maximum number of milliseconds that the pool will wait (when there are no available connections) for a connection to be returned before throwing an exception, or -1 to wait indefinitely.

NOTE: If maxIdle is set too low on heavily loaded systems it is possible you will see connections being closed and almost immediately new connections being opened. This is a result of the active threads momentarily closing connections faster than they are opening them, causing the number of idle connections to rise above maxIdle. The best value for maxIdle for heavily loaded system will vary but the default is a good starting point.

---

Parameter	Default	Description
validationQuery		The SQL query that will be used to validate connections from this pool before returning them to the caller. If specified, this query MUST be an SQL SELECT statement that returns at least one row.
testOnBorrow	true	The indication of whether objects will be validated before being borrowed from the pool. If the object fails to validate, it will be dropped from the pool, and we will attempt to borrow another. NOTE - for a true value to have any effect, thevalidationQuery parameter must be set to a non-null string.
testOnReturn	false	The indication of whether objects will be validated before being returned to the pool.  NOTE - for a true value to have any effect, thevalidationQuery parameter must be set to a non-null string.
testWhileIdle	false	The indication of whether objects will be validated by the idle object evictor (if any). If an object fails to validate, it will be dropped from the pool.  NOTE - for a true value to have any effect, thevalidationQuery parameter must be set to a non-null string.
timeBetweenEvictionRunsMillis	-1	The number of milliseconds to sleep between runs of the idle object evictor thread. When non-positive, no idle object evictor thread will be run.
numTestsPerEvictionRun	3	The number of objects to examine during each run of the idle object evictor thread (if any).
minEvictableIdleTimeMillis	1000 * 60 * 30	The minimum amount of time an object may sit idle in the pool before it is eligable for eviction by the idle object evictor (if any).
connectionInitSqls  NOTE: Versions 1.3 and 1.4 of DBCP incorrectly use "initConnectionSqls" as the name of this property for JNDI object factory configuration. Until 1.3.1/1.4.1 are released, "initConnectionSqls" must be used as the name for this property when using BasicDataSoureFactory to create BasicDataSource instances via JNDI.	null	A Collection of SQL statements that will be used to initialize physical connections when they are first created. These statements are executed only once - when the configured connection factory creates the connection.

---

Parameter	Default	Description
poolPreparedStatements	false	Enable prepared statement pooling for this pool.
maxOpenPreparedStatements	unlimited	The maximum number of open statements that can be allocated from the statement pool at the same time, or zero for no limit.

 This component has also the ability to pool PreparedStatements. When enabled a statement pool will be created for each Connection and PreparedStatements created by one of the following methods will be pooled:

• public PreparedStatement prepareStatement(String sql)
• public PreparedStatement prepareStatement(String sql, int resultSetType, int resultSetConcurrency)

 

NOTE - Make sure your connection has some resources left for the other statements. Pooling PreparedStatements may keep their cursors open in the database, causing a connection to run out of cursors, especially if maxOpenPreparedStatements is left at the default (unlimited) and an application opens a large number of different PreparedStatements per connection. To avoid this problem, maxOpenPreparedStatements should be set to a value less than the maximum number of cursors that can be open on a Connection.

---

Parameter	Default	Description
accessToUnderlyingConnectionAllowed	false	Controls if the PoolGuard allows access to the underlying connection.

When allowed you can access the underlying connection using the following construct:

    Connection conn = ds.getConnection();
    Connection dconn = ((DelegatingConnection) conn).getInnermostDelegate();
    ...
    conn.close()

 Default is false, it is a potential dangerous operation and misbehaving programs can do harmfull things. (closing the underlying or continue using it when the guarded connection is already closed) Be carefull and only use when you need direct access to driver specific extentions.

NOTE: Do not close the underlying connection, only the original one.

---

Parameter	Default	Description
removeAbandoned	false	Flag to remove abandoned connections if they exceed the removeAbandonedTimout. If set to true a connection is considered abandoned and eligible for removal if it has been idle longer than the removeAbandonedTimeout. Setting this to true can recover db connections from poorly written applications which fail to close a connection.
removeAbandonedTimeout	300	Timeout in seconds before an abandoned connection can be removed.
logAbandoned	false	Flag to log stack traces for application code which abandoned a Statement or Connection. Logging of abandoned Statements and Connections adds overhead for every Connection open or new Statement because a stack trace has to be generated.

 If you have enabled "removeAbandoned" then it is possible that a connection is reclaimed by the pool because it is considered to be abandoned. This mechanism is triggered when (getNumIdle() < 2) and (getNumActive() > getMaxActive() - 3)

 For example maxActive=20 and 18 active connections and 1 idle connection would trigger the "removeAbandoned". But only the active connections that aren't used for more then "removeAbandonedTimeout" seconds are removed, default (300 sec). Traversing a resultset doesn't count as being used.