MMM结合Semisync机制实现Mysql Master-Master高可用

最新推荐文章于 2023-12-11 17:52:03 发布

ykingor

最新推荐文章于 2023-12-11 17:52:03 发布

阅读量367

点赞数

分类专栏：关系型数据库（mysql）

关系型数据库（mysql）专栏收录该内容

19 篇文章 0 订阅

订阅专栏

架构：

两个Master(主备模式)，一个或多个Slave(也可以没有Slave，只有主备Master)：

1、Monitor运行MMM Daemon程序，实现所有Mysql服务器的监控和故障切换工作；

2、Master1和Master2互为主备，同时只有一个主可用于写操作(也可同时分担读操作)，另一个作为备用，可以分担读操作，读写分离需要应用程序实现；

3、Slave机器与当前active Master同步，如当前active Master故障后，Master将切换到passive Master，同时MMM修改Slave与新的Master同步；

4、Application通过write和read ip进行读写操作；

环境：

主机名	服务器IP地址	Write IP	Read IP	备注
mysql01	10.0.60.100	10.0.60.160	10.0.60.161	默认为active Master，运行mmm agent
mysql02	10.0.60.101		10.0.60.162	默认为passive Master，运行mmm agent
mysql03	10.0.60.102		10.0.60.163	Slave，由MMM维护，运行mmm agent
mysql04	10.0.60.103			监控机，运行MMM Daemon程序

软件信息：

Mysql：5.6.17-log MySQL Community Server (GPL)

MMM：mysql-mmm-2.2.1

OS：CentOS release 6.4 (Final)，kernel 2.6.32-358.el6.x86_64

一、配置复制环境

这里是全新配置，如果是已经存在了单master和slave环境，将配置不一样，可以结合xtrabackup工具实现数据的备份和恢复，配置主备master环境。

前提要求：

1、所有mysql实例开启read_only=1；

2、主备master需要开启log_bin；

3、所有mysql实例配置不同的server_id以及不同的二进制日志、relay日志文件名；

参考配置参数：

mysql01的特殊配置参数：

mysql01>\! grep -E "log_bin|server_id|read_only" my.cnf log_bin = mysql01-bin server_id = 1 read_only mysql01>

mysql02的特殊配置参数：

mysql02>\! grep -E "log_bin|server_id|read_only" my.cnf log_bin = mysql02-bin server_id = 2 read_only mysql02>

mysql03的特殊配置参数：

mysql03>\! grep -E "log_bin|server_id|read_only" my.cnf log_bin = mysql_bin server_id = 3 read_only

配置主从：

1、配置mysql01和mysql02互为主从：

在mysql01和mysql02上创建同样的复制账号：

grant replication slave on *.* to 'repl'@'10.0.60.%' identified by 'repl';

查看master状态：

show master status;

在每个节点执行CHANGE MASTER TO语句：

mysql01> change master to master_host = '10.0.60.101', master_user='repl', master_password='repl', master_log_file='mysql02-bin.000001', master_log_pos=545;

mysql02> change master to master_host = '10.0.60.100', master_user='repl', master_password='repl', master_log_file='mysql01-bin.000001', master_log_pos=545;

在两个节点开启slave：

start slave;

查看slave状态是否正常：

mysql02>show slave status\G; Slave_IO_Running: Yes Slave_SQL_Running: Yes

2、配置mysql03为mysql01的从服务器

mysql03> change master to master_host = '10.0.60.100', master_user='repl', master_password='repl', master_log_file='mysql01-bin.000001', master_log_pos=545;

验证slave状态正常后，开始下面的步骤。

二、配置半同步

使用半同步机制，可以确保至少一台slave收到master的二进制日志，在一定程度上保证了数据的一致性，减少了当master当机时，造成数据丢失。

半同步机制由google贡献，从mysql 5.5开始原生支持该特性。

前提要求：

1、主备master都要安装并开启semisync master和slave，因mmm不能进行semisync配置和管理；

2、slave需要安装并开启semisync slave；

配置步骤：

1、mysql01和mysql02安装semisync master和slave插件：

mysql01>INSTALL PLUGIN rpl_semi_sync_master SONAME 'semisync_master.so'; Query OK, 0 rows affected (0.01 sec) mysql01>INSTALL PLUGIN rpl_semi_sync_slave SONAME 'semisync_slave.so'; Query OK, 0 rows affected (0.00 sec)

mysql02>INSTALL PLUGIN rpl_semi_sync_master SONAME 'semisync_master.so'; Query OK, 0 rows affected (0.05 sec) mysql02>INSTALL PLUGIN rpl_semi_sync_slave SONAME 'semisync_slave.so'; Query OK, 0 rows affected (0.01 sec)

2、mysql01和mysql02开启semisync master和slave：

mysql01>SET GLOBAL rpl_semi_sync_master_enabled = 1; Query OK, 0 rows affected (0.00 sec) mysql01>SET GLOBAL rpl_semi_sync_slave_enabled = 1; Query OK, 0 rows affected (0.00 sec)

mysql02>SET GLOBAL rpl_semi_sync_master_enabled = 1; Query OK, 0 rows affected (0.00 sec) mysql02>SET GLOBAL rpl_semi_sync_slave_enabled = 1; Query OK, 0 rows affected (0.00 sec)

同时将参数写入到配置文件，以mysql实例开启时自动开启半同步：

mysql02>\! cat my.cnf|grep semi rpl_semi_sync_master_enabled = 1 rpl_semi_sync_slave_enabled = 1

3、mysql03安装并开启semisync slave插件：

mysql03>INSTALL PLUGIN rpl_semi_sync_slave SONAME 'semisync_slave.so'; Query OK, 0 rows affected (0.01 sec) mysql03>SET GLOBAL rpl_semi_sync_slave_enabled = 1; Query OK, 0 rows affected (0.00 sec)

同时将参数写入到配置文件，以mysql实例开启时自动开启半同步：

mysql03>\! cat my.cnf|grep semi rpl_semi_sync_slave_enabled = 1 mysql03>

4、所有mysql实例停止slave并开启slave，使半同步机制生效：

stop slave;start slave;

5、查看semisync状态

mysql01>show status like '%emi%'; +--------------------------------------------+-------+ | Variable_name | Value | +--------------------------------------------+-------+ | Rpl_semi_sync_master_clients | 2 | | Rpl_semi_sync_master_net_avg_wait_time | 0 | | Rpl_semi_sync_master_net_wait_time | 0 | | Rpl_semi_sync_master_net_waits | 0 | | Rpl_semi_sync_master_no_times | 0 | | Rpl_semi_sync_master_no_tx | 0 | | Rpl_semi_sync_master_status | ON | | Rpl_semi_sync_master_timefunc_failures | 0 | | Rpl_semi_sync_master_tx_avg_wait_time | 0 | | Rpl_semi_sync_master_tx_wait_time | 0 | | Rpl_semi_sync_master_tx_waits | 0 | | Rpl_semi_sync_master_wait_pos_backtraverse | 0 | | Rpl_semi_sync_master_wait_sessions | 0 | | Rpl_semi_sync_master_yes_tx | 0 | | Rpl_semi_sync_slave_status | ON | +--------------------------------------------+-------+ 15 rows in set (0.00 sec)

三、配置MMM

Multi Master Replication Manager for Mysql(MMM)是一套开源的perl脚本，对Mysql Master-Master复制环境(在任何时刻只有一个节点可写)进行监控、故障恢复以及管理。同时能根据复制的延时情况管理读负载均衡，通过迁移read虚拟IP地址。同时也能用于数据备份，以及节点之间重同步。

主要由三个脚本组成：

1、mmm_mod：监控daemon程序，进行监控工作，并决定读、写角色的迁移；最好运行在专用的监控服务器上，可以管理多套Master-Slave集群。

2、mmm_agentd：客户端daemon程序，运行在所有mysql实例服务器，与监控节点进行简单的远程通信。

3、mmm_control：用于管理mmm_mond进程的命令行脚本。

前提需求：

1、支持环境：

两个节点的Master-Master环境，MMM需要5个IP地址(每个节点一个固定IP地址，一个write IP地址，两个read IP地址，write和read IP依据节点的可用性进行自动的迁移)，正常情况下，active master有一个write IP和一个read IP地址，standby master有一个read IP地址，如果当前active master故障，write和read IP地址将迁移到standby master；

两个节点的Master-Master，以及一个或多个slave的环境，同时也是大多数企业使用的方案(可以更好的扩展读，同时有冗余的Slave可用于备份等工作，防止阻塞正常的事务)。

2、n+1个主机：n个运行mysql实例的服务器，一个机器用于运行MMM监控daemon程序；

3、2*(n+1) IP地址：每个主机一个固定IP地址，同时每台mysql实例一个read IP地址以及一个write IP地址；

4、monitor数据库用户：需要REPLICATION CLIENT权限，用于MMM监控(mmm_mond)；

5、agent数据库用户：需要SUPER、REPLICATION CLIENT、PROCESS权限，用于MMM 客户端(mmm_agentd)，可以只针对本机IP进行授权；

6、relication数据库用户：需要REPLICATION SLAVE权限，用于mysql复制；

7、tools数据库用户：需要SUPER、REPLICATION CLIENT、RELOAD权限，用于MMM tools(如mmm_backup、mmm_clone、mmm_restore)

1、在mysql实例服务器安装依赖包和mmm

安装依赖包：

yum -y install perl iproute perl-Algorithm-Diff perl-DBI perl-Class-Singleton perl-DBD-MySQL perl-Log-Log4perl perl-Log-Dispatch perl-Proc-Daemon perl-MailTools perl-Time-HiRes perl-Mail-Sendmail perl-Mail-Sender perl-Email-Date-Format perl-MIME-Lite perl-Net-ARP

如果在标准软件仓库和EPEL软件仓库没有，需要单独下载，可以去以下网址下载：

http://rpm.pbone.net

http://search.cpan.org/

http://www.rpmfind.net/

安装mmm：

tar xvf mysql-mmm-2.2.1.tar.gz cd mysql-mmm-2.2.1 make install

2、在mysql实例服务器配置mmm agent

mmm_agentd使用mmm_agent.conf配置文件：

# cat /etc/mysql-mmm/mmm_agent.conf include mmm_common.conf #包含这个公用配置文件 #Description: name of this host，可以不是主机名，每台mysql实例的host不同(如mysql01设置为db1，mysql02设置为db2，mysql03设置为db3) this db1 #Description: Enable debug mode，设置1，打印日志到前台，按ctrl+c将结束进程 debug 0 #Description: Maximum number of retries when killing threads to prevent further #writes during the removal of the active_master_role. max_kill_retries 10

公用配置文件：mmm_common.conf，每个实例一样，并要拷贝到监控服务器供mmm_mond使用，进行网卡接口的定义，每个主机的描述，复制和mmm agent的用户名和密码配置，以及读写规则等

# cat /etc/mysql-mmm/mmm_common.conf #Description: name of the role for which identifies the active master，定义活动master为可写 active_master_role writer <host default> #默认段 #Description: network interface on which the IPs of the roles should be configured，用于绑定ip的网络接口 cluster_interface eth0 pid_path /var/run/mmm_agentd.pid bin_path /usr/lib/mysql-mmm/ #Description: Port on which mmm agentd listens agent_port 9989 #Description: Port on which mysqld is listening mysql_port 3306 #Description: mysql user used for replication replication_user repl #Description: mysql password used for replication replication_password repl #Description: mysql user for MMM Agent agent_user mmm_agent #Description: mysql password for MMM Agent agent_password mmm_agent </host> <host db1> #命名段，指定每个mysql实例主机 #Description: IP of host ip 10.0.60.100 #Description: Mode of host. Either master or slave. mode master #Description: Name of peer host (if mode is master) peer db2 </host> <host db2> ip 10.0.60.101 mode master peer db1 </host> <host db3> ip 10.0.60.102 mode slave </host> <role writer> #定义write角色 #Description: Hosts which may take over the role hosts db1, db2 #Description: One or multiple IPs associated with the role，指定浮动write IP地址 ips 10.0.60.160 #Description: Mode of role. Either balanced or exclusive mode exclusive #Description: The preferred host for this role. Only allowed for exclusive roles. #prefer - </role> <role reader> #定义read角色 hosts db1, db2, db3 ips 10.0.60.161,10.0.60.162,10.0.60.163 #浮动read IP地址 mode balanced </role>

3、启动mmm agent服务

/etc/init.d/mysql-mmm-agent start chkconfig --level 2345 mysql-mmm-agent on

4、在监控服务器(mysql04)安装依赖包和mmm

安装依赖包：

安装mmm：

tar xvf mysql-mmm-2.2.1.tar.gz cd mysql-mmm-2.2.1 make install

5、配置mmm 监控配置文件

mmm_mond和mmm_control使用mmm_mon.conf或mmm_mon_CLUSTER.conf配置文件

mmm_mon.conf配置文件参考：

# cat /etc/mysql-mmm/mmm_mon.conf include mmm_common.conf #The monitor section is required by mmm_mond and mmm_control <monitor> #Description: IP on which mmm_mond listens ip 127.0.0.1 #Description: Port on which mmm mond listens port 9988 #Description: Location of pid-file pid_path /var/run/mmm_mond.pid #Description: Path to directory containing MMM binaries bin_path /usr/lib/mysql-mmm/ #Description: Location of of status file status_path /var/lib/misc/mmm_mond.status #Description: Break between network checks ping_interval 1 #Description: IPs used for network checks，指定所有mysql服务器IP，write和read IP地址，用于进行ping检查 ping_ips 10.0.60.100, 10.0.60.101, 10.0.60.102, 10.0.60.160, 10.0.60.161, 10.0.60.162, 10.0.60.163 #Description: Duration in seconds for flap detection. See flap_count flap_duration 3600 #Description: Maximum number of downtimes within flap_duration seconds after #which a host is considered to be flapping. flap_count 3 #Description: How many seconds to wait before switching node status from #AWAITING_RECOVERY to ONLINE. 0 = disabled. auto_set_online 0 #Description: Binary used to kill hosts if roles couldn’t be removed because the agent #was not reachable. You have to provide a custom binary for this which #takes the hostname as first argument and the state of check ping (1 -ok; 0 - not ok) as second argument. kill_host_bin /usr/lib/mysql-mmm/monitor/kill_host #Description: Startup carefully i.e. switch into passive mode when writer role is #configured on multiple hosts careful_startup 0 #Description: Default mode of monitor. mode active #Description: How many seconds to wait for other master to become ONLINE before #switching from mode WAIT to mode ACTIVE. 0 = infinite. wait_for_other_master 120 </monitor> <host default> #Description: mysql user for MMM Monitor monitor_user mmm_agent #Description: mysql password for MMM Monitor monitor_password mmm_agent </host> <check mysql> #check段，mmm执行ping、mysql、rep_threads、rep_backlog四种检查，可以分别进行检查间隔等参数配置。 #Description: Perform check every 5 seconds check_period 5 #Description: Check is considered as failed if it doesn’t succeed for at least #trap period seconds. trap_period 10 #Description: Check times out after timeout seconds timeout 2 #Description: Restart checker process after restart after checks restart_after 10000 #Description: Maximum backlog for check rep_backlog. max_backlog 60 </check> #设置为1,开启调试模式，打印日志到前台，ctrl+c将结束进程，对于调试有帮助 debug 0

6、开启mmm monitor监控

/etc/init.d/mysql-mmm-monitor start chkconfig --level 2345 mysql-mmm-monitor on

7、使用mmm_control查看状态

# mmm_control show db1(10.0.60.100) master/ONLINE. Roles: reader(10.0.60.163), writer(10.0.60.160) db2(10.0.60.101) master/ONLINE. Roles: reader(10.0.60.161) db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.162)

注：

当节点第一次开启，状态为等待恢复。

设置节点online：

# mmm_control set_online db1

MMM如何工作：

当故障发生时，mmm迅速的迁移故障节点的IP地址从一个节点到另一个节点，并使用Net::ARP Perl模块更新ARP表。

处理过程：

在故障active master节点：

1、mysql 设置为read_only(set global read_only=1)，防止写事务；

2、中断活动连接；

3、移除写ip；

在新master节点：

1、运行在passive master的mmm进程被通知即将成为active write；

2、slave将尝试从master的二进制日志抓取任何剩余事务；

3、关闭read_only(set global read_only=0)；

4、绑定write ip，并发生arp通告；

四、测试

1、测试mysql01 mysql实例故障

手动关闭mysql01服务器上的mysql实例，期望master将迁移到mysql02

停止mysql01的mysqld进程：也可以使用"killall -15 mysqld"结束mysqld进程

mysql01>\! sh stop.sh

查看mmm_mond的日志：总共经过10s时间完成迁移

# tail -f /var/log/mysql-mmm/mmm_mond.log 2014/05/27 14:19:13 WARN Check 'rep_backlog' on 'db1' is in unknown state! Message: UNKNOWN: Connect error (host = 10.0.60.100:3306, user = mmm_agent)! Lost connection to MySQL server at 'reading initial communication packet', system error: 111 2014/05/27 14:19:13 WARN Check 'rep_threads' on 'db1' is in unknown state! Message: UNKNOWN: Connect error (host = 10.0.60.100:3306, user = mmm_agent)! Lost connection to MySQL server at 'reading initial communication packet', system error: 111 2014/05/27 14:19:22 ERROR Check 'mysql' on 'db1' has failed for 10 seconds! Message: ERROR: Connect error (host = 10.0.60.100:3306, user = mmm_agent)! Lost connection to MySQL server at 'reading initial communication packet', system error: 111 2014/05/27 14:19:23 FATAL State of host 'db1' changed from ONLINE to HARD_OFFLINE (ping: OK, mysql: not OK) 2014/05/27 14:19:23 INFO Removing all roles from host 'db1': 2014/05/27 14:19:23 INFO Removed role 'reader(10.0.60.163)' from host 'db1' 2014/05/27 14:19:23 INFO Removed role 'writer(10.0.60.160)' from host 'db1' 2014/05/27 14:19:23 INFO Orphaned role 'writer(10.0.60.160)' has been assigned to 'db2' #可以看到写IP已经迁移到mysql02 2014/05/27 14:19:23 INFO Orphaned role 'reader(10.0.60.163)' has been assigned to 'db3'

使用mmm_control命令查看状态：

[root@mysql04 ~]# mmm_control show db1(10.0.60.100) master/HARD_OFFLINE. Roles: #mysql01状态已经变为HARD_OFFLINE，意外着ping错误或mysql故障 db2(10.0.60.101) master/ONLINE. Roles: reader(10.0.60.161), writer(10.0.60.160) db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.162), reader(10.0.60.163)

检查mysql02的read_only变量是否改变：

检查mysql03是否已经将mysql02作为主：

mysql03>show slave status\G; *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 10.0.60.101 #已经从Mysql02同步 Master_User: repl Master_Port: 3306 Connect_Retry: 10 Master_Log_File: mysql02-bin.000014 Read_Master_Log_Pos: 120 Relay_Log_File: mysql03-relay-bin.000002 Relay_Log_Pos: 285 Relay_Master_Log_File: mysql02-bin.000014 Slave_IO_Running: Yes Slave_SQL_Running: Yes

当再次启动mysql01的mysql实例，db1的状态将由HARD_OFFLINE改变为AWAITING_RECOVERY：

[root@mysql04 ~]# mmm_control show db1(10.0.60.100) master/AWAITING_RECOVERY. Roles: db2(10.0.60.101) master/ONLINE. Roles: reader(10.0.60.161), writer(10.0.60.160) db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.162), reader(10.0.60.163)

需要手动设置为online，mmm才会分配read ip给mysql01，并与mysql02同步：

[root@mysql04 ~]# mmm_control set_online db1 OK: State of 'db1' changed to ONLINE. Now you can wait some time and check its new roles!

mysql01>show slave status\G; *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 10.0.60.101 #mysql01已经从Mysql02同步 Master_User: repl Master_Port: 3306 Connect_Retry: 10 Master_Log_File: mysql02-bin.000015 Read_Master_Log_Pos: 120 Relay_Log_File: mysql01-relay.000027 Relay_Log_Pos: 285 Relay_Master_Log_File: mysql02-bin.000015 Slave_IO_Running: Yes Slave_SQL_Running: Yes

查看mysql02的semisync状态：

mysql02>show status like 'Rpl_semi%'; +--------------------------------------------+-------+ | Variable_name | Value | +--------------------------------------------+-------+ | Rpl_semi_sync_master_clients | 2 | | Rpl_semi_sync_master_net_avg_wait_time | 1053 | | Rpl_semi_sync_master_net_wait_time | 2106 | | Rpl_semi_sync_master_net_waits | 2 | | Rpl_semi_sync_master_no_times | 0 | | Rpl_semi_sync_master_no_tx | 0 | | Rpl_semi_sync_master_status | ON | | Rpl_semi_sync_master_timefunc_failures | 0 | | Rpl_semi_sync_master_tx_avg_wait_time | 1015 | | Rpl_semi_sync_master_tx_wait_time | 1015 | | Rpl_semi_sync_master_tx_waits | 1 | | Rpl_semi_sync_master_wait_pos_backtraverse | 0 | | Rpl_semi_sync_master_wait_sessions | 0 | | Rpl_semi_sync_master_yes_tx | 1 | | Rpl_semi_sync_slave_status | ON | +--------------------------------------------+-------+ 15 rows in set (0.00 sec)

2、模拟mysql02(Active Master服务器) kernel panic，期望进行迁移

执行上面的测试后，当前active master为mysql02，使用下面命令模拟kernel panic：

mysql02>\! echo "c" > /proc/sysrq-trigger

查看mmm_mond日志：总共经过了20s的时间完成迁移

# tail -f /var/log/mysql-mmm/mmm_mond.log 2014/05/27 14:44:42 WARN Check 'rep_threads' on 'db2' is in unknown state! Message: UNKNOWN: Connect error (host = 10.0.60.101:3306, user = mmm_agent)! Can't connect to MySQL server on '10.0.60.101' (4) 2014/05/27 14:44:42 WARN Check 'rep_backlog' on 'db2' is in unknown state! Message: UNKNOWN: Connect error (host = 10.0.60.101:3306, user = mmm_agent)! Can't connect to MySQL server on '10.0.60.101' (4) 2014/05/27 14:44:46 FATAL Can't reach agent on host 'db2' 2014/05/27 14:44:49 ERROR Check 'ping' on 'db2' has failed for 11 seconds! Message: ERROR: Could not ping 10.0.60.101 #ping检查错误 2014/05/27 14:44:55 ERROR Check 'mysql' on 'db2' has failed for 14 seconds! Message: ERROR: Connect error (host = 10.0.60.101:3306, user = mmm_agent)! Can't connect to MySQL server on '10.0.60.101' (4) #mysql检查错误，不能连接 2014/05/27 14:44:59 INFO Check 'ping' on 'db2' is ok! 2014/05/27 14:45:02 FATAL State of host 'db2' changed from ONLINE to HARD_OFFLINE (ping: OK, mysql: not OK) #改变mysql02的状态为HARD_OFFLINE 2014/05/27 14:45:02 INFO Removing all roles from host 'db2': #移除mysql02的角色 2014/05/27 14:45:02 INFO Removed role 'reader(10.0.60.161)' from host 'db2' 2014/05/27 14:45:02 INFO Removed role 'writer(10.0.60.160)' from host 'db2' 2014/05/27 14:45:02 FATAL Agent on host 'db2' is reachable again 2014/05/27 14:45:02 INFO Orphaned role 'writer(10.0.60.160)' has been assigned to 'db1' #分配角色到其他机器,write IP分配到mysql01，永远不会分配到mysql03 2014/05/27 14:45:02 INFO Orphaned role 'reader(10.0.60.161)' has been assigned to 'db3'

使用mmm_control查看状态：

[root@mysql04 ~]# mmm_control show db1(10.0.60.100) master/ONLINE. Roles: reader(10.0.60.163) db2(10.0.60.101) master/HARD_OFFLINE. Roles: db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.162)

3、模拟active master服务器网络不通，期望进行迁移，但是网络恢复后，将不会重启slave；

当前active master为mysql01，在mysql01上禁用网卡：

mysql01>\! cat down_net.sh ifdown eth0 sleep 600 ifup eth0 mysql01>\! sh down_net.sh

查看mmm_mond日志：总共经过了9s完成迁移

2014/05/27 15:02:35 WARN Check 'rep_threads' on 'db1' is in unknown state! Message: UNKNOWN: Connect error (host = 10.0.60.100:3306, user = mmm_agent)! Can't connect to MySQL server on '10.0.60.100' (4) 2014/05/27 15:02:35 WARN Check 'rep_backlog' on 'db1' is in unknown state! Message: UNKNOWN: Connect error (host = 10.0.60.100:3306, user = mmm_agent)! Can't connect to MySQL server on '10.0.60.100' (4) 2014/05/27 15:02:41 FATAL Can't reach agent on host 'db1' 2014/05/27 15:02:41 ERROR Check 'ping' on 'db1' has failed for 11 seconds! Message: ERROR: Could not ping 10.0.60.100 #ping检查错误 2014/05/27 15:02:44 FATAL State of host 'db1' changed from ONLINE to HARD_OFFLINE (ping: not OK, mysql: OK) #改变状态 2014/05/27 15:02:44 INFO Removing all roles from host 'db1': #移除角色 2014/05/27 15:02:44 INFO Removed role 'reader(10.0.60.163)' from host 'db1' 2014/05/27 15:02:44 INFO Removed role 'writer(10.0.60.160)' from host 'db1' 2014/05/27 15:02:44 ERROR Can't send offline status notification to 'db1' - killing it! 2014/05/27 15:02:44 FATAL Could not kill host 'db1' - there may be some duplicate ips now! (There's no binary configured for killing hosts.) 2014/05/27 15:02:44 INFO Orphaned role 'writer(10.0.60.160)' has been assigned to 'db2' 2014/05/27 15:02:44 INFO Orphaned role 'reader(10.0.60.163)' has been assigned to 'db3' 2014/05/27 15:02:48 ERROR Check 'mysql' on 'db1' has failed for 14 seconds! Message: ERROR: Connect error (host = 10.0.60.100:3306, user = mmm_agent)! Can't connect to MySQL server on '10.0.60.100' (4)

使用mmm_control查看状态：

[root@mysql04 ~]# mmm_control show # Warning: agent on host db1 is not reachable db1(10.0.60.100) master/HARD_OFFLINE. Roles: db2(10.0.60.101) master/ONLINE. Roles: reader(10.0.60.161), writer(10.0.60.160) db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.162), reader(10.0.60.163)

当网络恢复后，mmm会修改mysql01的slave配置，修改主为mysql02，但是没有重启slave，造成不能进行数据同步，需要手工重新开启slave。

使用mmm_control检查状态：

[root@mysql04 ~]# mmm_control show db1(10.0.60.100) master/AWAITING_RECOVERY. Roles: db2(10.0.60.101) master/ONLINE. Roles: reader(10.0.60.161), writer(10.0.60.160) db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.162), reader(10.0.60.163) [root@mysql04 ~]# mmm_control set_online db1 #网络恢复后，手动设置为online OK: State of 'db1' changed to ONLINE. Now you can wait some time and check its new roles! [root@mysql04 ~]# mmm_control show db1(10.0.60.100) master/ONLINE. Roles: reader(10.0.60.163) db2(10.0.60.101) master/ONLINE. Roles: reader(10.0.60.161), writer(10.0.60.160) db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.162)

检查mysql01的slave状态：看上去正常的

mysql01>show slave status\G; *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 10.0.60.101 Master_User: repl Master_Port: 3306 Connect_Retry: 10 Master_Log_File: mysql02-bin.000015 Read_Master_Log_Pos: 328 Relay_Log_File: mysql01-relay.000027 Relay_Log_Pos: 493 Relay_Master_Log_File: mysql02-bin.000015 Slave_IO_Running: Yes Slave_SQL_Running: Yes

但是在mysql02(当前active master)插入数据，mysql01不能从mysql02同步：

mysql02> insert into t1 values(2); Query OK, 1 row affected (0.02 sec) mysql02>select * from t1; +----+ | id | +----+ | 1 | | 2 | +----+ 2 rows in set (0.00 sec)

mysql03已经同步了数据：

mysql03>select * from t1; +----+ | id | +----+ | 1 | | 2 | +----+ 2 rows in set (0.00 sec)

而mysql01没有同步数据：

mysql01>select * from t1; +----+ | id | +----+ | 1 | +----+ 1 row in set (0.00 sec)

解决方法：先停止slave，然后启动slave；

mysql01>stop slave;start slave; Query OK, 0 rows affected (0.00 sec) Query OK, 0 rows affected (0.00 sec) mysql01>select * from t1; +----+ | id | +----+ | 1 | | 2 | +----+ 2 rows in set (0.00 sec)

截图：

4、模拟slave线程故障，不管是io或sql线程故障，期望进行迁移，恢复时如果在flap_duration时间内超过了flap_count次数的故障，将不会自动恢复，状态由REPLICATION_FAIL改为 AWAITING_RECOVERY (because it's flapping)

当前active master为mysql02。

停止active master(mysql02)的slave，不会造成迁移：

mmm_mond的日志：已经检测到db2(mysql02)复制线程错误

2014/05/27 15:39:02 ERROR Check 'rep_threads' on 'db2' has failed for 10 seconds! Message: ERROR: Replication is broken

使用mmm_control查看状态：

[root@mysql04 ~]# mmm_control show db1(10.0.60.100) master/ONLINE. Roles: reader(10.0.60.161) db2(10.0.60.101) master/ONLINE. Roles: reader(10.0.60.162), writer(10.0.60.160) db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.163)

如果当其他slave(mysql01、mysql03)的线程(不管是io还是sql线程)故障将会发生迁移：

手工停止io线程：

mysql01>stop slave io_thread; Query OK, 0 rows affected (0.01 sec)

查看mmm_mond日志：

2014/05/27 15:43:28 ERROR Check 'rep_threads' on 'db1' has failed for 10 seconds! Message: ERROR: Replication is broken 2014/05/27 15:43:31 FATAL State of host 'db1' changed from ONLINE to REPLICATION_FAIL 2014/05/27 15:43:31 INFO Removing all roles from host 'db1': 2014/05/27 15:43:31 INFO Removed role 'reader(10.0.60.161)' from host 'db1' #移除角色 2014/05/27 15:43:31 INFO Orphaned role 'reader(10.0.60.161)' has been assigned to 'db3'

使用mmm_control查看状态：

[root@mysql04 ~]# mmm_control show db1(10.0.60.100) master/REPLICATION_FAIL. Roles: db2(10.0.60.101) master/ONLINE. Roles: reader(10.0.60.162), writer(10.0.60.160) db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.161), reader(10.0.60.163)

当重新开启io线程后，mmm将自动恢复db1，并重新迁移read IP到db1(mysql01)上，如果故障超过：

重新开启线程：

mysql01>start slave io_thread; Query OK, 0 rows affected (0.00 sec)

查看mmm_mond日志：

2014/05/27 15:45:23 INFO Check 'rep_threads' on 'db1' is ok! 2014/05/27 15:45:25 FATAL State of host 'db1' changed from REPLICATION_FAIL to ONLINE 2014/05/27 15:45:25 INFO Moving role 'reader(10.0.60.163)' from host 'db3' to host 'db1'

使用mmm_control查看状态：

[root@mysql04 ~]# mmm_control show db1(10.0.60.100) master/ONLINE. Roles: reader(10.0.60.163) db2(10.0.60.101) master/ONLINE. Roles: reader(10.0.60.162), writer(10.0.60.160) db3(10.0.60.102) slave/ONLINE. Roles: reader(10.0.60.161)