ncl笔记

重装系统后，运行ncl，输出到 x11 报错：

================================================

 GKS ERROR NUMBER -208 ISSUED FROM SUBROUTINE GOPWK :
 --X driver error: DISPLAY environment variable not set
 GKS ERROR NUMBER   25 ISSUED FROM SUBROUTINE GESC  :
 --SPECIFIED WORKSTATION IS NOT OPEN
fatal:Workstation with PID#8 is not open
fatal:Unable to open Workstation-Can't Create
fatal:Unable to access object with id:-4
fatal:_NhlCreate:Invalid Parent id #-4
fatal:PID #-4 can't be found in NhlSetValues
fatal:_NhlCreate:Invalid Parent id #-4
fatal:PID #-4 can't be found in NhlSetValues
fatal:NhlGetValues:PID #-4 is invalid
fatal:["Execute.c":8578]:Execute: Error occurred at or near line 6575 in file /home/ymy/ncl/lib/ncarg/nclscripts/csm/gsn_csm.ncl


fatal:["Execute.c":8578]:Execute: Error occurred at or near line 7399 in file /home/ymy/ncl/lib/ncarg/nclscripts/csm/gsn_csm.ncl


fatal:["Execute.c":8578]:Execute: Error occurred at or near line 10601 in file /home/ymy/ncl/lib/ncarg/nclscripts/csm/gsn_csm.ncl

================================================

出png图正常，x11报错

【原因】

Xshell中X11没有转移到Xmanager

【修改】

参考如何在xshell中激活X11转发功能

xshell界面，文件——属性，

链接--SSH--隧道

x11转移

勾选  转发x11连接到(X):  Xmanager

点击确定即可