usb camera kernel config

Eclipse project for android to use USB Webcam.

To run this application, the following conditions should be satisfied.

1) The kernel is V4L2 enabled, e.g.,

CONFIG_VIDEO_DEV=y

CONFIG_VIDEO_V4L2_COMMON=y

CONFIG_VIDEO_MEDIA=y

CONFIG_USB_VIDEO_CLASS=y

CONFIG_V4L_USB_DRIVERS=y

CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y

2) The permission of /dev/video0 is set 0666 in /ueventd.xxxx.rc

3) USB WebCam is UVC camera, and it supports 640x480 resolution with YUYV format.

Supported platform : Iconia Tab A500.

This application will also work on V4L2-enabled pandaboard and beagleboard.

Finally, I wrote some applications that access /dev/video0,1 through JNI.