当然在网上可以免费下载得到,我用的是桌面版,而不是网站上提供的服务器版,很多刚由Windows转过来的朋友可能会认为服务器版总会比桌面版多些功能,为此而下载了服务版来用。其实Ubuntu网上提供的下载却不然,服务器版只不过比桌面版多了amp的软件(a-apache, m-mysql, p-php),但却没有图形用户界面(可以另外再安装,但比较麻烦)。为此,我使用了桌面版的Ubuntu来完成这次的安装。安装的时候虽然有中文可以选择,但我还是选用了英文,这不是我的英文特别好(再好也好不过母语)的缘故,而是因为Ubuntu的汉化未如理想,汉字的支持也不怎么样(特别是在纯 CUI模式下)。所以还是用英文会更好(不必担心,在英文版Ubuntu下一样可以用中文的输入法,同样也可以让Oracle支持中文),要安装 ubuntu,可以参考网上的其它教程。
[编辑] 第二步,安装必需的包
apt-get install gcc make binutils lesstif2 libc6 libc6-dev rpm libmotif3 libaio1 libstdc++6 alien
Note: 在我使用Ubuntu 10.10安装oracle时,会报一个makefile到错误。这是因为新版本到ubuntu默认安装了libstdc++6,而oracle安装程序要使用的是libstdc++5,所以如果遇到这个错误可以执行 sudo apt-get install libstdc++5 然后在安装程序的报错对话框中点retry就可以继续了。
64位:sudo apt-get install gcc libaio1 lesstif2 lesstif2-dev make libc6 libc6-i386 libc6-dev-i386 libstdc++5 lib32stdc++6 lib32z1 ia32-libs
[编辑] 第三步,创建用户
# adduser oracle 正在添加用户"oracle"... 正在添加新组"oracle" (1001)... 正在添加新用户"oracle" (1002) 到组"oracle"... 创建主目录"/home/oracle"... 正在从"/etc/skel"复制文件... 输入新的 UNIX 密码: 重新输入新的 UNIX 密码: passwd:已成功更新密码 Changing the user information for oracle Enter the new value, or press ENTER for the default Full Name []: oracle Room Number []: Work Phone []: Home Phone []: Other []:
adduser 命令系统会自动创建oracle用户的文件
[编辑] 第四步,修改设置
[编辑] A.设置swap区
Oracle10g至少需要500M的内存和400M的交换空间,要查看swap区是否足够大小,用 fdisk -l 命令去查,如果小于400M的空间,那么就要增加swap的大小 重设交换分区可以使用如下操作:
dd if=/dev/zero of=tmp_swap bs=1k count=900000 chmod 600 tmp_swap mkswap tmp_swap swapon tmp_swap
完成安装以后,可以释放这个空间:
swapoff tmp_swap rm tmp_swap
count 值是根据你需要调整的交换分区大小而定。
[编辑] B.修改 sysctl.conf
添加如下的行到/etc/sysctl.conf 中:
kernel.shmmax = 3147483648 kernel.shmmni = 4096 kernel.shmall = 2097152 kernel.sem = 250 32000 100 128 fs.file-max = 65536 net.ipv4.ip_local_port_range = 1024 65000
[编辑] C.修改 limits.conf
添加如下的行到/etc/security/limits.conf中:
* soft nproc 2407 * hard nproc 16384 * soft nofile 1024 * hard nofile 65536
[编辑] D.让修改生效
修改了以上文件后,必须让其生效,或重启系统,或切换到 root 用户下用以下的方式改变内核运行参数: sysctl -p
[编辑] E.产生相应的软连接
创建一个文件如 kk,内容如下:
#!/bin/bash ln -s /usr/bin/awk /bin/awk ln -s /usr/bin/rpm /bin/rpm ln -s /usr/bin/basename /bin/basename mkdir /etc/rc.d ln -s /etc/rc0.d /etc/rc.d/rc0.d ln -s /etc/rc2.d /etc/rc.d/rc2.d ln -s /etc/rc3.d /etc/rc.d/rc3.d ln -s /etc/rc4.d /etc/rc.d/rc4.d ln -s /etc/rc5.d /etc/rc.d/rc5.d ln -s /etc/rc6.d /etc/rc.d/rc6.d ln -s /etc/init.d /etc/rc.d/init.d
创建后,切换到 root 用户去执行一下。
[编辑] F.创建RedHat的版本声明文件
在/etc/redhat-release中添加以下语句,以使安装程序认为正在一个RedHat的系统上安装:
Red Hat Linux release 3.1 (drupal)
[编辑] G.修改环境变量
编辑 /home/oracle/.bashrc,增加以下export 的内容。 (注意,在Ubnutu 7.04中用户的profile文件已改名为~/.profile,有很多安装教程都是用 ~/.bash_profile,在7.04中不行的)
export ORACLE_HOME=/opt/ora10 export ORACLE_OWNER=oracle export ORACLE_SID=ora1 export ORACLE_TERM=xterm export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/Apache/Apache/bin:$PATH
[编辑] 第五步,开始安装
注销原来的用户,改用oracle用户登录。用env查看一下环境变量是否生效。 然后进行/ora_ins_disk中进行安装,执行安装脚本时还需要以root权限创建目录/opt/ora10
sudo mkdir /opt/ora10 sudo chown -R oracle:oracle /opt/ora10 sudo chmod -R 770 /opt/ora10 cd/ora_ins_disk ./runInstaller
在安装过程中,请使用 Advanced Installation,然后一路按默认的设置进行往下设置,到窗单名为 “Specify Database Configuration Options”的时候,要修改以下设置: Database Character Set 中选择 Simplified Chinese ZHS16GBK 在安装的后期,系统提示需要用 root 用户去运行两个脚本文件orainstRoot.sh和root.sh,安装完毕后,Oracle是正常启动着的,你可以试一下连接数据库,同时也可以使用浏览器去设置一下Oracle,(url:http: //localhost:1158/em/)(Oracle 10g与之前的版本都不一样,使用WEB页的企业管理器来代替以前的C/S版JAVA企业管理器)
[编辑] 第六步,设置自启动
创建自启动脚本 创建 oracledb 脚本到/etc/init.d/oracledb,内容如下
#!/bin/bash # # /etc/init.d/oracledb # # Run-level Startup script for the Oracle Instance, Listener, and # Web Interface export ORACLE_HOME=/opt/ora10 export ORACLE_SID=ora1 export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/Apache/Apache/bin:$PATH ORA_OWNR="oracle" # if the executables do not exist -- display error if [ ! -f $ORACLE_HOME/bin/dbstart -o ! -d $ORACLE_HOME ] then echo "[Oracle Error] dbstart command does not exist, quitting..." exit 1 else echo "[Oracle Info] dbstart existance check OK" fi # depending on parameter -- startup, shutdown, restart # of the instance and listener or usage display case "$1" in start) # Oracle listener and instance startup echo "[Oracle Info] Starting oracle" echo "[Oracle Info] su $ORA_OWNR -c ""$ORACLE_HOME/bin/lsnrctl start" su $ORA_OWNR -c "$ORACLE_HOME/bin/lsnrctl start" if [ $? -ne 0 ] then echo "[Oracle Error] listener failed to start" exit 1 else echo "[Oracle Info] listener start OK" fi su $ORA_OWNR -c "$ORACLE_HOME/bin/dbstart $ORACLE_HOME" echo "[Oracel Info] su $ORA_OWNR -c ""$ORACLE_HOME/bin/dbstart $ORACLE_HOME" if [ $? -ne 0 ] then echo "[Oracle Error] dbstart failed to start" exit 1 else echo "[Oracle Info] dbstart OK" fi touch /var/lock/oracle echo "[Oracle Info]su $ORA_OWNR -c ""$ORACLE_HOME/bin/emctl start dbconsole" su $ORA_OWNR -c "$ORACLE_HOME/bin/emctl start dbconsole" if [ $? -ne 0 ] then echo "[Oracle Error] dbconsole failed to start" exit 1 else echo "[Oracle Info] dbconsole start OK" fi echo "[Oracle Info] Starting oracle ended OK" ;; stop) # Oracle listener and instance shutdown echo "[Oracle Info] Shutdown Oracle: " echo "[Oracle Info] su $ORA_OWNR -c ""$ORACLE_HOME/bin/lsnrctl stop" su $ORA_OWNR -c "$ORACLE_HOME/bin/lsnrctl stop" echo "[Oracle Info] su $ORA_OWNR -c ""$ORACLE_HOME/bin/dbshut $ORACLE_HOME" su $ORA_OWNR -c "$ORACLE_HOME/bin/dbshut $ORACLE_HOME" rm -f /var/lock/oracle echo "[Oracle Info]su $ORA_OWNR -c ""$ORACLE_HOME/bin/emctl stop dbconsole" su $ORA_OWNR -c "$ORACLE_HOME/bin/emctl stop dbconsole" echo "[Oracle Info] Shutdown Oracle ended OK" ;; reload|restart) echo "[Oracle Info]: $1 oracle" $0 stop $0 start ;; *) echo "[Oracle Error] Unknown context: $1" echo "[Oracle Info] Usage: `basename $0` start|stop|restart|reload" exit 1 esac exit 0
设置权限,放到启动脚本中去
chmod 755 /etc/init.d/oracledb update-rc.d oracledb defaults 99
还需要编辑一下/etc/oratab,把其中的N改成Y,不然上述脚本中所调用的$ORACLE_HOME/bin/dbstart在执行时不会自动启动相应的数据库实例(这里的数据库实例是ora1)。文件内容如下:
# # This file is used by ORACLE utilities. It is created by root.sh # and updated by the Database Configuration Assistant when creating # a database. # A colon, ':', is used as the field terminator. A new line terminates # the entry. Lines beginning with a pound sign, '#', are comments. # # Entries are of the form: # $ORACLE_SID:$ORACLE_HOME:<N|Y>: # # The first and second fields are the system identifier and home # directory of the database respectively. The third filed indicates # to the dbstart utility that the database should , "Y", or should not, # "N", be brought up at system boot time. # # Multiple entries with the same $ORACLE_SID are not allowed. # # ora1:/opt/ora10:Y
我的 oralce 的安装盘中可能有些问题,所以如果只用上述的脚本是不能启动 listener的,要修改一下: 修改 /opt/ora10/bin/dbstart文件 查找:(本步骤修改后需重新安装?——(不需要重新安装呀Sutra 2010年6月10日 (四) 21:31 (CST)))
# Set this to bring up Oracle Net Listener ORACLE_HOME_LISTNER=/ade/vikrkuma_new/oracle
将其改为:
# Set this to bring up Oracle Net Listener ORACLE_HOME_LISTNER=$ORACLE_HOME
设置后,测试一下
/etc/init.d/./oracledb reload
如果一切正常的话,会关闭一次Oracle又再重新打开。