Linux添加ssh访问端口

为了安全，防止ip端口嗅探，经常采取的策略就是对外封闭端口。

然而，也可以通过更改端口的方式，继续获取连接。这里就介绍一下Linux连接端口的设置

su root 用超级用户权限 打开/etc/ssh/sshd_config

sudo vim /etc/ssh/sshd_config

文件内容如下

#	$OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.


# $OpenBSD: sshd_config,v 1.100 2016/08/15 12:32:04 naddy Exp $ 
 
# This is the sshd server system-wide configuration file.  See 
# sshd_config(5) for more information. 
 
# This sshd was compiled with PATH=/usr/local/bin:/usr/bin 
 
# The strategy used for options in the default sshd_config shipped with 
# OpenSSH is to specify options with their default value where 
# possible, but leave them commented.  Uncommented options override the 
# default value. 
 
# If you want to change the port on a SELinux system, you have to tell 
# SELinux about this change. 
# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER    <==在开启selinux的系统上，修改ssh端口的要修改selinux规则，用此命令修改 
# 
Port 22              <==默认ssh端口，生产环境中建议改成五位数的端口  
Port 22222　　　　　　<==追加的ssh端口，现在两个端口都能用了
#AddressFamily any   <==地址家族，any表示同时监听ipv4和ipv6地址 
#ListenAddress 0.0.0.0  <==监听本机所有ipv4地址 
#ListenAddress ::    <==监听本机所有ipv6地址 
HostKey /etc/ssh/ssh_host_rsa_key   <==ssh所使用的RSA私钥路径 
#HostKey /etc/ssh/ssh_host_dsa_key 
HostKey /etc/ssh/ssh_host_ecdsa_key   <==ssh所使用的ECDSA私钥路径 
HostKey /etc/ssh/ssh_host_ed25519_key   <==ssh所使用的ED25519私钥路径 
 
# Ciphers and keying 
#RekeyLimit default none 
 
# Logging 
#SyslogFacility AUTH 
SyslogFacility AUTHPRIV    <==设定在记录来自sshd的消息的时候，是否给出“facility code” 
#LogLevel INFO    <==日志记录级别，默认为info  
 
# Authentication: 
 
#LoginGraceTime 2m    <==限定用户认证时间为2min 
#PermitRootLogin yes   <==是否允许root账户ssh登录，生产环境中建议改成no，使用普通账户ssh登录 
#StrictModes yes    <==设置ssh在接收登录请求之前是否检查用户根目录和rhosts文件的权限和所有权，建议开启 
#MaxAuthTries 6   <==指定每个连接最大允许的认证次数。默认值是 6 
#MaxSessions 10   <==最大允许保持多少个连接。默认值是 10  
 
#PubkeyAuthentication yes  <==是否开启公钥验证 
 
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2 
# but this is overridden so installations will only check .ssh/authorized_keys 
AuthorizedKeysFile      .ssh/authorized_keys   <==公钥验证文件路径 
 
#AuthorizedPrincipalsFile none 
 
#AuthorizedKeysCommand none 
#AuthorizedKeysCommandUser nobody 
 
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts 
#HostbasedAuthentication no 
# Change to yes if you don't trust ~/.ssh/known_hosts for 
# HostbasedAuthentication   <==指定服务器在使用 ~/.shosts ~/.rhosts /etc/hosts.equiv 进行远程主机名匹配时，是否进行反向域名查询 
#IgnoreUserKnownHosts no  <==是否在 RhostsRSAAuthentication 或 HostbasedAuthentication 过程中忽略用户的 ~/.ssh/known_hosts 文件 
# Don't read the user's ~/.rhosts and ~/.shosts files 
#IgnoreRhosts yes   <==是否在 RhostsRSAAuthentication 或 HostbasedAuthentication 过程中忽略 .rhosts 和 .shosts 文件 
 
# To disable tunneled clear text passwords, change to no here! 
#PasswordAuthentication yes 
#PermitEmptyPasswords no    <==是否允许空密码 
PasswordAuthentication yes   <==是否允许密码验证，生产环境中建议改成no，只用密钥登录 
 
# Change to no to disable s/key passwords 
#ChallengeResponseAuthentication yes 
ChallengeResponseAuthentication no   <==是否允许质疑-应答(challenge-response)认证 
 
# Kerberos options 
#KerberosAuthentication no   <==是否使用Kerberos认证 
#KerberosOrLocalPasswd yes   <==如果 Kerberos 密码认证失败，那么该密码还将要通过其它的认证机制(比如 /etc/passwd) 
#KerberosTicketCleanup yes  <==是否在用户退出登录后自动销毁用户的 ticket 
#KerberosGetAFSToken no  <==如果使用了AFS并且该用户有一个 Kerberos 5 TGT，那么开启该指令后，将会在访问用户的家目录前尝试获取一个AFS token 
#KerberosUseKuserok yes 
 
# GSSAPI options 
GSSAPIAuthentication yes   <==是否允许基于GSSAPI的用户认证 
GSSAPICleanupCredentials no    <==是否在用户退出登录后自动销毁用户凭证缓存 
#GSSAPIStrictAcceptorCheck yes 
#GSSAPIKeyExchange no 
#GSSAPIEnablek5users no 
 
# Set this to 'yes' to enable PAM authentication, account processing, 
# and session processing. If this is enabled, PAM authentication will 
# be allowed through the ChallengeResponseAuthentication and 
# PasswordAuthentication.  Depending on your PAM configuration, 
# PAM authentication via ChallengeResponseAuthentication may bypass 
# the setting of "PermitRootLogin without-password". 
# If you just want the PAM account and session checks to run without 
# PAM authentication, then enable this but set PasswordAuthentication 
# and ChallengeResponseAuthentication to 'no'. 
# WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several 
# problems. 
UsePAM yes   <==是否通过PAM验证 
 
#AllowAgentForwarding yes 
#AllowTcpForwarding yes 
#GatewayPorts no     <==是否允许远程主机连接本地的转发端口 
X11Forwarding yes    <==是否允许X11转发 
#X11DisplayOffset 10  <==指定sshd（8）X11转发的第一个可用的显示区(display)数字。默认值是10 
#X11UseLocalhost yes  <==是否应当将X11转发服务器绑定到本地loopback地址 
#PermitTTY yes 
#PrintMotd yes     <==指定sshd(8)是否在每一次交互式登录时打印 /etc/motd 文件的内容 
#PrintLastLog yes  <==指定sshd(8)是否在每一次交互式登录时打印最后一位用户的登录时间 
#TCPKeepAlive yes  <==指定系统是否向客户端发送 TCP keepalive 消息 
#UseLogin no   <==是否在交互式会话的登录过程中使用 login（1） 
#UsePrivilegeSeparation sandbox  <==是否让 sshd(8) 通过创建非特权子进程处理接入请求的方法来进行权限分离 
#PermitUserEnvironment no  <==指定是否允许sshd(8)处理~/.ssh/environment以及 ~/.ssh/authorized_keys中的 environment= 选项 
#Compression delayed  <==是否对通信数据进行加密，还是延迟到认证成功之后再对通信数据加密 
#ClientAliveInterval 0  <==sshd(8)长时间没有收到客户端的任何数据，不发送"alive"消息 
#ClientAliveCountMax 3   <==sshd(8)在未收到任何客户端回应前最多允许发送多个"alive"消息，默认值是 3  
#ShowPatchLevel no 
#UseDNS no      <==是否使用dns反向解析 
#PidFile /var/run/sshd.pid   <==指定存放SSH守护进程的进程号的路径 
#MaxStartups 10:30:100   <==最大允许保持多少个未认证的连接 
#PermitTunnel no   <==是否允许tun(4)设备转发 
#ChrootDirectory none 
#VersionAddendum none 
 
# no default banner path 
#Banner none  <==将这个指令指定的文件中的内容在用户进行认证前显示给远程用户，默认什么内容也不显示，"none"表示禁用这个特性 
 
# Accept locale-related environment variables 
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES 
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT 
AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE 
AcceptEnv XMODIFIERS 
 
# override default of no subsystems 
Subsystem       sftp    /usr/libexec/openssh/sftp-server   <==配置一个外部子系统sftp及其路径 
 
# Example of overriding settings on a per-user basis 
#Match User anoncvs    <==引入一个条件块。块的结尾标志是另一个 Match 指令或者文件结尾     
#       X11Forwarding no 
#       AllowTcpForwarding no 
#       PermitTTY no 
#       ForceCommand cvs server

追加Port 22222 然后重启服务

systemctl restart sshd