该文描述了三个路由器(R1,R2,R3)的网络配置，包括LoopBack接口和Ethernet接口的IP地址设定，以及使用RIP协议（版本2）进行路由信息交换，所有路由器都宣告了192.168.1.0网络，R3还宣告了3.0.0.0网络，并设置了RIP更新的定时器。
1.网络配置
(1)r1：[r1-LoopBack0]ip address 192.168.1.65 27
[r1-LoopBack1]ip address 192.168.1.97 27
r1]int e0/0/0
[r1-Ethernet0/0/0]ip address 192.168.1.1 30
[r1]rip
[r1-rip-1]version 2
r1-rip-1]network 192.168.1.0
[r1-rip-1]timers rip 15 90 150
(2)r2;[r2-LoopBack0]ip address 192.168.1.129 27
[r2-LoopBack1]ip address 192.168.1.161 27
[r2]int e0/0/1
[r2-Ethernet0/0/1]ip address 192.168.1.9 30
[r2-rip-1]version 2
[r2-rip-1]network 192.168.1.0
[r2-rip-1]timers rip 15 90 150
(3)r3:[r3-LoopBack0]ip address 3.3.3.1 24
[r3]int e0/0/0
[r3-Ethernet0/0/0]ip address 192.168.1.10 30
[r3-rip-1]version 2
[r3-rip-1]network 192.168.1.0
[r3-rip-1]network 3.0.0.0
[r3-rip-1]timers rip 15 90 150
4111
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
