vlan作业

要求

1、pc1和pc3所在接口为access;属于vlan 2；

pc2/pc4/pc5/pc6处于同一网段:其中pc2可以访问pc4/pc5/pc6，pc4可以访问pc6，pc5不能访问pc6；

2、PC4pc1/pc3与pc2/pc4/pc5/pc6不在同一网段;

3、所有pc通过DHCP获取Ip地址，且pc1/pc3可以正常访问pc2/pc4/pc5/pc6;

 1.vlan的创建

[sw1]vlan batch 2 to 6

[sw2]vlan batch 2 to 6

[sw3]vlan batch 2 to 6

LW1:

[sw1]int g0/0/1
 
[sw1-GigabitEthernet0/0/1]port link-type access
 
[sw1-GigabitEthernet0/0/1]port default vlan 2
 
[sw1]int g 0/0/2
 
[sw1-GigabitEthernet0/0/2]port link-type hybrid
 
[sw1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6
 
[sw1-GigabitEthernet0/0/2]port hybrid pvid vlan 3
 
[sw1]int g 0/0/3
 
[sw1-GigabitEthernet0/0/3]port link-type trunk
 
[sw1-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6
 
[sw1]int g 0/0/4
 
[sw1-GigabitEthernet0/0/4]p l h
 
[sw1-GigabitEthernet0/0/4]p h u v 3 4 5 6
 
[sw1-GigabitEthernet0/0/4]port hybrid tagged vlan 2

LW2:

[sw2]int g 0/0/1   
 
[sw2-GigabitEthernet0/0/1]port link-type access
 
[sw2-GigabitEthernet0/0/1]port default vlan 2
 
[sw2]int g 0/0/2
 
[sw2-GigabitEthernet0/0/2]p l h
 
[sw2-GigabitEthernet0/0/2]port hybrid pvid vlan 4
 
[sw2-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6
 
[sw2]int g 0/0/3
 
[sw2-GigabitEthernet0/0/3]p l t
 
[sw2-GigabitEthernet0/0/3]p t a v 2 t 6
 
[sw2]int g 0/0/4
 
[sw2-GigabitEthernet0/0/4]p l t
 
[sw2-GigabitEthernet0/0/4]p t a v 2 t 6

LW3:

[sw3]int g 0/0/1
 
[sw3-GigabitEthernet0/0/1]p l h
 
[sw3-GigabitEthernet0/0/1]p h p v 5
 
[sw3-GigabitEthernet0/0/1]p h u v 3 4 5
 
[sw3]int g 0/0/2
 
[sw3-GigabitEthernet0/0/2]p l h
 
[sw3-GigabitEthernet0/0/2]p h p v 6
 
[sw3-GigabitEthernet0/0/2]p h u v 3 4 6
 
[sw3]int g 0/0/3
 
[sw3-GigabitEthernet0/0/3]p l t
 
[sw3-GigabitEthernet0/0/3]p t a v
 
      
 
[sw3-GigabitEthernet0/0/3]p t a v 2 3 4 5 6

2.两个地址池的配置问题：

在路由器R1上进行配置

[R1]int g 0/0/0
 
[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
 
[R1-GigabitEthernet0/0/0]int g 0/0/0.1
 
[R1-GigabitEthernet0/0/0.1]ip address 192.168.2.1 24
 
[R1-GigabitEthernet0/0/0.1]dot1q termination vid 2
 
[R1-GigabitEthernet0/0/0.1]arp broadcast enable

[R1]dhcp enable
 
[R1]ip pool aa
 
Info: It's successful to create an IP address pool.
[R1-ip-pool-aa]network 192.168.1.0 mask 24
[R1-ip-pool-aa]gateway-list 192.168.1.1 
[R1-ip-pool-aa]dns-list 114.114.114.114
[R1-ip-pool-aa]q
[R1]ip pool bb
Info: It's successful to create an IP address pool.
 
[R1-ip-pool-bb]network 192.168.2.0 mask 24
 
[R1-ip-pool-bb]gateway-list 192.168.2.1
 
[R1-ip-pool-bb]dns-list 114.114.114.114