【单片机】[LED]：LED 不同频率闪烁的程序

main.c 程序源代码：

// =========================== main.c ======================

#include "reg51.h"

#define LED_ON	20
#define LED_OFF	0
#define F_1HZ 	1
#define F_2HZ 	2
#define F_3HZ 	3
#define F_4HZ 	4
#define F_5HZ 	5
#define F_6HZ 	6
#define F_7HZ 	7
#define F_8HZ 	8
#define F_9HZ 	9
#define F_10HZ 	10

sbit LED1 = P2.0;                   // 定义LED IO口

unsigned char g_u8_LedFrequence;    // 按键值
unsigned char g_flag_10ms_led;      // 10ms 计时标志


//LED 以不同频率闪烁
//LED 亮的时间是：100ms
//LED 灭的时间是：相应周期 - 100ms
//LED 频率的范围：0-10 hz
void LED1_Flash(unsigned char flash_frequence)
{
	static byte count, flash_period;

	//根据频率选择周期
	switch(flash_frequence)
	{
		case F_1HZ :	flash_period = 100; break;		//1 hz
		case F_2HZ :	flash_period = 50; 	break;		//2 hz
		case F_3HZ :	flash_period = 34; 	break;		//3 hz
		case F_4HZ :	flash_period = 25; 	break;		//4 hz
		case F_5HZ :	flash_period = 20; 	break;		//5 hz
		case F_6HZ :	flash_period = 17; 	break;		//6 hz
		case F_7HZ :	flash_period = 14; 	break;		//7 hz
		case F_8HZ :	flash_period = 12; 	break;		//8 hz
		case F_9HZ :	flash_period = 11; 	break;		//9 hz
		case F_10HZ :	flash_period = 10; 	break;		//10 hz
		case LED_ON:	count = 0; 			break;		//led on
		case LED_OFF:	count = 9; 			break;		//led off
	}

	//根据周期闪烁
	if(g_flag_10ms_led)									//此标志在中断服务程序中，每10ms置一一次。
	{
		g_flag_10ms_led = 0;							//清零 led的10ms计数标志，

		count++;										//计数器

		if(count==1) 			LED1 = 1;				//点亮LED LED亮的时间：1-10 
		else if(count == 10) 	LED1 = 0;				//熄灭LED LED灭的时间：10-flash_period
		else if(count >= flash_period) 	count = 0;		//清零计数
	}
}


void LED1_Flash(unsigned char flash_frequence);			// 声明LED flash函数


void T0_Init_10ms(void)									// timer0，初始化函数 ，定时时间为 10ms
{
    TMOD |= 0x01;
    TH0 = (65535 - 10000)/256;
    TL0 = (65535 - 10000)%256;

    ET0 = 1;
    TR0 = 1;
    EA = 1;
}

// ================================================  主函数 ===================================================
void main(void)
{
    P1.0 = 1;           								// P1.0 拉高
    T0_Init_10ms();     								// 定时器0，初始化，定时10ms
	
    g_u8_LedFrequence = F_3HZ;							// 设置LED闪烁的频率值，3hz

    while(1)
    {
        LED1_Flash(g_u8_LedFrequence);					// LED闪烁
    }
}

// timer0 中断服务程序
void IRQ_T0(void) interrupt 1
{
    g_flag_10ms_led = 1;                        		// 置位 10ms 定时标志
}