asterisk中asmanager的配置文件

[phpagi.conf]
[asmanager]
server=localhost        ; server to connect to
port=5038                ; default manager port
username=phpagi            ; username for login
secret=phpagi            ; password for login

[festival]
text2wave=/usr/bin/text2wave
tempdir=/tmp/
[phpagi]
#error_handler=true
#debug=tru



manager.conf:w
;
; AMI - The Asterisk Manager Interface
;
; Third party application call management support and PBX event supervision
;
; This configuration file is read every time someone logs in
;
; Use the "show manager commands" at the CLI to list available manager commands
; and their authorization levels.
;
; "show manager command <command>" will show a help text.
;
; ---------------------------- SECURITY NOTE -------------------------------
; Note that you should not enable the AMI on a public IP address. If needed,
; block this TCP port with iptables (or another FW software) and reach it
; with IPsec, SSH, or SSL vpn tunnel
;
[general]
enabled = yes
port = 5038
bindaddr = 0.0.0.0
;displayconnects = yes
[phpagi]
secret=phpagi
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user
write = system,call,log,verbose,command,agent,user
;[mark]
;secret = mysecret
;deny=0.0.0.0/0.0.0.0
;permit=209.16.236.73/255.255.255.0
;
; If the device connected via this user accepts input slowly,
; the timeout for writes to it can be increased to keep it
; from being disconnected (value is in milliseconds)
;
; writetimeout = 100
;
; Authorization for various classes
;read = system,call,log,verbose,command,agent,user
;write = system,call,log,verbose,command,agent,user