http://bbs.chinaunix.net/thread-1964789-1-1.html
<!--
-->
空间积分
-
0
信誉积分
-
50
UID
-
17135777
阅读权限
-
100
积分
-
1025
帖子
-
4467
精华
-
1
可用积分
-
1026
专家积分
-
20
在线时间
-
3751 小时
注册时间
-
2008-03-04
最后登录
-
2012-02-02
帖子
-
4467
主题
-
452
精华
-
1
可用积分
-
1026
专家积分
-
20
在线时间
-
3751 小时
注册时间
-
2008-03-04
最后登录
-
2012-02-02
论坛徽章:
-
0
|
我的以前是eth5 root@ubuntu:/etc/udev/rules.d# ifconfig eth5 Link encap:Ethernet HWaddr 00:0c:29:c6:bc:7c inet addr:192.168.16.25 Bcast:192.168.16.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fec6:bc7c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1111 errors:0 dropped:0 overruns:0 frame:0 TX packets:871 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:152479 (152.4 KB) TX bytes:106075 (106.0 KB) Interrupt:18 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4000 (4.0 KB) TX bytes:4000 (4.0 KB) 更改如下文件,看好你的mac地址 root@ubuntu:/etc/udev/rules.d# vim /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single line. # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:0e:ad:8a", ATTR{type}=="1", KERNEL=="eth*", NAME="eth5" # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:26:0b:66", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:d5:16:28", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:fe:47:db", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3" # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:3e:b1:4f", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4" 下面这里mac地址我对应的,是eth5,我改为eth0了 # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:c6:bc:7c", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" root@ubuntu:/etc/udev/rules.d# init 6 重启后从新登录 root@ubuntu:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:29:c6:bc:7c inet addr:192.168.16.25 Bcast:192.168.16.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fec6:bc7c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:34 errors:0 dropped:0 overruns:0 frame:0 TX packets:82 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8409 (8.4 KB) TX bytes:11509 (11.5 KB) Interrupt:18 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:108 errors:0 dropped:0 overruns:0 frame:0 TX packets:108 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:6124 (6.1 KB) TX bytes:6124 (6.1 KB) |
|