主要的事情:
步骤一:选定你的网络配置
步骤二:为你的资源设置一个集群
步骤三:设置你的CA(译注:证书颁发机构)节点
步骤四:用CA来创建身份和MSP
步骤五:部署节点
-创建order节点
-创建peer节点
前置准备:下载hyperledger-fabric-linux-amd64-2.4.1.tar.gz(网址:https://github.com/hyperledger/fabric/releases)需要科学上网
生成身份信息
一、生成身份信息文件
1.解压该文件得到了一个bin目录和一个config目录,进入bin目录下执行命令,得到crypto-config.yaml文件以后会用到
cd bin/
./cryptogen showtemplate > ../crypto-config.yaml
2.编辑crypto-config.yaml文件,如果无法编辑,注意修改权限
# ---------------------------------------------------------------------------
# "OrdererOrgs" - Definition of organizations managing orderer nodes
# ---------------------------------------------------------------------------
OrdererOrgs:
# ---------------------------------------------------------------------------
# Orderer
# ---------------------------------------------------------------------------
- Name: Orderer
Domain: example.com
# 需要进行修改1
EnableNodeOUs: true
# ---------------------------------------------------------------------------
# "Specs" - See PeerOrgs below for complete description
# ---------------------------------------------------------------------------
#需要进行修改2
Specs:
- Hostname: orderer0
- Hostname: orderer1
- Hostname: orderer2
# ---------------------------------------------------------------------------
# "PeerOrgs" - Definition of organizations managing peer nodes
# ---------------------------------------------------------------------------
PeerOrgs:
# ---------------------------------------------------------------------------
# Org1
# ---------------------------------------------------------------------------
- Name: Org1
Domain: org1.example.com
#需要进行修改3
EnableNodeOUs: true
# ---------------------------------------------------------------------------
# "CA"
# ---------------------------------------------------------------------------
# Uncomment this section to enable the explicit definition of the CA for this
# organization. This entry is a Spec. See "Specs" section below for details.
# ---------------------------------------------------------------------------
# CA:
# Hostname: ca # implicitly ca.org1.example.com
# Country: US
# Province: California
# Locality: San Francisco
# OrganizationalUnit: Hyperledger Fabric
# StreetAddress: address for org # default nil
# PostalCode: postalCode for org # default nil
# ---------------------------------------------------------------------------
# "Specs"
# ---------------------------------------------------------------------------
# Uncomment this section to enable the explicit definition of hosts in your
# configuration. Most users will want to use Template, below
#
# Specs is an array of Spec entries. Each Spec entry consists of two fields:
# - Hostname: (Required) The desired hostname, sans the domain.
# - CommonName: (Optional) Specifies the template or explicit override for
# the CN. By default, this is the template:
#
# "{{.Hostname}}.{{.Domain}}"
#
# which obtains its values from the Spec.Hostname and
# Org.Domain, respectively.
# - SANS: (Optional) Specifies one or more Subject Alternative Names
# to be set in the resulting x509. Accepts template
# variables {{.Hostname}}, {{.Domain}}, {{.CommonName}}. IP
# addresses provided here will be properly recognized. Other
# values will be taken as DNS names.
# NOTE: Two implicit entries are created for you:
# - {{ .CommonName }}
# - {{ .Hostname }}
# ---------------------------------------------------------------------------
# Specs:
# - Hostname: foo # implicitly "foo.org1.example.com"
# CommonName: foo27.org5.example.com # overrides Hostname-based FQDN set above
# SANS:
# - "bar.{{.Domain}}"
# - "altfoo.{{.Domain}}"
# - "{{.Hostname}}.org6.net"
# - 172.16.10.31
# - Hostname: bar
# - Hostname: baz
# ---------------------------------------------------------------------------
# "Template"
# ---------------------------------------------------------------------------
# Allows for the definition of 1 or more hosts that are created sequentially
# from a template. By default, this looks like "peer%d" from 0 to Count-1.
# You may override the number of nodes (Count), the starting index (Start)
# or the template used to construct the name (Hostname).
#
# Note: Template and Specs are not mutually exclusive. You may define both
# sections and the aggregate nodes will be created for you. Take care with
# name collisions
# ---------------------------------------------------------------------------
Template:
#需要进行修改4
Count: 2
# Start: 5
# Hostname: {{.Prefix}}{{.Index}} # default
# SANS:
# - "{{.Hostname}}.alt.{{.Domain}}"
# ---------------------------------------------------------------------------
# "Users"
# ---------------------------------------------------------------------------
# Count: The number of user accounts _in addition_ to Admin
# ---------------------------------------------------------------------------
Users:
Count: 1
# ---------------------------------------------------------------------------
# Org2: See "Org1" for full specification
# ---------------------------------------------------------------------------
- Name: Org2
Domain: org2.example.com
#需要进行修改5
EnableNodeOUs: true
Template:
#需要进行修改6
Count: 2
Users:
Count: 1
#共计6处需要修改
3.编辑完成以后,回到bin目录
—config指定之前生成的文件地址
--output指定生成的文件存放地址
cd bin/
./cryptogen generate --config=../crypto-config.yaml --output=../crypto-config
二、生成排序节点的创世区块文件
-
回到上级目录,进入config目录,创世区块需要根据configtx.yaml 这个文件
cd ../config/
-
编辑这个文件(这个文件太大,建议下载下来之后进行编辑,怕修改错误,可以先进行备份-bak
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
---
################################################################################
#
# ORGANIZATIONS
#
# This section defines the organizational identities that can be referenced
# in the configuration profiles.
#
################################################################################
Organizations:
# SampleOrg defines an MSP using the sampleconfig. It should never be used
# in production but may be used as a template for other definitions.
#需要修改1
- &OrdererOrg
# Name is the key by which this org will be referenced in channel
# configuration transactions.
# Name can include alphanumeric characters as well as dots and dashes.
#需要修改2
Name: OrdererOrg
# SkipAsForeign can be set to true for org definitions which are to be
# inherited from the orderer system channel during channel creation. This
# is especially useful when an admin of a single org without access to the
# MSP directories of the other orgs wishes to create a channel. Note
# this property must always be set to false for orgs included in block
# creation.
SkipAsForeign: false
# ID is the key by which this org's MSP definition will be referenced.
# ID can include alphanumeric characters as well as dots and dashes.
#需要修改3
ID: OrdererMSP
# MSPDir is the filesystem path which contains the MSP configuration.
#需要修改4,此处指定之前生成的信息文件的路径
MSPDir: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/msp
# Policies defines the set of policies at this level of the config tree
# For organization policies, their canonical path is usually
# /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
#需要修改5
Policies:
Readers:
Type: Signature
#需要修改6
Rule: "OR('OrdererMSP.member')"
# If your MSP is configured with the new NodeOUs, you might
# want to use a more specific rule like the following:
# Rule: "OR('SampleOrg.admin', 'SampleOrg.peer', 'SampleOrg.client')"
Writers:
Type: Signature
#需要修改7
Rule: "OR('OrdererMSP.member')"
# If your MSP is configured with the new NodeOUs, you might
# want to use a more specific rule like the following:
# Rule: "OR('SampleOrg.admin', 'SampleOrg.client')"
Admins:
Type: Signature
#需要修改8
Rule: "OR('OrdererMSP.admin')"
Endorsement:
Type: Signature
#需要修改9
Rule: "OR('OrdererMSP.member')"
# OrdererEndpoints is a list of all orderers this org runs which clients
# and peers may to connect to to push transactions and receive blocks respectively.
OrdererEndpoints:
#需要修改10,按照自己的配置进行修改,如果是真是的环境是不需要修改端口的,这里是在一台电脑上进行模拟
- "orderer0.example.com:7050"
- "orderer1.example.com:8050"
- "orderer2.example.com:9050"
# AnchorPeers defines the location of peers which can be used for
# cross-org gossip communication.
#
# NOTE: this value should only be set when using the deprecated
# `configtxgen --outputAnchorPeersUpdate` command. It is recommended
# to instead use the channel configuration update process to set the
# anchor peers for each organization.
#需要修改11,定义锚节点,不需要,可以注释掉,下一处在260行左右
#AnchorPeers:
# - Host: 127.0.0.1
# Port: 7051
#需要修改16,把内容改为自己的
- &Org1
Name: Org1MSP
ID: Org1MSP
MSPDir: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/msp
Policies:
Readers:
Type: Signature
Rule: "OR('Org1MSP.admin', 'Org1MSP.peer', 'Org1MSP.client')"
Writers:
Type: Signature
Rule: "OR('Org1MSP.admin', 'Org1MSP.client')"
Admins:
Type: Signature
Rule: "OR('Org1MSP.admin')"
Endorsement:
Type: Signature
Rule: "OR('Org1MSP.peer')"
AnchorPeers:
- Host: peer0.org1.example.com
Port: 7051
- &Org2
Name: Org2MSP
ID: Org2MSP
MSPDir: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/msp
Policies:
Readers:
Type: Signature
Rule: "OR('Org2MSP.admin', 'Org2MSP.peer', 'Org2MSP.client')"
Writers:
Type: Signature
Rule: "OR('Org2MSP.admin', 'Org2MSP.client')"
Admins:
Type: Signature
Rule: "OR('Org2MSP.admin')"
Endorsement:
Type: Signature
Rule: "OR('Org2MSP.peer')"
AnchorPeers:
- Host: peer0.org2.example.com
Port: 9051
################################################################################
#
# CAPABILITIES
#
# This section defines the capabilities of fabric network. This is a new
# concept as of v1.1.0 and should not be utilized in mixed networks with
# v1.0.x peers and orderers. Capabilities define features which must be
# present in a fabric binary for that binary to safely participate in the
# fabric network. For instance, if a new MSP type is added, newer binaries
# might recognize and validate the signatures from this type, while older
# binaries without this support would be unable to validate those
# transactions. This could lead to different versions of the fabric binaries
# having different world states. Instead, defining a capability for a channel
# informs those binaries without this capability that they must cease
# processing transactions until they have been upgraded. For v1.0.x if any
# capabilities are defined (including a map with all capabilities turned off)
# then the v1.0.x peer will deliberately crash.
#
################################################################################
Capabilities:
# Channel capabilities apply to both the orderers and the peers and must be
# supported by both.
# Set the value of the capability to true to require it.
Channel: &ChannelCapabilities
# V2.0 for Channel is a catchall flag for behavior which has been
# determined to be desired for all orderers and peers running at the v2.0.0
# level, but which would be incompatible with orderers and peers from
# prior releases.
# Prior to enabling V2.0 channel capabilities, ensure that all
# orderers and peers on a channel are at v2.0.0 or later.
V2_0: true
# Orderer capabilities apply only to the orderers, and may be safely
# used with prior release peers.
# Set the value of the capability to true to require it.
Orderer: &OrdererCapabilities
# V1.1 for Orderer is a catchall flag for behavior which has been
# determined to be desired for all orderers running at the v1.1.x
# level, but which would be incompatible with orderers from prior releases.
# Prior to enabling V2.0 orderer capabilities, ensure that all
# orderers on a channel are at v2.0.0 or later.
V2_0: true
# Application capabilities apply only to the peer network, and may be safely
# used with prior release orderers.
# Set the value of the capability to true to require it.
Application: &ApplicationCapabilities
# V2.0 for Application enables the new non-backwards compatible
# features and fixes of fabric v2.0.
# Prior to enabling V2.0 orderer capabilities, ensure that all
# orderers on a channel are at v2.0.0 or later.
V2_0: true
################################################################################
#
# APPLICATION
#
# This section defines the values to encode into a config transaction or
# genesis block for application-related parameters.
#
################################################################################
Application: &ApplicationDefaults
ACLs: &ACLsDefault
# This section provides defaults for policies for various resources
# in the system. These "resources" could be functions on system chaincodes
# (e.g., "GetBlockByNumber" on the "qscc" system chaincode) or other resources
# (e.g.,who can receive Block events). This section does NOT specify the resource's
# definition or API, but just the ACL policy for it.
#
# Users can override these defaults with their own policy mapping by defining the
# mapping under ACLs in their channel definition
#---New Lifecycle System Chaincode (_lifecycle) function to policy mapping for access control--#
# ACL policy for _lifecycle's "CheckCommitReadiness" function
_lifecycle/CheckCommitReadiness: /Channel/Application/Writers
# ACL policy for _lifecycle's "CommitChaincodeDefinition" function
_lifecycle/CommitChaincodeDefinition: /Channel/Application/Writers
# ACL policy for _lifecycle's "QueryChaincodeDefinition" function
_lifecycle/QueryChaincodeDefinition: /Channel/Application/Writers
# ACL policy for _lifecycle's "QueryChaincodeDefinitions" function
_lifecycle/QueryChaincodeDefinitions: /Channel/Application/Writers
#---Lifecycle System Chaincode (lscc) function to policy mapping for access control---#
# ACL policy for lscc's "getid" function
lscc/ChaincodeExists: /Channel/Application/Readers
# ACL policy for lscc's "getdepspec" function
lscc/GetDeploymentSpec: /Channel/Application/Readers
# ACL policy for lscc's "getccdata" function
lscc/GetChaincodeData: /Channel/Application/Readers
# ACL Policy for lscc's "getchaincodes" function
lscc/GetInstantiatedChaincodes: /Channel/Application/Readers
#---Query System Chaincode (qscc) function to policy mapping for access control---#
# ACL policy for qscc's "GetChainInfo" function
qscc/GetChainInfo: /Channel/Application/Readers
# ACL policy for qscc's "GetBlockByNumber" function
qscc/GetBlockByNumber: /Channel/Application/Readers
# ACL policy for qscc's "GetBlockByHash" function
qscc/GetBlockByHash: /Channel/Application/Readers
# ACL policy for qscc's "GetTransactionByID" function
qscc/GetTransactionByID: /Channel/Application/Readers
# ACL policy for qscc's "GetBlockByTxID" function
qscc/GetBlockByTxID: /Channel/Application/Readers
#---Configuration System Chaincode (cscc) function to policy mapping for access control---#
# ACL policy for cscc's "GetConfigBlock" function
cscc/GetConfigBlock: /Channel/Application/Readers
# ACL policy for cscc's "GetChannelConfig" function
cscc/GetChannelConfig: /Channel/Application/Readers
#---Miscellaneous peer function to policy mapping for access control---#
# ACL policy for invoking chaincodes on peer
peer/Propose: /Channel/Application/Writers
# ACL policy for chaincode to chaincode invocation
peer/ChaincodeToChaincode: /Channel/Application/Writers
#---Events resource to policy mapping for access control###---#
# ACL policy for sending block events
event/Block: /Channel/Application/Readers
# ACL policy for sending filtered block events
event/FilteredBlock: /Channel/Application/Readers
# Organizations lists the orgs participating on the application side of the
# network.
Organizations:
# Policies defines the set of policies at this level of the config tree
# For Application policies, their canonical path is
# /Channel/Application/<PolicyName>
Policies: &ApplicationDefaultPolicies
LifecycleEndorsement:
Type: ImplicitMeta
Rule: "MAJORITY Endorsement"
Endorsement:
Type: ImplicitMeta
Rule: "MAJORITY Endorsement"
Readers:
Type: ImplicitMeta
Rule: "ANY Readers"
Writers:
Type: ImplicitMeta
Rule: "ANY Writers"
Admins:
Type: ImplicitMeta
Rule: "MAJORITY Admins"
# Capabilities describes the application level capabilities, see the
# dedicated Capabilities section elsewhere in this file for a full
# description
Capabilities:
<<: *ApplicationCapabilities
################################################################################
#
# ORDERER
#
# This section defines the values to encode into a config transaction or
# genesis block for orderer related parameters.
#
################################################################################
Orderer: &OrdererDefaults
# Orderer Type: The orderer implementation to start.
# Available types are "solo", "kafka" and "etcdraft".
#需要修改12
OrdererType: etcdraft
# Addresses used to be the list of orderer addresses that clients and peers
# could connect to. However, this does not allow clients to associate orderer
# addresses and orderer organizations which can be useful for things such
# as TLS validation. The preferred way to specify orderer addresses is now
# to include the OrdererEndpoints item in your org definition
#需要修改13
Addresses:
# - 127.0.0.1:7050
- "orderer0.example.com:7050"
- "orderer1.example.com:8050"
- "orderer2.example.com:9050"
# Batch Timeout: The amount of time to wait before creating a batch.
BatchTimeout: 2s
# Batch Size: Controls the number of messages batched into a block.
# The orderer views messages opaquely, but typically, messages may
# be considered to be Fabric transactions. The 'batch' is the group
# of messages in the 'data' field of the block. Blocks will be a few kb
# larger than the batch size, when signatures, hashes, and other metadata
# is applied.
BatchSize:
# Max Message Count: The maximum number of messages to permit in a
# batch. No block will contain more than this number of messages.
MaxMessageCount: 500
# Absolute Max Bytes: The absolute maximum number of bytes allowed for
# the serialized messages in a batch. The maximum block size is this value
# plus the size of the associated metadata (usually a few KB depending
# upon the size of the signing identities). Any transaction larger than
# this value will be rejected by ordering.
# It is recommended not to exceed 49 MB, given the default grpc max message size of 100 MB
# configured on orderer and peer nodes (and allowing for message expansion during communication).
AbsoluteMaxBytes: 10 MB
# Preferred Max Bytes: The preferred maximum number of bytes allowed
# for the serialized messages in a batch. Roughly, this field may be considered
# the best effort maximum size of a batch. A batch will fill with messages
# until this size is reached (or the max message count, or batch timeout is
# exceeded). If adding a new message to the batch would cause the batch to
# exceed the preferred max bytes, then the current batch is closed and written
# to a block, and a new batch containing the new message is created. If a
# message larger than the preferred max bytes is received, then its batch
# will contain only that message. Because messages may be larger than
# preferred max bytes (up to AbsoluteMaxBytes), some batches may exceed
# the preferred max bytes, but will always contain exactly one transaction.
PreferredMaxBytes: 2 MB
# Max Channels is the maximum number of channels to allow on the ordering
# network. When set to 0, this implies no maximum number of channels.
MaxChannels: 0
Kafka:
# Brokers: A list of Kafka brokers to which the orderer connects. Edit
# this list to identify the brokers of the ordering service.
# NOTE: Use IP:port notation.
Brokers:
- kafka0:9092
- kafka1:9092
- kafka2:9092
# EtcdRaft defines configuration which must be set when the "etcdraft"
# orderertype is chosen.
EtcdRaft:
# The set of Raft replicas for this network. For the etcd/raft-based
# implementation, we expect every replica to also be an OSN. Therefore,
# a subset of the host:port items enumerated in this list should be
# replicated under the Orderer.Addresses key above.
Consenters:
#需要修改14,下面进行统一修改,不进行额外编号,修改orderer的012即可
- Host: orderer0.example.com
Port: 7050
ClientTLSCert: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/server.crt
ServerTLSCert: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/server.crt
- Host: orderer1.example.com
Port: 7050
ClientTLSCert: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer1.example.com/tls/server.crt
ServerTLSCert: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer1.example.com/tls/server.crt
- Host: orderer2.example.com
Port: 7050
ClientTLSCert: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer2.example.com/tls/server.crt
ServerTLSCert: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer2.example.com/tls/server.crt
# Options to be specified for all the etcd/raft nodes. The values here
# are the defaults for all new channels and can be modified on a
# per-channel basis via configuration updates.
Options:
# TickInterval is the time interval between two Node.Tick invocations.
TickInterval: 500ms
# ElectionTick is the number of Node.Tick invocations that must pass
# between elections. That is, if a follower does not receive any
# message from the leader of current term before ElectionTick has
# elapsed, it will become candidate and start an election.
# ElectionTick must be greater than HeartbeatTick.
ElectionTick: 10
# HeartbeatTick is the number of Node.Tick invocations that must
# pass between heartbeats. That is, a leader sends heartbeat
# messages to maintain its leadership every HeartbeatTick ticks.
HeartbeatTick: 1
# MaxInflightBlocks limits the max number of in-flight append messages
# during optimistic replication phase.
MaxInflightBlocks: 5
# SnapshotIntervalSize defines number of bytes per which a snapshot is taken
SnapshotIntervalSize: 16 MB
# Organizations lists the orgs participating on the orderer side of the
# network.
Organizations:
# Policies defines the set of policies at this level of the config tree
# For Orderer policies, their canonical path is
# /Channel/Orderer/<PolicyName>
Policies:
Readers:
Type: ImplicitMeta
Rule: "ANY Readers"
Writers:
Type: ImplicitMeta
Rule: "ANY Writers"
Admins:
Type: ImplicitMeta
Rule: "MAJORITY Admins"
# BlockValidation specifies what signatures must be included in the block
# from the orderer for the peer to validate it.
BlockValidation:
Type: ImplicitMeta
Rule: "ANY Writers"
# Capabilities describes the orderer level capabilities, see the
# dedicated Capabilities section elsewhere in this file for a full
# description
Capabilities:
<<: *OrdererCapabilities
################################################################################
#
# CHANNEL
#
# This section defines the values to encode into a config transaction or
# genesis block for channel related parameters.
#
################################################################################
Channel: &ChannelDefaults
# Policies defines the set of policies at this level of the config tree
# For Channel policies, their canonical path is
# /Channel/<PolicyName>
Policies:
# Who may invoke the 'Deliver' API
Readers:
Type: ImplicitMeta
Rule: "ANY Readers"
# Who may invoke the 'Broadcast' API
Writers:
Type: ImplicitMeta
Rule: "ANY Writers"
# By default, who may modify elements at this config level
Admins:
Type: ImplicitMeta
Rule: "MAJORITY Admins"
# Capabilities describes the channel level capabilities, see the
# dedicated Capabilities section elsewhere in this file for a full
# description
Capabilities:
<<: *ChannelCapabilities
################################################################################
#
# PROFILES
#
# Different configuration profiles may be encoded here to be specified as
# parameters to the configtxgen tool. The profiles which specify consortiums
# are to be used for generating the orderer genesis block. With the correct
# consortium members defined in the orderer genesis block, channel creation
# requests may be generated with only the org member names and a consortium
# name.
#
################################################################################
# 需要修改15删除原来的替换为以下内容
Profiles:
# SampleSingleMSPSolo defines a configuration which uses the Solo orderer,
# and contains a single MSP definition (the MSP sampleconfig).
# The Consortium SampleConsortium has only a single member, SampleOrg.
TwoOrgsOrdererGenesis:
<<: *ChannelDefaults
Orderer:
<<: *OrdererDefaults
Organizations:
- *OrdererOrg
Capabilities:
<<: *OrdererCapabilities
Consortiums:
SampleConsortium:
Organizations:
- *Org1
- *Org2
TwoOrgsChannel:
Consortium: SampleConsortium
<<: *ChannelDefaults
Application:
<<: *ApplicationDefaults
Organizations:
- *Org1
- *Org2
Capabilities:
<<: *ApplicationCapabilities
#共大概16处需要修改
-
生成创世区块,进入bin目录执行以下命令
./configtxgen -configPath ../config -profile TwoOrgsOrdererGenesis -channelID fabric-channel -outputBlock ../channel-artifacts/orderer.genesis.block
出现以下输出代表执行成功
022-10-04 20:59:03.475 PDT 0001 INFO [common.tools.configtxgen] main -> Loading configuration 2022-10-04 20:59:03.507 PDT 0002 INFO [common.tools.configtxgen.localconfig] completeInitialization -> orderer type: etcdraft 2022-10-04 20:59:03.507 PDT 0003 INFO [common.tools.configtxgen.localconfig] Load -> Loaded configuration: ../config/configtx.yaml 2022-10-04 20:59:03.511 PDT 0004 INFO [common.tools.configtxgen] doOutputBlock -> Generating genesis block 2022-10-04 20:59:03.512 PDT 0005 INFO [common.tools.configtxgen] doOutputBlock -> Creating system channel genesis block 2022-10-04 20:59:03.513 PDT 0006 INFO [common.tools.configtxgen] doOutputBlock -> Writing genesis block
-
生成通道文件,给通道文件起名为businesschannel
./configtxgen -configPath ../config -profile TwoOrgsChannel -channelID businesschannel -outputCreateChannelTx ../channel-artifacts/businesschannel.tx
出现以下输出则执行成功
2022-10-04 21:05:52.646 PDT 0001 INFO [common.tools.configtxgen] main -> Loading configuration
2022-10-04 21:05:52.689 PDT 0002 INFO [common.tools.configtxgen.localconfig] Load -> Loaded configuration: ../config/configtx.yaml
2022-10-04 21:05:52.689 PDT 0003 INFO [common.tools.configtxgen] doOutputChannelCreateTx -> Generating new channel configtx
2022-10-04 21:05:52.692 PDT 0004 INFO [common.tools.configtxgen] doOutputChannelCreateTx -> Writing new channel tx
- 生成锚节点配置更新文件,执行以下两条命令
./configtxgen -configPath ../config -profile TwoOrgsChannel -channelID businesschannel -asOrg Org1MSP -outputAnchorPeersUpdate ../channel-artifacts/Org1MSPanchors.tx
./configtxgen -configPath ../config -profile TwoOrgsChannel -channelID businesschannel -asOrg Org2MSP -outputAnchorPeersUpdate ../channel-artifacts/Org2MSPanchors.tx
两次的正确输出均为,则代表生成成功
2022-10-04 21:09:17.269 PDT 0001 INFO [common.tools.configtxgen] main -> Loading configuration
2022-10-04 21:09:17.316 PDT 0002 INFO [common.tools.configtxgen.localconfig] Load -> Loaded configuration: ../config/configtx.yaml
2022-10-04 21:09:17.316 PDT 0003 INFO [common.tools.configtxgen] doOutputAnchorPeersUpdate -> Generating anchor peer update
2022-10-04 21:09:17.318 PDT 0004 INFO [common.tools.configtxgen] doOutputAnchorPeersUpdate -> Writing anchor peer update
- 检查目录下channel-artifacts,若channel-artifacts的树形目录为以下四个文件,则代表成功
channel-artifacts/
├── businesschannel.tx
├── orderer.genesis.block
├── Org1MSPanchors.tx
└── Org2MSPanchors.tx
如果想选择docker方式部署,按照另外一篇文章docker部署多机fabric
下面的内容实在本地部署的
部署order节点
一、前置网络划分
需要在/etc/hosts文件中进行修改
节点 | 宿主机 IP | hosts | 端口 |
---|---|---|---|
cli | 127.0.0.1 | N/A | N/A |
orderer0 | 127.0.0.1 | orderer0.example.com | 7050 , 8443 , 9443 |
orderer1 | 127.0.0.1 | orderer1.example.com | 8050 , 8444 ,9444 |
orderer2 | 127.0.0.1 | orderer2.example.com | 9050 , 8445 ,9445 |
二、部署三个order节点
-
创建三个文件夹orderer0,orderer1,orderer2用于生成文件
-
演示orderer0,orderer1与orderer2的操作类似,修改对应位置即可
-
在项目的根目录下创建orderer0,将bin目录的orderer文件和config目录的orderer.yaml拷贝到orderer0文件中
mkdir orderer0 cp bin/orderer config/orderer.yaml orderer0/
-
编辑orderer.yaml文件
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
---
################################################################################
#
# Orderer Configuration
#
# - This controls the type and configuration of the orderer.
#
################################################################################
General:
# Listen address: The IP on which to bind to listen.
#需要修改1,修改ip为虚拟机的ip,模拟默认是本地回环地址,可不进行修改
ListenAddress: 127.0.0.1
# Listen port: The port on which to bind to listen.
ListenPort: 7050
# TLS: TLS settings for the GRPC server.
TLS:
# Require server-side TLS
# 需要修改2,改为true
Enabled: false
# PrivateKey governs the file location of the private key of the TLS certificate.
#需要修改3,PrivateKey,Certificate,RootCAs改为本地的绝对路径
PrivateKey: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/server.key
# Certificate governs the file location of the server TLS certificate.
Certificate: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/server.crt
# RootCAs contains a list of additional root certificates used for verifying certificates
# of other orderer nodes during outbound connections.
# It is not required to be set, but can be used to augment the set of TLS CA certificates
# available from the MSPs of each channel’s configuration.
RootCAs:
- /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/ca.crt
# Require client certificates / mutual TLS for inbound connections.
ClientAuthRequired: false
# If mutual TLS is enabled, ClientRootCAs contains a list of additional root certificates
# used for verifying certificates of client connections.
# It is not required to be set, but can be used to augment the set of TLS CA certificates
# available from the MSPs of each channel’s configuration.
ClientRootCAs:
# Keepalive settings for the GRPC server.
Keepalive:
# ServerMinInterval is the minimum permitted time between client pings.
# If clients send pings more frequently, the server will
# disconnect them.
ServerMinInterval: 60s
# ServerInterval is the time between pings to clients.
ServerInterval: 7200s
# ServerTimeout is the duration the server waits for a response from
# a client before closing the connection.
ServerTimeout: 20s
# Since all nodes should be consistent it is recommended to keep
# the default value of 100MB for MaxRecvMsgSize & MaxSendMsgSize
# Max message size in bytes the GRPC server and client can receive
MaxRecvMsgSize: 104857600
# Max message size in bytes the GRPC server and client can send
MaxSendMsgSize: 104857600
# Cluster settings for ordering service nodes that communicate with other ordering service nodes
# such as Raft based ordering service.
#,需要修改4 ,ClientCertificate,ClientPrivateKey因为模拟生产环境,所以这里也需要修改
Cluster:
# SendBufferSize is the maximum number of messages in the egress buffer.
# Consensus messages are dropped if the buffer is full, and transaction
# messages are waiting for space to be freed.
SendBufferSize: 10
# ClientCertificate governs the file location of the client TLS certificate
# used to establish mutual TLS connections with other ordering service nodes.
# If not set, the server General.TLS.Certificate is re-used.
ClientCertificate: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/server.crt
# ClientPrivateKey governs the file location of the private key of the client TLS certificate.
# If not set, the server General.TLS.PrivateKey is re-used.
ClientPrivateKey: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/tls/server.key
# The below 4 properties should be either set together, or be unset together.
# If they are set, then the orderer node uses a separate listener for intra-cluster
# communication. If they are unset, then the general orderer listener is used.
# This is useful if you want to use a different TLS server certificates on the
# client-facing and the intra-cluster listeners.
# ListenPort defines the port on which the cluster listens to connections.
ListenPort:
# ListenAddress defines the IP on which to listen to intra-cluster communication.
ListenAddress:
# ServerCertificate defines the file location of the server TLS certificate used for intra-cluster
# communication.
ServerCertificate:
# ServerPrivateKey defines the file location of the private key of the TLS certificate.
ServerPrivateKey:
# Bootstrap method: The method by which to obtain the bootstrap block
# system channel is specified. The option can be one of:
# "file" - path to a file containing the genesis block or config block of system channel
# "none" - allows an orderer to start without a system channel configuration
BootstrapMethod: file
# Bootstrap file: The file containing the bootstrap block to use when
# initializing the orderer system channel and BootstrapMethod is set to
# "file". The bootstrap file can be the genesis block, and it can also be
# a config block for late bootstrap of some consensus methods like Raft.
# Generate a genesis block by updating $FABRIC_CFG_PATH/configtx.yaml and
# using configtxgen command with "-outputBlock" option.
# Defaults to file "genesisblock" (in $FABRIC_CFG_PATH directory) if not specified.
# 需要修改5,指向order节点创世区块目录
BootstrapFile: /fabric/3orderer-org1-2peer-org2-2peer-network/channel-artifacts/orderer.genesis.block
# LocalMSPDir is where to find the private crypto material needed by the
# orderer. It is set relative here as a default for dev environments but
# should be changed to the real location in production.
#需要修改6,指定MSP目录的位置
LocalMSPDir: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/msp
# LocalMSPID is the identity to register the local MSP material with the MSP
# manager. IMPORTANT: The local MSP ID of an orderer needs to match the MSP
# ID of one of the organizations defined in the orderer system channel's
# /Channel/Orderer configuration. The sample organization defined in the
# sample configuration provided has an MSP ID of "SampleOrg".
#需要修改7,指定之前创建时的MSPID
LocalMSPID: OrdererMSP
# Enable an HTTP service for Go "pprof" profiling as documented at:
# https://golang.org/pkg/net/http/pprof
Profile:
Enabled: false
Address: 0.0.0.0:6060
# BCCSP configures the blockchain crypto service providers.
BCCSP:
# Default specifies the preferred blockchain crypto service provider
# to use. If the preferred provider is not available, the software
# based provider ("SW") will be used.
# Valid providers are:
# - SW: a software based crypto provider
# - PKCS11: a CA hardware security module crypto provider.
Default: SW
# SW configures the software based blockchain crypto provider.
SW:
# TODO: The default Hash and Security level needs refactoring to be
# fully configurable. Changing these defaults requires coordination
# SHA2 is hardcoded in several places, not only BCCSP
Hash: SHA2
Security: 256
# Location of key store. If this is unset, a location will be
# chosen using: 'LocalMSPDir'/keystore
FileKeyStore:
KeyStore:
# Settings for the PKCS#11 crypto provider (i.e. when DEFAULT: PKCS11)
PKCS11:
# Location of the PKCS11 module library
Library:
# Token Label
Label:
# User PIN
Pin:
Hash:
Security:
FileKeyStore:
KeyStore:
# Authentication contains configuration parameters related to authenticating
# client messages
Authentication:
# the acceptable difference between the current server time and the
# client's time as specified in a client request message
TimeWindow: 15m
################################################################################
#
# SECTION: File Ledger
#
# - This section applies to the configuration of the file ledger.
#
################################################################################
# 需要修改7,本次是在一台机子上模拟,因此需要修改成为0,1,2
FileLedger:
# Location: The directory to store the blocks in.
Location: /var/hyperledger/production/orderer0
################################################################################
#
# SECTION: Kafka
#
# - This section applies to the configuration of the Kafka-based orderer, and
# its interaction with the Kafka cluster.
#
################################################################################
Kafka:
# Retry: What do if a connection to the Kafka cluster cannot be established,
# or if a metadata request to the Kafka cluster needs to be repeated.
Retry:
# When a new channel is created, or when an existing channel is reloaded
# (in case of a just-restarted orderer), the orderer interacts with the
# Kafka cluster in the following ways:
# 1. It creates a Kafka producer (writer) for the Kafka partition that
# corresponds to the channel.
# 2. It uses that producer to post a no-op CONNECT message to that
# partition
# 3. It creates a Kafka consumer (reader) for that partition.
# If any of these steps fail, they will be re-attempted every
# <ShortInterval> for a total of <ShortTotal>, and then every
# <LongInterval> for a total of <LongTotal> until they succeed.
# Note that the orderer will be unable to write to or read from a
# channel until all of the steps above have been completed successfully.
ShortInterval: 5s
ShortTotal: 10m
LongInterval: 5m
LongTotal: 12h
# Affects the socket timeouts when waiting for an initial connection, a
# response, or a transmission. See Config.Net for more info:
# https://godoc.org/github.com/Shopify/sarama#Config
NetworkTimeouts:
DialTimeout: 10s
ReadTimeout: 10s
WriteTimeout: 10s
# Affects the metadata requests when the Kafka cluster is in the middle
# of a leader election.See Config.Metadata for more info:
# https://godoc.org/github.com/Shopify/sarama#Config
Metadata:
RetryBackoff: 250ms
RetryMax: 3
# What to do if posting a message to the Kafka cluster fails. See
# Config.Producer for more info:
# https://godoc.org/github.com/Shopify/sarama#Config
Producer:
RetryBackoff: 100ms
RetryMax: 3
# What to do if reading from the Kafka cluster fails. See
# Config.Consumer for more info:
# https://godoc.org/github.com/Shopify/sarama#Config
Consumer:
RetryBackoff: 2s
# Settings to use when creating Kafka topics. Only applies when
# Kafka.Version is v0.10.1.0 or higher
Topic:
# The number of Kafka brokers across which to replicate the topic
ReplicationFactor: 3
# Verbose: Enable logging for interactions with the Kafka cluster.
Verbose: false
# TLS: TLS settings for the orderer's connection to the Kafka cluster.
TLS:
# Enabled: Use TLS when connecting to the Kafka cluster.
Enabled: false
# PrivateKey: PEM-encoded private key the orderer will use for
# authentication.
PrivateKey:
# As an alternative to specifying the PrivateKey here, uncomment the
# following "File" key and specify the file name from which to load the
# value of PrivateKey.
#File: path/to/PrivateKey
# Certificate: PEM-encoded signed public key certificate the orderer will
# use for authentication.
Certificate:
# As an alternative to specifying the Certificate here, uncomment the
# following "File" key and specify the file name from which to load the
# value of Certificate.
#File: path/to/Certificate
# RootCAs: PEM-encoded trusted root certificates used to validate
# certificates from the Kafka cluster.
RootCAs:
# As an alternative to specifying the RootCAs here, uncomment the
# following "File" key and specify the file name from which to load the
# value of RootCAs.
#File: path/to/RootCAs
# SASLPlain: Settings for using SASL/PLAIN authentication with Kafka brokers
SASLPlain:
# Enabled: Use SASL/PLAIN to authenticate with Kafka brokers
Enabled: false
# User: Required when Enabled is set to true
User:
# Password: Required when Enabled is set to true
Password:
# Kafka protocol version used to communicate with the Kafka cluster brokers
# (defaults to 0.10.2.0 if not specified)
Version:
################################################################################
#
# Debug Configuration
#
# - This controls the debugging options for the orderer
#
################################################################################
Debug:
# BroadcastTraceDir when set will cause each request to the Broadcast service
# for this orderer to be written to a file in this directory
BroadcastTraceDir:
# DeliverTraceDir when set will cause each request to the Deliver service
# for this orderer to be written to a file in this directory
DeliverTraceDir:
################################################################################
#
# Operations Configuration
#
# - This configures the operations server endpoint for the orderer
#
################################################################################
Operations:
# host and port for the operations server
# 需要修改8,按照之前规定的进行修改orderer0是8443
ListenAddress: 127.0.0.1:8443
# TLS configuration for the operations endpoint
TLS:
# TLS enabled
Enabled: false
# Certificate is the location of the PEM encoded TLS certificate
Certificate:
# PrivateKey points to the location of the PEM-encoded key
PrivateKey:
# Most operations service endpoints require client authentication when TLS
# is enabled. ClientAuthRequired requires client certificate authentication
# at the TLS layer to access all resources.
ClientAuthRequired: false
# Paths to PEM encoded ca certificates to trust for client authentication
ClientRootCAs: []
################################################################################
#
# Metrics Configuration
#
# - This configures metrics collection for the orderer
#
################################################################################
Metrics:
# The metrics provider is one of statsd, prometheus, or disabled
Provider: disabled
# The statsd configuration
Statsd:
# network type: tcp or udp
Network: udp
# the statsd server address
Address: 127.0.0.1:8125
# The interval at which locally cached counters and gauges are pushed
# to statsd; timings are pushed immediately
WriteInterval: 30s
# The prefix is prepended to all emitted statsd metrics
Prefix:
################################################################################
#
# Admin Configuration
#
# - This configures the admin server endpoint for the orderer
#
################################################################################
Admin:
# host and port for the admin server
# 需要修改9,按照之前规定的进行修改orderer0是9443
ListenAddress: 127.0.0.1:9443
# TLS configuration for the admin endpoint
TLS:
# TLS enabled
Enabled: false
# Certificate is the location of the PEM encoded TLS certificate
Certificate:
# PrivateKey points to the location of the PEM-encoded key
PrivateKey:
# Most admin service endpoints require client authentication when TLS
# is enabled. ClientAuthRequired requires client certificate authentication
# at the TLS layer to access all resources.
#
# NOTE: When TLS is enabled, the admin endpoint requires mutual TLS. The
# orderer will panic on startup if this value is set to false.
ClientAuthRequired: true
# Paths to PEM encoded ca certificates to trust for client authentication
ClientRootCAs: []
################################################################################
#
# Channel participation API Configuration
#
# - This provides the channel participation API configuration for the orderer.
# - Channel participation uses the ListenAddress and TLS settings of the Admin
# service.
#
################################################################################
ChannelParticipation:
# Channel participation API is enabled.
Enabled: false
# The maximum size of the request body when joining a channel.
MaxRequestBodySize: 1 MB
################################################################################
#
# Consensus Configuration
#
# - This section contains config options for a consensus plugin. It is opaque
# to orderer, and completely up to consensus implementation to make use of.
#
################################################################################
Consensus:
# The allowed key-value pairs here depend on consensus plugin. For etcd/raft,
# we use following options:
# WALDir specifies the location at which Write Ahead Logs for etcd/raft are
# stored. Each channel will have its own subdir named after channel ID.
# 需要修改10,orderer改为orderer0或1或2
WALDir: /var/hyperledger/production/orderer0/etcdraft/wal
# SnapDir specifies the location at which snapshots for etcd/raft are
# stored. Each channel will have its own subdir named after channel ID.
# 需要修改11,orderer改为orderer0或1或2
SnapDir: /var/hyperledger/production/orderer0/etcdraft/snapshot
#大概共11出修改
- 启动orderer0节点
nohup ./orderer start > orderer0-log.log 2>&1 &
- 通过查看日志,看看是否启动成功
tail -f orderer0-log.log
部署peer节点
一、配置网络地址
节点 | 宿主机 IP | hosts | 端口 |
---|---|---|---|
cli | 127.0.0.1 | N/A | N/A |
orderer0 | 127.0.0.1 | orderer0.example.com | 7050 , 8443 , 9443 |
orderer1 | 127.0.0.1 | orderer1.example.com | 8050 , 8444 ,9444 |
orderer2 | 127.0.0.1 | orderer2.example.com | 9050 , 8445 ,9445 |
org1-peer0 | 127.0.0.1 | peer0.org1.example.com | 7051 , 7052 , 9446 , 8125 |
org1-peer1 | 127.0.0.1 | peer1.org1.example.com | 8051 , 7053 , 9447 , 8126 |
org2-peer0 | 127.0.0.1 | peer0.org2.example.com | 9051 , 7054 , 9448 , 8127 |
org2-peer1 | 127.0.0.1 | peer1.org2.example.com | 10051 , 7055 , 9449 , 8128 |
vim /etc/hosts
# 新增
127.0.0.1 orderer0.example.com
127.0.0.1 orderer1.example.com
127.0.0.1 orderer2.example.com
127.0.0.1 peer0.org1.example.com
127.0.0.1 peer1.org1.example.com
127.0.0.1 peer0.org2.example.com
127.0.0.1 peer1.org2.example.com
-
在配置之前,需要保证order节点是启动的状态,查看order节点是否启动的命令
ps -aux |grep orderer
如果没有启动,则使用以下命令,启动对应的三个order节点
nohup ./orderer start > orderer0-log.log 2>&1 &
-
启动org1两个节点,回到项目根目录
mkdir org1-peer cd org1-peer mkdir peer0
-
拷贝bin目录下peer文件到新建的peer0文件夹中
cp ../../bin/peer $PWD
-
拷贝一份core.yaml文件进行修改
# Copyright IBM Corp. All Rights Reserved. # # SPDX-License-Identifier: Apache-2.0 # ############################################################################### # # Peer section # ############################################################################### peer: # The peer id provides a name for this peer instance and is used when # naming docker resources. id: peer0.org1.example.com # The networkId allows for logical separation of networks and is used when # naming docker resources. networkId: dev # The Address at local network interface this Peer will listen on. # By default, it will listen on all network interfaces listenAddress: 127.0.0.1:7051 # The endpoint this peer uses to listen for inbound chaincode connections. # If this is commented-out, the listen address is selected to be # the peer's address (see below) with port 7052 chaincodeListenAddress: 127.0.0.1:7052 # The endpoint the chaincode for this peer uses to connect to the peer. # If this is not specified, the chaincodeListenAddress address is selected. # And if chaincodeListenAddress is not specified, address is selected from # peer address (see below). If specified peer address is invalid then it # will fallback to the auto detected IP (local IP) regardless of the peer # addressAutoDetect value. chaincodeAddress: 127.0.0.1:7052 # When used as peer config, this represents the endpoint to other peers # in the same organization. For peers in other organization, see # gossip.externalEndpoint for more info. # When used as CLI config, this means the peer's endpoint to interact with address: 127.0.0.1:7051 # Whether the Peer should programmatically determine its address # This case is useful for docker containers. # When set to true, will override peer address. addressAutoDetect: false # Settings for the Peer's gateway server. gateway: # Whether the gateway is enabled for this Peer. enabled: true # endorsementTimeout is the duration the gateway waits for a response # from other endorsing peers before returning a timeout error to the client. endorsementTimeout: 30s # dialTimeout is the duration the gateway waits for a connection # to other network nodes. dialTimeout: 2m # Keepalive settings for peer server and clients keepalive: # Interval is the duration after which if the server does not see # any activity from the client it pings the client to see if it's alive interval: 7200s # Timeout is the duration the server waits for a response # from the client after sending a ping before closing the connection timeout: 20s # MinInterval is the minimum permitted time between client pings. # If clients send pings more frequently, the peer server will # disconnect them minInterval: 60s # Client keepalive settings for communicating with other peer nodes client: # Interval is the time between pings to peer nodes. This must # greater than or equal to the minInterval specified by peer # nodes interval: 60s # Timeout is the duration the client waits for a response from # peer nodes before closing the connection timeout: 20s # DeliveryClient keepalive settings for communication with ordering # nodes. deliveryClient: # Interval is the time between pings to ordering nodes. This must # greater than or equal to the minInterval specified by ordering # nodes. interval: 60s # Timeout is the duration the client waits for a response from # ordering nodes before closing the connection timeout: 20s # Gossip related configuration gossip: # Bootstrap set to initialize gossip with. # This is a list of other peers that this peer reaches out to at startup. # Important: The endpoints here have to be endpoints of peers in the same # organization, because the peer would refuse connecting to these endpoints # unless they are in the same organization as the peer. bootstrap: 127.0.0.1:7051 # NOTE: orgLeader and useLeaderElection parameters are mutual exclusive. # Setting both to true would result in the termination of the peer # since this is undefined state. If the peers are configured with # useLeaderElection=false, make sure there is at least 1 peer in the # organization that its orgLeader is set to true. # Defines whenever peer will initialize dynamic algorithm for # "leader" selection, where leader is the peer to establish # connection with ordering service and use delivery protocol # to pull ledger blocks from ordering service. useLeaderElection: false # Statically defines peer to be an organization "leader", # where this means that current peer will maintain connection # with ordering service and disseminate block across peers in # its own organization. Multiple peers or all peers in an organization # may be configured as org leaders, so that they all pull # blocks directly from ordering service. orgLeader: true # Interval for membershipTracker polling membershipTrackerInterval: 5s # Overrides the endpoint that the peer publishes to peers # in its organization. For peers in foreign organizations # see 'externalEndpoint' endpoint: # Maximum count of blocks stored in memory maxBlockCountToStore: 10 # Max time between consecutive message pushes(unit: millisecond) maxPropagationBurstLatency: 10ms # Max number of messages stored until a push is triggered to remote peers maxPropagationBurstSize: 10 # Number of times a message is pushed to remote peers propagateIterations: 1 # Number of peers selected to push messages to propagatePeerNum: 3 # Determines frequency of pull phases(unit: second) # Must be greater than digestWaitTime + responseWaitTime pullInterval: 4s # Number of peers to pull from pullPeerNum: 3 # Determines frequency of pulling state info messages from peers(unit: second) requestStateInfoInterval: 4s # Determines frequency of pushing state info messages to peers(unit: second) publishStateInfoInterval: 4s # Maximum time a stateInfo message is kept until expired stateInfoRetentionInterval: # Time from startup certificates are included in Alive messages(unit: second) publishCertPeriod: 10s # Should we skip verifying block messages or not (currently not in use) skipBlockVerification: false # Dial timeout(unit: second) dialTimeout: 3s # Connection timeout(unit: second) connTimeout: 2s # Buffer size of received messages recvBuffSize: 20 # Buffer size of sending messages sendBuffSize: 200 # Time to wait before pull engine processes incoming digests (unit: second) # Should be slightly smaller than requestWaitTime digestWaitTime: 1s # Time to wait before pull engine removes incoming nonce (unit: milliseconds) # Should be slightly bigger than digestWaitTime requestWaitTime: 1500ms # Time to wait before pull engine ends pull (unit: second) responseWaitTime: 2s # Alive check interval(unit: second) aliveTimeInterval: 5s # Alive expiration timeout(unit: second) aliveExpirationTimeout: 25s # Reconnect interval(unit: second) reconnectInterval: 25s # Max number of attempts to connect to a peer maxConnectionAttempts: 120 # Message expiration factor for alive messages msgExpirationFactor: 20 # This is an endpoint that is published to peers outside of the organization. # If this isn't set, the peer will not be known to other organizations. externalEndpoint: # Leader election service configuration election: # Longest time peer waits for stable membership during leader election startup (unit: second) startupGracePeriod: 15s # Interval gossip membership samples to check its stability (unit: second) membershipSampleInterval: 1s # Time passes since last declaration message before peer decides to perform leader election (unit: second) leaderAliveThreshold: 10s # Time between peer sends propose message and declares itself as a leader (sends declaration message) (unit: second) leaderElectionDuration: 5s pvtData: # pullRetryThreshold determines the maximum duration of time private data corresponding for a given block # would be attempted to be pulled from peers until the block would be committed without the private data pullRetryThreshold: 60s # As private data enters the transient store, it is associated with the peer's ledger's height at that time. # transientstoreMaxBlockRetention defines the maximum difference between the current ledger's height upon commit, # and the private data residing inside the transient store that is guaranteed not to be purged. # Private data is purged from the transient store when blocks with sequences that are multiples # of transientstoreMaxBlockRetention are committed. transientstoreMaxBlockRetention: 1000 # pushAckTimeout is the maximum time to wait for an acknowledgement from each peer # at private data push at endorsement time. pushAckTimeout: 3s # Block to live pulling margin, used as a buffer # to prevent peer from trying to pull private data # from peers that is soon to be purged in next N blocks. # This helps a newly joined peer catch up to current # blockchain height quicker. btlPullMargin: 10 # the process of reconciliation is done in an endless loop, while in each iteration reconciler tries to # pull from the other peers the most recent missing blocks with a maximum batch size limitation. # reconcileBatchSize determines the maximum batch size of missing private data that will be reconciled in a # single iteration. reconcileBatchSize: 10 # reconcileSleepInterval determines the time reconciler sleeps from end of an iteration until the beginning # of the next reconciliation iteration. reconcileSleepInterval: 1m # reconciliationEnabled is a flag that indicates whether private data reconciliation is enable or not. reconciliationEnabled: true # skipPullingInvalidTransactionsDuringCommit is a flag that indicates whether pulling of invalid # transaction's private data from other peers need to be skipped during the commit time and pulled # only through reconciler. skipPullingInvalidTransactionsDuringCommit: false # implicitCollectionDisseminationPolicy specifies the dissemination policy for the peer's own implicit collection. # When a peer endorses a proposal that writes to its own implicit collection, below values override the default values # for disseminating private data. # Note that it is applicable to all channels the peer has joined. The implication is that requiredPeerCount has to # be smaller than the number of peers in a channel that has the lowest numbers of peers from the organization. implicitCollectionDisseminationPolicy: # requiredPeerCount defines the minimum number of eligible peers to which the peer must successfully # disseminate private data for its own implicit collection during endorsement. Default value is 0. requiredPeerCount: 0 # maxPeerCount defines the maximum number of eligible peers to which the peer will attempt to # disseminate private data for its own implicit collection during endorsement. Default value is 1. maxPeerCount: 1 # Gossip state transfer related configuration state: # indicates whenever state transfer is enabled or not # default value is false, i.e. state transfer is active # and takes care to sync up missing blocks allowing # lagging peer to catch up to speed with rest network. # Keep in mind that when peer.gossip.useLeaderElection is true # and there are several peers in the organization, # or peer.gossip.useLeaderElection is false alongside with # peer.gossip.orgleader being false, the peer's ledger may lag behind # the rest of the peers and will never catch up due to state transfer # being disabled. enabled: false # checkInterval interval to check whether peer is lagging behind enough to # request blocks via state transfer from another peer. checkInterval: 10s # responseTimeout amount of time to wait for state transfer response from # other peers responseTimeout: 3s # batchSize the number of blocks to request via state transfer from another peer batchSize: 10 # blockBufferSize reflects the size of the re-ordering buffer # which captures blocks and takes care to deliver them in order # down to the ledger layer. The actual buffer size is bounded between # 0 and 2*blockBufferSize, each channel maintains its own buffer blockBufferSize: 20 # maxRetries maximum number of re-tries to ask # for single state transfer request maxRetries: 3 # TLS Settings tls: # Require server-side TLS enabled: true # Require client certificates / mutual TLS for inbound connections. # Note that clients that are not configured to use a certificate will # fail to connect to the peer. clientAuthRequired: false # X.509 certificate used for TLS server cert: file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt # Private key used for TLS server key: file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key # rootcert.file represents the trusted root certificate chain used for verifying certificates # of other nodes during outbound connections. # It is not required to be set, but can be used to augment the set of TLS CA certificates # available from the MSPs of each channel’s configuration. rootcert: file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt # If mutual TLS is enabled, clientRootCAs.files contains a list of additional root certificates # used for verifying certificates of client connections. # It augments the set of TLS CA certificates available from the MSPs of each channel’s configuration. # Minimally, set your organization's TLS CA root certificate so that the peer can receive join channel requests. clientRootCAs: files: - /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt # Private key used for TLS when making client connections. # If not set, peer.tls.key.file will be used instead clientKey: file: # X.509 certificate used for TLS when making client connections. # If not set, peer.tls.cert.file will be used instead clientCert: file: # Authentication contains configuration parameters related to authenticating # client messages authentication: # the acceptable difference between the current server time and the # client's time as specified in a client request message timewindow: 15m # Path on the file system where peer will store data (eg ledger). This # location must be access control protected to prevent unintended # modification that might corrupt the peer operations. fileSystemPath: /var/hyperledger/production/org1-peer0 # BCCSP (Blockchain crypto provider): Select which crypto implementation or # library to use BCCSP: Default: SW # Settings for the SW crypto provider (i.e. when DEFAULT: SW) SW: # TODO: The default Hash and Security level needs refactoring to be # fully configurable. Changing these defaults requires coordination # SHA2 is hardcoded in several places, not only BCCSP Hash: SHA2 Security: 256 # Location of Key Store FileKeyStore: # If "", defaults to 'mspConfigPath'/keystore KeyStore: # Settings for the PKCS#11 crypto provider (i.e. when DEFAULT: PKCS11) PKCS11: # Location of the PKCS11 module library Library: # Token Label Label: # User PIN Pin: Hash: Security: # Path on the file system where peer will find MSP local configurations mspConfigPath: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp # Identifier of the local MSP # ----!!!!IMPORTANT!!!-!!!IMPORTANT!!!-!!!IMPORTANT!!!!---- # Deployers need to change the value of the localMspId string. # In particular, the name of the local MSP ID of a peer needs # to match the name of one of the MSPs in each of the channel # that this peer is a member of. Otherwise this peer's messages # will not be identified as valid by other nodes. localMspId: Org1MSP # CLI common client config options client: # connection timeout connTimeout: 3s # Delivery service related config deliveryclient: # Enables this peer to disseminate blocks it pulled from the ordering service # via gossip. # Note that 'gossip.state.enabled' controls point to point block replication # of blocks committed in the past. blockGossipEnabled: true # It sets the total time the delivery service may spend in reconnection # attempts until its retry logic gives up and returns an error reconnectTotalTimeThreshold: 3600s # It sets the delivery service <-> ordering service node connection timeout connTimeout: 3s # It sets the delivery service maximal delay between consecutive retries reConnectBackoffThreshold: 3600s # A list of orderer endpoint addresses which should be overridden # when found in channel configurations. addressOverrides: # - from: # to: # caCertsFile: # - from: # to: # caCertsFile: # Type for the local MSP - by default it's of type bccsp localMspType: bccsp # Used with Go profiling tools only in none production environment. In # production, it should be disabled (eg enabled: false) profile: enabled: false listenAddress: 0.0.0.0:6060 # Handlers defines custom handlers that can filter and mutate # objects passing within the peer, such as: # Auth filter - reject or forward proposals from clients # Decorators - append or mutate the chaincode input passed to the chaincode # Endorsers - Custom signing over proposal response payload and its mutation # Valid handler definition contains: # - A name which is a factory method name defined in # core/handlers/library/library.go for statically compiled handlers # - library path to shared object binary for pluggable filters # Auth filters and decorators are chained and executed in the order that # they are defined. For example: # authFilters: # - # name: FilterOne # library: /opt/lib/filter.so # - # name: FilterTwo # decorators: # - # name: DecoratorOne # - # name: DecoratorTwo # library: /opt/lib/decorator.so # Endorsers are configured as a map that its keys are the endorsement system chaincodes that are being overridden. # Below is an example that overrides the default ESCC and uses an endorsement plugin that has the same functionality # as the default ESCC. # If the 'library' property is missing, the name is used as the constructor method in the builtin library similar # to auth filters and decorators. # endorsers: # escc: # name: DefaultESCC # library: /etc/hyperledger/fabric/plugin/escc.so handlers: authFilters: - name: DefaultAuth - name: ExpirationCheck # This filter checks identity x509 certificate expiration decorators: - name: DefaultDecorator endorsers: escc: name: DefaultEndorsement library: validators: vscc: name: DefaultValidation library: # library: /etc/hyperledger/fabric/plugin/escc.so # Number of goroutines that will execute transaction validation in parallel. # By default, the peer chooses the number of CPUs on the machine. Set this # variable to override that choice. # NOTE: overriding this value might negatively influence the performance of # the peer so please change this value only if you know what you're doing validatorPoolSize: # The discovery service is used by clients to query information about peers, # such as - which peers have joined a certain channel, what is the latest # channel config, and most importantly - given a chaincode and a channel, # what possible sets of peers satisfy the endorsement policy. discovery: enabled: true # Whether the authentication cache is enabled or not. authCacheEnabled: true # The maximum size of the cache, after which a purge takes place authCacheMaxSize: 1000 # The proportion (0 to 1) of entries that remain in the cache after the cache is purged due to overpopulation authCachePurgeRetentionRatio: 0.75 # Whether to allow non-admins to perform non channel scoped queries. # When this is false, it means that only peer admins can perform non channel scoped queries. orgMembersAllowedAccess: false # Limits is used to configure some internal resource limits. limits: # Concurrency limits the number of concurrently running requests to a service on each peer. # Currently this option is only applied to endorser service and deliver service. # When the property is missing or the value is 0, the concurrency limit is disabled for the service. concurrency: # endorserService limits concurrent requests to endorser service that handles chaincode deployment, query and invocation, # including both user chaincodes and system chaincodes. endorserService: 2500 # deliverService limits concurrent event listeners registered to deliver service for blocks and transaction events. deliverService: 2500 # gatewayService limits concurrent requests to gateway service that handles the submission and evaluation of transactions. gatewayService: 500 # Since all nodes should be consistent it is recommended to keep # the default value of 100MB for MaxRecvMsgSize & MaxSendMsgSize # Max message size in bytes GRPC server and client can receive maxRecvMsgSize: 104857600 # Max message size in bytes GRPC server and client can send maxSendMsgSize: 104857600 ############################################################################### # # VM section # ############################################################################### vm: # Endpoint of the vm management system. For docker can be one of the following in general # unix:///var/run/docker.sock # http://localhost:2375 # https://localhost:2376 # If you utilize external chaincode builders and don't need the default Docker chaincode builder, # the endpoint should be unconfigured so that the peer's Docker health checker doesn't get registered. endpoint: unix:///var/run/docker.sock # settings for docker vms docker: tls: enabled: false ca: file: docker/ca.crt cert: file: docker/tls.crt key: file: docker/tls.key # Enables/disables the standard out/err from chaincode containers for # debugging purposes attachStdout: false # Parameters on creating docker container. # Container may be efficiently created using ipam & dns-server for cluster # NetworkMode - sets the networking mode for the container. Supported # standard values are: `host`(default),`bridge`,`ipvlan`,`none`. # Dns - a list of DNS servers for the container to use. # Note: `Privileged` `Binds` `Links` and `PortBindings` properties of # Docker Host Config are not supported and will not be used if set. # LogConfig - sets the logging driver (Type) and related options # (Config) for Docker. For more info, # https://docs.docker.com/engine/admin/logging/overview/ # Note: Set LogConfig using Environment Variables is not supported. hostConfig: NetworkMode: host Dns: # - 192.168.0.1 LogConfig: Type: json-file Config: max-size: "50m" max-file: "5" Memory: 2147483648 ############################################################################### # # Chaincode section # ############################################################################### chaincode: # The id is used by the Chaincode stub to register the executing Chaincode # ID with the Peer and is generally supplied through ENV variables # the `path` form of ID is provided when installing the chaincode. # The `name` is used for all other requests and can be any string. id: path: name: # Generic builder environment, suitable for most chaincode types builder: $(DOCKER_NS)/fabric-ccenv:$(TWO_DIGIT_VERSION) # Enables/disables force pulling of the base docker images (listed below) # during user chaincode instantiation. # Useful when using moving image tags (such as :latest) pull: false golang: # golang will never need more than baseos runtime: $(DOCKER_NS)/fabric-baseos:$(TWO_DIGIT_VERSION) # whether or not golang chaincode should be linked dynamically dynamicLink: false java: # This is an image based on java:openjdk-8 with addition compiler # tools added for java shim layer packaging. # This image is packed with shim layer libraries that are necessary # for Java chaincode runtime. runtime: $(DOCKER_NS)/fabric-javaenv:$(TWO_DIGIT_VERSION) node: # This is an image based on node:$(NODE_VER)-alpine runtime: $(DOCKER_NS)/fabric-nodeenv:$(TWO_DIGIT_VERSION) # List of directories to treat as external builders and launchers for # chaincode. The external builder detection processing will iterate over the # builders in the order specified below. # If you don't need to fallback to the default Docker builder, also unconfigure vm.endpoint above. # To override this property via env variable use CORE_CHAINCODE_EXTERNALBUILDERS: [{name: x, path: dir1}, {name: y, path: dir2}] externalBuilders: - name: ccaas_builder path: /opt/hyperledger/ccaas_builder propagateEnvironment: - CHAINCODE_AS_A_SERVICE_BUILDER_CONFIG # The maximum duration to wait for the chaincode build and install process # to complete. installTimeout: 300s # Timeout duration for starting up a container and waiting for Register # to come through. startuptimeout: 300s # Timeout duration for Invoke and Init calls to prevent runaway. # This timeout is used by all chaincodes in all the channels, including # system chaincodes. # Note that during Invoke, if the image is not available (e.g. being # cleaned up when in development environment), the peer will automatically # build the image, which might take more time. In production environment, # the chaincode image is unlikely to be deleted, so the timeout could be # reduced accordingly. executetimeout: 30s # There are 2 modes: "dev" and "net". # In dev mode, user runs the chaincode after starting peer from # command line on local machine. # In net mode, peer will run chaincode in a docker container. mode: net # keepalive in seconds. In situations where the communication goes through a # proxy that does not support keep-alive, this parameter will maintain connection # between peer and chaincode. # A value <= 0 turns keepalive off keepalive: 0 # enabled system chaincodes system: _lifecycle: enable cscc: enable lscc: enable qscc: enable # Logging section for the chaincode container logging: # Default level for all loggers within the chaincode container level: info # Override default level for the 'shim' logger shim: warning # Format for the chaincode container logs format: '%{color}%{time:2006-01-02 15:04:05.000 MST} [%{module}] %{shortfunc} -> %{level:.4s} %{id:03x}%{color:reset} %{message}' ############################################################################### # # Ledger section - ledger configuration encompasses both the blockchain # and the state # ############################################################################### ledger: blockchain: state: # stateDatabase - options are "goleveldb", "CouchDB" # goleveldb - default state database stored in goleveldb. # CouchDB - store state database in CouchDB stateDatabase: goleveldb # Limit on the number of records to return per query totalQueryLimit: 100000 couchDBConfig: # It is recommended to run CouchDB on the same server as the peer, and # not map the CouchDB container port to a server port in docker-compose. # Otherwise proper security must be provided on the connection between # CouchDB client (on the peer) and server. couchDBAddress: 127.0.0.1:5984 # This username must have read and write authority on CouchDB username: # The password is recommended to pass as an environment variable # during start up (eg CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD). # If it is stored here, the file must be access control protected # to prevent unintended users from discovering the password. password: # Number of retries for CouchDB errors maxRetries: 3 # Number of retries for CouchDB errors during peer startup. # The delay between retries doubles for each attempt. # Default of 10 retries results in 11 attempts over 2 minutes. maxRetriesOnStartup: 10 # CouchDB request timeout (unit: duration, e.g. 20s) requestTimeout: 35s # Limit on the number of records per each CouchDB query # Note that chaincode queries are only bound by totalQueryLimit. # Internally the chaincode may execute multiple CouchDB queries, # each of size internalQueryLimit. internalQueryLimit: 1000 # Limit on the number of records per CouchDB bulk update batch maxBatchUpdateSize: 1000 # Create the _global_changes system database # This is optional. Creating the global changes database will require # additional system resources to track changes and maintain the database createGlobalChangesDB: false # CacheSize denotes the maximum mega bytes (MB) to be allocated for the in-memory state # cache. Note that CacheSize needs to be a multiple of 32 MB. If it is not a multiple # of 32 MB, the peer would round the size to the next multiple of 32 MB. # To disable the cache, 0 MB needs to be assigned to the cacheSize. cacheSize: 64 history: # enableHistoryDatabase - options are true or false # Indicates if the history of key updates should be stored. # All history 'index' will be stored in goleveldb, regardless if using # CouchDB or alternate database for the state. enableHistoryDatabase: true pvtdataStore: # the maximum db batch size for converting # the ineligible missing data entries to eligible missing data entries collElgProcMaxDbBatchSize: 5000 # the minimum duration (in milliseconds) between writing # two consecutive db batches for converting the ineligible missing data entries to eligible missing data entries collElgProcDbBatchesInterval: 1000 # The missing data entries are classified into two categories: # (1) prioritized # (2) deprioritized # Initially, all missing data are in the prioritized list. When the # reconciler is unable to fetch the missing data from other peers, # the unreconciled missing data would be moved to the deprioritized list. # The reconciler would retry deprioritized missing data after every # deprioritizedDataReconcilerInterval (unit: minutes). Note that the # interval needs to be greater than the reconcileSleepInterval deprioritizedDataReconcilerInterval: 60m snapshots: # Path on the file system where peer will store ledger snapshots rootDir: /var/hyperledger/production/snapshots/org1-peer0 ############################################################################### # # Operations section # ############################################################################### operations: # host and port for the operations server listenAddress: 127.0.0.1:9446 # TLS configuration for the operations endpoint tls: # TLS enabled enabled: false # path to PEM encoded server certificate for the operations server cert: file: # path to PEM encoded server key for the operations server key: file: # most operations service endpoints require client authentication when TLS # is enabled. clientAuthRequired requires client certificate authentication # at the TLS layer to access all resources. clientAuthRequired: false # paths to PEM encoded ca certificates to trust for client authentication clientRootCAs: files: [] ############################################################################### # # Metrics section # ############################################################################### metrics: # metrics provider is one of statsd, prometheus, or disabled provider: disabled # statsd configuration statsd: # network type: tcp or udp network: udp # statsd server address address: 127.0.0.1:8125 # the interval at which locally cached counters and gauges are pushed # to statsd; timings are pushed immediately writeInterval: 10s # prefix is prepended to all emitted statsd metrics prefix:
-
修改完成以后启动
nohup ./peer node start > org1-peer0.log 2>&1 &
-
查看peer是否启动成功
tail -f org1-peer0.log
-
重复启动其余3个节点
-
其余各节点的core.yaml记录
peer1-org1
# Copyright IBM Corp. All Rights Reserved. # # SPDX-License-Identifier: Apache-2.0 # ############################################################################### # # Peer section # ############################################################################### peer: # The peer id provides a name for this peer instance and is used when # naming docker resources. id: peer1.org1.example.com # The networkId allows for logical separation of networks and is used when # naming docker resources. networkId: dev # The Address at local network interface this Peer will listen on. # By default, it will listen on all network interfaces listenAddress: 127.0.0.1:8051 # The endpoint this peer uses to listen for inbound chaincode connections. # If this is commented-out, the listen address is selected to be # the peer's address (see below) with port 7052 chaincodeListenAddress: 127.0.0.1:7053 # The endpoint the chaincode for this peer uses to connect to the peer. # If this is not specified, the chaincodeListenAddress address is selected. # And if chaincodeListenAddress is not specified, address is selected from # peer address (see below). If specified peer address is invalid then it # will fallback to the auto detected IP (local IP) regardless of the peer # addressAutoDetect value. # chaincodeAddress: 192.168.1.66:7053 # When used as peer config, this represents the endpoint to other peers # in the same organization. For peers in other organization, see # gossip.externalEndpoint for more info. # When used as CLI config, this means the peer's endpoint to interact with address: 127.0.0.1:8051 # Whether the Peer should programmatically determine its address # This case is useful for docker containers. # When set to true, will override peer address. addressAutoDetect: false # Settings for the Peer's gateway server. gateway: # Whether the gateway is enabled for this Peer. enabled: true # endorsementTimeout is the duration the gateway waits for a response # from other endorsing peers before returning a timeout error to the client. endorsementTimeout: 30s # dialTimeout is the duration the gateway waits for a connection # to other network nodes. dialTimeout: 2m # Keepalive settings for peer server and clients keepalive: # Interval is the duration after which if the server does not see # any activity from the client it pings the client to see if it's alive interval: 7200s # Timeout is the duration the server waits for a response # from the client after sending a ping before closing the connection timeout: 20s # MinInterval is the minimum permitted time between client pings. # If clients send pings more frequently, the peer server will # disconnect them minInterval: 60s # Client keepalive settings for communicating with other peer nodes client: # Interval is the time between pings to peer nodes. This must # greater than or equal to the minInterval specified by peer # nodes interval: 60s # Timeout is the duration the client waits for a response from # peer nodes before closing the connection timeout: 20s # DeliveryClient keepalive settings for communication with ordering # nodes. deliveryClient: # Interval is the time between pings to ordering nodes. This must # greater than or equal to the minInterval specified by ordering # nodes. interval: 60s # Timeout is the duration the client waits for a response from # ordering nodes before closing the connection timeout: 20s # Gossip related configuration gossip: # Bootstrap set to initialize gossip with. # This is a list of other peers that this peer reaches out to at startup. # Important: The endpoints here have to be endpoints of peers in the same # organization, because the peer would refuse connecting to these endpoints # unless they are in the same organization as the peer. bootstrap: 127.0.0.1:8051 # NOTE: orgLeader and useLeaderElection parameters are mutual exclusive. # Setting both to true would result in the termination of the peer # since this is undefined state. If the peers are configured with # useLeaderElection=false, make sure there is at least 1 peer in the # organization that its orgLeader is set to true. # Defines whenever peer will initialize dynamic algorithm for # "leader" selection, where leader is the peer to establish # connection with ordering service and use delivery protocol # to pull ledger blocks from ordering service. useLeaderElection: false # Statically defines peer to be an organization "leader", # where this means that current peer will maintain connection # with ordering service and disseminate block across peers in # its own organization. Multiple peers or all peers in an organization # may be configured as org leaders, so that they all pull # blocks directly from ordering service. orgLeader: true # Interval for membershipTracker polling membershipTrackerInterval: 5s # Overrides the endpoint that the peer publishes to peers # in its organization. For peers in foreign organizations # see 'externalEndpoint' endpoint: # Maximum count of blocks stored in memory maxBlockCountToStore: 10 # Max time between consecutive message pushes(unit: millisecond) maxPropagationBurstLatency: 10ms # Max number of messages stored until a push is triggered to remote peers maxPropagationBurstSize: 10 # Number of times a message is pushed to remote peers propagateIterations: 1 # Number of peers selected to push messages to propagatePeerNum: 3 # Determines frequency of pull phases(unit: second) # Must be greater than digestWaitTime + responseWaitTime pullInterval: 4s # Number of peers to pull from pullPeerNum: 3 # Determines frequency of pulling state info messages from peers(unit: second) requestStateInfoInterval: 4s # Determines frequency of pushing state info messages to peers(unit: second) publishStateInfoInterval: 4s # Maximum time a stateInfo message is kept until expired stateInfoRetentionInterval: # Time from startup certificates are included in Alive messages(unit: second) publishCertPeriod: 10s # Should we skip verifying block messages or not (currently not in use) skipBlockVerification: false # Dial timeout(unit: second) dialTimeout: 3s # Connection timeout(unit: second) connTimeout: 2s # Buffer size of received messages recvBuffSize: 20 # Buffer size of sending messages sendBuffSize: 200 # Time to wait before pull engine processes incoming digests (unit: second) # Should be slightly smaller than requestWaitTime digestWaitTime: 1s # Time to wait before pull engine removes incoming nonce (unit: milliseconds) # Should be slightly bigger than digestWaitTime requestWaitTime: 1500ms # Time to wait before pull engine ends pull (unit: second) responseWaitTime: 2s # Alive check interval(unit: second) aliveTimeInterval: 5s # Alive expiration timeout(unit: second) aliveExpirationTimeout: 25s # Reconnect interval(unit: second) reconnectInterval: 25s # Max number of attempts to connect to a peer maxConnectionAttempts: 120 # Message expiration factor for alive messages msgExpirationFactor: 20 # This is an endpoint that is published to peers outside of the organization. # If this isn't set, the peer will not be known to other organizations. externalEndpoint: # Leader election service configuration election: # Longest time peer waits for stable membership during leader election startup (unit: second) startupGracePeriod: 15s # Interval gossip membership samples to check its stability (unit: second) membershipSampleInterval: 1s # Time passes since last declaration message before peer decides to perform leader election (unit: second) leaderAliveThreshold: 10s # Time between peer sends propose message and declares itself as a leader (sends declaration message) (unit: second) leaderElectionDuration: 5s pvtData: # pullRetryThreshold determines the maximum duration of time private data corresponding for a given block # would be attempted to be pulled from peers until the block would be committed without the private data pullRetryThreshold: 60s # As private data enters the transient store, it is associated with the peer's ledger's height at that time. # transientstoreMaxBlockRetention defines the maximum difference between the current ledger's height upon commit, # and the private data residing inside the transient store that is guaranteed not to be purged. # Private data is purged from the transient store when blocks with sequences that are multiples # of transientstoreMaxBlockRetention are committed. transientstoreMaxBlockRetention: 1000 # pushAckTimeout is the maximum time to wait for an acknowledgement from each peer # at private data push at endorsement time. pushAckTimeout: 3s # Block to live pulling margin, used as a buffer # to prevent peer from trying to pull private data # from peers that is soon to be purged in next N blocks. # This helps a newly joined peer catch up to current # blockchain height quicker. btlPullMargin: 10 # the process of reconciliation is done in an endless loop, while in each iteration reconciler tries to # pull from the other peers the most recent missing blocks with a maximum batch size limitation. # reconcileBatchSize determines the maximum batch size of missing private data that will be reconciled in a # single iteration. reconcileBatchSize: 10 # reconcileSleepInterval determines the time reconciler sleeps from end of an iteration until the beginning # of the next reconciliation iteration. reconcileSleepInterval: 1m # reconciliationEnabled is a flag that indicates whether private data reconciliation is enable or not. reconciliationEnabled: true # skipPullingInvalidTransactionsDuringCommit is a flag that indicates whether pulling of invalid # transaction's private data from other peers need to be skipped during the commit time and pulled # only through reconciler. skipPullingInvalidTransactionsDuringCommit: false # implicitCollectionDisseminationPolicy specifies the dissemination policy for the peer's own implicit collection. # When a peer endorses a proposal that writes to its own implicit collection, below values override the default values # for disseminating private data. # Note that it is applicable to all channels the peer has joined. The implication is that requiredPeerCount has to # be smaller than the number of peers in a channel that has the lowest numbers of peers from the organization. implicitCollectionDisseminationPolicy: # requiredPeerCount defines the minimum number of eligible peers to which the peer must successfully # disseminate private data for its own implicit collection during endorsement. Default value is 0. requiredPeerCount: 0 # maxPeerCount defines the maximum number of eligible peers to which the peer will attempt to # disseminate private data for its own implicit collection during endorsement. Default value is 1. maxPeerCount: 1 # Gossip state transfer related configuration state: # indicates whenever state transfer is enabled or not # default value is false, i.e. state transfer is active # and takes care to sync up missing blocks allowing # lagging peer to catch up to speed with rest network. # Keep in mind that when peer.gossip.useLeaderElection is true # and there are several peers in the organization, # or peer.gossip.useLeaderElection is false alongside with # peer.gossip.orgleader being false, the peer's ledger may lag behind # the rest of the peers and will never catch up due to state transfer # being disabled. enabled: false # checkInterval interval to check whether peer is lagging behind enough to # request blocks via state transfer from another peer. checkInterval: 10s # responseTimeout amount of time to wait for state transfer response from # other peers responseTimeout: 3s # batchSize the number of blocks to request via state transfer from another peer batchSize: 10 # blockBufferSize reflects the size of the re-ordering buffer # which captures blocks and takes care to deliver them in order # down to the ledger layer. The actual buffer size is bounded between # 0 and 2*blockBufferSize, each channel maintains its own buffer blockBufferSize: 20 # maxRetries maximum number of re-tries to ask # for single state transfer request maxRetries: 3 # TLS Settings tls: # Require server-side TLS enabled: true # Require client certificates / mutual TLS for inbound connections. # Note that clients that are not configured to use a certificate will # fail to connect to the peer. clientAuthRequired: false # X.509 certificate used for TLS server cert: file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.crt # Private key used for TLS server key: file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/server.key # rootcert.file represents the trusted root certificate chain used for verifying certificates # of other nodes during outbound connections. # It is not required to be set, but can be used to augment the set of TLS CA certificates # available from the MSPs of each channel’s configuration. rootcert: file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt # If mutual TLS is enabled, clientRootCAs.files contains a list of additional root certificates # used for verifying certificates of client connections. # It augments the set of TLS CA certificates available from the MSPs of each channel’s configuration. # Minimally, set your organization's TLS CA root certificate so that the peer can receive join channel requests. clientRootCAs: files: - /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt # Private key used for TLS when making client connections. # If not set, peer.tls.key.file will be used instead clientKey: file: # X.509 certificate used for TLS when making client connections. # If not set, peer.tls.cert.file will be used instead clientCert: file: # Authentication contains configuration parameters related to authenticating # client messages authentication: # the acceptable difference between the current server time and the # client's time as specified in a client request message timewindow: 15m # Path on the file system where peer will store data (eg ledger). This # location must be access control protected to prevent unintended # modification that might corrupt the peer operations. fileSystemPath: /var/hyperledger/production/org1-peer1 # BCCSP (Blockchain crypto provider): Select which crypto implementation or # library to use BCCSP: Default: SW # Settings for the SW crypto provider (i.e. when DEFAULT: SW) SW: # TODO: The default Hash and Security level needs refactoring to be # fully configurable. Changing these defaults requires coordination # SHA2 is hardcoded in several places, not only BCCSP Hash: SHA2 Security: 256 # Location of Key Store FileKeyStore: # If "", defaults to 'mspConfigPath'/keystore KeyStore: # Settings for the PKCS#11 crypto provider (i.e. when DEFAULT: PKCS11) PKCS11: # Location of the PKCS11 module library Library: # Token Label Label: # User PIN Pin: Hash: Security: # Path on the file system where peer will find MSP local configurations mspConfigPath: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp # Identifier of the local MSP # ----!!!!IMPORTANT!!!-!!!IMPORTANT!!!-!!!IMPORTANT!!!!---- # Deployers need to change the value of the localMspId string. # In particular, the name of the local MSP ID of a peer needs # to match the name of one of the MSPs in each of the channel # that this peer is a member of. Otherwise this peer's messages # will not be identified as valid by other nodes. localMspId: Org1MSP # CLI common client config options client: # connection timeout connTimeout: 3s # Delivery service related config deliveryclient: # Enables this peer to disseminate blocks it pulled from the ordering service # via gossip. # Note that 'gossip.state.enabled' controls point to point block replication # of blocks committed in the past. blockGossipEnabled: true # It sets the total time the delivery service may spend in reconnection # attempts until its retry logic gives up and returns an error reconnectTotalTimeThreshold: 3600s # It sets the delivery service <-> ordering service node connection timeout connTimeout: 3s # It sets the delivery service maximal delay between consecutive retries reConnectBackoffThreshold: 3600s # A list of orderer endpoint addresses which should be overridden # when found in channel configurations. addressOverrides: # - from: # to: # caCertsFile: # - from: # to: # caCertsFile: # Type for the local MSP - by default it's of type bccsp localMspType: bccsp # Used with Go profiling tools only in none production environment. In # production, it should be disabled (eg enabled: false) profile: enabled: false listenAddress: 0.0.0.0:6060 # Handlers defines custom handlers that can filter and mutate # objects passing within the peer, such as: # Auth filter - reject or forward proposals from clients # Decorators - append or mutate the chaincode input passed to the chaincode # Endorsers - Custom signing over proposal response payload and its mutation # Valid handler definition contains: # - A name which is a factory method name defined in # core/handlers/library/library.go for statically compiled handlers # - library path to shared object binary for pluggable filters # Auth filters and decorators are chained and executed in the order that # they are defined. For example: # authFilters: # - # name: FilterOne # library: /opt/lib/filter.so # - # name: FilterTwo # decorators: # - # name: DecoratorOne # - # name: DecoratorTwo # library: /opt/lib/decorator.so # Endorsers are configured as a map that its keys are the endorsement system chaincodes that are being overridden. # Below is an example that overrides the default ESCC and uses an endorsement plugin that has the same functionality # as the default ESCC. # If the 'library' property is missing, the name is used as the constructor method in the builtin library similar # to auth filters and decorators. # endorsers: # escc: # name: DefaultESCC # library: /etc/hyperledger/fabric/plugin/escc.so handlers: authFilters: - name: DefaultAuth - name: ExpirationCheck # This filter checks identity x509 certificate expiration decorators: - name: DefaultDecorator endorsers: escc: name: DefaultEndorsement library: validators: vscc: name: DefaultValidation library: # library: /etc/hyperledger/fabric/plugin/escc.so # Number of goroutines that will execute transaction validation in parallel. # By default, the peer chooses the number of CPUs on the machine. Set this # variable to override that choice. # NOTE: overriding this value might negatively influence the performance of # the peer so please change this value only if you know what you're doing validatorPoolSize: # The discovery service is used by clients to query information about peers, # such as - which peers have joined a certain channel, what is the latest # channel config, and most importantly - given a chaincode and a channel, # what possible sets of peers satisfy the endorsement policy. discovery: enabled: true # Whether the authentication cache is enabled or not. authCacheEnabled: true # The maximum size of the cache, after which a purge takes place authCacheMaxSize: 1000 # The proportion (0 to 1) of entries that remain in the cache after the cache is purged due to overpopulation authCachePurgeRetentionRatio: 0.75 # Whether to allow non-admins to perform non channel scoped queries. # When this is false, it means that only peer admins can perform non channel scoped queries. orgMembersAllowedAccess: false # Limits is used to configure some internal resource limits. limits: # Concurrency limits the number of concurrently running requests to a service on each peer. # Currently this option is only applied to endorser service and deliver service. # When the property is missing or the value is 0, the concurrency limit is disabled for the service. concurrency: # endorserService limits concurrent requests to endorser service that handles chaincode deployment, query and invocation, # including both user chaincodes and system chaincodes. endorserService: 2500 # deliverService limits concurrent event listeners registered to deliver service for blocks and transaction events. deliverService: 2500 # gatewayService limits concurrent requests to gateway service that handles the submission and evaluation of transactions. gatewayService: 500 # Since all nodes should be consistent it is recommended to keep # the default value of 100MB for MaxRecvMsgSize & MaxSendMsgSize # Max message size in bytes GRPC server and client can receive maxRecvMsgSize: 104857600 # Max message size in bytes GRPC server and client can send maxSendMsgSize: 104857600 ############################################################################### # # VM section # ############################################################################### vm: # Endpoint of the vm management system. For docker can be one of the following in general # unix:///var/run/docker.sock # http://localhost:2375 # https://localhost:2376 # If you utilize external chaincode builders and don't need the default Docker chaincode builder, # the endpoint should be unconfigured so that the peer's Docker health checker doesn't get registered. endpoint: unix:///var/run/docker.sock # settings for docker vms docker: tls: enabled: false ca: file: docker/ca.crt cert: file: docker/tls.crt key: file: docker/tls.key # Enables/disables the standard out/err from chaincode containers for # debugging purposes attachStdout: false # Parameters on creating docker container. # Container may be efficiently created using ipam & dns-server for cluster # NetworkMode - sets the networking mode for the container. Supported # standard values are: `host`(default),`bridge`,`ipvlan`,`none`. # Dns - a list of DNS servers for the container to use. # Note: `Privileged` `Binds` `Links` and `PortBindings` properties of # Docker Host Config are not supported and will not be used if set. # LogConfig - sets the logging driver (Type) and related options # (Config) for Docker. For more info, # https://docs.docker.com/engine/admin/logging/overview/ # Note: Set LogConfig using Environment Variables is not supported. hostConfig: NetworkMode: host Dns: # - 192.168.0.1 LogConfig: Type: json-file Config: max-size: "50m" max-file: "5" Memory: 2147483648 ############################################################################### # # Chaincode section # ############################################################################### chaincode: # The id is used by the Chaincode stub to register the executing Chaincode # ID with the Peer and is generally supplied through ENV variables # the `path` form of ID is provided when installing the chaincode. # The `name` is used for all other requests and can be any string. id: path: name: # Generic builder environment, suitable for most chaincode types builder: $(DOCKER_NS)/fabric-ccenv:$(TWO_DIGIT_VERSION) # Enables/disables force pulling of the base docker images (listed below) # during user chaincode instantiation. # Useful when using moving image tags (such as :latest) pull: false golang: # golang will never need more than baseos runtime: $(DOCKER_NS)/fabric-baseos:$(TWO_DIGIT_VERSION) # whether or not golang chaincode should be linked dynamically dynamicLink: false java: # This is an image based on java:openjdk-8 with addition compiler # tools added for java shim layer packaging. # This image is packed with shim layer libraries that are necessary # for Java chaincode runtime. runtime: $(DOCKER_NS)/fabric-javaenv:$(TWO_DIGIT_VERSION) node: # This is an image based on node:$(NODE_VER)-alpine runtime: $(DOCKER_NS)/fabric-nodeenv:$(TWO_DIGIT_VERSION) # List of directories to treat as external builders and launchers for # chaincode. The external builder detection processing will iterate over the # builders in the order specified below. # If you don't need to fallback to the default Docker builder, also unconfigure vm.endpoint above. # To override this property via env variable use CORE_CHAINCODE_EXTERNALBUILDERS: [{name: x, path: dir1}, {name: y, path: dir2}] externalBuilders: - name: ccaas_builder path: /opt/hyperledger/ccaas_builder propagateEnvironment: - CHAINCODE_AS_A_SERVICE_BUILDER_CONFIG # The maximum duration to wait for the chaincode build and install process # to complete. installTimeout: 300s # Timeout duration for starting up a container and waiting for Register # to come through. startuptimeout: 300s # Timeout duration for Invoke and Init calls to prevent runaway. # This timeout is used by all chaincodes in all the channels, including # system chaincodes. # Note that during Invoke, if the image is not available (e.g. being # cleaned up when in development environment), the peer will automatically # build the image, which might take more time. In production environment, # the chaincode image is unlikely to be deleted, so the timeout could be # reduced accordingly. executetimeout: 30s # There are 2 modes: "dev" and "net". # In dev mode, user runs the chaincode after starting peer from # command line on local machine. # In net mode, peer will run chaincode in a docker container. mode: net # keepalive in seconds. In situations where the communication goes through a # proxy that does not support keep-alive, this parameter will maintain connection # between peer and chaincode. # A value <= 0 turns keepalive off keepalive: 0 # enabled system chaincodes system: _lifecycle: enable cscc: enable lscc: enable qscc: enable # Logging section for the chaincode container logging: # Default level for all loggers within the chaincode container level: info # Override default level for the 'shim' logger shim: warning # Format for the chaincode container logs format: '%{color}%{time:2006-01-02 15:04:05.000 MST} [%{module}] %{shortfunc} -> %{level:.4s} %{id:03x}%{color:reset} %{message}' ############################################################################### # # Ledger section - ledger configuration encompasses both the blockchain # and the state # ############################################################################### ledger: blockchain: state: # stateDatabase - options are "goleveldb", "CouchDB" # goleveldb - default state database stored in goleveldb. # CouchDB - store state database in CouchDB stateDatabase: goleveldb # Limit on the number of records to return per query totalQueryLimit: 100000 couchDBConfig: # It is recommended to run CouchDB on the same server as the peer, and # not map the CouchDB container port to a server port in docker-compose. # Otherwise proper security must be provided on the connection between # CouchDB client (on the peer) and server. couchDBAddress: 127.0.0.1:5984 # This username must have read and write authority on CouchDB username: # The password is recommended to pass as an environment variable # during start up (eg CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD). # If it is stored here, the file must be access control protected # to prevent unintended users from discovering the password. password: # Number of retries for CouchDB errors maxRetries: 3 # Number of retries for CouchDB errors during peer startup. # The delay between retries doubles for each attempt. # Default of 10 retries results in 11 attempts over 2 minutes. maxRetriesOnStartup: 10 # CouchDB request timeout (unit: duration, e.g. 20s) requestTimeout: 35s # Limit on the number of records per each CouchDB query # Note that chaincode queries are only bound by totalQueryLimit. # Internally the chaincode may execute multiple CouchDB queries, # each of size internalQueryLimit. internalQueryLimit: 1000 # Limit on the number of records per CouchDB bulk update batch maxBatchUpdateSize: 1000 # Create the _global_changes system database # This is optional. Creating the global changes database will require # additional system resources to track changes and maintain the database createGlobalChangesDB: false # CacheSize denotes the maximum mega bytes (MB) to be allocated for the in-memory state # cache. Note that CacheSize needs to be a multiple of 32 MB. If it is not a multiple # of 32 MB, the peer would round the size to the next multiple of 32 MB. # To disable the cache, 0 MB needs to be assigned to the cacheSize. cacheSize: 64 history: # enableHistoryDatabase - options are true or false # Indicates if the history of key updates should be stored. # All history 'index' will be stored in goleveldb, regardless if using # CouchDB or alternate database for the state. enableHistoryDatabase: true pvtdataStore: # the maximum db batch size for converting # the ineligible missing data entries to eligible missing data entries collElgProcMaxDbBatchSize: 5000 # the minimum duration (in milliseconds) between writing # two consecutive db batches for converting the ineligible missing data entries to eligible missing data entries collElgProcDbBatchesInterval: 1000 # The missing data entries are classified into two categories: # (1) prioritized # (2) deprioritized # Initially, all missing data are in the prioritized list. When the # reconciler is unable to fetch the missing data from other peers, # the unreconciled missing data would be moved to the deprioritized list. # The reconciler would retry deprioritized missing data after every # deprioritizedDataReconcilerInterval (unit: minutes). Note that the # interval needs to be greater than the reconcileSleepInterval deprioritizedDataReconcilerInterval: 60m snapshots: # Path on the file system where peer will store ledger snapshots rootDir: /var/hyperledger/production/snapshots/org1-peer1 ############################################################################### # # Operations section # ############################################################################### operations: # host and port for the operations server listenAddress: 127.0.0.1:9447 # TLS configuration for the operations endpoint tls: # TLS enabled enabled: false # path to PEM encoded server certificate for the operations server cert: file: # path to PEM encoded server key for the operations server key: file: # most operations service endpoints require client authentication when TLS # is enabled. clientAuthRequired requires client certificate authentication # at the TLS layer to access all resources. clientAuthRequired: false # paths to PEM encoded ca certificates to trust for client authentication clientRootCAs: files: [] ############################################################################### # # Metrics section # ############################################################################### metrics: # metrics provider is one of statsd, prometheus, or disabled provider: disabled # statsd configuration statsd: # network type: tcp or udp network: udp # statsd server address address: 127.0.0.1:8126 # the interval at which locally cached counters and gauges are pushed # to statsd; timings are pushed immediately writeInterval: 10s # prefix is prepended to all emitted statsd metrics prefix:
peer0-org2中的core.yaml
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
###############################################################################
#
# Peer section
#
###############################################################################
peer:
# The peer id provides a name for this peer instance and is used when
# naming docker resources.
id: peer0.org2.example.com
# The networkId allows for logical separation of networks and is used when
# naming docker resources.
networkId: dev
# The Address at local network interface this Peer will listen on.
# By default, it will listen on all network interfaces
listenAddress: 127.0.0.1:9051
# The endpoint this peer uses to listen for inbound chaincode connections.
# If this is commented-out, the listen address is selected to be
# the peer's address (see below) with port 7052
chaincodeListenAddress: 127.0.0.1:7055
# The endpoint the chaincode for this peer uses to connect to the peer.
# If this is not specified, the chaincodeListenAddress address is selected.
# And if chaincodeListenAddress is not specified, address is selected from
# peer address (see below). If specified peer address is invalid then it
# will fallback to the auto detected IP (local IP) regardless of the peer
# addressAutoDetect value.
chaincodeAddress: 127.0.0.1:7055
# When used as peer config, this represents the endpoint to other peers
# in the same organization. For peers in other organization, see
# gossip.externalEndpoint for more info.
# When used as CLI config, this means the peer's endpoint to interact with
address: 127.0.0.1:9051
# Whether the Peer should programmatically determine its address
# This case is useful for docker containers.
# When set to true, will override peer address.
addressAutoDetect: false
# Settings for the Peer's gateway server.
gateway:
# Whether the gateway is enabled for this Peer.
enabled: true
# endorsementTimeout is the duration the gateway waits for a response
# from other endorsing peers before returning a timeout error to the client.
endorsementTimeout: 30s
# dialTimeout is the duration the gateway waits for a connection
# to other network nodes.
dialTimeout: 2m
# Keepalive settings for peer server and clients
keepalive:
# Interval is the duration after which if the server does not see
# any activity from the client it pings the client to see if it's alive
interval: 7200s
# Timeout is the duration the server waits for a response
# from the client after sending a ping before closing the connection
timeout: 20s
# MinInterval is the minimum permitted time between client pings.
# If clients send pings more frequently, the peer server will
# disconnect them
minInterval: 60s
# Client keepalive settings for communicating with other peer nodes
client:
# Interval is the time between pings to peer nodes. This must
# greater than or equal to the minInterval specified by peer
# nodes
interval: 60s
# Timeout is the duration the client waits for a response from
# peer nodes before closing the connection
timeout: 20s
# DeliveryClient keepalive settings for communication with ordering
# nodes.
deliveryClient:
# Interval is the time between pings to ordering nodes. This must
# greater than or equal to the minInterval specified by ordering
# nodes.
interval: 60s
# Timeout is the duration the client waits for a response from
# ordering nodes before closing the connection
timeout: 20s
# Gossip related configuration
gossip:
# Bootstrap set to initialize gossip with.
# This is a list of other peers that this peer reaches out to at startup.
# Important: The endpoints here have to be endpoints of peers in the same
# organization, because the peer would refuse connecting to these endpoints
# unless they are in the same organization as the peer.
bootstrap: 127.0.0.1:9051
# NOTE: orgLeader and useLeaderElection parameters are mutual exclusive.
# Setting both to true would result in the termination of the peer
# since this is undefined state. If the peers are configured with
# useLeaderElection=false, make sure there is at least 1 peer in the
# organization that its orgLeader is set to true.
# Defines whenever peer will initialize dynamic algorithm for
# "leader" selection, where leader is the peer to establish
# connection with ordering service and use delivery protocol
# to pull ledger blocks from ordering service.
useLeaderElection: false
# Statically defines peer to be an organization "leader",
# where this means that current peer will maintain connection
# with ordering service and disseminate block across peers in
# its own organization. Multiple peers or all peers in an organization
# may be configured as org leaders, so that they all pull
# blocks directly from ordering service.
orgLeader: true
# Interval for membershipTracker polling
membershipTrackerInterval: 5s
# Overrides the endpoint that the peer publishes to peers
# in its organization. For peers in foreign organizations
# see 'externalEndpoint'
endpoint:
# Maximum count of blocks stored in memory
maxBlockCountToStore: 10
# Max time between consecutive message pushes(unit: millisecond)
maxPropagationBurstLatency: 10ms
# Max number of messages stored until a push is triggered to remote peers
maxPropagationBurstSize: 10
# Number of times a message is pushed to remote peers
propagateIterations: 1
# Number of peers selected to push messages to
propagatePeerNum: 3
# Determines frequency of pull phases(unit: second)
# Must be greater than digestWaitTime + responseWaitTime
pullInterval: 4s
# Number of peers to pull from
pullPeerNum: 3
# Determines frequency of pulling state info messages from peers(unit: second)
requestStateInfoInterval: 4s
# Determines frequency of pushing state info messages to peers(unit: second)
publishStateInfoInterval: 4s
# Maximum time a stateInfo message is kept until expired
stateInfoRetentionInterval:
# Time from startup certificates are included in Alive messages(unit: second)
publishCertPeriod: 10s
# Should we skip verifying block messages or not (currently not in use)
skipBlockVerification: false
# Dial timeout(unit: second)
dialTimeout: 3s
# Connection timeout(unit: second)
connTimeout: 2s
# Buffer size of received messages
recvBuffSize: 20
# Buffer size of sending messages
sendBuffSize: 200
# Time to wait before pull engine processes incoming digests (unit: second)
# Should be slightly smaller than requestWaitTime
digestWaitTime: 1s
# Time to wait before pull engine removes incoming nonce (unit: milliseconds)
# Should be slightly bigger than digestWaitTime
requestWaitTime: 1500ms
# Time to wait before pull engine ends pull (unit: second)
responseWaitTime: 2s
# Alive check interval(unit: second)
aliveTimeInterval: 5s
# Alive expiration timeout(unit: second)
aliveExpirationTimeout: 25s
# Reconnect interval(unit: second)
reconnectInterval: 25s
# Max number of attempts to connect to a peer
maxConnectionAttempts: 120
# Message expiration factor for alive messages
msgExpirationFactor: 20
# This is an endpoint that is published to peers outside of the organization.
# If this isn't set, the peer will not be known to other organizations.
externalEndpoint:
# Leader election service configuration
election:
# Longest time peer waits for stable membership during leader election startup (unit: second)
startupGracePeriod: 15s
# Interval gossip membership samples to check its stability (unit: second)
membershipSampleInterval: 1s
# Time passes since last declaration message before peer decides to perform leader election (unit: second)
leaderAliveThreshold: 10s
# Time between peer sends propose message and declares itself as a leader (sends declaration message) (unit: second)
leaderElectionDuration: 5s
pvtData:
# pullRetryThreshold determines the maximum duration of time private data corresponding for a given block
# would be attempted to be pulled from peers until the block would be committed without the private data
pullRetryThreshold: 60s
# As private data enters the transient store, it is associated with the peer's ledger's height at that time.
# transientstoreMaxBlockRetention defines the maximum difference between the current ledger's height upon commit,
# and the private data residing inside the transient store that is guaranteed not to be purged.
# Private data is purged from the transient store when blocks with sequences that are multiples
# of transientstoreMaxBlockRetention are committed.
transientstoreMaxBlockRetention: 1000
# pushAckTimeout is the maximum time to wait for an acknowledgement from each peer
# at private data push at endorsement time.
pushAckTimeout: 3s
# Block to live pulling margin, used as a buffer
# to prevent peer from trying to pull private data
# from peers that is soon to be purged in next N blocks.
# This helps a newly joined peer catch up to current
# blockchain height quicker.
btlPullMargin: 10
# the process of reconciliation is done in an endless loop, while in each iteration reconciler tries to
# pull from the other peers the most recent missing blocks with a maximum batch size limitation.
# reconcileBatchSize determines the maximum batch size of missing private data that will be reconciled in a
# single iteration.
reconcileBatchSize: 10
# reconcileSleepInterval determines the time reconciler sleeps from end of an iteration until the beginning
# of the next reconciliation iteration.
reconcileSleepInterval: 1m
# reconciliationEnabled is a flag that indicates whether private data reconciliation is enable or not.
reconciliationEnabled: true
# skipPullingInvalidTransactionsDuringCommit is a flag that indicates whether pulling of invalid
# transaction's private data from other peers need to be skipped during the commit time and pulled
# only through reconciler.
skipPullingInvalidTransactionsDuringCommit: false
# implicitCollectionDisseminationPolicy specifies the dissemination policy for the peer's own implicit collection.
# When a peer endorses a proposal that writes to its own implicit collection, below values override the default values
# for disseminating private data.
# Note that it is applicable to all channels the peer has joined. The implication is that requiredPeerCount has to
# be smaller than the number of peers in a channel that has the lowest numbers of peers from the organization.
implicitCollectionDisseminationPolicy:
# requiredPeerCount defines the minimum number of eligible peers to which the peer must successfully
# disseminate private data for its own implicit collection during endorsement. Default value is 0.
requiredPeerCount: 0
# maxPeerCount defines the maximum number of eligible peers to which the peer will attempt to
# disseminate private data for its own implicit collection during endorsement. Default value is 1.
maxPeerCount: 1
# Gossip state transfer related configuration
state:
# indicates whenever state transfer is enabled or not
# default value is false, i.e. state transfer is active
# and takes care to sync up missing blocks allowing
# lagging peer to catch up to speed with rest network.
# Keep in mind that when peer.gossip.useLeaderElection is true
# and there are several peers in the organization,
# or peer.gossip.useLeaderElection is false alongside with
# peer.gossip.orgleader being false, the peer's ledger may lag behind
# the rest of the peers and will never catch up due to state transfer
# being disabled.
enabled: false
# checkInterval interval to check whether peer is lagging behind enough to
# request blocks via state transfer from another peer.
checkInterval: 10s
# responseTimeout amount of time to wait for state transfer response from
# other peers
responseTimeout: 3s
# batchSize the number of blocks to request via state transfer from another peer
batchSize: 10
# blockBufferSize reflects the size of the re-ordering buffer
# which captures blocks and takes care to deliver them in order
# down to the ledger layer. The actual buffer size is bounded between
# 0 and 2*blockBufferSize, each channel maintains its own buffer
blockBufferSize: 20
# maxRetries maximum number of re-tries to ask
# for single state transfer request
maxRetries: 3
# TLS Settings
tls:
# Require server-side TLS
enabled: true
# Require client certificates / mutual TLS for inbound connections.
# Note that clients that are not configured to use a certificate will
# fail to connect to the peer.
clientAuthRequired: false
# X.509 certificate used for TLS server
cert:
file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.crt
# Private key used for TLS server
key:
file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/server.key
# rootcert.file represents the trusted root certificate chain used for verifying certificates
# of other nodes during outbound connections.
# It is not required to be set, but can be used to augment the set of TLS CA certificates
# available from the MSPs of each channel’s configuration.
rootcert:
file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
# If mutual TLS is enabled, clientRootCAs.files contains a list of additional root certificates
# used for verifying certificates of client connections.
# It augments the set of TLS CA certificates available from the MSPs of each channel’s configuration.
# Minimally, set your organization's TLS CA root certificate so that the peer can receive join channel requests.
clientRootCAs:
files:
- /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt
# Private key used for TLS when making client connections.
# If not set, peer.tls.key.file will be used instead
clientKey:
file:
# X.509 certificate used for TLS when making client connections.
# If not set, peer.tls.cert.file will be used instead
clientCert:
file:
# Authentication contains configuration parameters related to authenticating
# client messages
authentication:
# the acceptable difference between the current server time and the
# client's time as specified in a client request message
timewindow: 15m
# Path on the file system where peer will store data (eg ledger). This
# location must be access control protected to prevent unintended
# modification that might corrupt the peer operations.
fileSystemPath: /var/hyperledger/production/org2-peer0
# BCCSP (Blockchain crypto provider): Select which crypto implementation or
# library to use
BCCSP:
Default: SW
# Settings for the SW crypto provider (i.e. when DEFAULT: SW)
SW:
# TODO: The default Hash and Security level needs refactoring to be
# fully configurable. Changing these defaults requires coordination
# SHA2 is hardcoded in several places, not only BCCSP
Hash: SHA2
Security: 256
# Location of Key Store
FileKeyStore:
# If "", defaults to 'mspConfigPath'/keystore
KeyStore:
# Settings for the PKCS#11 crypto provider (i.e. when DEFAULT: PKCS11)
PKCS11:
# Location of the PKCS11 module library
Library:
# Token Label
Label:
# User PIN
Pin:
Hash:
Security:
# Path on the file system where peer will find MSP local configurations
mspConfigPath: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp
# Identifier of the local MSP
# ----!!!!IMPORTANT!!!-!!!IMPORTANT!!!-!!!IMPORTANT!!!!----
# Deployers need to change the value of the localMspId string.
# In particular, the name of the local MSP ID of a peer needs
# to match the name of one of the MSPs in each of the channel
# that this peer is a member of. Otherwise this peer's messages
# will not be identified as valid by other nodes.
localMspId: Org2MSP
# CLI common client config options
client:
# connection timeout
connTimeout: 3s
# Delivery service related config
deliveryclient:
# Enables this peer to disseminate blocks it pulled from the ordering service
# via gossip.
# Note that 'gossip.state.enabled' controls point to point block replication
# of blocks committed in the past.
blockGossipEnabled: true
# It sets the total time the delivery service may spend in reconnection
# attempts until its retry logic gives up and returns an error
reconnectTotalTimeThreshold: 3600s
# It sets the delivery service <-> ordering service node connection timeout
connTimeout: 3s
# It sets the delivery service maximal delay between consecutive retries
reConnectBackoffThreshold: 3600s
# A list of orderer endpoint addresses which should be overridden
# when found in channel configurations.
addressOverrides:
# - from:
# to:
# caCertsFile:
# - from:
# to:
# caCertsFile:
# Type for the local MSP - by default it's of type bccsp
localMspType: bccsp
# Used with Go profiling tools only in none production environment. In
# production, it should be disabled (eg enabled: false)
profile:
enabled: false
listenAddress: 0.0.0.0:6060
# Handlers defines custom handlers that can filter and mutate
# objects passing within the peer, such as:
# Auth filter - reject or forward proposals from clients
# Decorators - append or mutate the chaincode input passed to the chaincode
# Endorsers - Custom signing over proposal response payload and its mutation
# Valid handler definition contains:
# - A name which is a factory method name defined in
# core/handlers/library/library.go for statically compiled handlers
# - library path to shared object binary for pluggable filters
# Auth filters and decorators are chained and executed in the order that
# they are defined. For example:
# authFilters:
# -
# name: FilterOne
# library: /opt/lib/filter.so
# -
# name: FilterTwo
# decorators:
# -
# name: DecoratorOne
# -
# name: DecoratorTwo
# library: /opt/lib/decorator.so
# Endorsers are configured as a map that its keys are the endorsement system chaincodes that are being overridden.
# Below is an example that overrides the default ESCC and uses an endorsement plugin that has the same functionality
# as the default ESCC.
# If the 'library' property is missing, the name is used as the constructor method in the builtin library similar
# to auth filters and decorators.
# endorsers:
# escc:
# name: DefaultESCC
# library: /etc/hyperledger/fabric/plugin/escc.so
handlers:
authFilters:
-
name: DefaultAuth
-
name: ExpirationCheck # This filter checks identity x509 certificate expiration
decorators:
-
name: DefaultDecorator
endorsers:
escc:
name: DefaultEndorsement
library:
validators:
vscc:
name: DefaultValidation
library:
# library: /etc/hyperledger/fabric/plugin/escc.so
# Number of goroutines that will execute transaction validation in parallel.
# By default, the peer chooses the number of CPUs on the machine. Set this
# variable to override that choice.
# NOTE: overriding this value might negatively influence the performance of
# the peer so please change this value only if you know what you're doing
validatorPoolSize:
# The discovery service is used by clients to query information about peers,
# such as - which peers have joined a certain channel, what is the latest
# channel config, and most importantly - given a chaincode and a channel,
# what possible sets of peers satisfy the endorsement policy.
discovery:
enabled: true
# Whether the authentication cache is enabled or not.
authCacheEnabled: true
# The maximum size of the cache, after which a purge takes place
authCacheMaxSize: 1000
# The proportion (0 to 1) of entries that remain in the cache after the cache is purged due to overpopulation
authCachePurgeRetentionRatio: 0.75
# Whether to allow non-admins to perform non channel scoped queries.
# When this is false, it means that only peer admins can perform non channel scoped queries.
orgMembersAllowedAccess: false
# Limits is used to configure some internal resource limits.
limits:
# Concurrency limits the number of concurrently running requests to a service on each peer.
# Currently this option is only applied to endorser service and deliver service.
# When the property is missing or the value is 0, the concurrency limit is disabled for the service.
concurrency:
# endorserService limits concurrent requests to endorser service that handles chaincode deployment, query and invocation,
# including both user chaincodes and system chaincodes.
endorserService: 2500
# deliverService limits concurrent event listeners registered to deliver service for blocks and transaction events.
deliverService: 2500
# gatewayService limits concurrent requests to gateway service that handles the submission and evaluation of transactions.
gatewayService: 500
# Since all nodes should be consistent it is recommended to keep
# the default value of 100MB for MaxRecvMsgSize & MaxSendMsgSize
# Max message size in bytes GRPC server and client can receive
maxRecvMsgSize: 104857600
# Max message size in bytes GRPC server and client can send
maxSendMsgSize: 104857600
###############################################################################
#
# VM section
#
###############################################################################
vm:
# Endpoint of the vm management system. For docker can be one of the following in general
# unix:///var/run/docker.sock
# http://localhost:2375
# https://localhost:2376
# If you utilize external chaincode builders and don't need the default Docker chaincode builder,
# the endpoint should be unconfigured so that the peer's Docker health checker doesn't get registered.
endpoint: unix:///var/run/docker.sock
# settings for docker vms
docker:
tls:
enabled: false
ca:
file: docker/ca.crt
cert:
file: docker/tls.crt
key:
file: docker/tls.key
# Enables/disables the standard out/err from chaincode containers for
# debugging purposes
attachStdout: false
# Parameters on creating docker container.
# Container may be efficiently created using ipam & dns-server for cluster
# NetworkMode - sets the networking mode for the container. Supported
# standard values are: `host`(default),`bridge`,`ipvlan`,`none`.
# Dns - a list of DNS servers for the container to use.
# Note: `Privileged` `Binds` `Links` and `PortBindings` properties of
# Docker Host Config are not supported and will not be used if set.
# LogConfig - sets the logging driver (Type) and related options
# (Config) for Docker. For more info,
# https://docs.docker.com/engine/admin/logging/overview/
# Note: Set LogConfig using Environment Variables is not supported.
hostConfig:
NetworkMode: host
Dns:
# - 192.168.0.1
LogConfig:
Type: json-file
Config:
max-size: "50m"
max-file: "5"
Memory: 2147483648
###############################################################################
#
# Chaincode section
#
###############################################################################
chaincode:
# The id is used by the Chaincode stub to register the executing Chaincode
# ID with the Peer and is generally supplied through ENV variables
# the `path` form of ID is provided when installing the chaincode.
# The `name` is used for all other requests and can be any string.
id:
path:
name:
# Generic builder environment, suitable for most chaincode types
builder: $(DOCKER_NS)/fabric-ccenv:$(TWO_DIGIT_VERSION)
# Enables/disables force pulling of the base docker images (listed below)
# during user chaincode instantiation.
# Useful when using moving image tags (such as :latest)
pull: false
golang:
# golang will never need more than baseos
runtime: $(DOCKER_NS)/fabric-baseos:$(TWO_DIGIT_VERSION)
# whether or not golang chaincode should be linked dynamically
dynamicLink: false
java:
# This is an image based on java:openjdk-8 with addition compiler
# tools added for java shim layer packaging.
# This image is packed with shim layer libraries that are necessary
# for Java chaincode runtime.
runtime: $(DOCKER_NS)/fabric-javaenv:$(TWO_DIGIT_VERSION)
node:
# This is an image based on node:$(NODE_VER)-alpine
runtime: $(DOCKER_NS)/fabric-nodeenv:$(TWO_DIGIT_VERSION)
# List of directories to treat as external builders and launchers for
# chaincode. The external builder detection processing will iterate over the
# builders in the order specified below.
# If you don't need to fallback to the default Docker builder, also unconfigure vm.endpoint above.
# To override this property via env variable use CORE_CHAINCODE_EXTERNALBUILDERS: [{name: x, path: dir1}, {name: y, path: dir2}]
externalBuilders:
- name: ccaas_builder
path: /opt/hyperledger/ccaas_builder
propagateEnvironment:
- CHAINCODE_AS_A_SERVICE_BUILDER_CONFIG
# The maximum duration to wait for the chaincode build and install process
# to complete.
installTimeout: 300s
# Timeout duration for starting up a container and waiting for Register
# to come through.
startuptimeout: 300s
# Timeout duration for Invoke and Init calls to prevent runaway.
# This timeout is used by all chaincodes in all the channels, including
# system chaincodes.
# Note that during Invoke, if the image is not available (e.g. being
# cleaned up when in development environment), the peer will automatically
# build the image, which might take more time. In production environment,
# the chaincode image is unlikely to be deleted, so the timeout could be
# reduced accordingly.
executetimeout: 30s
# There are 2 modes: "dev" and "net".
# In dev mode, user runs the chaincode after starting peer from
# command line on local machine.
# In net mode, peer will run chaincode in a docker container.
mode: net
# keepalive in seconds. In situations where the communication goes through a
# proxy that does not support keep-alive, this parameter will maintain connection
# between peer and chaincode.
# A value <= 0 turns keepalive off
keepalive: 0
# enabled system chaincodes
system:
_lifecycle: enable
cscc: enable
lscc: enable
qscc: enable
# Logging section for the chaincode container
logging:
# Default level for all loggers within the chaincode container
level: info
# Override default level for the 'shim' logger
shim: warning
# Format for the chaincode container logs
format: '%{color}%{time:2006-01-02 15:04:05.000 MST} [%{module}] %{shortfunc} -> %{level:.4s} %{id:03x}%{color:reset} %{message}'
###############################################################################
#
# Ledger section - ledger configuration encompasses both the blockchain
# and the state
#
###############################################################################
ledger:
blockchain:
state:
# stateDatabase - options are "goleveldb", "CouchDB"
# goleveldb - default state database stored in goleveldb.
# CouchDB - store state database in CouchDB
stateDatabase: goleveldb
# Limit on the number of records to return per query
totalQueryLimit: 100000
couchDBConfig:
# It is recommended to run CouchDB on the same server as the peer, and
# not map the CouchDB container port to a server port in docker-compose.
# Otherwise proper security must be provided on the connection between
# CouchDB client (on the peer) and server.
couchDBAddress: 127.0.0.1:5984
# This username must have read and write authority on CouchDB
username:
# The password is recommended to pass as an environment variable
# during start up (eg CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD).
# If it is stored here, the file must be access control protected
# to prevent unintended users from discovering the password.
password:
# Number of retries for CouchDB errors
maxRetries: 3
# Number of retries for CouchDB errors during peer startup.
# The delay between retries doubles for each attempt.
# Default of 10 retries results in 11 attempts over 2 minutes.
maxRetriesOnStartup: 10
# CouchDB request timeout (unit: duration, e.g. 20s)
requestTimeout: 35s
# Limit on the number of records per each CouchDB query
# Note that chaincode queries are only bound by totalQueryLimit.
# Internally the chaincode may execute multiple CouchDB queries,
# each of size internalQueryLimit.
internalQueryLimit: 1000
# Limit on the number of records per CouchDB bulk update batch
maxBatchUpdateSize: 1000
# Create the _global_changes system database
# This is optional. Creating the global changes database will require
# additional system resources to track changes and maintain the database
createGlobalChangesDB: false
# CacheSize denotes the maximum mega bytes (MB) to be allocated for the in-memory state
# cache. Note that CacheSize needs to be a multiple of 32 MB. If it is not a multiple
# of 32 MB, the peer would round the size to the next multiple of 32 MB.
# To disable the cache, 0 MB needs to be assigned to the cacheSize.
cacheSize: 64
history:
# enableHistoryDatabase - options are true or false
# Indicates if the history of key updates should be stored.
# All history 'index' will be stored in goleveldb, regardless if using
# CouchDB or alternate database for the state.
enableHistoryDatabase: true
pvtdataStore:
# the maximum db batch size for converting
# the ineligible missing data entries to eligible missing data entries
collElgProcMaxDbBatchSize: 5000
# the minimum duration (in milliseconds) between writing
# two consecutive db batches for converting the ineligible missing data entries to eligible missing data entries
collElgProcDbBatchesInterval: 1000
# The missing data entries are classified into two categories:
# (1) prioritized
# (2) deprioritized
# Initially, all missing data are in the prioritized list. When the
# reconciler is unable to fetch the missing data from other peers,
# the unreconciled missing data would be moved to the deprioritized list.
# The reconciler would retry deprioritized missing data after every
# deprioritizedDataReconcilerInterval (unit: minutes). Note that the
# interval needs to be greater than the reconcileSleepInterval
deprioritizedDataReconcilerInterval: 60m
snapshots:
# Path on the file system where peer will store ledger snapshots
rootDir: /var/hyperledger/production/snapshots/org2-peer0
###############################################################################
#
# Operations section
#
###############################################################################
operations:
# host and port for the operations server
listenAddress: 127.0.0.1:9448
# TLS configuration for the operations endpoint
tls:
# TLS enabled
enabled: false
# path to PEM encoded server certificate for the operations server
cert:
file:
# path to PEM encoded server key for the operations server
key:
file:
# most operations service endpoints require client authentication when TLS
# is enabled. clientAuthRequired requires client certificate authentication
# at the TLS layer to access all resources.
clientAuthRequired: false
# paths to PEM encoded ca certificates to trust for client authentication
clientRootCAs:
files: []
###############################################################################
#
# Metrics section
#
###############################################################################
metrics:
# metrics provider is one of statsd, prometheus, or disabled
provider: disabled
# statsd configuration
statsd:
# network type: tcp or udp
network: udp
# statsd server address
address: 127.0.0.1:8127
# the interval at which locally cached counters and gauges are pushed
# to statsd; timings are pushed immediately
writeInterval: 10s
# prefix is prepended to all emitted statsd metrics
prefix:
peer1-org2中的core.yaml
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
###############################################################################
#
# Peer section
#
###############################################################################
peer:
# The peer id provides a name for this peer instance and is used when
# naming docker resources.
id: peer1.org2.example.com
# The networkId allows for logical separation of networks and is used when
# naming docker resources.
networkId: dev
# The Address at local network interface this Peer will listen on.
# By default, it will listen on all network interfaces
listenAddress: 127.0.0.1:10051
# The endpoint this peer uses to listen for inbound chaincode connections.
# If this is commented-out, the listen address is selected to be
# the peer's address (see below) with port 7052
chaincodeListenAddress: 127.0.0.1:7056
# The endpoint the chaincode for this peer uses to connect to the peer.
# If this is not specified, the chaincodeListenAddress address is selected.
# And if chaincodeListenAddress is not specified, address is selected from
# peer address (see below). If specified peer address is invalid then it
# will fallback to the auto detected IP (local IP) regardless of the peer
# addressAutoDetect value.
chaincodeAddress: 127.0.0.1:7056
# When used as peer config, this represents the endpoint to other peers
# in the same organization. For peers in other organization, see
# gossip.externalEndpoint for more info.
# When used as CLI config, this means the peer's endpoint to interact with
address: 127.0.0.1:10051
# Whether the Peer should programmatically determine its address
# This case is useful for docker containers.
# When set to true, will override peer address.
addressAutoDetect: false
# Settings for the Peer's gateway server.
gateway:
# Whether the gateway is enabled for this Peer.
enabled: true
# endorsementTimeout is the duration the gateway waits for a response
# from other endorsing peers before returning a timeout error to the client.
endorsementTimeout: 30s
# dialTimeout is the duration the gateway waits for a connection
# to other network nodes.
dialTimeout: 2m
# Keepalive settings for peer server and clients
keepalive:
# Interval is the duration after which if the server does not see
# any activity from the client it pings the client to see if it's alive
interval: 7200s
# Timeout is the duration the server waits for a response
# from the client after sending a ping before closing the connection
timeout: 20s
# MinInterval is the minimum permitted time between client pings.
# If clients send pings more frequently, the peer server will
# disconnect them
minInterval: 60s
# Client keepalive settings for communicating with other peer nodes
client:
# Interval is the time between pings to peer nodes. This must
# greater than or equal to the minInterval specified by peer
# nodes
interval: 60s
# Timeout is the duration the client waits for a response from
# peer nodes before closing the connection
timeout: 20s
# DeliveryClient keepalive settings for communication with ordering
# nodes.
deliveryClient:
# Interval is the time between pings to ordering nodes. This must
# greater than or equal to the minInterval specified by ordering
# nodes.
interval: 60s
# Timeout is the duration the client waits for a response from
# ordering nodes before closing the connection
timeout: 20s
# Gossip related configuration
gossip:
# Bootstrap set to initialize gossip with.
# This is a list of other peers that this peer reaches out to at startup.
# Important: The endpoints here have to be endpoints of peers in the same
# organization, because the peer would refuse connecting to these endpoints
# unless they are in the same organization as the peer.
bootstrap: 127.0.0.1:10051
# NOTE: orgLeader and useLeaderElection parameters are mutual exclusive.
# Setting both to true would result in the termination of the peer
# since this is undefined state. If the peers are configured with
# useLeaderElection=false, make sure there is at least 1 peer in the
# organization that its orgLeader is set to true.
# Defines whenever peer will initialize dynamic algorithm for
# "leader" selection, where leader is the peer to establish
# connection with ordering service and use delivery protocol
# to pull ledger blocks from ordering service.
useLeaderElection: false
# Statically defines peer to be an organization "leader",
# where this means that current peer will maintain connection
# with ordering service and disseminate block across peers in
# its own organization. Multiple peers or all peers in an organization
# may be configured as org leaders, so that they all pull
# blocks directly from ordering service.
orgLeader: true
# Interval for membershipTracker polling
membershipTrackerInterval: 5s
# Overrides the endpoint that the peer publishes to peers
# in its organization. For peers in foreign organizations
# see 'externalEndpoint'
endpoint:
# Maximum count of blocks stored in memory
maxBlockCountToStore: 10
# Max time between consecutive message pushes(unit: millisecond)
maxPropagationBurstLatency: 10ms
# Max number of messages stored until a push is triggered to remote peers
maxPropagationBurstSize: 10
# Number of times a message is pushed to remote peers
propagateIterations: 1
# Number of peers selected to push messages to
propagatePeerNum: 3
# Determines frequency of pull phases(unit: second)
# Must be greater than digestWaitTime + responseWaitTime
pullInterval: 4s
# Number of peers to pull from
pullPeerNum: 3
# Determines frequency of pulling state info messages from peers(unit: second)
requestStateInfoInterval: 4s
# Determines frequency of pushing state info messages to peers(unit: second)
publishStateInfoInterval: 4s
# Maximum time a stateInfo message is kept until expired
stateInfoRetentionInterval:
# Time from startup certificates are included in Alive messages(unit: second)
publishCertPeriod: 10s
# Should we skip verifying block messages or not (currently not in use)
skipBlockVerification: false
# Dial timeout(unit: second)
dialTimeout: 3s
# Connection timeout(unit: second)
connTimeout: 2s
# Buffer size of received messages
recvBuffSize: 20
# Buffer size of sending messages
sendBuffSize: 200
# Time to wait before pull engine processes incoming digests (unit: second)
# Should be slightly smaller than requestWaitTime
digestWaitTime: 1s
# Time to wait before pull engine removes incoming nonce (unit: milliseconds)
# Should be slightly bigger than digestWaitTime
requestWaitTime: 1500ms
# Time to wait before pull engine ends pull (unit: second)
responseWaitTime: 2s
# Alive check interval(unit: second)
aliveTimeInterval: 5s
# Alive expiration timeout(unit: second)
aliveExpirationTimeout: 25s
# Reconnect interval(unit: second)
reconnectInterval: 25s
# Max number of attempts to connect to a peer
maxConnectionAttempts: 120
# Message expiration factor for alive messages
msgExpirationFactor: 20
# This is an endpoint that is published to peers outside of the organization.
# If this isn't set, the peer will not be known to other organizations.
externalEndpoint:
# Leader election service configuration
election:
# Longest time peer waits for stable membership during leader election startup (unit: second)
startupGracePeriod: 15s
# Interval gossip membership samples to check its stability (unit: second)
membershipSampleInterval: 1s
# Time passes since last declaration message before peer decides to perform leader election (unit: second)
leaderAliveThreshold: 10s
# Time between peer sends propose message and declares itself as a leader (sends declaration message) (unit: second)
leaderElectionDuration: 5s
pvtData:
# pullRetryThreshold determines the maximum duration of time private data corresponding for a given block
# would be attempted to be pulled from peers until the block would be committed without the private data
pullRetryThreshold: 60s
# As private data enters the transient store, it is associated with the peer's ledger's height at that time.
# transientstoreMaxBlockRetention defines the maximum difference between the current ledger's height upon commit,
# and the private data residing inside the transient store that is guaranteed not to be purged.
# Private data is purged from the transient store when blocks with sequences that are multiples
# of transientstoreMaxBlockRetention are committed.
transientstoreMaxBlockRetention: 1000
# pushAckTimeout is the maximum time to wait for an acknowledgement from each peer
# at private data push at endorsement time.
pushAckTimeout: 3s
# Block to live pulling margin, used as a buffer
# to prevent peer from trying to pull private data
# from peers that is soon to be purged in next N blocks.
# This helps a newly joined peer catch up to current
# blockchain height quicker.
btlPullMargin: 10
# the process of reconciliation is done in an endless loop, while in each iteration reconciler tries to
# pull from the other peers the most recent missing blocks with a maximum batch size limitation.
# reconcileBatchSize determines the maximum batch size of missing private data that will be reconciled in a
# single iteration.
reconcileBatchSize: 10
# reconcileSleepInterval determines the time reconciler sleeps from end of an iteration until the beginning
# of the next reconciliation iteration.
reconcileSleepInterval: 1m
# reconciliationEnabled is a flag that indicates whether private data reconciliation is enable or not.
reconciliationEnabled: true
# skipPullingInvalidTransactionsDuringCommit is a flag that indicates whether pulling of invalid
# transaction's private data from other peers need to be skipped during the commit time and pulled
# only through reconciler.
skipPullingInvalidTransactionsDuringCommit: false
# implicitCollectionDisseminationPolicy specifies the dissemination policy for the peer's own implicit collection.
# When a peer endorses a proposal that writes to its own implicit collection, below values override the default values
# for disseminating private data.
# Note that it is applicable to all channels the peer has joined. The implication is that requiredPeerCount has to
# be smaller than the number of peers in a channel that has the lowest numbers of peers from the organization.
implicitCollectionDisseminationPolicy:
# requiredPeerCount defines the minimum number of eligible peers to which the peer must successfully
# disseminate private data for its own implicit collection during endorsement. Default value is 0.
requiredPeerCount: 0
# maxPeerCount defines the maximum number of eligible peers to which the peer will attempt to
# disseminate private data for its own implicit collection during endorsement. Default value is 1.
maxPeerCount: 1
# Gossip state transfer related configuration
state:
# indicates whenever state transfer is enabled or not
# default value is false, i.e. state transfer is active
# and takes care to sync up missing blocks allowing
# lagging peer to catch up to speed with rest network.
# Keep in mind that when peer.gossip.useLeaderElection is true
# and there are several peers in the organization,
# or peer.gossip.useLeaderElection is false alongside with
# peer.gossip.orgleader being false, the peer's ledger may lag behind
# the rest of the peers and will never catch up due to state transfer
# being disabled.
enabled: false
# checkInterval interval to check whether peer is lagging behind enough to
# request blocks via state transfer from another peer.
checkInterval: 10s
# responseTimeout amount of time to wait for state transfer response from
# other peers
responseTimeout: 3s
# batchSize the number of blocks to request via state transfer from another peer
batchSize: 10
# blockBufferSize reflects the size of the re-ordering buffer
# which captures blocks and takes care to deliver them in order
# down to the ledger layer. The actual buffer size is bounded between
# 0 and 2*blockBufferSize, each channel maintains its own buffer
blockBufferSize: 20
# maxRetries maximum number of re-tries to ask
# for single state transfer request
maxRetries: 3
# TLS Settings
tls:
# Require server-side TLS
enabled: true
# Require client certificates / mutual TLS for inbound connections.
# Note that clients that are not configured to use a certificate will
# fail to connect to the peer.
clientAuthRequired: false
# X.509 certificate used for TLS server
cert:
file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.crt
# Private key used for TLS server
key:
file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/server.key
# rootcert.file represents the trusted root certificate chain used for verifying certificates
# of other nodes during outbound connections.
# It is not required to be set, but can be used to augment the set of TLS CA certificates
# available from the MSPs of each channel’s configuration.
rootcert:
file: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt # If mutual TLS is enabled, clientRootCAs.files contains a list of additional root certificates
# used for verifying certificates of client connections.
# It augments the set of TLS CA certificates available from the MSPs of each channel’s configuration.
# Minimally, set your organization's TLS CA root certificate so that the peer can receive join channel requests.
clientRootCAs:
files:
- /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt
# Private key used for TLS when making client connections.
# If not set, peer.tls.key.file will be used instead
clientKey:
file:
# X.509 certificate used for TLS when making client connections.
# If not set, peer.tls.cert.file will be used instead
clientCert:
file:
# Authentication contains configuration parameters related to authenticating
# client messages
authentication:
# the acceptable difference between the current server time and the
# client's time as specified in a client request message
timewindow: 15m
# Path on the file system where peer will store data (eg ledger). This
# location must be access control protected to prevent unintended
# modification that might corrupt the peer operations.
fileSystemPath: /var/hyperledger/production/org2-peer1
# BCCSP (Blockchain crypto provider): Select which crypto implementation or
# library to use
BCCSP:
Default: SW
# Settings for the SW crypto provider (i.e. when DEFAULT: SW)
SW:
# TODO: The default Hash and Security level needs refactoring to be
# fully configurable. Changing these defaults requires coordination
# SHA2 is hardcoded in several places, not only BCCSP
Hash: SHA2
Security: 256
# Location of Key Store
FileKeyStore:
# If "", defaults to 'mspConfigPath'/keystore
KeyStore:
# Settings for the PKCS#11 crypto provider (i.e. when DEFAULT: PKCS11)
PKCS11:
# Location of the PKCS11 module library
Library:
# Token Label
Label:
# User PIN
Pin:
Hash:
Security:
# Path on the file system where peer will find MSP local configurations
mspConfigPath: /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/msp
# Identifier of the local MSP
# ----!!!!IMPORTANT!!!-!!!IMPORTANT!!!-!!!IMPORTANT!!!!----
# Deployers need to change the value of the localMspId string.
# In particular, the name of the local MSP ID of a peer needs
# to match the name of one of the MSPs in each of the channel
# that this peer is a member of. Otherwise this peer's messages
# will not be identified as valid by other nodes.
localMspId: Org2MSP
# CLI common client config options
client:
# connection timeout
connTimeout: 3s
# Delivery service related config
deliveryclient:
# Enables this peer to disseminate blocks it pulled from the ordering service
# via gossip.
# Note that 'gossip.state.enabled' controls point to point block replication
# of blocks committed in the past.
blockGossipEnabled: true
# It sets the total time the delivery service may spend in reconnection
# attempts until its retry logic gives up and returns an error
reconnectTotalTimeThreshold: 3600s
# It sets the delivery service <-> ordering service node connection timeout
connTimeout: 3s
# It sets the delivery service maximal delay between consecutive retries
reConnectBackoffThreshold: 3600s
# A list of orderer endpoint addresses which should be overridden
# when found in channel configurations.
addressOverrides:
# - from:
# to:
# caCertsFile:
# - from:
# to:
# caCertsFile:
# Type for the local MSP - by default it's of type bccsp
localMspType: bccsp
# Used with Go profiling tools only in none production environment. In
# production, it should be disabled (eg enabled: false)
profile:
enabled: false
listenAddress: 0.0.0.0:6060
# Handlers defines custom handlers that can filter and mutate
# objects passing within the peer, such as:
# Auth filter - reject or forward proposals from clients
# Decorators - append or mutate the chaincode input passed to the chaincode
# Endorsers - Custom signing over proposal response payload and its mutation
# Valid handler definition contains:
# - A name which is a factory method name defined in
# core/handlers/library/library.go for statically compiled handlers
# - library path to shared object binary for pluggable filters
# Auth filters and decorators are chained and executed in the order that
# they are defined. For example:
# authFilters:
# -
# name: FilterOne
# library: /opt/lib/filter.so
# -
# name: FilterTwo
# decorators:
# -
# name: DecoratorOne
# -
# name: DecoratorTwo
# library: /opt/lib/decorator.so
# Endorsers are configured as a map that its keys are the endorsement system chaincodes that are being overridden.
# Below is an example that overrides the default ESCC and uses an endorsement plugin that has the same functionality
# as the default ESCC.
# If the 'library' property is missing, the name is used as the constructor method in the builtin library similar
# to auth filters and decorators.
# endorsers:
# escc:
# name: DefaultESCC
# library: /etc/hyperledger/fabric/plugin/escc.so
handlers:
authFilters:
-
name: DefaultAuth
-
name: ExpirationCheck # This filter checks identity x509 certificate expiration
decorators:
-
name: DefaultDecorator
endorsers:
escc:
name: DefaultEndorsement
library:
validators:
vscc:
name: DefaultValidation
library:
# library: /etc/hyperledger/fabric/plugin/escc.so
# Number of goroutines that will execute transaction validation in parallel.
# By default, the peer chooses the number of CPUs on the machine. Set this
# variable to override that choice.
# NOTE: overriding this value might negatively influence the performance of
# the peer so please change this value only if you know what you're doing
validatorPoolSize:
# The discovery service is used by clients to query information about peers,
# such as - which peers have joined a certain channel, what is the latest
# channel config, and most importantly - given a chaincode and a channel,
# what possible sets of peers satisfy the endorsement policy.
discovery:
enabled: true
# Whether the authentication cache is enabled or not.
authCacheEnabled: true
# The maximum size of the cache, after which a purge takes place
authCacheMaxSize: 1000
# The proportion (0 to 1) of entries that remain in the cache after the cache is purged due to overpopulation
authCachePurgeRetentionRatio: 0.75
# Whether to allow non-admins to perform non channel scoped queries.
# When this is false, it means that only peer admins can perform non channel scoped queries.
orgMembersAllowedAccess: false
# Limits is used to configure some internal resource limits.
limits:
# Concurrency limits the number of concurrently running requests to a service on each peer.
# Currently this option is only applied to endorser service and deliver service.
# When the property is missing or the value is 0, the concurrency limit is disabled for the service.
concurrency:
# endorserService limits concurrent requests to endorser service that handles chaincode deployment, query and invocation,
# including both user chaincodes and system chaincodes.
endorserService: 2500
# deliverService limits concurrent event listeners registered to deliver service for blocks and transaction events.
deliverService: 2500
# gatewayService limits concurrent requests to gateway service that handles the submission and evaluation of transactions.
gatewayService: 500
# Since all nodes should be consistent it is recommended to keep
# the default value of 100MB for MaxRecvMsgSize & MaxSendMsgSize
# Max message size in bytes GRPC server and client can receive
maxRecvMsgSize: 104857600
# Max message size in bytes GRPC server and client can send
maxSendMsgSize: 104857600
###############################################################################
#
# VM section
#
###############################################################################
vm:
# Endpoint of the vm management system. For docker can be one of the following in general
# unix:///var/run/docker.sock
# http://localhost:2375
# https://localhost:2376
# If you utilize external chaincode builders and don't need the default Docker chaincode builder,
# the endpoint should be unconfigured so that the peer's Docker health checker doesn't get registered.
endpoint: unix:///var/run/docker.sock
# settings for docker vms
docker:
tls:
enabled: false
ca:
file: docker/ca.crt
cert:
file: docker/tls.crt
key:
file: docker/tls.key
# Enables/disables the standard out/err from chaincode containers for
# debugging purposes
attachStdout: false
# Parameters on creating docker container.
# Container may be efficiently created using ipam & dns-server for cluster
# NetworkMode - sets the networking mode for the container. Supported
# standard values are: `host`(default),`bridge`,`ipvlan`,`none`.
# Dns - a list of DNS servers for the container to use.
# Note: `Privileged` `Binds` `Links` and `PortBindings` properties of
# Docker Host Config are not supported and will not be used if set.
# LogConfig - sets the logging driver (Type) and related options
# (Config) for Docker. For more info,
# https://docs.docker.com/engine/admin/logging/overview/
# Note: Set LogConfig using Environment Variables is not supported.
hostConfig:
NetworkMode: host
Dns:
# - 192.168.0.1
LogConfig:
Type: json-file
Config:
max-size: "50m"
max-file: "5"
Memory: 2147483648
###############################################################################
#
# Chaincode section
#
###############################################################################
chaincode:
# The id is used by the Chaincode stub to register the executing Chaincode
# ID with the Peer and is generally supplied through ENV variables
# the `path` form of ID is provided when installing the chaincode.
# The `name` is used for all other requests and can be any string.
id:
path:
name:
# Generic builder environment, suitable for most chaincode types
builder: $(DOCKER_NS)/fabric-ccenv:$(TWO_DIGIT_VERSION)
# Enables/disables force pulling of the base docker images (listed below)
# during user chaincode instantiation.
# Useful when using moving image tags (such as :latest)
pull: false
golang:
# golang will never need more than baseos
runtime: $(DOCKER_NS)/fabric-baseos:$(TWO_DIGIT_VERSION)
# whether or not golang chaincode should be linked dynamically
dynamicLink: false
java:
# This is an image based on java:openjdk-8 with addition compiler
# tools added for java shim layer packaging.
# This image is packed with shim layer libraries that are necessary
# for Java chaincode runtime.
runtime: $(DOCKER_NS)/fabric-javaenv:$(TWO_DIGIT_VERSION)
node:
# This is an image based on node:$(NODE_VER)-alpine
runtime: $(DOCKER_NS)/fabric-nodeenv:$(TWO_DIGIT_VERSION)
# List of directories to treat as external builders and launchers for
# chaincode. The external builder detection processing will iterate over the
# builders in the order specified below.
# If you don't need to fallback to the default Docker builder, also unconfigure vm.endpoint above.
# To override this property via env variable use CORE_CHAINCODE_EXTERNALBUILDERS: [{name: x, path: dir1}, {name: y, path: dir2}]
externalBuilders:
- name: ccaas_builder
path: /opt/hyperledger/ccaas_builder
propagateEnvironment:
- CHAINCODE_AS_A_SERVICE_BUILDER_CONFIG
# The maximum duration to wait for the chaincode build and install process
# to complete.
installTimeout: 300s
# Timeout duration for starting up a container and waiting for Register
# to come through.
startuptimeout: 300s
# Timeout duration for Invoke and Init calls to prevent runaway.
# This timeout is used by all chaincodes in all the channels, including
# system chaincodes.
# Note that during Invoke, if the image is not available (e.g. being
# cleaned up when in development environment), the peer will automatically
# build the image, which might take more time. In production environment,
# the chaincode image is unlikely to be deleted, so the timeout could be
# reduced accordingly.
executetimeout: 30s
# There are 2 modes: "dev" and "net".
# In dev mode, user runs the chaincode after starting peer from
# command line on local machine.
# In net mode, peer will run chaincode in a docker container.
mode: net
# keepalive in seconds. In situations where the communication goes through a
# proxy that does not support keep-alive, this parameter will maintain connection
# between peer and chaincode.
# A value <= 0 turns keepalive off
keepalive: 0
# enabled system chaincodes
system:
_lifecycle: enable
cscc: enable
lscc: enable
qscc: enable
# Logging section for the chaincode container
logging:
# Default level for all loggers within the chaincode container
level: info
# Override default level for the 'shim' logger
shim: warning
# Format for the chaincode container logs
format: '%{color}%{time:2006-01-02 15:04:05.000 MST} [%{module}] %{shortfunc} -> %{level:.4s} %{id:03x}%{color:reset} %{message}'
###############################################################################
#
# Ledger section - ledger configuration encompasses both the blockchain
# and the state
#
###############################################################################
ledger:
blockchain:
state:
# stateDatabase - options are "goleveldb", "CouchDB"
# goleveldb - default state database stored in goleveldb.
# CouchDB - store state database in CouchDB
stateDatabase: goleveldb
# Limit on the number of records to return per query
totalQueryLimit: 100000
couchDBConfig:
# It is recommended to run CouchDB on the same server as the peer, and
# not map the CouchDB container port to a server port in docker-compose.
# Otherwise proper security must be provided on the connection between
# CouchDB client (on the peer) and server.
couchDBAddress: 127.0.0.1:5984
# This username must have read and write authority on CouchDB
username:
# The password is recommended to pass as an environment variable
# during start up (eg CORE_LEDGER_STATE_COUCHDBCONFIG_PASSWORD).
# If it is stored here, the file must be access control protected
# to prevent unintended users from discovering the password.
password:
# Number of retries for CouchDB errors
maxRetries: 3
# Number of retries for CouchDB errors during peer startup.
# The delay between retries doubles for each attempt.
# Default of 10 retries results in 11 attempts over 2 minutes.
maxRetriesOnStartup: 10
# CouchDB request timeout (unit: duration, e.g. 20s)
requestTimeout: 35s
# Limit on the number of records per each CouchDB query
# Note that chaincode queries are only bound by totalQueryLimit.
# Internally the chaincode may execute multiple CouchDB queries,
# each of size internalQueryLimit.
internalQueryLimit: 1000
# Limit on the number of records per CouchDB bulk update batch
maxBatchUpdateSize: 1000
# Create the _global_changes system database
# This is optional. Creating the global changes database will require
# additional system resources to track changes and maintain the database
createGlobalChangesDB: false
# CacheSize denotes the maximum mega bytes (MB) to be allocated for the in-memory state
# cache. Note that CacheSize needs to be a multiple of 32 MB. If it is not a multiple
# of 32 MB, the peer would round the size to the next multiple of 32 MB.
# To disable the cache, 0 MB needs to be assigned to the cacheSize.
cacheSize: 64
history:
# enableHistoryDatabase - options are true or false
# Indicates if the history of key updates should be stored.
# All history 'index' will be stored in goleveldb, regardless if using
# CouchDB or alternate database for the state.
enableHistoryDatabase: true
pvtdataStore:
# the maximum db batch size for converting
# the ineligible missing data entries to eligible missing data entries
collElgProcMaxDbBatchSize: 5000
# the minimum duration (in milliseconds) between writing
# two consecutive db batches for converting the ineligible missing data entries to eligible missing data entries
collElgProcDbBatchesInterval: 1000
# The missing data entries are classified into two categories:
# (1) prioritized
# (2) deprioritized
# Initially, all missing data are in the prioritized list. When the
# reconciler is unable to fetch the missing data from other peers,
# the unreconciled missing data would be moved to the deprioritized list.
# The reconciler would retry deprioritized missing data after every
# deprioritizedDataReconcilerInterval (unit: minutes). Note that the
# interval needs to be greater than the reconcileSleepInterval
deprioritizedDataReconcilerInterval: 60m
snapshots:
# Path on the file system where peer will store ledger snapshots
rootDir: /var/hyperledger/production/snapshots/org2-peer1
###############################################################################
#
# Operations section
#
###############################################################################
operations:
# host and port for the operations server
listenAddress: 127.0.0.1:9449
# TLS configuration for the operations endpoint
tls:
# TLS enabled
enabled: false
# path to PEM encoded server certificate for the operations server
cert:
file:
# path to PEM encoded server key for the operations server
key:
file:
# most operations service endpoints require client authentication when TLS
# is enabled. clientAuthRequired requires client certificate authentication
# at the TLS layer to access all resources.
clientAuthRequired: false
# paths to PEM encoded ca certificates to trust for client authentication
clientRootCAs:
files: []
###############################################################################
#
# Metrics section
#
###############################################################################
metrics:
# metrics provider is one of statsd, prometheus, or disabled
provider: disabled
# statsd configuration
statsd:
# network type: tcp or udp
network: udp
# statsd server address
address: 127.0.0.1:8128
# the interval at which locally cached counters and gauges are pushed
# to statsd; timings are pushed immediately
writeInterval: 10s
# prefix is prepended to all emitted statsd metrics
prefix:
二、创建通道
- 在org1-peer0中执行创建通道的命令
export CORE_PEER_LOCALMSPID=Org1MSP
export CORE_PEER_MSPCONFIGPATH=/fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
./peer channel create -o orderer0.example.com:7050 -c businesschannel -f "/fabric/3orderer-org1-2peer-org2-2peer-network/channel-artifacts/businesschannel.tx" --timeout "30s" --tls --cafile /fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/ordererOrganizations/example.com/orderers/orderer0.example.com/msp/tlscacerts/tlsca.example.com-cert.pem
文件夹中会生成一个businesschannel.block,这就是这个通道的初始区块
-
把这个通道的初始区块拷贝到channel-artifacts目录下
mv businesschannel.block /fabric/3orderer-org1-2peer-org2-2peer-network/channel-artifacts/
看到结果channel-artifacts目录下有五个文件
/fabric/3orderer-org1-2peer-org2-2peer-network/channel-artifacts/ ├── businesschannel.block ├── businesschannel.tx ├── orderer.genesis.block ├── Org1MSPanchors.tx └── Org2MSPanchors.tx
三、使得各个节点加入通道
-
org1-peer0 加入通道:-b 指定初始通道的区块位置,我们在上一步中移动到了channel-artifacts目录下
export CORE_PEER_TLS_ENABLED=true
export CORE_PEER_LOCALMSPID="Org1MSP"
export CORE_PEER_TLS_ROOTCERT_FILE=/fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
export CORE_PEER_MSPCONFIGPATH=/fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
export CORE_PEER_ADDRESS=peer0.org1.example.com:7051
./peer channel join -b /fabric/3orderer-org1-2peer-org2-2peer-network/channel-artifacts/businesschannel.block
2022-10-05 06:04:21.112 PDT 0001 INFO [channelCmd] InitCmdFactory -> Endorser and orderer connections initialized
2022-10-05 06:04:21.141 PDT 0002 INFO [channelCmd] executeJoin -> Successfully submitted proposal to join channel
看到上述输出则代表执行成功
执行该命令可以看到该节点已经加入的通道(需要在对应节点的目录下执行,也就是要当前节点包含peer目录)
./peer channel list
-
org1-peer1 加入通道
export CORE_PEER_TLS_ENABLED=true export CORE_PEER_LOCALMSPID="Org1MSP" export CORE_PEER_TLS_ROOTCERT_FILE=/fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls/ca.crt export CORE_PEER_MSPCONFIGPATH=/fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp export CORE_PEER_ADDRESS=peer1.org1.example.com:8051 ./peer channel join -b /fabric/3orderer-org1-2peer-org2-2peer-network/channel-artifacts/businesschannel.block
执行以下命令检查该节点已经加入的通道
./peer channel list
-
org2-peer0加入通道
export CORE_PEER_TLS_ENABLED=true export CORE_PEER_LOCALMSPID="Org2MSP" export CORE_PEER_TLS_ROOTCERT_FILE=/fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls/ca.crt export CORE_PEER_MSPCONFIGPATH=/fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp export CORE_PEER_ADDRESS=peer0.org2.example.com:9051 ./peer channel join -b /fabric/3orderer-org1-2peer-org2-2peer-network/channel-artifacts/businesschannel.block
执行以下命令检查该节点已经加入的通道
./peer channel list
-
org2-peer1加入通道
export CORE_PEER_TLS_ENABLED=true export CORE_PEER_LOCALMSPID="Org2MSP" export CORE_PEER_TLS_ROOTCERT_FILE=/fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls/ca.crt export CORE_PEER_MSPCONFIGPATH=/fabric/3orderer-org1-2peer-org2-2peer-network/crypto-config/peerOrganizations/org2.example.com/users/Admin@org2.example.com/msp export CORE_PEER_ADDRESS=peer1.org2.example.com:10051 ./peer channel join -b /fabric/3orderer-org1-2peer-org2-2peer-network/channel-artifacts/businesschannel.block
执行以下命令检查该节点已经加入的通道
./peer channel list