bsdiff-win.zip
windows下 差分升级升级包制作工具,合成工具,Windows中使用bsdiff bspatch
compiler-gcc5.h
编译android 内核3.4. x 时,提示找不到compiler-gcc5.h头文件。可将此文件下载放到内核include/linux文件夹下即可编译通过。如果再报错建议选择compiler-gcc6.h试试
nRF51_SDK_10.0.0_dc26b5e.zip
nRF51 SDK v10.0.0
-----------------
Release Date: Week 46
Highlights:
- New BLE Peer Manager (experimental), replacement for the BLE Device
Manager
- FreeRTOS support
- New ANT modules, additional examples, and new and expanded ANT+
profiles
- Support for Dynastream's N5 Starter Kit
- Three new BLE Services
- Precompiled HEX files
The following toolchains/devices have been used for testing and
verification:
- ARM: MDK-ARM version 5.14.0.0 and 5.16a
- GCC: GCC ARM Embedded 4.9 2015q1
- IAR: IAR Workbench 7.30.4
- Windows XP SP3 32-bit
- Windows 7 SP1 64-bit
- Windows 8.1
Supported SoftDevices:
- S110 v8.0.0
- S120 v2.1.0
- S130 v1.0.0
- S210 v5.0.0
- S310 v3.0.0
Supported boards:
- PCA10028
- PCA10031
- Dynastream's N5DK1 (only for ANT examples)
For other devices and boards, see the SDK documentation, section "Using
the SDK with other boards".
Changes:
Drivers and libraries:
New features:
- Ported FreeRTOS to run on nRF51. Added two FreeRTOS examples: one
to run on bare metal and one running a BLE HRS example using the
S110 and S130 SoftDevices.
- Added a TWI transaction manager module for managing access to an
I2C bus. Added an example that uses this module to control two
sensors on the same I2C bus.
- Added an example that shows how to use the TWI driver.
- Added a low-power PWM module (software-controlled low-accuracy
PWM). Added an example that shows how to use this module.
- Added an LED softblink module that uses the low-power PWM. Added
an example that shows how to use this module.
- Ported app_uart to use the UART driver and moved it to the
libraries folder.
- Ported app_gpiote to use the GPIOTE driver.
- Added nrf_log, a logging module that supports printf and that can
use either UART or SEGGER RTT as transport medium.
Fixed issues:
- Mailbox module moved out of serialization.
- Bug fixes in app_timer module.
- App_timer module no longer requires to define the number of
timers used in the application.
- Bug fixes in PWM module.
Changes:
- FIFO library: Extended APIs for multi-byte read and write to the
FIFO.
- Memory Manager module:
- Extended number of block categories to 7 (from 3).
- More RAM-efficient management of memory blocks.
- Added a diagnostic function to help determine the right
configuration needed for the application.
Serialization:
New features:
- Added a command for resetting the connectivity chip.
ANT:
New features:
- Added the following new ANT modules:
- ant_encryption
- ant_key_manager
- ant_search_config
- Extended/changed the following existing ANT modules:
- ant_channel_config
- ant_stack_config
- ant_state_indicator
- Refactored the ANT/ANT+ examples and profiles to make them look more
similar to the BLE profiles and examples:
- The following ANT+ profiles have been extracted and extended:
Bicycle Power (ant_bpwr), Bicycle Speed & Cadence (ant_bsc),
Stride Based Speed & Distance (ant_sdm)
- All ANT+ examples have been refactored to use extracted
profiles.
- All ANT+/ANT examples have been refactored to use created
modules.
- Added three new ANT examples:
- ant_scalable
- ant_scalable_encrypted
- ant_scan_and_forward
BLE:
- Added an experimental module named Peer Manager. This module will
eventually replace the existing Device Manager. The new Peer Manager
improves on the Device Manager in multiple ways, mainly by
supporting concurrent central and peripheral connections.
- Added an experimental flash memory module named Flash Data Storage
(FDS), which greatly reduces the need for time-consuming write and
clear operations. When using FDS, data can be arbitrarily long or
short (within about a page). All pieces of data are tagged with
types, which makes it easy to version data.
- Updated the experimental HRS/RSCS Relay example:
- It now uses the new Peer Manager instead of the Device Manager.
Therefore, it now supports bonding in both central and peripheral
roles.
- It uses the new nrf_log module, which can use SEGGER RTT.
- Removed the app_s130_demo example.
- Added an experimental example supporting the Eddystone beacon
format.
- Added the BLE Connection State module, which keeps track of certain
states of each connection (for example, whether it is encrypted) and
can also keep track of user-defined states.
- Added the Mapped Flags module, which keeps track of flags that are
mapped to keys. It is used by the BLE Connection State module.
- Added ble_gatt_db.h (containing a GATT service structure) and
modified ble_db_discovery module to use it.
BLE Services:
- Updated the Bluetoothds_template application (experimental) to be
compatible with Bluetooth Developer Studio v1.0 and the Nordic
Semiconductor NRF5X v1.1.8 plugin.
- Added three new services:
- Location Navigation Service (experimental)
- Proprietary LED Button Service (experimental)
- Nordic UART Client Service (experimental)
Fixed issues:
- App_pwm occasionally gives inverted signal.
Known issues:
- Device Manager is not supported in multi-role S130 operation.
- Device Manager works in peripheral or central only operation on
S130. This must be decided at compile time.
- The DFU over BLE example has been tested to work with a minimum
connection interval of 11.25 ms. The application cannot handle
connection intervals lower than 11.25 ms and may undergo a system
reset in the middle of a firmware update.
Workaround: If you face unexpected disconnects during the firmware
update process, consider increasing the connection
interval used by the master.
- The old manual procedure for testing buttonless DFU, as specified in
the documentation, can lead to the DFU process hanging or returning
an error when used with Master Control Panel 3.8 and newer.
- Bootloader binaries (.bin files) generated with the GCC makefile
should not be used. Instead, generate the bootloader bin files using
nrfutils, found on GitHub.
========================================================================
mt7688和mt7628资料
mt7688,mt7628,路由器,datasheet,MTK
用VCpp编写USB接口通信程序
window MFC编程下,带有界面的USB与PC通信程序,VC6.0
vc2005程序错误笔记
这些问题经常出现!其实并不是你的真正出现了什么问题,只是你的编译链接的时候编译器自身的问题而已!也许是VS2005 ,VS2008 的BUG吧,解决的方法:点class view中的工程,选右鍵,再点clean就可以了; 或者是 build->clean solusion也可以,就是如此的简单,我本人觉得,还是VS 6.0用着好用,呵呵,可能是怀旧吧!