CentOS7.2 iSCSI服务器端与客户端安装配置

CentOS7.2 iSCSI安装配置

服务器端配置

1. 安装软件

   yum -y install targetcli
   

2. 新建块存储

   fdisk /dev/sdb
   新建/dev/sdb1
   

3. 进入targetcli界面

   > /backstores/block create disk01 /dev/sdb1 #建立块存储disk01
   > /iscsi  create iqn.2018-14.com.iecas.store01:target01 #建立target对象 FQDN域名反写
   > /iscsi/iqn.2018-14.com.iecas.store01:target01/tpg1/acls create iqn.2018-14.com.iecas.worker01:initiator01 #建立ACL允许该主机访问
   > /iscsi/iqn.2018-14.com.iecas.store01:target01/tpg1/luns create /backstores/block/disk01 ## #创建LUN并且和存储设备相关联
   > /iscsi/iqn.2018-14.com.iecas.store01:target01/portals delete 0.0.0.0 3260
   > /iscsi/iqn.2018-14.com.iecas.store01:target01/portals create 192.168.136.139:3260    #配置target监听IP和端口（默认监听0.0.0.0:3260）
   
   （可选）设置用户名和密码
   > /iscsi/iqn.2018-14.com.iecas.store01:target01/tpg1/acls/iqn.2018-14.com.iecas.worker01:initiator01 set userid=test
   > /iscsi/iqn.2018-14.com.iecas.store01:target01/tpg1/acls/iqn.2018-14.com.iecas.worker01:initiator01 set password=test
   
   > exit
   

4. 防火墙设置

   firewall=cmd --permanent --add-port=3260/tcp
   firewall-cmd --reload
   

5. 启动服务

   systemctl start target
   systemctl enable target客