haproxy 必须yum install openssl-devel

一.http://virtuallyhyper.com/2013/05/configure-haproxy-to-load-balance-sites-with-ssl/    

步骤

前提步骤
1.如果要编译最新版本的haproxy，先安装Development Tools group package
    # yum grouplist -v "development" | grep tools
  # yum install @development
2.如果要支持ssl 安全访问，需要安装openssl
  # yum install openssl-devel

正式步骤
1.Compile the Latest Version of HAProxy
//下载:
# wget http://haproxy.1wt.eu/download/1.5/src/devel/haproxy-1.5-dev18.tar.gz

//解压 haproxy:
# tar xzf haproxy-1.5-dev18.tar.gz

//编译:
# cd haproxy-1.5-dev18
# make TARGET=linux26 USE_OPENSSL=1 ADDLIB=-lz
//编译完之后确定关联到openssl 
# ldd haproxy | grep ssl
//安装编译好的binary
# make PREFIX=/usr/local/haproxy install
2.设置配置文件haproxy.cfg配置文件

3.检查配置文件是否ok
# /usr/local/haproxy/sbin/haproxy -c -f /etc/haproxy.cfg

4. 启动haproxy:
# /usr/local/haproxy/sbin/haproxy -f /etc/haproxy.cfg


具体配置参考下面的:
Configure HAProxy to Load Balance Sites With SSL

 04 May 2013  Karim Elatov
 4 Comments
 HAproxy 1