HA FastDFS分布式文件系统部署详细步骤

最新推荐文章于 2024-07-22 17:13:33 发布
最新推荐文章于 2024-07-22 17:13:33 发布
阅读量1.4k 收藏
点赞数
分类专栏： FastDFS FastDFS 文章标签： 如何配置高可用的分布式图片服务器 如何配置HA FastDFS分布式文件系统
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/zhengzizhi/article/details/80491514
版权

本篇文章搭建的分布式图片服务器测试上传的美女图片

（图片文件分别为20160501.jpg  20160502.jpg  20160503.jpg，另外3张20160701.jpg  20160702.jpg  20160703.jpg就自己在网上随便下载几张吧）如下：



apt-get update && apt-get -y install git wget build-essential 

git clone https://github.com/happyfish100/libfastcommon.git
cd libfastcommon
./make.sh
./make.sh install

cd ..
wget https://github.com/happyfish100/fastdfs/archive/V5.11.tar.gz
tar xzf V5.11.tar.gz
cd fastdfs-5.11
./make.sh
./make.sh install


root@contoso21:~/FastDFS# ls /etc/fdfs
client.conf.sample  storage.conf.sample  tracker.conf.sample
root@contoso21:~/FastDFS# cp /etc/fdfs/tracker.conf.sample /etc/fdfs/tracker.conf

root@contoso21:~/FastDFS# sed -i -- 's/^base_path=\/home\/yuqing\/fastdfs/base_path=\/fdfs\/tracker/g'  /etc/fdfs/tracker.conf

root@contoso21:~# mkdir -p /fdfs/tracker
root@contoso21:~# chmod 777 /fdfs/tracker/
root@contoso21:~# /usr/bin/fdfs_trackerd /etc/fdfs/tracker.conf start

root@contoso21:~# find / -name trackerd.log
/fdfs/tracker/logs/trackerd.log
root@contoso21:~# tail -f /fdfs/tracker/logs/trackerd.log

root@contoso21:~# ps -ef | grep 22122
root       7388    752  0 19:15 pts/0    00:00:00 grep 22122
root@contoso21:~# 

root@contoso21:~# ls /usr/bin/ | grep fdfs 
fdfs_appender_test
fdfs_appender_test1
fdfs_append_file
fdfs_crc32
fdfs_delete_file
fdfs_download_file
fdfs_file_info
fdfs_monitor
fdfs_storaged
fdfs_test
fdfs_test1
fdfs_trackerd
fdfs_upload_appender
fdfs_upload_file
root@contoso21:~# 


启动 Tracker： # /etc/init.d/fdfs_trackerd start 
(初次成功启动，会在/fastdfs/tracker 目录下创建 data、logs 两个目录)可以通过以下两个方法查
看 tracker 是否启动成功: 

(1)查看 22122 端口监听情况:netstat -unltp|grep fdfs 
root@contoso22:~/FastDFS# netstat -unltp|grep fdfs
tcp        0      0 0.0.0.0:22122           0.0.0.0:*               LISTEN      7409/fdfs_trackerd
root@contoso22:~/FastDFS#

(2)通过以下命令查看 tracker 的启动日志，看是否有错误 
tail -f  /fdfs/tracker/logs/trackerd.log

关闭 Tracker： 
/etc/init.d/fdfs_trackerd stop 

设置 FastDFS 跟踪器开机启动： 
cat > /etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

## FastDFS Tracker 
/etc/init.d/fdfs_trackerd start 

exit 0


三、配置 FastDFS 存储 ( 192.168.10.23 、192.168.10.24 、192.168.10.25 、192.168.10.26 、192.168.10.27 、192.168.10.28 ) 
1、 复制 FastDFS 存储器样例配置文件,并重命名: 
root@contoso23:~/FastDFS# ls /etc/fdfs
client.conf.sample  storage.conf.sample  tracker.conf.sample
root@contoso23:~/FastDFS# cp /etc/fdfs/storage.conf.sample /etc/fdfs/storage.conf

root@contoso23:~# mkdir -p /fdfs/storage
root@contoso23:~# chmod 777 /fdfs/storage/

2、 编辑存储器样例配置文件（以 group1 中的 storage 节点的 storage.conf 为例） ： # vi /etc/fdfs/storage.conf 
修改的内容如下: 
disabled=false      #启用配置文件 
group_name=group1        #组名（第一组为 group1，第二组为 group2） 
port=23000      #storage 的端口号,同一个组的 storage 端口号必须相同 
base_path=/fdfs/storage   #设置 storage 的日志目录 
store_path0=/fdfs/storage   #存储路径 
store_path_count=1     #存储路径个数，需要和 store_path 个数匹配 
tracker_server=192.168.10.21:22122 #tracker 服务器的 IP 地址和端口 
tracker_server=192.168.10.22:22122 #多个 tracker 直接添加多条配置 
http.server_port=8888    #设置 http 端口号 
（其它参数保留默认配置，具体配置解释请参考官方文档说明： 
http://bbs.chinaunix.net/thread-1941456-1-1.html ）  

root@contoso23:~/FastDFS# cat > /etc/fdfs/storage.conf
# is this config file disabled
# false for enabled
# true for disabled
disabled=false

# the name of the group this storage server belongs to
#
# comment or remove this item for fetching from tracker server,
# in this case, use_storage_id must set to true in tracker.conf,
# and storage_ids.conf must be configed correctly.
group_name=group3

# bind an address of this host
# empty for bind all addresses of this host
bind_addr=

# if bind an address of this host when connect to other servers 
# (this storage server as a client)
# true for binding the address configed by above parameter: "bind_addr"
# false for binding any address of this host
client_bind=true

# the storage server port
port=23000

# connect timeout in seconds
# default value is 30s
connect_timeout=30

# network timeout in seconds
# default value is 30s
network_timeout=60

# heart beat interval in seconds
heart_beat_interval=30

# disk usage report interval in seconds
stat_report_interval=60

# the base path to store data and log files
base_path=/fdfs/storage

# max concurrent connections the server supported
# default value is 256
# more max_connections means more memory will be used
max_connections=256

# the buff size to recv / send data
# this parameter must more than 8KB
# default value is 64KB
# since V2.00
buff_size = 256KB

# accept thread count
# default value is 1
# since V4.07
accept_threads=1

# work thread count, should <= max_connections
# work thread deal network io
# default value is 4
# since V2.00
work_threads=4

# if disk read / write separated
##  false for mixed read and write
##  true for separated read and write
# default value is true
# since V2.00
disk_rw_separated = true

# disk reader thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_reader_threads = 1

# disk writer thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_writer_threads = 1

# when no entry to sync, try read binlog again after X milliseconds
# must > 0, default value is 200ms
sync_wait_msec=50

# after sync a file, usleep milliseconds
# 0 for sync successively (never call usleep)
sync_interval=0

# storage sync start time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_start_time=00:00

# storage sync end time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_end_time=23:59

# write to the mark file after sync N files
# default value is 500
write_mark_file_freq=500

# path(disk or mount point) count, default value is 1
store_path_count=1

# store_path#, based 0, if store_path0 not exists, it's value is base_path
# the paths must be exist
store_path0=/fdfs/storage
#store_path1=/home/yuqing/fastdfs2

# subdir_count  * subdir_count directories will be auto created under each 
# store_path (disk), value can be 1 to 256, default value is 256
subdir_count_per_path=256

# tracker_server can ocur more than once, and tracker_server format is
#  "host:port", host can be hostname or ip address
tracker_server=192.168.10.21:22122
tracker_server=192.168.10.22:22122

#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info

#unix group name to run this program, 
#not set (empty) means run by the group of current user
run_by_group=

#unix username to run this program,
#not set (empty) means run by current user
run_by_user=

# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" (only one asterisk) means match all ip addresses
# we can use CIDR ips like 192.168.5.64/26
# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
# for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
# allow_hosts=192.168.5.64/26
allow_hosts=*

# the mode of the files distributed to the data path
# 0: round robin(default)
# 1: random, distributted by hash code
file_distribute_path_mode=0

# valid when file_distribute_to_path is set to 0 (round robin), 
# when the written file count reaches this number, then rotate to next path
# default value is 100
file_distribute_rotate_count=100

# call fsync to disk when write big file
# 0: never call fsync
# other: call fsync when written bytes >= this bytes
# default value is 0 (never call fsync)
fsync_after_written_bytes=0

# sync log buff to disk every interval seconds
# must > 0, default value is 10 seconds
sync_log_buff_interval=10

# sync binlog buff / cache to disk every interval seconds
# default value is 60 seconds
sync_binlog_buff_interval=10

# sync storage stat info to disk every interval seconds
# default value is 300 seconds
sync_stat_file_interval=300

# thread stack size, should >= 512KB
# default value is 512KB
thread_stack_size=512KB

# the priority as a source server for uploading file.
# the lower this value, the higher its uploading priority.
# default value is 10
upload_priority=10

# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
# multi aliases split by comma. empty value means auto set by OS type
# default values is empty
if_alias_prefix=

# if check file duplicate, when set to true, use FastDHT to store file indexes
# 1 or yes: need check
# 0 or no: do not check
# default value is 0
check_file_duplicate=0

# file signature method for check file duplicate
## hash: four 32 bits hash code
## md5: MD5 signature
# default value is hash
# since V4.01
file_signature_method=hash

# namespace for storing file indexes (key-value pairs)
# this item must be set when check_file_duplicate is true / on
key_namespace=FastDFS

# set keep_alive to 1 to enable persistent connection with FastDHT servers
# default value is 0 (short connection)
keep_alive=0

# you can use "#include filename" (not include double quotes) directive to 
# load FastDHT server list, when the filename is a relative path such as 
# pure filename, the base path is the base path of current/this config file.
# must set FastDHT server list when check_file_duplicate is true / on
# please see INSTALL of FastDHT for detail
##include /home/yuqing/fastdht/conf/fdht_servers.conf

# if log to access log
# default value is false
# since V4.00
use_access_log = false

# if rotate the access log every day
# default value is false
# since V4.00
rotate_access_log = false

# rotate access log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.00
access_log_rotate_time=00:00

# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false

# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time=00:00

# rotate access log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_access_log_size = 0

# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0

# keep days of the log files
# 0 means do not delete old log files
# default value is 0
log_file_keep_days = 0

# if skip the invalid record when sync file
# default value is false
# since V4.02
file_sync_skip_invalid_record=false

# if use connection pool
# default value is false
# since V4.05
use_connection_pool = false

# connections whose the idle time exceeds this time will be closed
# unit: second
# default value is 3600
# since V4.05
connection_pool_max_idle_time = 3600

# use the ip address of this storage server if domain_name is empty,
# else this domain name will ocur in the url redirected by the tracker server
http.domain_name=

# the port of the web server on this storage server
http.server_port=8888

root@contoso23:~/FastDFS# 

3、 创建基础数据目录（参考基础目录 base_path 配置）: 
mkdir -p /fdfs/storage 

4、 防火墙中打开存储器端口（默认为 23000）: # vi /etc/sysconfig/iptables 
添加如下端口行： 
## FastDFS Storage Port 
-A INPUT -m state --state NEW -m tcp -p tcp --dport 23000 -j ACCEPT 
重启防火墙： 
# service iptables restart  


5、 启动 Storage： 
# /etc/init.d/fdfs_storaged start 
（初次成功启动，会在/fdfs/storage 目录下创建数据目录 data 和日志目录 logs） 
各节点启动动，使用 tail -f /fdfs/storage/logs/storaged.log 命令监听存储节点日志，可以
看到存储节点链接到跟踪器，并提示哪一个为 leader 跟踪器。同时也会看到同一组中的其他节点加入
进来的日志信息。  

查看 23000 端口监听情况：netstat -unltp|grep fdfs 

所有 Storage 节点都启动之后，可以在任一 Storage 节点上使用如下命令查看集群信息： 
# /usr/bin/fdfs_monitor /etc/fdfs/storage.conf  

可以看到存储节点状态为 ACTIVE 则可 

6、 关闭 Storage： 
# /etc/init.d/fdfs_storaged stop  
7、 设置 FastDFS 存储器开机启动： 
cat > /etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

## FastDFS Storage 
/etc/init.d/fdfs_storaged start 

exit 0



四、文件上传测试 ( 192.168.10.21 ) 
1、修改 Tracker 服务器中的客户端配置文件： 
在机器root@contoso21:~#和root@contoso22:~#上执行指令 find / -name client.conf.sample
/etc/fdfs/client.conf.sample
在机器root@contoso21:~#和root@contoso22:~#上执行指令 cp /etc/fdfs/client.conf.sample /etc/fdfs/client.conf
 
在机器root@contoso21:~#和root@contoso22:~#上执行指令 vi /etc/fdfs/client.conf 
base_path=/fdfs/tracker 
tracker_server=192.168.10.21:22122 
tracker_server=192.168.10.22:22122  
2、执行如下文件上传命令：
在机器root@contoso21:~#和root@contoso22:~#上执行指令 ls /usr/bin/ | grep fdfs 
fdfs_appender_test
fdfs_appender_test1
fdfs_append_file
fdfs_crc32
fdfs_delete_file
fdfs_download_file
fdfs_file_info
fdfs_monitor
fdfs_storaged
fdfs_test
fdfs_test1
fdfs_trackerd
fdfs_upload_appender
fdfs_upload_file

在机器root@contoso21:~#和root@contoso22:~#上执行指令 apt-get -y install lrzsz  
在机器root@contoso21:~#和root@contoso22:~#上执行指令 cd /opt	# 将测试图片从Windows 10 系统上传到此目录
root@contoso21:/opt# ls
20160501.jpg  20160502.jpg  20160503.jpg
root@contoso22:/opt# ls
20160701.jpg  20160702.jpg  20160703.jpg
在机器root@contoso21:~#上执行指令 /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160501.jpg
在机器root@contoso21:~#上执行指令 /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160502.jpg
在机器root@contoso21:~#上执行指令 /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160503.jpg

在机器root@contoso22:~#上执行指令 /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160701.jpg
在机器root@contoso22:~#上执行指令 /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160702.jpg
在机器root@contoso22:~#上执行指令 /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160703.jpg

返回 ID 号： 
root@contoso21:/opt# ls
20160501.jpg  20160502.jpg  20160503.jpg
root@contoso21:/opt# /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160501.jpg
group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
root@contoso21:/opt# /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160502.jpg
group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
root@contoso21:/opt# /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160503.jpg
group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
root@contoso21:/opt# 
（能返回以上文件 ID，说明文件上传成功）

返回 ID 号：
root@contoso22:/opt# ls
20160701.jpg  20160702.jpg  20160703.jpg
root@contoso22:/opt# /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160701.jpg
group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
root@contoso22:/opt# /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160702.jpg
group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
root@contoso22:/opt# /usr/bin/fdfs_upload_file /etc/fdfs/client.conf /opt/20160703.jpg
group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg
root@contoso22:/opt# 
（能返回以上文件 ID，说明文件上传成功）



六、在各存储节点（192.168.10.23、192.168.10.24、192.168.10.25、192.168.10.26、192.168.10.27、192.168.10.28）上安装 Nginx 
1、fastdfs-nginx-module 作用说明 
FastDFS 通过 Tracker 服务器,将文件放在 Storage 服务器存储，但是同组存储服务器之间需要进入
文件复制，有同步延迟的问题。假设 Tracker 服务器将文件上传到了 192.168.10.23，上传成功后文件 ID
已经返回给客户端。此时 FastDFS 存储集群机制会将这个文件同步到同组存储 192.168.10.24，在文件还
没有复制完成的情况下，客户端如果用这个文件 ID 在 192.168.10.24 上取文件,就会出现文件无法访问的
错误。而 fastdfs-nginx-module 可以重定向文件连接到源服务器取文件,避免客户端由于复制延迟导致的
文件无法访问错误。（解压后的 fastdfs-nginx-module 在 nginx 安装时使用）
安装说明https://github.com/happyfish100/fastdfs-nginx-module/blob/master/INSTALL

 2、下载 fastdfs-nginx-module_v1.16.tar.gz 到root@contoso23:~# 、root@contoso24:~#、root@contoso25:~#、root@contoso26:~#、 root@contoso27:~#和root@contoso28:~# 
git clone https://github.com/happyfish100/fastdfs-nginx-module.git


3、安装编译 Nginx 所需的依赖包 
apt-get update && apt-get -y install libtool libpcre3 libpcre3-dev zlib1g-dev openssl libssl-dev
 
4、编译安装 Nginx（添加 fastdfs-nginx-module 模块）
wget http://nginx.org/download/nginx-1.8.1.tar.gz
tar -zxvf nginx-1.8.1.tar.gz
cd nginx-1.8.1
./configure --prefix=/usr/local/nginx --add-module=/root/fastdfs-nginx-module/src 
make && make install

7、复制 fastdfs-nginx-module 源码中的配置文件到/etc/fdfs 目录，并修改 
# cp /root/fastdfs-nginx-module/src/mod_fastdfs.conf /etc/fdfs/ 
 # vi /etc/fdfs/mod_fastdfs.conf 
(1)第一组 Storage 的 mod_fastdfs.conf 配置如下： 
connect_timeout=10 
base_path=/tmp 
tracker_server=192.168.10.21:22122 
tracker_server=192.168.10.22:22122 
 storage_server_port=23000 
group_name=group1  
url_have_group_name = true 
store_path0=/fdfs/storage 
group_count = 2 
[group1] 
group_name=group1 
storage_server_port=23000 
store_path_count=1 
store_path0=/fastdfs/storage 
[group2] 
group_name=group2 
storage_server_port=23000 
store_path_count=1 
store_path0=/fastdfs/storage  

root@contoso23:~/nginx-1.8.1# cat > /etc/fdfs/mod_fastdfs.conf
# connect timeout in seconds
# default value is 30s
connect_timeout=30

# network recv and send timeout in seconds
# default value is 30s
network_timeout=30

# the base path to store log files
base_path=/tmp

# if load FastDFS parameters from tracker server
# since V1.12
# default value is false
load_fdfs_parameters_from_tracker=true

# storage sync file max delay seconds
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# since V1.12
# default value is 86400 seconds (one day)
storage_sync_file_max_delay = 86400

# if use storage ID instead of IP address
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# default value is false
# since V1.13
use_storage_id = false

# specify storage ids filename, can use relative or absolute path
# same as tracker.conf
# valid only when load_fdfs_parameters_from_tracker is false
# since V1.13
storage_ids_filename = storage_ids.conf

# FastDFS tracker_server can ocur more than once, and tracker_server format is
#  "host:port", host can be hostname or ip address
# valid only when load_fdfs_parameters_from_tracker is true
tracker_server=192.168.10.21:22122 
tracker_server=192.168.10.22:22122

# the port of the local storage server
# the default value is 23000
storage_server_port=23000

# the group name of the local storage server
group_name=group3

# if the url / uri including the group name
# set to false when uri like /M00/00/00/xxx
# set to true when uri like ${group_name}/M00/00/00/xxx, such as group1/M00/xxx
# default value is false
url_have_group_name = true

# path(disk or mount point) count, default value is 1
# must same as storage.conf
store_path_count=1

# store_path#, based 0, if store_path0 not exists, it's value is base_path
# the paths must be exist
# must same as storage.conf
store_path0=/fdfs/storage
#store_path1=/home/yuqing/fastdfs1

# standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info

# set the log filename, such as /usr/local/apache2/logs/mod_fastdfs.log
# empty for output to stderr (apache and nginx error_log file)
log_filename=

# response mode when the file not exist in the local file system
## proxy: get the content from other storage server, then send to client
## redirect: redirect to the original storage server (HTTP Header is Location)
response_mode=proxy

# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
# multi aliases split by comma. empty value means auto set by OS type
# this paramter used to get all ip address of the local host
# default values is empty
if_alias_prefix=

# use "#include" directive to include HTTP config file
# NOTE: #include is an include directive, do NOT remove the # before include
#include http.conf


# if support flv
# default value is false
# since v1.15
flv_support = true

# flv file extension name
# default value is flv
# since v1.15
flv_extension = flv


# set the group count
# set to none zero to support multi-group
# set to 0  for single group only
# groups settings section as [group1], [group2], ..., [groupN]
# default value is 0
# since v1.14
group_count = 3

# group settings for group #1
# since v1.14
# when support multi-group, uncomment following section
[group1]
group_name=group1
storage_server_port=23000
store_path_count=1
store_path0=/fdfs/storage
#store_path1=/home/yuqing/fastdfs1

# group settings for group #2
# since v1.14
# when support multi-group, uncomment following section as neccessary
[group2]
group_name=group2
storage_server_port=23000
store_path_count=1
store_path0=/fdfs/storage

# group settings for group #2
# since v1.14
# when support multi-group, uncomment following section as neccessary
[group3]
group_name=group3
storage_server_port=23000
store_path_count=1
store_path0=/fdfs/storage

root@contoso23:~/nginx-1.8.1# 

(2)第二组 Storage 的 mod_fastdfs.conf 配置与第一组配置只有 group_name 不同： 
group_name=group2  
8、复制 FastDFS 的部分配置文件到/etc/fdfs 目录 
root@contoso23:~/nginx-1.8.1# ls /etc/fdfs
client.conf.sample  mod_fastdfs.conf  storage.conf  storage.conf.sample  tracker.conf.sample
root@contoso23:~/nginx-1.8.1# ls /root/FastDFS/conf/
anti-steal.jpg  client.conf  http.conf  mime.types  storage.conf  storage_ids.conf  tracker.conf
root@contoso23:~/nginx-1.8.1# cp /root/FastDFS/conf/http.conf /root/FastDFS/conf/mime.types /etc/fdfs
root@contoso23:~/nginx-1.8.1# ls /etc/fdfs
client.conf.sample  mime.types        storage.conf         tracker.conf.sample
http.conf           mod_fastdfs.conf  storage.conf.sample
root@contoso23:~/nginx-1.8.1# 

9、在/fdfs/storage 文件存储目录下创建软连接,将其链接到实际存放数据的目录 
 # ln -s /fdfs/storage/data/ /fdfs/storage/data/M00  
10、配置 Nginx，简洁版 nginx 配置样例：
cat > /usr/local/nginx/conf/nginx.conf  
user  root; 
worker_processes  1; 
events { 
    worker_connections  1024; 
} 
http { 
    include       mime.types; 
    default_type  application/octet-stream; 
    sendfile        on; 
    keepalive_timeout  65; 
    server { 
        listen       8888; 
        server_name  localhost; 
        location ~/group([0-9])/M00 { 
            #alias /fdfs/storage/data; 
            ngx_fastdfs_module; 
        } 
        error_page   500 502 503 504  /50x.html; 
        location = /50x.html { 
            root   html; 
        } 
    } 
} 
注意、说明： 
A、8888 端口值是要与/etc/fdfs/storage.conf 中的 http.server_port=8888 相对应， 
因为 http.server_port 默认为 8888,如果想改成 80，则要对应修改过来。 
B、Storage 对应有多个 group 的情况下，访问路径带 group 名，如/group1/M00/00/00/xxx， 
对应的 Nginx 配置为： 
location ~/group([0-9])/M00 { 
  ngx_fastdfs_module; 
} 
C、如查下载时如发现老报 404，将 nginx.conf 第一行 user nobody 修改为 user root 后重新启动。  
11、防火墙中打开 Nginx 的 8888 端口 
 # vi /etc/sysconfig/iptables 
 添加： 
 ## Nginx Port 
-A INPUT -m state --state NEW -m tcp -p tcp --dport 8888 -j ACCEPT 
重启防火墙: # service iptables restart 

12、启动 Nginx 
# /usr/local/nginx/sbin/nginx 
ngx_http_fastdfs_set pid=xxx 
（重启 Nginx 的命令为：/usr/local/nginx/sbin/nginx -s reload） 
设置 Nginx 开机启动 ,加入： /usr/local/nginx/sbin/nginx

cat > /etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

## FastDFS Storage 
/etc/init.d/fdfs_storaged start 

## Start Nginx
/usr/local/nginx/sbin/nginx
exit 0

root@contoso23:~# netstat -unltp|grep nginx
tcp        0      0 0.0.0.0:8888            0.0.0.0:*               LISTEN      501/nginx       
root@contoso23:~#
  
13、通过浏览器访问测试上传的文件 
group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.23:8888/group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.23:8888/group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.23:8888/group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.23:8888/group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.23:8888/group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.23:8888/group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.23:8888/group2/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.23:8888/group2/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.23:8888/group2/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.23:8888/group2/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.23:8888/group2/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.23:8888/group2/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.23:8888/group3/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.23:8888/group3/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.23:8888/group3/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.23:8888/group3/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.23:8888/group3/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.23:8888/group3/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg
 
http://192.168.10.24:8888/group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.24:8888/group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.24:8888/group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.24:8888/group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.24:8888/group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.24:8888/group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.24:8888/group2/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.24:8888/group2/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.24:8888/group2/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.24:8888/group2/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.24:8888/group2/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.24:8888/group2/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.24:8888/group3/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.24:8888/group3/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.24:8888/group3/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.24:8888/group3/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.24:8888/group3/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.24:8888/group3/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.25:8888/group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.25:8888/group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.25:8888/group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.25:8888/group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.25:8888/group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.25:8888/group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.25:8888/group2/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.25:8888/group2/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.25:8888/group2/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.25:8888/group2/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.25:8888/group2/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.25:8888/group2/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.25:8888/group3/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.25:8888/group3/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.25:8888/group3/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.25:8888/group3/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.25:8888/group3/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.25:8888/group3/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.26:8888/group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.26:8888/group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.26:8888/group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.26:8888/group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.26:8888/group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.26:8888/group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.26:8888/group2/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.26:8888/group2/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.26:8888/group2/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.26:8888/group2/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.26:8888/group2/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.26:8888/group2/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.26:8888/group3/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.26:8888/group3/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.26:8888/group3/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.26:8888/group3/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.26:8888/group3/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.26:8888/group3/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.27:8888/group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.27:8888/group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.27:8888/group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.27:8888/group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.27:8888/group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.27:8888/group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.27:8888/group2/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.27:8888/group2/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.27:8888/group2/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.27:8888/group2/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.27:8888/group2/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.27:8888/group2/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.27:8888/group3/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.27:8888/group3/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.27:8888/group3/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.27:8888/group3/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.27:8888/group3/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.27:8888/group3/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg


http://192.168.10.28:8888/group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.28:8888/group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.28:8888/group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.28:8888/group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.28:8888/group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.28:8888/group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.28:8888/group2/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.28:8888/group2/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.28:8888/group2/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.28:8888/group2/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.28:8888/group2/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.28:8888/group2/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.28:8888/group3/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.28:8888/group3/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.28:8888/group3/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.28:8888/group3/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.28:8888/group3/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.28:8888/group3/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg


七、在跟踪器节点（192.168.10.21、192.168.10.22）上安装 Nginx 
1、在 tracker 上安装的 nginx 主要为了提供 http 访问的反向代理、负载均衡以及缓存服务。  
2、安装编译 Nginx 所需的依赖包
apt-get update && apt-get -y install libtool libpcre3 libpcre3-dev zlib1g-dev openssl libssl-dev

3、下载ngx_cache_purge-2.3.tar.gz到/root,解压
wget http://labs.frickle.com/files/ngx_cache_purge-2.3.tar.gz
tar -zxvf ngx_cache_purge-2.3.tar.gz 
 
5、编译安装 Nginx（添加 fastdfs-nginx-module 模块）
wget http://nginx.org/download/nginx-1.8.1.tar.gz
tar -zxvf nginx-1.8.1.tar.gz
cd nginx-1.8.1
./configure --prefix=/usr/local/nginx --add-module=/root/ngx_cache_purge-2.3 
make && make install

6、配置 Nginx，设置负载均衡以及缓存 
# cat > /usr/local/nginx/conf/nginx.conf 
user  root; 
worker_processes  1;  
#error_log  logs/error.log; 
#error_log  logs/error.log  notice; 
#error_log  logs/error.log  info;
#pid        logs/nginx.pid;  
events { 
worker_connections  1024; 
use epoll; 
}  
http { 
    include       mime.types; 
    default_type  application/octet-stream;  
    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" ' 
    #                  '$status $body_bytes_sent "$http_referer" ' 
    #                  '"$http_user_agent" "$http_x_forwarded_for"';  
    #access_log  logs/access.log  main;  
    sendfile        on; 
    tcp_nopush     on;  
    #keepalive_timeout  0; 
    keepalive_timeout  65;  
    #gzip  on; 
    #设置缓存 
    server_names_hash_bucket_size 128; 
    client_header_buffer_size 32k; 
    large_client_header_buffers 4 32k; 
    client_max_body_size 300m; 
  
    proxy_redirect off; 
    proxy_set_header Host $http_host; 
    proxy_set_header X-Real-IP $remote_addr; 
    proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; 
    proxy_connect_timeout 90; 
    proxy_send_timeout 90; 
    proxy_read_timeout 90; 
    proxy_buffer_size 16k; 
    proxy_buffers 4 64k; 
    proxy_busy_buffers_size 128k; 
    proxy_temp_file_write_size 128k; 
    #设置缓存存储路径、存储方式、分配内存大小、磁盘最大空间、缓存期限 
    proxy_cache_path /fdfs/cache/nginx/proxy_cache levels=1:2 
    keys_zone=http-cache:200m max_size=1g inactive=30d; 
    proxy_temp_path /fdfs/cache/nginx/proxy_cache/tmp; 
    #设置 group1 的服务器 
    upstream fdfs_group1 { 
         server 192.168.10.23:8888 weight=1 max_fails=2 fail_timeout=30s; 
         server 192.168.10.24:8888 weight=1 max_fails=2 fail_timeout=30s; 
    } 
    #设置 group2 的服务器 
    upstream fdfs_group2 { 
         server 192.168.10.25:8888 weight=1 max_fails=2 fail_timeout=30s; 
         server 192.168.10.26:8888 weight=1 max_fails=2 fail_timeout=30s; 
    }
    #设置 group3 的服务器 
    upstream fdfs_group3 { 
         server 192.168.10.27:8888 weight=1 max_fails=2 fail_timeout=30s; 
         server 192.168.10.28:8888 weight=1 max_fails=2 fail_timeout=30s; 
    }  
    server { 
        listen       8000; 
        server_name  localhost;  
        #charset koi8-r;  
        #access_log  logs/host.access.log  main; 
        #设置 group 的负载均衡参数 
        location /group1/M00 { 
            proxy_next_upstream http_502 http_504 error timeout invalid_header; 
            proxy_cache http-cache; 
            proxy_cache_valid  200 304 12h; 
            proxy_cache_key $uri$is_args$args; 
            proxy_pass http://fdfs_group1; 
            expires 30d; 
        } 
        location /group2/M00 { 
            proxy_next_upstream http_502 http_504 error timeout invalid_header; 
            proxy_cache http-cache; 
            proxy_cache_valid  200 304 12h; 
            proxy_cache_key $uri$is_args$args; 
            proxy_pass http://fdfs_group2; 
            expires 30d; 
        }
        location /group3/M00 { 
            proxy_next_upstream http_502 http_504 error timeout invalid_header; 
            proxy_cache http-cache; 
            proxy_cache_valid  200 304 12h; 
            proxy_cache_key $uri$is_args$args; 
            proxy_pass http://fdfs_group3; 
            expires 30d; 
        }   
       #设置清除缓存的访问权限 
        location ~/purge(/.*) { 
            allow 127.0.0.1; 
            allow 192.168.10.0/24; 
            deny all; 
            proxy_cache_purge http-cache $1$is_args$args; 
        }
 	#error_page  404              /404.html;  
        # redirect server error pages to the static page /50x.html 
        # 
        error_page   500 502 503 504  /50x.html; 
        location = /50x.html { 
            root   html; 
        } 
    } 
}


按以上 nginx 配置文件的要求，创建对应的缓存目录： 
# mkdir -p /fdfs/cache/nginx/proxy_cache 
# mkdir -p /fdfs/cache/nginx/proxy_cache/tmp  
7、系统防火墙打开对应的端口 
# vi /etc/sysconfig/iptables 
## Nginx 
-A INPUT -m state --state NEW -m tcp -p tcp --dport 8000 -j ACCEPT 
# service iptables restart  
8、启动 Nginx 
# /usr/local/nginx/sbin/nginx 
重启 Nginx 
# /usr/local/nginx/sbin/nginx -s reload 
设置 Nginx 开机启动 /etc/rc.local 加入：/usr/local/nginx/sbin/nginx

cat > /etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

## FastDFS Tracker 
/etc/init.d/fdfs_trackerd start 

## start Nginx
/usr/local/nginx/sbin/nginx

exit 0


root@contoso21:~# netstat -unltp|grep nginx
tcp        0      0 0.0.0.0:8000            0.0.0.0:*               LISTEN      499/nginx       
root@contoso21:~# 


group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg
现在可以通过 Tracker 中的 Nginx 来进行访问 
(1)通过 Tracker1 中的 Nginx 来访问 
http://192.168.10.21:8000/group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg 
http://192.168.10.21:8000/group2/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.21:8000/group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg 
http://192.168.10.21:8000/group2/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.21:8000/group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg 
http://192.168.10.21:8000/group2/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.21:8000/group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg 
http://192.168.10.21:8000/group2/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.21:8000/group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg 
http://192.168.10.21:8000/group2/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.21:8000/group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg 
http://192.168.10.21:8000/group2/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg
(2)通过 Tracker2 中的 Nginx 来访问 
http://192.168.10.22:8000/group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg 
http://192.168.10.22:8000/group2/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.22:8000/group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg 
http://192.168.10.22:8000/group2/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.22:8000/group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg 
http://192.168.10.22:8000/group2/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.22:8000/group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg 
http://192.168.10.22:8000/group2/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.22:8000/group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg 
http://192.168.10.22:8000/group2/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.22:8000/group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg 
http://192.168.10.22:8000/group2/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg
由上面的文件访问效果可以看到，每一个 Tracker 中的 Nginx 都单独对后端的 Storage 组做了负载均衡，
但整套 FastDFS 集群如果想对外提供统一的文件访问地址，还需要对两个 Tracker 中的 Nginx 进行 HA 集
群。

八、使用 Keepalived + Nginx 组成的高可用负载均衡集群做两个 Tracker 节点中 Nginx 的负载均衡 

1、 《Dubbo 视频教程--高可用架构篇--第 08 节--Keepalived+Nginx 实现高可用负载均衡》 

2、在 Keepalived+Nginx 实现高可用负载均衡集群中配置 Tracker 节点中 Nginx 的负载均衡反向代理 
(192.168.10.31 和 192.168.10.32 中的 Nginx 执行相同的配置) 


cat > /etc/nginx/nginx.conf
user  root; 
worker_processes  1; 
#error_log  logs/error.log; 
#error_log  logs/error.log  notice; 
#error_log  logs/error.log  info; 
#pid        logs/nginx.pid; 
events { 
    worker_connections  1024; 
} 
http { 
    include       mime.types; 
    default_type  application/octet-stream; 
    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" ' 
    #                  '$status $body_bytes_sent "$http_referer" ' 
    #                  '"$http_user_agent" "$http_x_forwarded_for"'; 
    #access_log  logs/access.log  main; 
    sendfile        on; 
    #tcp_nopush     on; 
    #keepalive_timeout  0; 
    keepalive_timeout  65; 
    #gzip  on;  
    ## FastDFS Tracker Proxy 
    upstream fastdfs_tracker { 
         server 192.168.10.21:8000 weight=1 max_fails=2 fail_timeout=30s; 
         server 192.168.10.22:8000 weight=1 max_fails=2 fail_timeout=30s; 
    }  
    server { 
        listen       88; 
        server_name  localhost; 
        #charset koi8-r; 
        #access_log  logs/host.access.log  main; 
        location / { 
            root   html; 
            index  index.html index.htm; 
        } 
        #error_page  404              /404.html; 
        # redirect server error pages to the static page /50x.html 
        error_page   500 502 503 504  /50x.html; 
        location = /50x.html { 
            root   html; 
        } 
        ## FastDFS Proxy 
        location /dfs { 
            root   html; 
            index  index.html index.htm; 
            proxy_pass  http://fastdfs_tracker/; 
            proxy_set_header Host  $http_host; 
            proxy_set_header Cookie $http_cookie; 
            proxy_set_header X-Real-IP $remote_addr; 
            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; 
            proxy_set_header X-Forwarded-Proto $scheme; 
            client_max_body_size  300m; 
        } 
    } 
} 




root@contoso31:~# cat > /etc/hosts
127.0.0.1       localhost
127.0.1.1       contoso31.com   contoso31
192.168.10.31   contoso31.com   contoso31



cat > /etc/keepalived/keepalived.conf
global_defs {
notification_email {
        14588019@qq.com
   }

   notification_email_from 14588019@qq.com
   smtp_server smtp.qq.com
   smtp_connect_timeout 30
   router_id contoso31.com

}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 101
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.10.100
    }
}


root@contoso32:~# cat > /etc/hosts
127.0.0.1       localhost
127.0.1.1       contoso32.com   contoso32
192.168.10.32   contoso32.com   contoso32



cat > /etc/keepalived/keepalived.conf
global_defs {
notification_email {
       14588019@qq.com
   }

   notification_email_from 14588019@qq.com
   smtp_server smtp.qq.com
   smtp_connect_timeout 30
   router_id contoso32.com

}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.10.100
    }
}




root@contoso32:~# cat > /etc/hosts
127.0.0.1       localhost
127.0.1.1       contoso32.com   contoso32
192.168.10.32   contoso32.com   contoso32
root@contoso32:~# cat > /etc/keepalived/keepalived.conf
global_defs {
notification_email {
       14588019@qq.com
   }

   notification_email_from 14588019@qq.com
   smtp_server smtp.qq.com
   smtp_connect_timeout 30
   router_id contoso32.com

}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.10.100
    }
}


root@contoso31:~# cat > /etc/hosts
127.0.0.1       localhost
127.0.1.1       contoso31.com   contoso31
192.168.10.31   contoso31.com   contoso31
root@contoso31:~# cat > /etc/keepalived/keepalived.conf
global_defs {
notification_email {
        14588019@qq.com
   }

   notification_email_from 14588019@qq.com
   smtp_server smtp.qq.com
   smtp_connect_timeout 30
   router_id contoso31.com

}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 51
    priority 101
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.10.100
    }
}

root@contoso31:~# cat > /etc/nginx/nginx.conf
user  root; 
worker_processes  1; 
#error_log  logs/error.log; 
#error_log  logs/error.log  notice; 
#error_log  logs/error.log  info; 
#pid        logs/nginx.pid; 
events { 
    worker_connections  1024; 
} 
http { 
    include       mime.types; 
    default_type  application/octet-stream; 
    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" ' 
    #                  '$status $body_bytes_sent "$http_referer" ' 
    #                  '"$http_user_agent" "$http_x_forwarded_for"'; 
    #access_log  logs/access.log  main; 
    sendfile        on; 
    #tcp_nopush     on; 
    #keepalive_timeout  0; 
    keepalive_timeout  65; 
    #gzip  on;  
    ## FastDFS Tracker Proxy 
    upstream fastdfs_tracker { 
         server 192.168.10.21:8000 weight=1 max_fails=2 fail_timeout=30s; 
         server 192.168.10.22:8000 weight=1 max_fails=2 fail_timeout=30s; 
    }  
    server { 
        listen       88; 
        server_name  localhost; 
        #charset koi8-r; 
        #access_log  logs/host.access.log  main; 
        location / { 
            root   html; 
            index  index.html index.htm; 
        } 
        #error_page  404              /404.html; 
        # redirect server error pages to the static page /50x.html 
        error_page   500 502 503 504  /50x.html; 
        location = /50x.html { 
            root   html; 
        } 
        ## FastDFS Proxy 
        location /dfs { 
            root   html; 
            index  index.html index.htm; 
            proxy_pass  http://fastdfs_tracker/; 
            proxy_set_header Host  $http_host; 
            proxy_set_header Cookie $http_cookie; 
            proxy_set_header X-Real-IP $remote_addr; 
            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; 
            proxy_set_header X-Forwarded-Proto $scheme; 
            client_max_body_size  300m; 
        } 
    } 
} 



root@contoso31:~# systemctl enable keepalived
Synchronizing state for keepalived.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d keepalived defaults
Executing /usr/sbin/update-rc.d keepalived enable
root@contoso31:~# systemctl restart keepalived
root@contoso31:~# systemctl status keepalived
鈼[0m keepalived.service - LSB: Starts keepalived
   Loaded: loaded (/etc/init.d/keepalived)
   Active: active (running) since Wed 2016-06-08 00:59:20 CST; 8s ago
  Process: 1852 ExecStop=/etc/init.d/keepalived stop (code=exited, status=0/SUCCESS)
  Process: 1857 ExecStart=/etc/init.d/keepalived start (code=exited, status=0/SUCCESS)
   CGroup: /system.slice/keepalived.service
           鈹溾攢1860 /usr/sbin/keepalived
           鈹溾攢1861 /usr/sbin/keepalived
           鈹斺攢1862 /usr/sbin/keepalived

Jun 08 00:59:20 contoso31 Keepalived_vrrp[1862]: Opening file '/etc/keepalived/keepalived.conf'.
Jun 08 00:59:20 contoso31 Keepalived_vrrp[1862]: Configuration is using : 62874 Bytes
Jun 08 00:59:20 contoso31 Keepalived_vrrp[1862]: Using LinkWatch kernel netlink reflector...
Jun 08 00:59:20 contoso31 Keepalived_healthcheckers[1861]: Registering Kernel netlink reflector
Jun 08 00:59:20 contoso31 Keepalived_healthcheckers[1861]: Registering Kernel netlink command channel
Jun 08 00:59:20 contoso31 Keepalived_healthcheckers[1861]: Opening file '/etc/keepalived/keepalived.conf'.
Jun 08 00:59:20 contoso31 Keepalived_healthcheckers[1861]: Configuration is using : 7417 Bytes
Jun 08 00:59:20 contoso31 Keepalived_healthcheckers[1861]: Using LinkWatch kernel netlink reflector...
Jun 08 00:59:21 contoso31 Keepalived_vrrp[1862]: VRRP_Instance(VI_1) Transition to MASTER STATE
Jun 08 00:59:22 contoso31 Keepalived_vrrp[1862]: VRRP_Instance(VI_1) Entering MASTER STATE
root@contoso31:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:5f:09:8d brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.31/24 brd 192.168.10.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet 192.168.10.100/32 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe5f:98d/64 scope link 
       valid_lft forever preferred_lft forever
root@contoso31:~# 



root@contoso32:~# cat > /etc/nginx/nginx.conf
user  root; 
worker_processes  1; 
#error_log  logs/error.log; 
#error_log  logs/error.log  notice; 
#error_log  logs/error.log  info; 
#pid        logs/nginx.pid; 
events { 
    worker_connections  1024; 
} 
http { 
    include       mime.types; 
    default_type  application/octet-stream; 
    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" ' 
    #                  '$status $body_bytes_sent "$http_referer" ' 
    #                  '"$http_user_agent" "$http_x_forwarded_for"'; 
    #access_log  logs/access.log  main; 
    sendfile        on; 
    #tcp_nopush     on; 
    #keepalive_timeout  0; 
    keepalive_timeout  65; 
    #gzip  on;  
    ## FastDFS Tracker Proxy 
    upstream fastdfs_tracker { 
         server 192.168.10.21:8000 weight=1 max_fails=2 fail_timeout=30s; 
         server 192.168.10.22:8000 weight=1 max_fails=2 fail_timeout=30s; 
    }  
    server { 
        listen       88; 
        server_name  localhost; 
        #charset koi8-r; 
        #access_log  logs/host.access.log  main; 
        location / { 
            root   html; 
            index  index.html index.htm; 
        } 
        #error_page  404              /404.html; 
        # redirect server error pages to the static page /50x.html 
        error_page   500 502 503 504  /50x.html; 
        location = /50x.html { 
            root   html; 
        } 
        ## FastDFS Proxy 
        location /dfs { 
            root   html; 
            index  index.html index.htm; 
            proxy_pass  http://fastdfs_tracker/; 
            proxy_set_header Host  $http_host; 
            proxy_set_header Cookie $http_cookie; 
            proxy_set_header X-Real-IP $remote_addr; 
            proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; 
            proxy_set_header X-Forwarded-Proto $scheme; 
            client_max_body_size  300m; 
        } 
    } 
} 

root@contoso32:~# systemctl enable keepalived
Synchronizing state for keepalived.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d keepalived defaults
Executing /usr/sbin/update-rc.d keepalived enable
root@contoso32:~# systemctl restart keepalived
root@contoso32:~# systemctl status keepalived
鈼[0m keepalived.service - LSB: Starts keepalived
   Loaded: loaded (/etc/init.d/keepalived)
   Active: active (running) since Wed 2016-06-08 00:59:47 CST; 9s ago
  Process: 1853 ExecStop=/etc/init.d/keepalived stop (code=exited, status=0/SUCCESS)
  Process: 1858 ExecStart=/etc/init.d/keepalived start (code=exited, status=0/SUCCESS)
   CGroup: /system.slice/keepalived.service
           鈹溾攢1861 /usr/sbin/keepalived
           鈹溾攢1862 /usr/sbin/keepalived
           鈹斺攢1863 /usr/sbin/keepalived

Jun 08 00:59:47 contoso32 Keepalived_vrrp[1863]: Opening file '/etc/keepalived/keepalived.conf'.
Jun 08 00:59:47 contoso32 Keepalived_vrrp[1863]: Configuration is using : 62872 Bytes
Jun 08 00:59:47 contoso32 Keepalived_vrrp[1863]: Using LinkWatch kernel netlink reflector...
Jun 08 00:59:47 contoso32 Keepalived_vrrp[1863]: VRRP_Instance(VI_1) Entering BACKUP STATE
Jun 08 00:59:47 contoso32 keepalived[1858]: Starting keepalived: keepalived.
Jun 08 00:59:47 contoso32 Keepalived_healthcheckers[1862]: Registering Kernel netlink reflector
Jun 08 00:59:47 contoso32 Keepalived_healthcheckers[1862]: Registering Kernel netlink command channel
Jun 08 00:59:47 contoso32 Keepalived_healthcheckers[1862]: Opening file '/etc/keepalived/keepalived.conf'.
Jun 08 00:59:47 contoso32 Keepalived_healthcheckers[1862]: Configuration is using : 7415 Bytes
Jun 08 00:59:47 contoso32 Keepalived_healthcheckers[1862]: Using LinkWatch kernel netlink reflector...
root@contoso32:~# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:df:e5:e2 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.32/24 brd 192.168.10.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fedf:e5e2/64 scope link 
       valid_lft forever preferred_lft forever
root@contoso32:~# 


root@contoso31:~# systemctl enable nginx
Synchronizing state for nginx.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d nginx defaults
Executing /usr/sbin/update-rc.d nginx enable
root@contoso31:~# systemctl restart nginx
root@contoso31:~# systemctl status nginx
鈼[0m nginx.service - A high performance web server and a reverse proxy server
   Loaded: loaded (/lib/systemd/system/nginx.service; enabled)
   Active: active (running) since Wed 2016-06-08 01:02:20 CST; 7s ago
  Process: 1916 ExecStop=/sbin/start-stop-daemon --quiet --stop --retry QUIT/5 --pidfile /run/nginx.pid (code=exited, status=0/SUCCESS)
  Process: 1921 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
  Process: 1919 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
 Main PID: 1924 (nginx)
   CGroup: /system.slice/nginx.service
           鈹溾攢1924 nginx: master process /usr/sbin/nginx -g daemon on; master_process on;
           鈹斺攢1925 nginx: worker process
root@contoso31:~#   



root@contoso32:~# systemctl enable nginx
Synchronizing state for nginx.service with sysvinit using update-rc.d...
Executing /usr/sbin/update-rc.d nginx defaults
Executing /usr/sbin/update-rc.d nginx enable
root@contoso32:~# systemctl restart nginx
root@contoso32:~# systemctl status nginx
鈼[0m nginx.service - A high performance web server and a reverse proxy server
   Loaded: loaded (/lib/systemd/system/nginx.service; enabled)
   Active: active (running) since Wed 2016-06-08 01:03:24 CST; 12s ago
  Process: 1914 ExecStop=/sbin/start-stop-daemon --quiet --stop --retry QUIT/5 --pidfile /run/nginx.pid (code=exited, status=0/SUCCESS)
  Process: 1918 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
  Process: 1917 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
 Main PID: 1922 (nginx)
   CGroup: /system.slice/nginx.service
           鈹溾攢1922 nginx: master process /usr/sbin/nginx -g daemon on; master_process on;
           鈹斺攢1923 nginx: worker process
root@contoso32:~# 


4、通过 Keepalived+Nginx 组成的高可用负载集群的 VIP(192.168.10.100)来访问 FastDFS 集群中的文件 
 
http://192.168.10.100:88/dfs/group1/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.100:88/dfs/group1/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.100:88/dfs/group1/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.100:88/dfs/group1/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.100:88/dfs/group1/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.100:88/dfs/group1/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.100:88/dfs/group2/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.100:88/dfs/group2/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.100:88/dfs/group2/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.100:88/dfs/group2/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.100:88/dfs/group2/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.100:88/dfs/group2/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg

http://192.168.10.100:88/dfs/group3/M00/00/00/wKgKF1dWMIuACRrOAACUbdn5ZBU223.jpg
http://192.168.10.100:88/dfs/group3/M00/00/00/wKgKGFdWMKCAL0IWAAEI-MQMIa8607.jpg
http://192.168.10.100:88/dfs/group3/M00/00/00/wKgKF1dWMKqAauxIAACWFy2WNSs175.jpg
http://192.168.10.100:88/dfs/group3/M00/00/00/wKgKGFdWMPCAS1n0AABZm0qVaPQ119.jpg
http://192.168.10.100:88/dfs/group3/M00/00/00/wKgKF1dWMPaAJcnBAAJzRAIgGB4713.jpg
http://192.168.10.100:88/dfs/group3/M00/00/00/wKgKGFdWMPqAK4JKAAAvRRpP8l4687.jpg


zhengzizhi
关注
专栏目录
Laravelfastdfs是分布式文件存储系统FastDFS的通用composer组件
08-09
Laravel-fastdfs是分布式文件存储系统FastDFS的通用composer组件，支持常见的php框架，如laravel，yii2，thinkphp5等
FastDFS 分布式架构部署
weixin_46525246的博客
10-10 601
Linux下的FastDFS分布式存储 一、分布式文件系统介绍 分布式文件系统：Distributed file system, DFS，又叫做网络文件系统：Network File System。一种允许文件通过网络在多台主机上分享的文件系统，可让多机器上的多用户分享文件和存储空间。 特点：在一个分享的磁盘文件系统中，所有节点对数据存储区块都有相同的访问权，在这样的系统中，访问权限就必须由客户端程序来控制。分布式文件系统可能包含的功能有：透通的数据复制与容错。 分布式文件系统是被设计用在局域网。
FastDFS分布式存储
最新发布
henanxiaoman的博客
07-22 1236
FastDFS是一个开源的轻量级分布式文件系统，纯C实现，目前提供了C、Java和PHP API。功能包括：文件存储，文件同步，文件访问（文件上传、文件下载）等，解决了大容量存储和负载均衡的问题。特别适合以中小文件（建议范围：4KB < file_size <500MB）为载体的在线服务。Fast DFS系统有三个角色：跟踪服务器(Tracker Server)、存储服务器(Storage Server)和客户端(Client)。
分布式文件系统部署
weixin_33719619的博客
06-03 163
2019独角兽企业重金招聘Python工程师标准>>> ...
TCP Ports list (3498 ports in list)
热门推荐
zyb378747350的专栏
01-11 44万+
参考地址:https://www.gasmi.net/tcp.php TCP Ports list (3498 ports in list) 1 tcpmux TCP Port Service Multiplexer 2 compressnet Management Utility 3 compressnet Compression Process
部署 FastDFS 分布式存储系统
RunzIyy的博客
03-04 498
1. FastDFS ​ fastdfs 是一个由C语言开发的 分布式的存储系统，比较适合存储一些 视频、音频、文档（4kb）、图片。 功能包括： 文件存储、文件同步、文件访问、文件上传、下载， 适合做 以文件为载体的在线功能，例如 图片网站、视频网站等等 2. FastDFS 组成部分 ​ FastDFS 由 客户端（client）、跟踪服务器（Tracker Server）、 存储服务器（...
fastDFS分布式文件系统部署方案
12-16
【FastDFS分布式文件系统部署方案】 FastDFS是一个开源的高性能分布式文件系统，它专注于解决海量数据存储的问题，尤其适用于中小文件（建议大小在4KB到500MB之间）的在线服务。FastDFS提供了文件存储、文件同步和...
FastDFS分布式文件系统环境搭建及安装过程解析
08-24
FastDFS分布式文件系统环境搭建及安装过程解析 FastDFS是一个基于开源的分布式文件系统，主要解决了大容量存储和负载均衡的问题，非常适合以文件为载体的在线服务，如相册网站、视频网站等等。FastDFS环境搭建和...
FastDFS分布式文件系统容器化部署文件.zip
09-04
FastDFS分布式文件系统单机容器化部署，集群容器化部署 使用方法见：https://blog.csdn.net/pcn01/article/details/104464689
go-fastdfs分布式文件系统-其他
06-12
go-fastdfs是一个基于http协议的分布式文件系统，它基于大道至简的设计理念，一切从简设计，使得它的运维及扩展变得更加简单，它具有高...go-fastdfs分布式文件系统 更新日志：v1.4.2修复图片缩放过大服务出现退出问题
双机热备磁盘阵列服务器安装与配置教程
06-08
双机热备磁盘阵列服务器安装与配置教程
Linux下FastDFS分布式存储高可用集群-总结及部署记录（个人珍藏版）
08-29
本篇文章详细记录了Linux下FastDFS分布式存储高可用集群-总结及部署过程，讲解到位，可用作线上实操手册。特在此分享，希望能帮助到有用到的朋友。
FastDFS 分布式集群搭建详解
程序员大佬超的博客
02-06 3322
如题。
FastDFS系列(四)：FastDFS集成FastDHT
Show Me The Code
07-21 984
前言
GFS分布式文件系统简介及部署——让存储变得更高级
想成功，靠自己
05-10 986
GFS分布式文件系统简介及部署一、GFS概述1、文件系统①、文件系统组成②、文件系统的作用③、专业术语二、GFS特点三、GFS工作原理四、GFS卷1、GFS卷类型2、三大基本卷的特点①、分布式卷②、条带卷③、复制卷五、部署GFS集群1、部署节点集群2、部署客户端3、正常测试4、破坏性测试①、分布式卷数据（可查看，但缺少node2的demo5.log）②、条带卷（不可查看，不具备冗余）③、复制卷（可查看 ，有冗余）④、分布式条带卷（不可查看，不具备冗余）⑤、分布式复制卷（可查看 ，有冗余）六、gluster命
第三章、一文告诉你FastDFS分布式如何部署
qq_31821733的博客
09-09 1871
上一章节介绍了FastDFS的单机部署和使用，但是实际上的场景中不可能只用单机来做，更多的时候是采用集群部署，那么本章就带大家进入集群部署的研究。 1、准备环境 我这里采用7台，当然你们按照自己的选择，最外层的Nginx是用来进行统一域名+请求转发，另外我设定了2个tracker分别负载到2个组，如果不清楚这些概念可以看我的第一章节基础部分。15+16作为组1，互为主备；17+23作为组2，互为主备；13+14分别为两个tracker。 group...
分布式文件系统 FastDFS 服务端的部署
彭楷淳在 CSDN
12-23 224
FastDFS 百度百科 FastDFS 是一个开源的轻量级分布式文件系统，它对文件进行管理，功能包括：文件存储、文件同步、文件访问（文件上传、文件下载）等，解决了大容量存储和负载均衡的问题。特别适合以文件为载体的在线服务，如相册网站、视频网站等等。 FastDFS 为互联网量身定制，充分考虑了冗余备份、负载均衡、线性扩容等机制，并注重高可用、高性能等指标，使用 FastDFS 很容易搭建一套高性能的文件服务器集群提供文件上传、下载等服务。 FastDFS 简介 FastDFS 服务端有两个角色：跟踪器
损坏的主文件表_JVM虚拟机Class文件之魔数与Class文件版本
weixin_39974409的博客
12-03 108
Class文件数据类型 Class文件是一组以(8位bit的)byte字节为基础单位的二进制流。 根据Java虚拟机规范的规定，Class文件格式采用一种类似于C语言结构体的伪结构来存储数据，这种伪结构中只有两种数据类型：无符号数和表。无符号数：无符号数属于基本的数据类型，以u1、u2、u4、u8来分别代表1个字节、2个字节、4个字节和8个字节；...
"快速部署FastDFS分布式文件系统，详细步骤简单易懂
FastDFS是一个开源的高性能分布式文件系统（DFS）。它的主要功能包括文件存储、文件同步和文件访问，以及高容量和负载平衡。它主要解决了海量数据存储问题，特别适合以中小文件（建议范围：4KB ）为载体的在线服务。...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值