hpux APA配置

最新推荐文章于 2024-10-15 10:20:47 发布

人生浪子

最新推荐文章于 2024-10-15 10:20:47 发布

阅读量377

点赞数 4

文章标签：网络 unix

本文链接：https://blog.csdn.net/zhiyong1986/article/details/141311437

版权

APA 配置总结
1：APA配置说明和要求：:

2：原来配置APA的情况

下面是4个网卡两两绑定并各配置一个地址，

YY4#[/]netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 32808 127.0.0.0 127.0.0.1 170069 0 170069 0 0
lan0 1500 192.168.48.0 192.168.48.24 33531 0 27413 0 0
lan901 1500 10.208.229.0 10.208.229.17 628617 0 128637 0 0
lan900 1500 10.208.229.0 10.208.229.16 1 0 1 0 0

查看lan900的状态
YY4#[/]nwmgr -A all -c lan900
lan900 current values:
Speed = 2 Gbps Full Duplex
MTU = 1500
Virtual Maximum Transmission Unit = 0
MAC Address = 0x00248177bde3
Network Management ID = 36
Features = Linkagg Interface
IPV4 Recv CKO
IPV4 Send CKO
VLAN Support
VLAN Tag Offload
64Bit MIB Support
Load Distribution Algorithm = LB_MAC
Mode = MANUAL
Parent PPA = -
APA State = Up
Membership = 4,6