uboot移植分析
linux_甦生
arm linux 单片机 c++ c
展开
-
u-boot-2016.01分析s3c2410启动过程
首先从u-boot官网下载u-boot-2016.01.tar.gz的源码。解压然后配置顶层Makefile中的CROSS_COMPILE=”你的交叉编译器路径”后执行如下命令开始编译:make smdk2410_defconfigmake 编译成功后会在你的u-boot-2016.01文件夹下面生成u-boot.bin U-boot.lds等文件。注意在新版u-boot中还有一个文件叫Conf原创 2016-01-26 09:44:01 · 1184 阅读 · 2 评论 -
uboot-2018.05移植GCC报错:gcc is older than 6.0
*** Your GCC is older than 6.0 and is not supported arch/arm/config.mk:66: recipe for target 'checkgcc6' failed make: *** [checkgcc6] Error 1 最新的arm交叉编译器下载地址原创 2018-05-14 16:38:04 · 4577 阅读 · 1 评论