引子：vmware爱好者的《Brocade FOS firmware文件下载 及 博科光纤交换机固件升级》：http://t.csdnimg.cn/MBtiU
！！！警告！！！
！！！更新到7.4.x前要处理mapsConfig --fwconvert！！！
！！！有些License Code会有格式不兼容，导致无法升级到一些版本！！！
！！！7.4.2e版本之后，会提示并禁止超过EOA产品支持周期的设备运行firmwaredownload和supportsave(CLI_root和webtool都禁止运行），千万不要尝试e和f版本！！！
更新目的：Brocade FOS更新的目的就是为了解决webtools的老旧Java各种安全问题报错，导致的无法打开图形界面问题。但是e版本之后就不允许执行firmwaredownload和supportsave命令，这说明brocade很龌龊呀！
我是用迅雷下载的17F8E2FAC8CD08C682B3D2A5CC294B48B1DA2ED6
给的7个BT号，有3个无内容，还有好像重复的，没太看明白。
前期准备：建议现场操作，串口接着进行操作，网口接着进行http/Java和ftp（3CDaemon做ftp-Server)。各版本微码文件备齐，有些版本可能无法使用。webtools全部截屏，CLI_root全部输出型命令运行并保存记录，config配置文件upload保存下来。如果有Brocade原厂U盘插好，识别出来使用，否则就要配好ftp/sftp/scp服务器和网络连接。
webtools升级Brocade300，v7.4.1d->v7.4.2第一次reboot后，会进入故障状态，无法正常启动，绝大多数命令执行时报错，无法运行，网口eth0配置信息也会丢失，但可以用ifconfig进行配置，但router配不上，直能同网段访问。
修复需要手工执行：
1、firmwarecommit
2、firmwarecleaninstall
3、firmwarerestore
恢复回v7.4.1d之后，系统才会恢复正常，配置信息也还在，新版本的webtool和ssh和ftp都可以正常访问，但用CLI_root往上继续更新，每次都会这样，但是能更新上新版本，直到7.2.4d->7.4.2g(自7.4.2e版本开始，禁止超过EOA的设备运行firmwaredownload和supportsave等功能，webtools同样禁止使用这些功能，执行时会报已禁止使用），但是firmwarecheck有的新版本显示正常，有的显示异常，webtools/nameserver/switchAdministration/ZoneAdministration等未见明显异常。
注：7.4.x开始，webtools不支持report了。还有Fabric Watch不可用了，要在更新微码前做mapsConfig --fwconvert。
WARNING: Fabric Watch is discontinued in FOS 7.4 and will not run after firmware upgrade. To continue with monitoring capability, it is recommended to migrate to MAPS prior to firmware upgrade. Users can convert existing Fabric Watch thresholds into MAPS policies by using "mapsConfig --fwconvert" CLI command and continue monitoring with the same settings. Fabric Watch thresholds cannot be converted to MAPS policies after firmware upgrade. Please refer to MAPS Administrator's Guide for further information.
mapsConfig --fwconvert
7.3.1d to 7.4.0b
更新到7.3.2成功，但是发现License:RydcydbdRcSFedzT丢了，继续往上升会提示无效的License Code，并退出升级操作，添加这个License Code时，也报同样问题，更新到原版本7.3.1d后，恢复正常，再往7.3.2b更新时报错无法执行，直接更新到7.4.0a成功，更新到7.4.0b也成功，再高的都报License问题无法继续。直接从7.3.1d更新到7.4.0b也正常。
就是含如下16字符的短的红色许可码的与很多版本微码不兼容，而绿色这种37字符的长代码的却可以直接从7.3.1d升级到7.4.2d。
root> licenseshow
RydcydbdRcSFedzT:
Open Frame Redirection license
Fabric license
Remote Switch license
Remote Fabric license
Extended Fabric license
First Ports on Demand license - additional 8 port upgrade license
XF3MWmPZFmFGSHTPrgCQXXHLJFH39ZYgB7A9F:
8 Gig FC license
root> licenseshow
BWRSgBFWY4BCYf9YDDHQ7MSYG3tCQZAmBJmgN:
8 Gig FC license
HFDYYtrPWBgF77m7Nt4FKa3QYKCSgtt4BSYGG:
First Ports on Demand license - additional 8 port upgrade license
tQHKJCDAT4GYCaCmP3K37WfffrfA3E9PB73MK:
Second Ports on Demand license - additional 8 port upgrade license
root> licenseshow
rPADQTfZABf4ERSRZLr9Mf9Q4AYNCYJ3BAGgK:
Enhanced Group Management license
RK9YaDmHQLNHPKFagLNDLRFTN7ZYEKTWBJQBM:
8 Gig FC license
YKY9S7DtCJPmXZBKLS7CSDTAHXRMmW3DBSYDR:
Full Ports on Demand license - additional 16 port upgrade license
但是7.4x，会提示如下：
root> firmwaredownload -s -b 172.10.14.249,test,v7.4.0a,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
WARNING: Fabric Watch is discontinued in FOS 7.4 and will not run after firmware upgrade. To continue with monitoring capability, it is recommended to migrate to MAPS prior to firmware upgrade. Users can convert existing Fabric Watch thresholds into MAPS policies by using "mapsConfig --fwconvert" CLI command and continue monitoring with the same settings. Fabric Watch thresholds cannot be converted to MAPS policies after firmware upgrade. Please refer to MAPS Administrator's Guide for further information.
System settings check passed.
You are running firmwaredownload with auto-reboot and auto-commit enabled. After the firmware is downloaded the system will reboot and commit firmware automatically.
Do you want to continue (Y/N) [Y]:
root> version
Kernel: 2.6.14.2
Fabric OS: v7.3.1d
Made on: Wed Nov 11 21:19:48 2015
Flash: Sat Mar 18 02:12:32 2017
BootProm: 1.0.11
root> firmwarecheck
Validating integrity of firmware on root filesystem
Please wait...
Firmware integrity test passed.
root> firmwareshow
Appl Primary/Secondary Versions
------------------------------------------
FOS v7.3.1d
v7.3.1d
root> firmwaredownloadstatus
root>
root>
root> firmwarekeyshow
Keysize : 1024
-----BEGIN PUBLIC KEY-----
MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDjuQpMk4FrceFvVZ12iAakFNv9
k4ZGhFDMPGIHIems1Ywqdl55U7LTDIVwoViTLevtIDn012r1XlNQ+DORAzvJfkwD
XegkeTn/8wDgHBwotPz4WTd9UGJ9M0Vs52ro1TiukIpsh084LXKgxt+IgdseRCzY
8p8rQZWLpyputx6rgwIDAQAB
-----END PUBLIC KEY-----
Keysize : 2048
-----BEGIN PUBLIC KEY-----
MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAxAPVJ2UtonmCYrCejwm/
tqAi3rIBf5+dba6p7w8wIH9af7KaTPj049xXwdzsUabwUUiifqFWBP/E9pBOITI8
kYm7dijk1bszNLYKpeGQx6vsOLAOe18uRtIBZPi+3dl9lSTTwNxJ3mAnwtsVT7RQ
PHE/twCLTePg3AObHJZ7hmDkf3cl3qRjo6yV1QlNgU1GbtGQyIMSGFKUSBh47V5n
wJxYFZPSJ0GyZTmjfL0IDWPF+wzcaZ7bv4KqdjK05Djlsy8Tg1xx4O/1A7jwR3Ie
5J6zEleBH10q/YoH2JbVE0M8BK6Mz7jTfuhFWfyg9I3scQWL0cSGxTYjhKJSsK6/
qQIDAQAB
-----END PUBLIC KEY-----
root>
root> firmwarekeyshow -h
Keysize : 1024
-----BEGIN PUBLIC KEY-----
MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDjuQpMk4FrceFvVZ12iAakFNv9
k4ZGhFDMPGIHIems1Ywqdl55U7LTDIVwoViTLevtIDn012r1XlNQ+DORAzvJfkwD
XegkeTn/8wDgHBwotPz4WTd9UGJ9M0Vs52ro1TiukIpsh084LXKgxt+IgdseRCzY
8p8rQZWLpyputx6rgwIDAQAB
-----END PUBLIC KEY-----
Keysize : 2048
-----BEGIN PUBLIC KEY-----
MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAxAPVJ2UtonmCYrCejwm/
tqAi3rIBf5+dba6p7w8wIH9af7KaTPj049xXwdzsUabwUUiifqFWBP/E9pBOITI8
kYm7dijk1bszNLYKpeGQx6vsOLAOe18uRtIBZPi+3dl9lSTTwNxJ3mAnwtsVT7RQ
PHE/twCLTePg3AObHJZ7hmDkf3cl3qRjo6yV1QlNgU1GbtGQyIMSGFKUSBh47V5n
wJxYFZPSJ0GyZTmjfL0IDWPF+wzcaZ7bv4KqdjK05Djlsy8Tg1xx4O/1A7jwR3Ie
5J6zEleBH10q/YoH2JbVE0M8BK6Mz7jTfuhFWfyg9I3scQWL0cSGxTYjhKJSsK6/
qQIDAQAB
-----END PUBLIC KEY-----
root>
root> firmwaredownload
Server Name or IP Address: 172.10.14.249
User Name: test
File Name: \v7.3.2
Network Protocol(1-auto-select, 2-FTP, 3-SCP, 4-SFTP) [1]:
Password:
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
System settings check passed.
You can run firmwaredownloadstatus to get the status
of this command.
This command will cause a warm/non-disruptive boot but will
require that existing telnet, secure telnet or SSH sessions
be restarted.
Do you want to continue (Y/N) [Y]: y
Firmware is being downloaded to the switch. This step may take up to 30 minutes.
Preparing for firmwaredownload...
Start to install packages...
dir-1.0.5-5
############################### [ 100% ]
ldconfig-2.16.2-4
############################### [ 100% ]
glibc-2.3.7-8
############################### [ 100% ]
glibc-linuxthreads-2.3.7-3
############################### [ 100% ]
bash-2.05-8
############################### [ 100% ]
readline-4.2-4
############################### [ 100% ]
terminfo-11.2.1-6
############################### [ 100% ]
termcap-1.4-5
############################### [ 100% ]
vixie-cron-3.0.2-62_4
############################### [ 100% ]
fileutils-4.1-4
############################### [ 100% ]
textutils-1.23-4
############################### [ 100% ]
setup-7.3.2-28
############################### [ 100% ]
swbd12-setup-1.3.5-4
############################### [ 100% ]
which-2.13-4
############################### [ 100% ]
findutils-4.2-4
############################### [ 100% ]
bzip-1.0.2-4
############################### [ 100% ]
zlib-1.1.5-5
############################### [ 100% ]
chkconfig-1.0.1-7
############################### [ 100% ]
sed-3.03-6
############################### [ 100% ]
procps-3.3.1-3
############################### [ 100% ]
psmisc-19.0.1-5
############################### [ 100% ]
modutils-3.2-9
############################### [ 100% ]
sin-1.1.1-6
############################### [ 100% ]
rcinit-1.1.5-9
############################### [ 100% ]
misc-1.0.1-6
############################### [ 100% ]
pam-0.77-29
############################### [ 100% ]
util-linux-2.13o-18
############################### [ 100% ]
sh-utils-3.0-10
############################### [ 100% ]
popt-1.4-4
############################### [ 100% ]
grep-2.4.3-4
############################### [ 100% ]
rpm-4.3-5
############################### [ 100% ]
sysvinit-2.79-10
############################### [ 100% ]
man-1.6g-7
############################### [ 100% ]
less-3.4.1-5
############################### [ 100% ]
gzip-1.2.5a-4
############################### [ 100% ]
tar-1.13.20-4
############################### [ 100% ]
rsync-2.6.10-2
############################### [ 100% ]
uuid-libs-1.23-4
############################### [ 100% ]
e2fsprogs-1.39-5
############################### [ 100% ]
cpio-2.4.3-4
############################### [ 100% ]
dev-1.4.0-2
############################### [ 100% ]
bootenv-1.0.3-7
############################### [ 100% ]
wdtd-1.0.1-5
############################### [ 100% ]
fwdl-7.3.2-47
############################### [ 100% ]
telnet-server-0.18-7
############################### [ 100% ]
kernel-2.6.14.2-2223272156
############################### [ 100% ]
kernel-module-usb-2.6.14.2-2223272156
############################### [ 100% ]
swbd21-drivers-2.4.20-4
############################### [ 100% ]
sysklogd-1.5-9
############################### [ 100% ]
getty-2.0.8j-8
############################### [ 100% ]
net-tools-1.58-6
############################### [ 100% ]
uucp-1.07-6
############################### [ 100% ]
portmap-5.0-4
############################### [ 100% ]
inetd-0.18-8
############################### [ 100% ]
iptables-1.4-1
############################### [ 100% ]
tcpd-7.7-4
############################### [ 100% ]
rsh-server-0.18-4
############################### [ 100% ]
rsh-0.18-4
############################### [ 100% ]
openssl-libs-1.0.1e-1
############################### [ 100% ]
openssh-6.2p1-1
############################### [ 100% ]
openssh-server-6.2p1-1
############################### [ 100% ]
rusers-server-0.18-4
############################### [ 100% ]
rdate-990821.0.1-5
############################### [ 100% ]
logrotate-3.5.5-6
############################### [ 100% ]
ntp-5.94e-4
############################### [ 100% ]
pciutils-2.1.9-4
############################### [ 100% ]
strace-4.3-4
############################### [ 100% ]
sendmail-8.10-11
############################### [ 100% ]
iproute2-2.5-10
############################### [ 100% ]
libxml2-2.6.31-1
############################### [ 100% ]
fss-7.3.2-11
############################### [ 100% ]
fabos-setup-7.3.2-15
############################### [ 100% ]
fabos-drivers-7.3.2-11
############################### [ 100% ]
fabos-libs-7.3.2-11
############################### [ 100% ]
fabos-diag-7.3.2-14
############################### [ 100% ]
fabos-7.3.2-15
############################### [ 100% ]
fabos-daemons-7.3.2-4
############################### [ 100% ]
fabos-zoning-7.3.2-10
############################### [ 100% ]
sqlite-3.2.2-4
############################### [ 100% ]
dhcpcd-1.4-4
############################### [ 100% ]
dhclient-1.1-1
############################### [ 100% ]
fabos-vf-7.3.2-10
############################### [ 100% ]
fabos-hmon-7.3.2-10
############################### [ 100% ]
fabos-wwnhs-7.3.2-10
############################### [ 100% ]
fabos-man-7.3.2-13
############################### [ 100% ]
fabos-swbd71-7.3.2-3
############################### [ 100% ]
apache-2.4.6-10
############################### [ 100% ]
fastcgi-2.3-4
############################### [ 100% ]
fabos-webtools-7.3.2-11
############################### [ 100% ]
fabos-webtoolsez-7.3.2-3
############################### [ 100% ]
tz-7.12-6
############################### [ 100% ]
mtracer-tool-2.4.20-13
############################### [ 100% ]
sysstat-5.0.5-8
############################### [ 100% ]
prom-440epx-1.0.11-1
Please avoid powering off the system during prom update.
############################### [ 100% ]
ipv6-1.3-8
############################### [ 100% ]
awk-3.1.1-6
############################### [ 100% ]
ipsec-1.1-1
############################### [ 100% ]
hss-diag-7.3.2-10
############################### [ 100% ]
Removing unneeded files, please wait ...
Finished removing unneeded files.
All packages have been downloaded successfully.
Firmware has been downloaded to the secondary partition of the switch.
HA Rebooting ...
Connection was reset.
Please enter login information for 172.122.100.205.
Username: root
The private key file could not be found:
::rawkey
Note that the public key file and private key file must have the same name (e.g., "Identity.pub" and "Identity") and must be located in the same folder.
The system cannot find the path specified.
Password:
172.122.0.205,
-----------------------------------------------------------------
Disclaimer for Root and Factory Accounts Usage!
This Fibre Channel switch is equipped with Root and Factory accounts
that are intended for diagnostics and debugging purposes solely by
the Equipment vendor's trained engineers. Improper use of the
functionality made available through the Root or Factory account could
cause significant harm and disruption to the operation of the SAN fabric.
Your use of the functionality made available through the Root or Factory
account is at your sole risk and you assume all liability resulting from
such use. The Equipment vendor shall have no liability for any losses
or damages arising from or relating to the use of the Root or Factory
account (and the functionality enabled thereby) by anyone other than
the Equipment vendor's authorized engineers.
Proceeding with the usage of this switch as the Root or Factory user
explicitly indicates your agreement to the terms of this disclaimer.
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.
Password was not changed. Will prompt again at next login
until password is changed.
root>
root>
root>
root> version
Kernel: 2.6.14.2
Fabric OS: v7.3.2
Made on: Wed Feb 17 07:11:16 2016
Flash: Wed Jul 10 11:38:03 2024
BootProm: 1.0.11
root>
root>
root> firmwarecheck
Validating integrity of firmware on root filesystem
Please wait...
Firmware integrity test passed.
root>
root>
root> firmwaredownloadstatus
[1]: Wed Jul 10 11:35:48 2024
Firmware is being downloaded to the switch. This step may take up to 30 minutes.
[2]: Wed Jul 10 11:41:10 2024
Firmware has been downloaded to the secondary partition of the switch.
[3]: Wed Jul 10 11:43:02 2024
The firmware commit operation has started. This may take up to 10 minutes.
[4]: Wed Jul 10 11:46:21 2024
The commit operation has completed successfully.
[5]: Wed Jul 10 11:46:21 2024
Firmwaredownload command has completed successfully. Use firmwareshow to verify the firmware versions.
root>
root>
root> firmwareshow
Appl Primary/Secondary Versions
------------------------------------------
FOS v7.3.2
v7.3.2
root>
root> firmwarecheck
Validating integrity of firmware on root filesystem
Please wait...
Firmware integrity test passed.
root>
root>
L2-TR-B300-ALJ4011N0GN-JG3614U:root> firmwareshow
Appl Primary/Secondary Versions
------------------------------------------
FOS v7.3.2
v7.3.2
root>
root>
root> firmwareshow --history
Firmware version history
Sno Date & Time Switch Name Slot PID FOS Version
1 Fri Mar 17 18:12:32 2017 unknown(0) 0 935 Fabos Version 7.3.1d
2 Wed Jul 10 03:38:03 2024 L2-TR-B300 0 954 Fabos Version 7.3.2
root> licenseshow
XF3MWmPZFmFGSHTPrgCQXXHLJFH39ZYgB7A9F:
8 Gig FC license
root> licenseport
licenseport failed : this command is not supported on this product.
root> licenseadd
Usage: licenseadd "license-key"
root> licenseadd "RydcydbdRcSFedzT"
invalid license-key "RydcydbdRcSFedzT"
root>
root>
root>
root> firmwarerestore
The following items need to be addressed before restoring the specified firmware:
No need to run firmwarerestore because firmware has already been committed, or there is no firmwaredownload performed.
root> firmwaredownload 172.10.14.249,test,\v7.3.2b,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
The following item(s) need to be addressed before downloading the specified firmware:
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Firmwaredownload failed.
root>
root>
root> firmwaredownload
Server Name or IP Address: 172.10.14.249
User Name: test
File Name: v7.3.2b
Network Protocol(1-auto-select, 2-FTP, 3-SCP, 4-SFTP) [1]:
Password:
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
The following item(s) need to be addressed before downloading the specified firmware:
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Firmwaredownload failed.
root>
root> firmwaredownload 172.10.14.249,test,\v7.3.1d,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
System settings check passed.
You can run firmwaredownloadstatus to get the status
of this command.
This command will cause a warm/non-disruptive boot but will
require that existing telnet, secure telnet or SSH sessions
be restarted.
Do you want to continue (Y/N) [Y]:
Firmware is being downloaded to the switch. This step may take up to 30 minutes.
Preparing for firmwaredownload...
Start to install packages...
dir-1.0.5-5
############################### [ 100% ]
ldconfig-2.16.2-4
############################### [ 100% ]
glibc-2.3.7-8
############################### [ 100% ]
glibc-linuxthreads-2.3.7-3
############################### [ 100% ]
bash-2.05-8
############################### [ 100% ]
readline-4.2-4
############################### [ 100% ]
terminfo-11.2.1-6
############################### [ 100% ]
termcap-1.4-5
############################### [ 100% ]
vixie-cron-3.0.2-62_4
############################### [ 100% ]
fileutils-4.1-4
############################### [ 100% ]
textutils-1.23-4
############################### [ 100% ]
setup-7.3.1d-28
############################### [ 100% ]
swbd12-setup-1.3.5-4
############################### [ 100% ]
which-2.13-4
############################### [ 100% ]
findutils-4.2-4
############################### [ 100% ]
bzip-1.0.2-4
############################### [ 100% ]
zlib-1.1.5-5
############################### [ 100% ]
chkconfig-1.0.1-7
############################### [ 100% ]
sed-3.03-6
############################### [ 100% ]
procps-3.3.1-3
############################### [ 100% ]
psmisc-19.0.1-5
############################### [ 100% ]
modutils-3.2-9
############################### [ 100% ]
sin-1.1.1-6
############################### [ 100% ]
rcinit-1.1.5-9
############################### [ 100% ]
misc-1.0.1-6
############################### [ 100% ]
pam-0.77-29
############################### [ 100% ]
util-linux-2.13o-18
############################### [ 100% ]
sh-utils-3.0-10
############################### [ 100% ]
popt-1.4-4
############################### [ 100% ]
grep-2.4.3-4
############################### [ 100% ]
rpm-4.3-5
############################### [ 100% ]
sysvinit-2.79-10
############################### [ 100% ]
man-1.6g-7
############################### [ 100% ]
less-3.4.1-5
############################### [ 100% ]
gzip-1.2.5a-4
############################### [ 100% ]
tar-1.13.20-4
############################### [ 100% ]
rsync-2.6.10-2
############################### [ 100% ]
uuid-libs-1.23-4
############################### [ 100% ]
e2fsprogs-1.39-5
############################### [ 100% ]
cpio-2.4.3-4
############################### [ 100% ]
dev-1.4.0-2
############################### [ 100% ]
bootenv-1.0.3-7
############################### [ 100% ]
wdtd-1.0.1-5
############################### [ 100% ]
fwdl-7.3.1d-47
############################### [ 100% ]
telnet-server-0.18-7
############################### [ 100% ]
kernel-2.6.14.2-991871115
############################### [ 100% ]
kernel-module-usb-2.6.14.2-991871115
############################### [ 100% ]
swbd21-drivers-2.4.20-4
############################### [ 100% ]
sysklogd-1.5-9
############################### [ 100% ]
getty-2.0.8j-8
############################### [ 100% ]
net-tools-1.58-6
############################### [ 100% ]
uucp-1.07-6
############################### [ 100% ]
portmap-5.0-4
############################### [ 100% ]
inetd-0.18-8
############################### [ 100% ]
iptables-1.4-1
############################### [ 100% ]
tcpd-7.7-4
############################### [ 100% ]
rsh-server-0.18-4
############################### [ 100% ]
rsh-0.18-4
############################### [ 100% ]
openssl-libs-1.0.1e-1
############################### [ 100% ]
openssh-6.2p1-1
############################### [ 100% ]
openssh-server-6.2p1-1
############################### [ 100% ]
rusers-server-0.18-4
############################### [ 100% ]
rdate-990821.0.1-5
############################### [ 100% ]
logrotate-3.5.5-6
############################### [ 100% ]
ntp-5.94e-4
############################### [ 100% ]
pciutils-2.1.9-4
############################### [ 100% ]
strace-4.3-4
############################### [ 100% ]
sendmail-8.10-11
############################### [ 100% ]
iproute2-2.5-10
############################### [ 100% ]
libxml2-2.6.31-1
############################### [ 100% ]
fss-7.3.1d-11
############################### [ 100% ]
fabos-setup-7.3.1d-15
############################### [ 100% ]
fabos-drivers-7.3.1d-11
############################### [ 100% ]
fabos-libs-7.3.1d-11
############################### [ 100% ]
fabos-diag-7.3.1d-14
############################### [ 100% ]
fabos-7.3.1d-15
############################### [ 100% ]
fabos-daemons-7.3.1d-4
############################### [ 100% ]
fabos-zoning-7.3.1d-10
############################### [ 100% ]
sqlite-3.2.2-4
############################### [ 100% ]
dhcpcd-1.4-4
############################### [ 100% ]
dhclient-1.1-1
############################### [ 100% ]
fabos-vf-7.3.1d-10
############################### [ 100% ]
fabos-hmon-7.3.1d-10
############################### [ 100% ]
fabos-wwnhs-7.3.1d-10
############################### [ 100% ]
fabos-man-7.3.1d-13
############################### [ 100% ]
fabos-swbd71-7.3.1d-3
############################### [ 100% ]
apache-2.4.6-10
############################### [ 100% ]
fastcgi-2.3-4
############################### [ 100% ]
fabos-webtools-7.3.1d-11
############################### [ 100% ]
fabos-webtoolsez-7.3.1d-3
############################### [ 100% ]
tz-7.12-6
############################### [ 100% ]
mtracer-tool-2.4.20-13
############################### [ 100% ]
sysstat-5.0.5-8
############################### [ 100% ]
prom-440epx-1.0.11-1
Please avoid powering off the system during prom update.
############################### [ 100% ]
ipv6-1.3-8
############################### [ 100% ]
awk-3.1.1-6
############################### [ 100% ]
ipsec-1.1-1
############################### [ 100% ]
hss-diag-7.3.1d-10
############################### [ 100% ]
Removing unneeded files, please wait ...
Finished removing unneeded files.
All packages have been downloaded successfully.
Firmware has been downloaded to the secondary partition of the switch.
HA Rebooting ...
Connection was reset.
Please enter login information for 172.122.100.205.
Username: root
The private key file could not be found:
::rawkey
Note that the public key file and private key file must have the same name (e.g., "Identity.pub" and "Identity") and must be located in the same folder.
The system cannot find the path specified.
Password:
ChangChunCity Railway Traffic Group Ltd,.Co
Line2-Test-Brocade300-172.122.0.205,
-----------------------------------------------------------------
Disclaimer for Root and Factory Accounts Usage!
This Fibre Channel switch is equipped with Root and Factory accounts
that are intended for diagnostics and debugging purposes solely by
the Equipment vendor's trained engineers. Improper use of the
functionality made available through the Root or Factory account could
cause significant harm and disruption to the operation of the SAN fabric.
Your use of the functionality made available through the Root or Factory
account is at your sole risk and you assume all liability resulting from
such use. The Equipment vendor shall have no liability for any losses
or damages arising from or relating to the use of the Root or Factory
account (and the functionality enabled thereby) by anyone other than
the Equipment vendor's authorized engineers.
Proceeding with the usage of this switch as the Root or Factory user
explicitly indicates your agreement to the terms of this disclaimer.
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.
Password was not changed. Will prompt again at next login
until password is changed.
L2-TR-B300-ALJ4011N0GN-JG3614U:root>
L2-TR-B300-ALJ4011N0GN-JG3614U:root>
L2-TR-B300-ALJ4011N0GN-JG3614U:root> licenseshow
RydcydbdRcSFedzT:
Open Frame Redirection license
Fabric license
Remote Switch license
Remote Fabric license
Extended Fabric license
First Ports on Demand license - additional 8 port upgrade license
XF3MWmPZFmFGSHTPrgCQXXHLJFH39ZYgB7A9F:
8 Gig FC license
L2-TR-B300-ALJ4011N0GN-JG3614U:root>
L2-TR-B300-ALJ4011N0GN-JG3614U:root>
L2-TR-B300-ALJ4011N0GN-JG3614U:root> firmwarecheck
Validating integrity of firmware on root filesystem
Please wait...
Firmware integrity test passed.
L2-TR-B300-ALJ4011N0GN-JG3614U:root>
L2-TR-B300-ALJ4011N0GN-JG3614U:root>
L2-TR-B300-ALJ4011N0GN-JG3614U:root>
L2-TR-B300-ALJ4011N0GN-JG3614U:root> firmwareshow
Appl Primary/Secondary Versions
------------------------------------------
FOS v7.3.1d
v7.3.1d
root>
root>
root> firmwareshow --history
Firmware version history
Sno Date & Time Switch Name Slot PID FOS Version
1 Fri Mar 17 18:12:32 2017 unknown(0) 0 935 Fabos Version 7.3.1d
2 Wed Jul 10 03:38:03 2024 L2-TR-B300-ALJ4011N0GN-JG3614U 0 954 Fabos Version 7.3.2
3 Wed Jul 10 12:19:56 2024 L2-TR-B300-ALJ4011N0GN-JG3614U 0 1167 Fabos Version 7.3.1d
root>
root>
root>
root> firmwaredownloadstatus
[1]: Wed Jul 10 12:17:11 2024
Firmware is being downloaded to the switch. This step may take up to 30 minutes.
[2]: Wed Jul 10 12:23:14 2024
Firmware has been downloaded to the secondary partition of the switch.
[3]: Wed Jul 10 12:24:56 2024
The firmware commit operation has started. This may take up to 10 minutes.
[4]: Wed Jul 10 12:29:16 2024
The commit operation has completed successfully.
[5]: Wed Jul 10 12:29:16 2024
Firmwaredownload command has completed successfully. Use firmwareshow to verify the firmware versions.
root>
root> licenseshow
RydcydbdRcSFedzT:
Enhanced Frame Redirection license
Fabric license
Remote Switch license
Remote Fabric license
First Ports on Demand license - additional 8 port upgrade license
QKfBBBTGmPZHS7FSCSCamQDHKMQ7FmTEBJBPP:
8 Gig FC license
root> firmwareshow --history
Firmware version history
Sno Date & Time Switch Name Slot PID FOS Version
1 Fri Mar 17 18:08:17 2017 unknown(0) 0 935 Fabos Version 7.3.1d
root> firmwaredownload 172.10.14.249,test,v7.4.2d,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
WARNING: Fabric Watch is discontinued in FOS 7.4 and will not run after firmware upgrade. To continue with monitoring capability, it is recommended to migrate to MAPS prior to firmware upgrade. Users can convert existing Fabric Watch thresholds into MAPS policies by using "mapsConfig --fwconvert" CLI command and continue monitoring with the same settings. Fabric Watch thresholds cannot be converted to MAPS policies after firmware upgrade. Please refer to MAPS Administrator's Guide for further information.
The following item(s) need to be addressed before downloading the specified firmware:
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Firmwaredownload failed.
root> firmwaredownload 172.10.14.249,test,v7.4.2,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
WARNING: Fabric Watch is discontinued in FOS 7.4 and will not run after firmware upgrade. To continue with monitoring capability, it is recommended to migrate to MAPS prior to firmware upgrade. Users can convert existing Fabric Watch thresholds into MAPS policies by using "mapsConfig --fwconvert" CLI command and continue monitoring with the same settings. Fabric Watch thresholds cannot be converted to MAPS policies after firmware upgrade. Please refer to MAPS Administrator's Guide for further information.
The following item(s) need to be addressed before downloading the specified firmware:
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Firmwaredownload failed.
root> mapsconfig --fwconvert
Fabric vision license not present. Please install the license and retry the operation.
root> firmwaredownload 172.10.14.249,test,v7.4.0b,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
WARNING: Fabric Watch is discontinued in FOS 7.4 and will not run after firmware upgrade. To continue with monitoring capability, it is recommended to migrate to MAPS prior to firmware upgrade. Users can convert existing Fabric Watch thresholds into MAPS policies by using "mapsConfig --fwconvert" CLI command and continue monitoring with the same settings. Fabric Watch thresholds cannot be converted to MAPS policies after firmware upgrade. Please refer to MAPS Administrator's Guide for further information.
System settings check passed.
You can run firmwaredownloadstatus to get the status
of this command.
This command will cause a warm/non-disruptive boot but will
require that existing telnet, secure telnet or SSH sessions
be restarted.
Do you want to continue (Y/N) [Y]:
Firmware is being downloaded to the switch. This step may take up to 30 minutes.
Preparing for firmwaredownload...
Start to install packages...
dir-1.0.5-5
############################### [ 100% ]
ldconfig-2.16.2-4
############################### [ 100% ]
glibc-2.3.7-8
############################### [ 100% ]
glibc-linuxthreads-2.3.7-3
############################### [ 100% ]
bash-2.05-8
############################### [ 100% ]
readline-4.2-4
############################### [ 100% ]
terminfo-11.2.1-6
############################### [ 100% ]
termcap-1.4-5
############################### [ 100% ]
vixie-cron-3.0.2-62_4
############################### [ 100% ]
fileutils-4.1-4
############################### [ 100% ]
textutils-1.23-4
############################### [ 100% ]
setup-7.4.0b-28
############################### [ 100% ]
swbd12-setup-1.3.5-4
############################### [ 100% ]
which-2.13-4
############################### [ 100% ]
findutils-4.2-4
############################### [ 100% ]
bzip-1.0.2-4
############################### [ 100% ]
zlib-1.1.5-5
############################### [ 100% ]
chkconfig-1.0.1-7
############################### [ 100% ]
sed-3.03-6
############################### [ 100% ]
procps-3.3.1-3
############################### [ 100% ]
psmisc-19.0.1-5
############################### [ 100% ]
modutils-3.2-9
############################### [ 100% ]
sin-1.1.1-6
############################### [ 100% ]
rcinit-1.1.5-9
############################### [ 100% ]
misc-1.0.1-6
############################### [ 100% ]
pam-0.77-29
############################### [ 100% ]
util-linux-2.13o-18
############################### [ 100% ]
sh-utils-3.0-10
############################### [ 100% ]
popt-1.4-4
############################### [ 100% ]
grep-2.4.3-4
############################### [ 100% ]
rpm-4.3-5
############################### [ 100% ]
sysvinit-2.79-10
############################### [ 100% ]
man-1.6g-7
############################### [ 100% ]
less-3.4.1-5
############################### [ 100% ]
gzip-1.2.5a-4
############################### [ 100% ]
tar-1.13.20-4
############################### [ 100% ]
rsync-2.6.10-2
############################### [ 100% ]
uuid-libs-1.23-4
############################### [ 100% ]
e2fsprogs-1.39-5
############################### [ 100% ]
cpio-2.4.3-4
############################### [ 100% ]
dev-1.4.0-2
############################### [ 100% ]
bootenv-1.0.3-7
############################### [ 100% ]
wdtd-1.0.1-5
############################### [ 100% ]
fwdl-7.4.0b-47
############################### [ 100% ]
telnet-server-0.18-7
############################### [ 100% ]
kernel-2.6.14.2-2431841777
############################### [ 100% ]
kernel-module-usb-2.6.14.2-2431841777
############################### [ 100% ]
swbd21-drivers-2.4.20-4
############################### [ 100% ]
sysklogd-1.5-10
############################### [ 100% ]
syslog-ng-3.1.0-3
############################### [ 100% ]
getty-2.0.8j-8
############################### [ 100% ]
net-tools-1.58-6
############################### [ 100% ]
uucp-1.07-6
############################### [ 100% ]
portmap-5.0-4
############################### [ 100% ]
inetd-0.18-8
############################### [ 100% ]
iptables-1.4-1
############################### [ 100% ]
tcpd-7.7-4
############################### [ 100% ]
rsh-server-0.18-4
############################### [ 100% ]
rsh-0.18-4
############################### [ 100% ]
openssl-libs-1.0.1e-1
############################### [ 100% ]
openssh-6.2p1-1
############################### [ 100% ]
openssh-server-6.2p1-1
############################### [ 100% ]
rusers-server-0.18-4
############################### [ 100% ]
rdate-990821.0.1-5
############################### [ 100% ]
logrotate-3.5.5-6
############################### [ 100% ]
ntp-5.94e-4
############################### [ 100% ]
pciutils-2.1.9-4
############################### [ 100% ]
strace-4.3-4
############################### [ 100% ]
sendmail-8.10-11
############################### [ 100% ]
iproute2-2.5-10
############################### [ 100% ]
libxml2-2.6.31-1
############################### [ 100% ]
fss-7.4.0b-11
############################### [ 100% ]
fabos-setup-7.4.0b-15
############################### [ 100% ]
fabos-drivers-7.4.0b-11
############################### [ 100% ]
fabos-libs-7.4.0b-11
############################### [ 100% ]
fabos-diag-7.4.0b-14
############################### [ 100% ]
fabos-7.4.0b-16
############################### [ 100% ]
fabos-daemons-7.4.0b-4
############################### [ 100% ]
fabos-zoning-7.4.0b-10
############################### [ 100% ]
sqlite-3.2.2-4
############################### [ 100% ]
dhcpcd-1.4-4
############################### [ 100% ]
dhclient-1.1-1
############################### [ 100% ]
fabos-vf-7.4.0b-10
############################### [ 100% ]
fabos-hmon-7.4.0b-10
############################### [ 100% ]
fabos-wwnhs-7.4.0b-10
############################### [ 100% ]
fabos-man-7.4.0b-13
############################### [ 100% ]
fabos-swbd71-7.4.0b-3
############################### [ 100% ]
apache-2.4.6-10
############################### [ 100% ]
fastcgi-2.3-4
############################### [ 100% ]
fabos-webtools-7.4.0b-11
############################### [ 100% ]
fabos-webtoolsez-7.4.0b-3
############################### [ 100% ]
tz-7.12-6
############################### [ 100% ]
mtracer-tool-2.4.20-13
############################### [ 100% ]
sysstat-5.0.5-8
############################### [ 100% ]
prom-440epx-1.0.11-1
Please avoid powering off the system during prom update.
############################### [ 100% ]
ipv6-1.3-8
############################### [ 100% ]
awk-3.1.1-6
############################### [ 100% ]
ipsec-1.1-1
############################### [ 100% ]
hss-diag-7.4.0b-10
############################### [ 100% ]
Removing unneeded files, please wait ...
Finished removing unneeded files.
creating the old storage file
All packages have been downloaded successfully.
Firmware has been downloaded to the secondary partition of the switch.
HA Rebooting ...
Please enter login information for 172.22.100.57.
Username: root
The private key file could not be found:
::rawkey
Note that the public key file and private key file must have the same name (e.g., "Identity.pub" and "Identity") and must be located in the same folder.
The system cannot find the path specified.
Password:
Disclaimer for Root and Factory Accounts Usage!
This Fibre Channel switch is equipped with Root and Factory accounts
that are intended for diagnostics and debugging purposes solely by
the Equipment vendor's trained engineers. Improper use of the
functionality made available through the Root or Factory account could
cause significant harm and disruption to the operation of the SAN fabric.
Your use of the functionality made available through the Root or Factory
account is at your sole risk and you assume all liability resulting from
such use. The Equipment vendor shall have no liability for any losses
or damages arising from or relating to the use of the Root or Factory
account (and the functionality enabled thereby) by anyone other than
the Equipment vendor's authorized engineers.
Proceeding with the usage of this switch as the Root or Factory user
explicitly indicates your agreement to the terms of this disclaimer.
Please change passwords for switch default accounts now.
Use Control-C to exit or press 'Enter' key to proceed.
Password was not changed. Will prompt again at next login
until password is changed.
root> version
Kernel: 2.6.14.2
Fabric OS: v7.4.0b
Made on: Tue Jul 28 02:43:00 2015
Flash: Wed Jul 10 21:52:11 2024
BootProm: 1.0.11
root>
root> firmwaredownloadstatus
[1]: Wed Jul 10 21:47:47 2024
Firmware is being downloaded to the switch. This step may take up to 30 minutes.
[2]: Wed Jul 10 21:56:28 2024
Firmware has been downloaded to the secondary partition of the switch.
[3]: Wed Jul 10 21:58:31 2024
The firmware commit operation has started. This may take up to 10 minutes.
[4]: Wed Jul 10 22:01:42 2024
The commit operation has completed successfully.
[5]: Wed Jul 10 22:01:42 2024
Firmwaredownload command has completed successfully. Use firmwareshow to verify the firmware versions.
root>
root>
root> firmwareshow --history
Firmware version history
Sno Date & Time Switch Name Slot PID FOS Version
1 Fri Mar 17 18:08:17 2017 unknown(0) 0 935 Fabos Version 7.3.1d
2 Wed Jul 10 13:52:11 2024 L2-OP-B300-S 0 955 Fabos Version 7.4.0b
root>
root>
root>
root> firmwareshow
Appl Primary/Secondary Versions
------------------------------------------
FOS v7.4.0b
v7.4.0b
root>
root> firmwaredownload 172.10.14.249,test,v7.4.2d,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
The following item(s) need to be addressed before downloading the specified firmware:
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Firmwaredownload failed.
root>
root> firmwaredownload 172.10.14.249,test,v7.4.2g,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
The following item(s) need to be addressed before downloading the specified firmware:
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Firmwaredownload failed.
root>
root> firmwaredownload 172.10.14.249,test,v7.4.2j_ENTRY,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
The following item(s) need to be addressed before downloading the specified firmware:
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Firmwaredownload failed.
root> firmwaredownload 172.10.14.249,test,v7.4.2h,abc123
Server IP: 172.10.14.249, Protocol IPv4
Checking system settings for firmwaredownload...
The following item(s) need to be addressed before downloading the specified firmware:
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Upgrade of FOS is not possible due to an invalid license key. Please contact your reseller.
Firmwaredownload failed.
确实是7.4.2e之后会提示并禁止超过EOA的设备运行firmwaredownload和supportsave(CLI_root和webtool都禁止运行）。
我是更新到7.4.2d后，选择了7.4.2g（同期的jre-8u261-b34_20200823可以用该版webtool)，因为h和j实在是太小了，j就只有SWBD71一个目录，h只有SWBD71、SWBD72、SWBD75、SWBD83、SWBD85、SWBD125、SWBD134目录，不像之前版本好像是完整版，没敢用。7.4.2j提示可以执行升级，但怕禁用功能，未实际执行。
7.3.1d也可以直接成功升级到7.4.2d。
不知能否将j集成到完整版，j的webtool可能版本更高吧。
fabos-webtools-7.4.2g-11.ppc.rpm 4,537KB
fabos-webtools-7.4.2h-11.ppc.rpm 4,537KB
fabos-webtools-7.4.2j-11.ppc.rpm 4,536KB
v7.3.1d.7z 1.03GB (1,108,260,191字节)
v7.4.1d.7z 1.12GB (1,205,972,415字节)
v7.4.1e.7z 1.12GB (1,206,341,683字节)
v7.4.2.7z 1.10GB (1,187,684,027字节)
v7.4.2d.7z 1.10GB (1,187,684,027字节)
v7.4.2e.zip 1.13GB (1,224,725,360字节)
v7.4.2f.zip 1.13GB (1,224,665,260字节)
v7.4.2g.zip 937MB (983,320,160字节)
v7.4.2h.zip 195MB (205,145,357字节)
v7.4.2j.zip(v7.4.2j_ENTRY) 164MB (172,242,469字节)
601
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
