本文转载:http://wodexinlihua1.blog.163.com/blog/static/12396810820129993613817/
1.首先的确定solaris为手动配置模式
#netadm list
可以看出是手动还是自动,如果是自动,切换到手动。
#netadm enable -p ncp DefaultFixed
#netadm list
如果出现
netadm: DefaultFixed NCP is enabled;
automatic network management is not available.
netadm list' is only supported when automatic network management is active.
说明是手动状态。
创建net0
#ipadm create-ip net0
查看ip:
# ipadm show-addr
我的显示
net0/v4 192.168.1.250
如果想更改可以使用
#ipadm delete-addr net0/v4
命令删除,
#ipadm create-addr -T static -a 192.168.1.200/24 net0/v4
更改ip
如果想设置网关可以使用命令
#route -p add default 192.168.1.1
删除网关
#route delete default 192.168.1.1
本文转自:http://blog.csdn.net/dongxuebin/article/details/7793359
solaris11的ip配置找了好久,都没有什么用,基本上全是挂羊头卖狗肉的东西,打着solaris11的标题,讲solaris10的配置,百度了一个上午全是lolaris10的,各个写的很简单,搞的我都羞愧了,恶心着接着看,看到最后就知道这帮混蛋肯定没有成功,后来只能求助翻墙(伟大的绿色长城),最后在google里找到了Rachmat Febrianto大神的blog,终于成功了,下面讲解下我配置的过程。
不多说了我们开始吧
1.从自动网络配置模式转换为手动配置模式
验证NCP
- netadm list
netadm list
- netadm enable -p ncp DefaultFixed
netadm enable -p ncp DefaultFixed
2.确认DefaultFixed模式可用
- netadm list
- netadm: DefaultFixed NCP is enabled;
- automatic network management is not available.
- netadm list' is only supported when automatic network management is active.
netadm list
netadm: DefaultFixed NCP is enabled;
automatic network management is not available.
netadm list' is only supported when automatic network management is active.
3.确认要配置的接口
- # dladm show-phys
# dladm show-phys
4.配置net0
- # ipadm create-ip net0
- # ipadm create-addr -T static -a 192.168.56.200/24 net0/v4
- # ipadm show-addr
# ipadm create-ip net0
# ipadm create-addr -T static -a 192.168.56.200/24 net0/v4
# ipadm show-addr
5.配置网关
- # route -p add default 12.34.56.1
# route -p add default 12.34.56.1
6.配置DNS
- root@solaris:~# svccfg -s dns/client
- svc:/network/dns/client> setprop config/nameserver = (8.8.8.8 8.8.4.4)
- svc:/network/dns/client> listprop config
- config application
- config/value_authorization astring solaris.smf.value.name-service.dns.client
- config/nameserver net_address 8.8.8.8 8.8.4.4
- svc:/network/dns/client> exit
- root@solaris:~#
- root@solaris:~# svcadm refresh dns/client
- root@solaris:~# svcadm restart dns/client
root@solaris:~# svccfg -s dns/client
svc:/network/dns/client> setprop config/nameserver = (8.8.8.8 8.8.4.4)
svc:/network/dns/client> listprop config
config application
config/value_authorization astring solaris.smf.value.name-service.dns.client
config/nameserver net_address 8.8.8.8 8.8.4.4
svc:/network/dns/client> exit
root@solaris:~#
root@solaris:~# svcadm refresh dns/client
root@solaris:~# svcadm restart dns/client
7.配置name-server
- root@solaris:~# svccfg -s name-service/switch
- svc:/system/name-service/switch> setprop config/host ="files dns"
- svc:/system/name-service/switch> listprop config
- config application
- config/default astring files
- config/value_authorization astring solaris.smf.value.name-service.switch
- config/printer astring "user files"
- config/host astring "files dns"
- svc:/system/name-service/switch> exit
root@solaris:~# svccfg -s name-service/switch
svc:/system/name-service/switch> setprop config/host = "files dns"
svc:/system/name-service/switch> listprop config
config application
config/default astring files
config/value_authorization astring solaris.smf.value.name-service.switch
config/printer astring "user files"
config/host astring "files dns"
svc:/system/name-service/switch> exit
8.最关键一步验证
- root@solaris:~# ping google.com
- google.com is alive
root@solaris:~# ping google.com
google.com is alive
通过这些步骤,solaris11终于可以上网了,
顺便说一句:感谢制作翻墙软件的各个大侠们。