1. 通道(Channel)
- 通道(Channel):由java.nio.Channels包定义的。Channel表示IO源与目标打开的连接。Channel类似于传统中的“流”,只不过Channel本身不能直接访问数据,Channel只能与Buffer进行交互。
Channel在java NIO中负责缓冲区的数据传输。Channel本身不存在数据,因此需要配合缓冲区进行传输。
Java 为 Channel 接口提供的最主要实现类如下:
- FileChannel:用于读取、写入、映射和操作文件的通道。
- DatagramChannel:通过 UDP 读写网络中的数据通道。
- SocketChannel:通过 TCP 读写网络中的数据。
- ServerSocketChannel:可以监听新进来的 TCP 连接,对每一个新进来的连接都会创建一个SocketChannel
FileChannel常用方法
方 法 | 描 述 |
---|---|
int read(ByteBuffer dst) | 从Channel中读取数据到ByteBuffer |
long read(ByteBuffer[] dsts) | 将 Channel 中的数据“分散”到 ByteBuffer[] |
int write(ByteBuffer src) | 将 ByteBuffer 中的数据写入到 Channel |
long write(ByteBuffer[] srcs) | 将 ByteBuffer[] 中的数据“聚集”到 Channel |
long position() | 返回此通道的文件位置 |
FileChannel position(long p) | 设置此通道的文件位置 |
long size() | 返回此通道的文件的当前大小 |
FileChannel truncate(long s) | 将此通道的文件截取为给定大小 |
void force(boolean metaData) | 强制将所有对此通道的文件更新写入到存储设备中 |
2. 获取通道
有三种获取通道的方式:
- 对支持通道的对象调用getChannel()方法。
支持通道的类如下:
- FileInputStream
- FileOutputStream
- RandomAccessFile
- DatagramSocket
- Socket
- ServerSocket
-
使用Files类的静态方法newByteChannel()获取字节通道(NIO2)
-
通过通道的静态方法 open() 打开并返回指定通道(NIO2)
将 Buffer 中数据写入 Channel: write()
从 Channel 读取数据到 Buffer: read()
3. 通道的数据传输
- 利用通道实现文件的复制(非直接缓冲区)
public static void copyFile() {
long start = System.currentTimeMillis();
FileChannel outChannel = null;
FileChannel inChannel = null;
FileInputStream fis = null;
FileOutputStream fos = null;
try {
fis = new FileInputStream("E:\\demo\\Java网络编程(第4版).pdf");
fos = new FileOutputStream("E:\\demo\\Java网络编程(第4版copy).pdf");
//1. 获取通道
inChannel = fis.getChannel();
outChannel = fos.getChannel();
//分配指定大小的缓冲区
ByteBuffer buf = ByteBuffer.allocate(1024);
//将通道中的数据存入缓冲区
while (inChannel.read(buf) != -1) {
//切换到读取数据模式
buf.flip();
//将缓冲区的数据写入通道中
outChannel.write(buf);
//清空缓冲区
buf.clear();
}
} catch (Exception e) {
e.printStackTrace();
} finally {
if (outChannel != null){
try {
outChannel.close();
} catch (IOException e) {
e.printStackTrace();
}
}
if(inChannel != null){
try {
inChannel.close();
} catch (IOException e) {
e.printStackTrace();
}
}
if(fis != null){
try {
fis.close();
} catch (IOException e) {
e.printStackTrace();
}
}
if(fos != null){
try {
fos.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
System.out.println("耗费时间:"+(System.currentTimeMillis() - start));
}
- 使用直接缓冲区实现文件的复制(内存映射文件)
public static void copyFileByChannel(){
long start = System.currentTimeMillis();
try {
//获取通道
FileChannel inChannel = FileChannel.open(Paths.get("e:\\demo\\Java网络编程(第4版).pdf"), StandardOpenOption.READ);
FileChannel outChannel = FileChannel.open(Paths.get("e:\\demo\\Java网络编程(第4版copy).pdf"),StandardOpenOption.WRITE,StandardOpenOption.READ,StandardOpenOption.CREATE);
//内存映射文件
MappedByteBuffer inMappedBuf = inChannel.map(FileChannel.MapMode.READ_ONLY,0,inChannel.size());
MappedByteBuffer outMappedBuf = outChannel.map(FileChannel.MapMode.READ_WRITE,0,inChannel.size());
//直接对缓冲区进行数据的读写操作
byte[] dst = new byte[inMappedBuf.limit()];
inMappedBuf.get(dst);
outMappedBuf.put(dst);
inChannel.close();
outChannel.close();
} catch (IOException e) {
e.printStackTrace();
}
System.out.println("耗费时间:"+(System.currentTimeMillis() - start));
}
- 通道之间的数据传输(直接缓冲区)
public static void transfer(){
long start = System.currentTimeMillis();
try {
FileChannel inChannel = FileChannel.open(Paths.get("e:\\demo\\Java网络编程(第4版).pdf"),StandardOpenOption.READ);
FileChannel outChannel = FileChannel.open(Paths.get("e:\\demo\\Java网络编程(copy).pdf"),StandardOpenOption.READ,StandardOpenOption.WRITE,StandardOpenOption.CREATE);
inChannel.transferTo(0,inChannel.size(),outChannel);
inChannel.close();
outChannel.close();
} catch (IOException e) {
e.printStackTrace();
}
System.out.println("耗费时间:"+(System.currentTimeMillis() - start));
}
从效率上来看,第三种最快,第一种最慢
4. 零拷贝
-
public abstract long transferTo(long position, long count, WritableByteChannel target) 将当前channel的数据拷贝到target所指的channel
-
public abstract long transferFrom(ReadableByteChannel src,long position, long count) 将src所指的channel的数据拷贝到当前channel
5. 分散读取与聚集写入
- 分散读取(Scattering Reads)是指从Channel中读取的数据“分散”到多个 Buffer 中
- 聚集写入(Gathering Writes)是指将多个 Buffer 中的数据“聚集”
到 Channel。
注意:分散读取时按照缓冲区的顺序,从 Channel 中读取的数据依次将Buffer填满。聚集写入时按照缓冲区的顺序,写入 position 和 limit 之间的数据到 Channel 。
分散读取和聚集写入示例
/**
* 分散读取和聚集写入
*/
public static void randomAccess(){
try {
RandomAccessFile fromFile = new RandomAccessFile("e:\\demo\\test.txt","rw");
// 1. 获取通道
FileChannel inChannel = fromFile.getChannel();
//2、分配指定大小的缓冲区
ByteBuffer buf1 = ByteBuffer.allocate(512);
ByteBuffer buf2 = ByteBuffer.allocate(10240);
//分散读取
ByteBuffer[] bufs = {buf1,buf2};
inChannel.read(bufs);
for(ByteBuffer byteBuffer : bufs){
byteBuffer.flip();
}
System.out.println(new String(bufs[0].array(),0,bufs[0].limit()));
System.out.println("----------------");
System.out.println(new String(bufs[1].array(),0,bufs[1].limit()));
//聚集写入
RandomAccessFile toFrom = new RandomAccessFile("e:\\demo\\testCopy.txt","rw");
FileChannel outChannel = toFrom.getChannel();
outChannel.write(bufs);
} catch (Exception e) {
e.printStackTrace();
}
}
6. 编解码
public static void charset() throws Exception{
//查看支持的字符集列表
// Map<String, Charset> map = Charset.availableCharsets();
// for(Map.Entry <String, Charset> entry : map.entrySet()){
// System.out.println(entry.getKey()+"="+entry.getValue());
// }
//指定编码集
Charset c = Charset.forName("GBK");
//获取编码器
CharsetEncoder ce = c.newEncoder();
//获取解码器
CharsetDecoder cd = c.newDecoder();
CharBuffer cuf = CharBuffer.allocate(1024);
cuf.put("好好学习,天天向上");
cuf.flip();
//编码
ByteBuffer buffer = ce.encode(cuf);
for(int i = 0;i < 18; i++){
System.out.println(buffer.get());
}
//解码
buffer.flip();
CharBuffer charBuffer = cd.decode(buffer);
System.out.println(charBuffer.toString());
System.out.println("--------------------------------");
Charset cs2 = Charset.forName("UTF-8");
buffer.flip();
CharBuffer charBuffer1 = cs2.decode(buffer);
System.out.println(charBuffer1.toString());
}