Mac版chrome浏览器chrome84谷歌浏览器googlechrome.dmg
Mac版chrome浏览器chrome84谷歌浏览器googlechrome.dmg
mongodb-linux-x86_64-3.4.23.tgz
mongodb-linux-x86_64-3.4.23.tgz
mongodb-linux-x86_64-3.0.15.tgz
mongodb-linux-x86_64-3.0.15.tgz
mariadb-10.3.18.tar.gz
mariadb-10.3.18.tar.gz
mariadb-10.2.27.tar.gz
mariadb-10.2.27.tar.gz
mysql-boost-5.7.27.tar.gz
mysql mysql-boost-5.7.27.tar.gz
mysql源码安装包mysql-boost-5.7.22.zip
cmake \ -DCMAKE_INSTALL_PREFIX=/usr/local/mysql \ #[MySQL安装的根目录] -DMYSQL_DATADIR=/data/mysql \ #[MySQL数据库文件存放目录] -DSY
postgresql-9.6.12.tar.gz
tar -zxvf postgresql-9.6.0.tar.gz
cd postgresql-9.6.0
./configure
make
make install
cd ..
php-7.0.27.tar.gz
编译 ./configure --prefix=/usr/local/php --exec-prefix=/usr/local/php --bindir=/usr/local/php/bin --sbindir=/usr/local/php/sbin --includedir=/usr/local/php/include --libdir=/usr/local/php/lib/php --mandir=/usr/local/php/php/man --with-config-file-path=/usr/local/php/etc --with-mysql-sock=/var/run/mysql/mysql.sock --with-mcrypt=/usr /i nclude --with-mhash --with-openssl --with-mysql=shared,mysqlnd --with-mysqli=shared,mysqlnd --with-pdo-mysql=shared,mysqlnd --with-gd --with-iconv --with-zlib --enable-zip --enable-inline-optimization --disable-debug --disable-rpath --enable-shared --enable-xml --enable-bcmath --enable-shmop --enable-sysvsem --enable-mbregex --enable-mbstring --enable-ftp --enable-gd-native-ttf --enable-pcntl --enable-sockets --with-xmlrpc --enable-soap --without-pear --with-gettext --enable-session --with-curl --with-jpeg-dir --with-freetype-dir --enable-opcache --enable-fpm --enable-fastcgi --with-fpm-user=www --with-fpm-group=www --without-gdbm --with-mcrypt=/usr/local/apps/libmcrypt --disable-fileinfo 报错:1, **configure: error: system libzip must be upgraded to version >=**0.11。 使用Yum最新版只到0.10,不足以达到要求。 一、先删除libzip yum remove libzip -y SSH执行以上命令,先删除libzip 和 libzip-devel 二、下载安装并手动编译 wget https://nih.at/libzip/libzip-1.2.0.tar.gz tar -zxvf libzip-1.2.0.tar.gz cd libzip-1.2.0 ./configure make && make install 三、(可忽略)另外最新版本请参考官网:https://nih.at/libzip/ 1.5.0的libzip需要cmake wget https://libzip.org/download/libzip-1.5.0.tar.gz tar -zxvf libzip-* cd libzip* mkdir build && cd build && cmake .. && make && make install 报错2: error: off_t undefined; check your library configuration 根据报错信息分析 configure: error: off_t undefined; check your library configuration 未定义的类型 off_t。 off_t 类型是在 头文件 unistd.h中定义的,在32位系统 编程成 long int ,64位系统则编译成 long long int ,这里题主的系统应该是 64位的吧,在进行编译的时候 是默认查找64位的动态链接库,但是默认情况下 centos 的动态链接库配置文件/etc/ld.so.conf里并没有加入搜索路径,这个时候需要将 /usr/local/lib64 /usr/lib64 这些针对64位的库文件路径加进去。 采用下面的方法。 添加搜索路径到配置文件 echo '/usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64'>>/etc/ld.so.conf 然后 更新配置 ldconfig -v 再次执行 编译 成功 执行安装: make && make install 报错: /usr/local/include/zip.h:59:21: fatal error: zipconf.h: No such file or directory 解决: cp /usr/local/lib/libzip/include/zipconf.h /usr/local/include/zipconf.h 1 安装成功: 复制配置文件: cp php.ini-production /usr/local/php/lib/php.ini cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf ln -s /usr/local/php/sbin/php-fpm /usr/local/bin 修改配置: cd /usr/local/php/etc/php-fpm.d vim www.conf [www] //池子名 (pool) 设置 ;listen = /tmp/php-fcgi.sock // 监听的地址,可以监听socket ,也可以监听端口 listen = 127.0.0.1:8089 或者这样写,php-fpm 通常在本地使用,php和nginx 通常在一台机器,所以可写127.0.0.1,别的机器 连接,需用本机ip listen.mode = 666 //sock 文件的权限 listen.owner = nobody listen.group = nobody user = php-fpm group = php-fpm pm = dynamic pm.max_children = 50 pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 pm.max_requests = 500 rlimit_files = 1024 加入 systemtl 服务: cd /usr/local/src/php-7.3.0beta1/sapi/fpm cp php-fpm.service /usr/lib/systemd/system/ 启动: systemctl start php-fpm systemctl status php-fpm -l
cphalcon-3.4.4.zip
1. 从C源代码创建扩展请按照下面的步骤:
git clone --depth=1 "git://github.com/phalcon/cphalcon.git"
cd cphalcon/build
sudo ./install
2. 添加扩展到php.ini文件:
extension=phalcon.so
3. 最后,重启web服务器
cphalcon-3.1.2.tar.gz
1. 从C源代码创建扩展请按照下面的步骤:
git clone --depth=1 "git://github.com/phalcon/cphalcon.git"
cd cphalcon/build
sudo ./install
2. 添加扩展到php.ini文件:
extension=phalcon.so
3. 最后,重启web服务器
swoole-2 版本.zip
mkdir -p ~/build && \
cd ~/build && \
rm -rf ./swoole-src && \
curl -o ./tmp/swoole.tar.gz https://github.com/swoole/swoole-src/archive/master.tar.gz -L && \
tar zxvf ./tmp/swoole.tar.gz && \
mv swoole-src* swoole-src && \
cd swoole-src && \
phpize && \
./configure \
--enable-coroutine \
--enable-openssl \
--enable-http2 \
--enable-async-redis \
--enable-sockets \
--enable-mysqlnd && \
make clean && make && sudo make install
mysql源码安装包.zip
cmake . -DCMAKE_INSTALL_PREFIX=/home/mysql -DMYSQL_DATADIR=/home/mysql/data -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci -DMYSQL_TCP_PORT=3306 -DMYSQL_USER=mysql -DWITH_MYISAM_STORAGE_ENGINE=1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_MEMORY_STORAGE_ENGINE=1 -DENABLE_DOWNLOADS=1 -DDOWNLOAD_BOOST=1 -DWITH_BOOST=/usr/local/boost
php-5.6.29.tar.gz
编译 ./configure --prefix=/usr/local/php --exec-prefix=/usr/local/php --bindir=/usr/local/php/bin --sbindir=/usr/local/php/sbin --includedir=/usr/local/php/include --libdir=/usr/local/php/lib/php --mandir=/usr/local/php/php/man --with-config-file-path=/usr/local/php/etc --with-mysql-sock=/var/run/mysql/mysql.sock --with-mcrypt=/usr /i nclude --with-mhash --with-openssl --with-mysql=shared,mysqlnd --with-mysqli=shared,mysqlnd --with-pdo-mysql=shared,mysqlnd --with-gd --with-iconv --with-zlib --enable-zip --enable-inline-optimization --disable-debug --disable-rpath --enable-shared --enable-xml --enable-bcmath --enable-shmop --enable-sysvsem --enable-mbregex --enable-mbstring --enable-ftp --enable-gd-native-ttf --enable-pcntl --enable-sockets --with-xmlrpc --enable-soap --without-pear --with-gettext --enable-session --with-curl --with-jpeg-dir --with-freetype-dir --enable-opcache --enable-fpm --enable-fastcgi --with-fpm-user=www --with-fpm-group=www --without-gdbm --with-mcrypt=/usr/local/apps/libmcrypt --disable-fileinfo 报错:1, **configure: error: system libzip must be upgraded to version >=**0.11。 使用Yum最新版只到0.10,不足以达到要求。 一、先删除libzip yum remove libzip -y SSH执行以上命令,先删除libzip 和 libzip-devel 二、下载安装并手动编译 wget https://nih.at/libzip/libzip-1.2.0.tar.gz tar -zxvf libzip-1.2.0.tar.gz cd libzip-1.2.0 ./configure make && make install 三、(可忽略)另外最新版本请参考官网:https://nih.at/libzip/ 1.5.0的libzip需要cmake wget https://libzip.org/download/libzip-1.5.0.tar.gz tar -zxvf libzip-* cd libzip* mkdir build && cd build && cmake .. && make && make install 报错2: error: off_t undefined; check your library configuration 根据报错信息分析 configure: error: off_t undefined; check your library configuration 未定义的类型 off_t。 off_t 类型是在 头文件 unistd.h中定义的,在32位系统 编程成 long int ,64位系统则编译成 long long int ,这里题主的系统应该是 64位的吧,在进行编译的时候 是默认查找64位的动态链接库,但是默认情况下 centos 的动态链接库配置文件/etc/ld.so.conf里并没有加入搜索路径,这个时候需要将 /usr/local/lib64 /usr/lib64 这些针对64位的库文件路径加进去。 采用下面的方法。 添加搜索路径到配置文件 echo '/usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64'>>/etc/ld.so.conf 然后 更新配置 ldconfig -v 再次执行 编译 成功 执行安装: make && make install 报错: /usr/local/include/zip.h:59:21: fatal error: zipconf.h: No such file or directory 解决: cp /usr/local/lib/libzip/include/zipconf.h /usr/local/include/zipconf.h 1 安装成功: 复制配置文件: cp php.ini-production /usr/local/php/lib/php.ini cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf ln -s /usr/local/php/sbin/php-fpm /usr/local/bin 修改配置: cd /usr/local/php/etc/php-fpm.d vim www.conf [www] //池子名 (pool) 设置 ;listen = /tmp/php-fcgi.sock // 监听的地址,可以监听socket ,也可以监听端口 listen = 127.0.0.1:8089 或者这样写,php-fpm 通常在本地使用,php和nginx 通常在一台机器,所以可写127.0.0.1,别的机器 连接,需用本机ip listen.mode = 666 //sock 文件的权限 listen.owner = nobody listen.group = nobody user = php-fpm group = php-fpm pm = dynamic pm.max_children = 50 pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 pm.max_requests = 500 rlimit_files = 1024 加入 systemtl 服务: cd /usr/local/src/php-7.3.0beta1/sapi/fpm cp php-fpm.service /usr/lib/systemd/system/ 启动: systemctl start php-fpm systemctl status php-fpm -l
php-7.1.29.tar.gz
编译 ./configure --prefix=/usr/local/php --exec-prefix=/usr/local/php --bindir=/usr/local/php/bin --sbindir=/usr/local/php/sbin --includedir=/usr/local/php/include --libdir=/usr/local/php/lib/php --mandir=/usr/local/php/php/man --with-config-file-path=/usr/local/php/etc --with-mysql-sock=/var/run/mysql/mysql.sock --with-mcrypt=/usr /i nclude --with-mhash --with-openssl --with-mysql=shared,mysqlnd --with-mysqli=shared,mysqlnd --with-pdo-mysql=shared,mysqlnd --with-gd --with-iconv --with-zlib --enable-zip --enable-inline-optimization --disable-debug --disable-rpath --enable-shared --enable-xml --enable-bcmath --enable-shmop --enable-sysvsem --enable-mbregex --enable-mbstring --enable-ftp --enable-gd-native-ttf --enable-pcntl --enable-sockets --with-xmlrpc --enable-soap --without-pear --with-gettext --enable-session --with-curl --with-jpeg-dir --with-freetype-dir --enable-opcache --enable-fpm --enable-fastcgi --with-fpm-user=www --with-fpm-group=www --without-gdbm --with-mcrypt=/usr/local/apps/libmcrypt --disable-fileinfo 报错:1, **configure: error: system libzip must be upgraded to version >=**0.11。 使用Yum最新版只到0.10,不足以达到要求。 一、先删除libzip yum remove libzip -y SSH执行以上命令,先删除libzip 和 libzip-devel 二、下载安装并手动编译 wget https://nih.at/libzip/libzip-1.2.0.tar.gz tar -zxvf libzip-1.2.0.tar.gz cd libzip-1.2.0 ./configure make && make install 三、(可忽略)另外最新版本请参考官网:https://nih.at/libzip/ 1.5.0的libzip需要cmake wget https://libzip.org/download/libzip-1.5.0.tar.gz tar -zxvf libzip-* cd libzip* mkdir build && cd build && cmake .. && make && make install 报错2: error: off_t undefined; check your library configuration 根据报错信息分析 configure: error: off_t undefined; check your library configuration 未定义的类型 off_t。 off_t 类型是在 头文件 unistd.h中定义的,在32位系统 编程成 long int ,64位系统则编译成 long long int ,这里题主的系统应该是 64位的吧,在进行编译的时候 是默认查找64位的动态链接库,但是默认情况下 centos 的动态链接库配置文件/etc/ld.so.conf里并没有加入搜索路径,这个时候需要将 /usr/local/lib64 /usr/lib64 这些针对64位的库文件路径加进去。 采用下面的方法。 添加搜索路径到配置文件 echo '/usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64'>>
php-7.2.20.tar.gz
编译 ./configure --prefix=/usr/local/php --exec-prefix=/usr/local/php --bindir=/usr/local/php/bin --sbindir=/usr/local/php/sbin --includedir=/usr/local/php/include --libdir=/usr/local/php/lib/php --mandir=/usr/local/php/php/man --with-config-file-path=/usr/local/php/etc --with-mysql-sock=/var/run/mysql/mysql.sock --with-mcrypt=/usr /i nclude --with-mhash --with-openssl --with-mysql=shared,mysqlnd --with-mysqli=shared,mysqlnd --with-pdo-mysql=shared,mysqlnd --with-gd --with-iconv --with-zlib --enable-zip --enable-inline-optimization --disable-debug --disable-rpath --enable-shared --enable-xml --enable-bcmath --enable-shmop --enable-sysvsem --enable-mbregex --enable-mbstring --enable-ftp --enable-gd-native-ttf --enable-pcntl --enable-sockets --with-xmlrpc --enable-soap --without-pear --with-gettext --enable-session --with-curl --with-jpeg-dir --with-freetype-dir --enable-opcache --enable-fpm --enable-fastcgi --with-fpm-user=www --with-fpm-group=www --without-gdbm --with-mcrypt=/usr/local/apps/libmcrypt --disable-fileinfo 报错:1, **configure: error: system libzip must be upgraded to version >=**0.11。 使用Yum最新版只到0.10,不足以达到要求。 一、先删除libzip yum remove libzip -y SSH执行以上命令,先删除libzip 和 libzip-devel 二、下载安装并手动编译 wget https://nih.at/libzip/libzip-1.2.0.tar.gz tar -zxvf libzip-1.2.0.tar.gz cd libzip-1.2.0 ./configure make && make install 三、(可忽略)另外最新版本请参考官网:https://nih.at/libzip/ 1.5.0的libzip需要cmake wget https://libzip.org/download/libzip-1.5.0.tar.gz tar -zxvf libzip-* cd libzip* mkdir build && cd build && cmake .. && make && make install 报错2: error: off_t undefined; check your library configuration 根据报错信息分析 configure: error: off_t undefined; check your library configuration 未定义的类型 off_t。 off_t 类型是在 头文件 unistd.h中定义的,在32位系统 编程成 long int ,64位系统则编译成 long long int ,这里题主的系统应该是 64位的吧,在进行编译的时候 是默认查找64位的动态链接库,但是默认情况下 centos 的动态链接库配置文件/etc/ld.so.conf里并没有加入搜索路径,这个时候需要将 /usr/local/lib64 /usr/lib64 这些针对64位的库文件路径加进去。 采用下面的方法。 添加搜索路径到配置文件 echo '/usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64'>>
php-7.3.7.tar.gz
编译 ./configure --prefix=/usr/local/php --exec-prefix=/usr/local/php --bindir=/usr/local/php/bin --sbindir=/usr/local/php/sbin --includedir=/usr/local/php/include --libdir=/usr/local/php/lib/php --mandir=/usr/local/php/php/man --with-config-file-path=/usr/local/php/etc --with-mysql-sock=/var/run/mysql/mysql.sock --with-mcrypt=/usr /include --with-mhash --with-openssl --with-mysql=shared,mysqlnd --with-mysqli=shared,mysqlnd --with-pdo-mysql=shared,mysqlnd --with-gd --with-iconv --with-zlib --enable-zip --enable-inline-optimization --disable-debug --disable-rpath --enable-shared --enable-xml --enable-bcmath --enable-shmop --enable-sysvsem --enable-mbregex --enable-mbstring --enable-ftp --enable-gd-native-ttf --enable-pcntl --enable-sockets --with-xmlrpc --enable-soap --without-pear --with-gettext --enable-session --with-curl --with-jpeg-dir --with-freetype-dir --enable-opcache --enable-fpm --enable-fastcgi --with-fpm-user=www --with-fpm-group=www --without-gdbm --with-mcrypt=/usr/local/apps/libmcrypt --disable-fileinfo 报错:1, **configure: error: system libzip must be upgraded to version >=**0.11。 使用Yum最新版只到0.10,不足以达到要求。 一、先删除libzip yum remove libzip -y SSH执行以上命令,先删除libzip 和 libzip-devel 二、下载安装并手动编译 wget https://nih.at/libzip/libzip-1.2.0.tar.gz tar -zxvf libzip-1.2.0.tar.gz cd libzip-1.2.0 ./configure make && make install 三、(可忽略)另外最新版本请参考官网:https://nih.at/libzip/ 1.5.0的libzip需要cmake wget https://libzip.org/download/libzip-1.5.0.tar.gz tar -zxvf libzip-* cd libzip* mkdir build && cd build && cmake .. && make && make install 报错2: error: off_t undefined; check your library configuration 根据报错信息分析 configure: error: off_t undefined; check your library configuration 未定义的类型 off_t。 off_t 类型是在 头文件 unistd.h中定义的,在32位系统 编程成 long int ,64位系统则编译成 long long int ,这里题主的系统应该是 64位的吧,在进行编译的时候 是默认查找64位的动态链接库,但是默认情况下 centos 的动态链接库配置文件/etc/ld.so.conf里并没有加入搜索路径,这个时候需要将 /usr/local/lib64 /usr/lib64 这些针对64位的库文件路径加进去。 采用下面的方法。 添加搜索路径到配置文件 echo '/usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64'>>/etc/ld.so.conf 然后 更新配置 ldconfig -v 再次执行 编译 成功 执行安装: make && make install 报错: /usr/local/include/zip.h:59:21: fatal error: zipconf.h: No such file or directory 解决: cp /usr/local/lib/libzip/include/zipconf.h /usr/local/include/zipconf.h 1 安装成功: 复制配置文件: cp php.ini-production /usr/local/php/lib/php.ini cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf ln -s /usr/local/php/sbin/php-fpm /usr/local/bin 修改配置: cd /usr/local/php/etc/php-fpm.d vim www.conf [www] //池子名 (pool) 设置 ;listen = /tmp/php-fcgi.sock // 监听的地址,可以监听socket ,也可以监听端口 listen = 127.0.0.1:8089 或者这样写,php-fpm 通常在本地使用,php和nginx 通常在一台机器,所以可写127.0.0.1,别的机器 连接,需用本机ip listen.mode = 666 //sock 文件的权限 listen.owner = nobody listen.group = nobody user = php-fpm group = php-fpm pm = dynamic pm.max_children = 50 pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 pm.max_requests = 500 rlimit_files = 1024 加入 systemtl 服务: cd /usr/local/src/php-7.3.0beta1/sapi/fpm cp php-fpm.service /usr/lib/systemd/system/ 启动: systemctl start php-fpm systemctl status php-fpm -l
php-7.2.32.tar.gz
php-7.2.32.tar.gz
php-7.3.20.tar.gz
php-7.3.20.tar.gz
php-7.4.6.tar.gz
php-7.4.6.tar.gz
php-7.3.16.tar.gz
php-7.3.16.tar.gz
vc_redist.rar
vc_redist ,VC10,VC12,VC14运行库(x86 & x64 包含全部版本安装包 )
php-7.2.23.tar.gz
php-7.2.23.tar.gz
postgresql-10.10.tar.bz2
postgresql-10.10.tar.bz2
postgresql-11.5.tar.bz2
postgresql-11.5.tar.bz2 postgresql-11.5.tar.bz2 postgresql-11.5.tar.bz2
apache安装包及其依赖.zip
apache安装包及其依赖.zip
https://blog.csdn.net/hualaoshuan/article/details/90753063
elasticsearch6.3.2.zip
elasticsearch-6.3.2.tar.gz
rabbitmq及php扩展.zip
amqp-1.9.0.tgz ; rabbitmq-c-0.8.0.tar.gz ; rabbitmq-server-generic-unix-3.6.9.tar; 安装文档https://www.cnblogs.com/mmmzh/p/10084004.html
mongodb-1.6.0.tgz php扩展
mongodb-1.6.0.tgz php扩展
mongodb-osx-ssl-x86_64-3.6.14.tgz mac版
mongodb-osx-ssl-x86_64-3.6.14.tgz mac版
mac版 mongodb-osx-ssl-x86_64-3.0.15.tgz
mac版 mongodb-osx-ssl-x86_64-3.0.15.tgz