MTK无线驱动配置文件参数

MTK的默认配置文件

#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=CN
BssidNum=1
SSID1=TEST
SSID2=22
SSID3=33
SSID4=44
WirelessMode=9
TxRate=0
Channel=11
BasicRate=15
BeaconPeriod=100
DtimPeriod=1
TxPower=100
DisableOLBC=0
BGProtection=0
MaxStaNum=0
TxPreamble=1
RTSThreshold=2347HT_MIMOPSMode
FragThreshold=2346
TxBurst=1
PktAggregate=0
TurboRate=0
WmmCapable=0
APSDCapable=0
DLSCapable=0
NoForwarding=0
NoForwardingBTNBSSID=0
HideSSID=0
StationKeepAlive=0
ShortSlot=1
AutoChannelSelect=0
IEEE8021X=0
IEEE80211H=0
CSPeriod=10
WirelessEvent=0
IdsEnable=0
AuthFloodThreshold=32
AssocReqFloodThreshold=32
ReassocReqFloodThreshold=32
ProbeReqFloodThreshold=32
DisassocFloodThreshold=32
DeauthFloodThreshold=32
EapReqFooldThreshold=32
PreAuth=0
AuthMode=OPEN
EncrypType=NONE
RekeyInterval=0
RekeyMethod=DISABLE
PMKCachePeriod=10
WPAPSK1=
WPAPSK2=
WPAPSK3=
WPAPSK4=
DefaultKeyID=1
Key1Type=0
Key1Str1=
Key1Str2=
Key1Str3=
Key1Str4=
Key2Type=0
Key2Str1=
Key2Str2=
Key2Str3=
Key2Str4=
Key3Type=0
Key3Str1=
Key3Str2=
Key3Str3=
Key3Str4=
Key4Type=0
Key4Str1=
Key4Str2=
Key4Str3=
Key4Str4=
HSCounter=0
AccessPolicy0=0
AccessControlList0=
AccessPolicy1=0
AccessControlList1=
AccessPolicy2=0
AccessControlList2=
AccessPolicy3=0
AccessControlList3=
WdsEnable=0
WdsEncrypType=NONE
WdsList=
WdsKey=
RADIUS_Server=0.0.0.0
RADIUS_Port=
RADIUS_Key=ralink
own_ip_addr=0.0.0.0
EAPifname=br0
PreAuthifname=br0
HT_HTC=0
HT_RDG=0
HT_EXTCHA=0
HT_LinkAdapt=0
HT_OpMode=0
HT_MpduDensity=5
HT_BW=1
HT_AutoBA=1
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_LDPC=0
HT_MCS=33
VHT_BW=1
VHT_SGI=1
VHT_STBC=0
VHT_BW_SIGNAL=0
VHT_DisallowNonVHT=0
VHT_LDPC=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
WscManufacturer=
WscModelName=
WscDeviceName=
WscModelNumber=
WscSerialNumber=
RadioOn=1
PMFMFPC=0
PMFMFPR=0
PMFSHA256=0
LoadCodeMethod=0
E2pAccessMode=4
bBssCoexEnable=0

参数的意义

[CountryRegion]
description : Country region for WLAN radio 2.4G HZ regulation
example : CountryRegion=5
value : 0~7,31,32,33
remarks :
Region Channels
0 1-11
1 1-13
2 10-11
3 10-13
4 14
5 1-14
6 3-9
7 5-13
31 1-14
32 1-11 active scan, 12 and 13 passive scan
33 1-14 all active scan, 14 b mode only

[CountryRegionABand]
Description: Country region for WLAN radio 5G HZ regulation
example : CountryRegionABand=7
value : 0~11
remarks :
Region Channels
0 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
1 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
2 36, 40, 44, 48, 52, 56, 60, 64
3 52, 56, 60, 64, 149, 153, 157, 161
4 149, 153, 157, 161, 165
5 149, 153, 157, 161
6 36, 40, 44, 48
7 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
8 52, 56, 60, 64
9 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165
10 36, 40, 44, 48, 149, 153, 157, 161, 165
11 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161

[CountryCode]
example : CountryCode= ( Default is empty)
remarks :
2 characters, like TW for Taiwan.
Please refer to ISO3166 code list for other countries and can be found at
http://www.iso.org/iso/prods-services/iso3166ma/02iso-3166-codelists/country_names_and_code_elements

[SSID]
Description : The target BSSID string name
examples : SSID=DYX-AP
remarks : 0~z, 1~32 ASCII characters

[WirelessMode]
example : WirelessMode=5
value : 0~15
remarks :
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only
3: legacy 11a/b/g mixed
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
10: 11AGN mixed
11: 11N only in 5G band only
12: 11AC/A/AN/B/G/GN mixed (Only 11AC chipset support)
13: 11AC/A/AN/G/GN mixed (Only 11AC chipset support)
14: 11A/AN/AC mixed 5G band only (Only 11AC chipset support)
15: 11AC/AN mixed in 5G band (Only 11AC chipset support)

[Channel]
example : Channel=0
remarks :
Depends on CountryRegion or CountryRegionForABand.
Default value = 0, the driver scan BSSID’s channel automatically

[BeaconPeriod]
Description : Beacon period setting (It is SoftAP only)
example ： BeaconPeriod=100

[DtimPeriod]
Description:DTIM setting
Value : 1~255

[TxPower]
Description: WLAN Radio Transmit Power setting in percentage
example ： TxPower=100
Value : 0~100

[DisableOLBC]
0: auto
1: disable protection
Normally 11g AP should detect OLBC. If disabled, AP will enter protection mode only when legacy device associated.

[BGProtection]
Description: Enable/disable WLAN 11B or 11G protection
Value : 0 , 1
example : BGProtection=0
remarks :
0: disable
1: enable

[MaxStaNum]
Description: 设置限制每个BSS关联客户端的最大数量。
value：
0: disable this function, 相当于无限制
1~32 现在个数为1~32

[TxPreamble]
Description: Enable or disable Tx preamble
Value : 0 , 1
example : TxPreamble=0
remarks :
0: disable
1: enable

[RTSThreshold]
Description: Set RTS Threshold
Value : 1~2347
example : RTSThreshold=2347

[FragThreshold]
Description: Set Fragment threshold
Value : 256~2346
example : FragThreshold=2346

[TxBurst]
Description: Enable or disable Tx burst
Value : 0 , 1
example : TxBurst=1
remarks :
0: disable
1: enable

[PktAggregate]
Description: Enable or disable Tx Aggregate
Value : 0 , 1
example : PktAggregate=0
remarks :
0: disable
1: enable

[WmmCapable]
Description: Enable or disable WMM QOS function
Value : 0 , 1
example : WmmCapable=1
remarks :
0: disable
1: enable

[APSDCapable]
Description: Enable or disable APSD Capable support
Value:
APSDCapable=0
0: disable
1: enable

[AckPolicy]
Description: Ack policy supports normal Ack or no Ack (AC_BK, AC_BE, AC_VI, AC_VO)
Value : 0,1
example : AckPolicy=0;0;0;0
remarks :
0: No ack
1: normal Ack

[WirelessEvent]
Description: Enable or disable driver to send Linux Wireless event support.
Value:
WirelessEvent=0
0: disable
1: enable

[AuthMode]
Description: WLAN security Authentication mode
Value : OPEN , SHARED , WEPAUTO , WPAPSK , WPA2PSK , WPA , WPA2
example : AuthMode=OPEN
remarks :
OPEN For open system
SHARED For shared key system
WEPAUTO Auto switch between OPEN and SHARED
WPAPSK For WPA pre-shared key (Infra)
WPA2PSK For WPA2 pre-shared key (Infra)
WPANONE For WPA pre-shared key (Adhoc)
WPA For enterprise mode (Need wpa_supplicant)
WPA2 For enterprise mode (Need wpa_supplicant)

[EncrypType]
Description: WLAN security Encryption type
Value : NONE , WEP , TKIP , AES
example : EncrypType=NONE
remarks :
NONE For AuthMode=OPEN
WEP For AuthMode=OPEN or AuthMode=SHARED
TKIP For AuthMode=WPAPSK or WPA2PSK
AES For AuthMode=WPAPSK or WPA2PSK

[WPAPSK]
Description: WLAN Security string for (TKIP/AES)
Value :
example : WPAPSK=
remarks :
8~63 ASCII
Or
64 HEX characters

[DefaultKeyID]
Description: Default key ID
Value : 1~4
example : DefaultKeyID=1

[Key1Type][Key2Type][Key3Type][Key4Type]
Description: Key 1 type
Value : 0 , 1
example : Key1Type=0
remarks :
0: Hexadecimal type
1: ASCII type

[Key1Str][Key2Str][Key3Str][Key4Str]
Description: Key 1 string
example : Key1Str=
remarks :
10 or 26 characters (key type=0)
5 or 13 characters (key type=1)

[HT_RDG]
Description: Enable or disable HT Reverse Direction Grant
Value:
HT_RDG=1
0: disable
1: enable

[HT_EXTCHA]
Description: To locate the 40MHz channel in combination with the control
Value:
HT_EXTCHA=0
0: Below
1: Above

[HT_OpMode]
Description: HT operation mode
Value:
HT_OpMode=0
0: HT mixed mode
1: HT Greenfield mode
2.1.40 HT_MpduDensity
Description: Minimum separation of MPDUs in an A-MPDU
Value:
HT_MpduDensity=4
0~7
0: no restriction
1: 1/4 μs
2: 1/2 μs
3: 1 μs
4: 2 μs
5: 4 μs
6: 8 μs
7: 16 μs

[HT_BW]
Description: HT channel Bandwidth
Value:
HT_BW=1
0: 20 MHz
1: 40 MHz
2.1.42 HT_BADecline

[HT_AutoBA]
Description: Enable or disable auto build Block Ack section with peer
Value:
HT_AutoBA=1
0: disable
1: enable

[HT_AMSDU]
Description: Enable or disable AMSDU section
Value:
HT_AMSDU=0
0: disable
1: enable

[HT_BAWinSize]
Description: Block Ack window size
Value:
HT_BAWinSize=64
1~64

[HT_GI]
Description: HT Guard interval support
Value:
HT_GI=1
0: Long guard interval
1: short guard interval

[HT_MCS]
Description: WLAN Modulation and Coding Scheme (MCS)
Value:
HT_MCS=33
0 ~15, 32: Fix MCS rate for HT rate.
33: Auto Rate Adaption, recommended

[VHT_BW]
Description: VHT channel Bandwidth
Value:
VHT_BW=1
0: 20/40 MHz
1: 80 MHz
[IEEE80211H]
Description: Enable or disable IEEE 802.11h function. Spectrum management.
This field can only be enabled in A band.
Value:
IEEE80211H=0
0: disable
1: enable

[WscManufacturer]
Description: WPS manufacturer string
Value:
WscManufacturer=
Less than 64 characters

[WscModelName]
Description: WPS Mode name string
Value:
WscModelName=
Less than 32 characters

[WscDeviceName]
Description: WPS Device name string
Value:
WscDeviceName=
Less than 32 characters

[WscModelNumber]
Description: WPS Device model number string
Value:
WscModelNumber=
Less than 32 characters

[WscSerialNumber]
Description: WPS serial number string
Value:
WscSerialNumber=
Less than 32 characters

[RadioOn]
Description: Enable or disable RF
Value:
RadioOn=1
0: disable
1: enable

[E2pAccessMode]
Description: Eeprom Access Mode

[bBssCoexEnable]
Description: 设置启用或禁用coexist支持。
value：
0: disable
1: enable
开启的话是支持coexist，相当于20MHz/40MHz带宽，若为0，则为40MHz带宽模式