Copier Reduction
Description
What do you do if you need to copy a 560x400mm image onto a standard sheet of US letter-size paper (which is about 216x280mm), while keeping the image as large as possible? You can rotate the image 90 degrees (so that it is in "landscape" mode), then reduce it to 50% of its original size so that it is 200x280mm. Then it will fit on the paper without overlapping any edges. Your job is to solve this problem in general.
Input
The input consists of one or more test cases, each of which is a single line containing four positive integers A, B, C, and D, separated by a space, representing an AxBmm image and a CxDmm piece of paper. All inputs will be less than one thousand. Following the test cases is a line containing four zeros that signals the end of the input.
Output
For each test case, if the image fits on the sheet of paper without changing its size (but rotating it if necessary), then the output is 100%. If the image must be reduced in order to fit, the output is the largest integer percentage of its original size that will fit (rotating it if necessary). Output the percentage exactly as shown in the examples below. You can assume that no image will need to be reduced to less than 1% of its original size, so the answer will always be an integer percentage between 1% and 100%, inclusive.
Sample Input 560 400 218 280 10 25 88 10 8 13 5 1 9 13 10 6 199 333 40 2 75 90 218 280 999 99 1 10 0 0 0 0 Sample Output 50% 100% 12% 66% 1% 100% 1% Source |
[Submit] [Go Back] [Status] [Discuss]
ACcode:
#pragma warning(disable:4786)//使命名长度不受限制
#pragma comment(linker, "/STACK:102400000,102400000")//手工开栈
#include <map>
#include <set>
#include <queue>
#include <cmath>
#include <stack>
#include <cctype>
#include <cstdio>
#include <cstring>
#include <stdlib.h>
#include <iostream>
#include <algorithm>
#define rd(x) scanf("%d",&x)
#define rd2(x,y) scanf("%d%d",&x,&y)
#define rds(x) scanf("%s",x)
#define rdc(x) scanf("%c",&x)
#define ll long long int
#define maxn 100005
#define mod 1000000007
#define INF 0x3f3f3f3f //int 最大值
#define FOR(i,f_start,f_end) for(int i=f_start;i<=f_end;++i)
#define MT(x,i) memset(x,i,sizeof(x))
#define PI acos(-1.0)
#define E exp(1)
using namespace std;
int main(){
double a,b,c,d;
while(cin>>a>>b>>c>>d&&(a||b||c||d)){
int ccc;
if(a>b)
swap(a,b);
if(c>d)
swap(c,d);
double h=c/a;
double s=d/b;
if(h>s)
swap(h,s);
if(h>=1&&s>=1)
printf("100");
else printf("%d",(ccc=h*100));
putchar('\%');
putchar('\n');
}
return 0;
}