(OK)(OK) seem-tools-CLI-semi-auto.sh---nic1_2-hostonly-bridged

于 2016-06-29 22:51:31 发布
阅读量678 收藏
点赞数
分类专栏： Android平台/移动互联网 SDN/虚拟化/NS3/Docker OK Linux—10—Shell编程
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/ztguang/article/details/51786515
版权 
#!/bin/sh

#------------------------------------------------------------------------------------------
# This tool (seem-tools-CLI-semi-auto.sh) is released under GNU GPL v2,v3
# Author: Tongguang Zhang
# Date: 2016-06-18
#
# Note, Prerequisites for using this script:  You have already installed Docker and NS3.
# Path in my notebook:
# NS3: /opt/tools/network_simulators/ns3/ns-allinone-3.25/
#------------------------------------------------------------------------------------------

#------------------------------------------------------------------------------------------
# (OK)(OK)(All in CLI) Fedora23 + Docker(centos-manet) + NS3 + MANETs - testing
#------------------------------------------------------------------------------------------

#------------------------------------------------------------------------------------------
# function create_docker()
# Description:
# create $docker_node_num of dockers
# receive two parameters, that are docker_node_num, docker_image
#------------------------------------------------------------------------------------------

create_docker(){    

    # $1, that is, docker_node_num
    # $2, that is, docker_image

    # You will also have to make sure that your kernel has ethernet filtering (ebtables, bridge-nf,
    # arptables) disabled. If you do not do this, only STP and ARP traffic will be allowed to
    # flow across your bridge and your whole scenario will not work.
    cd /proc/sys/net/bridge
    for f in bridge-nf-*; do echo 0 > $f; done
    cd -

    # [root@localhost ~]# man ip-netns
    # By convention a named network namespace is an object at /var/run/netns/NAME that can be opened.
    # The file descriptor resulting from opening /var/run/netns/NAME refers to the specified network
    # namespace. Holding that file descriptor open keeps the network namespace alive.
    # The file descriptor can be used with the setns(2) system
    # call to change the network namespace associated with a task.

    rm /var/run/netns -rf &>/dev/null
    mkdir -p /var/run/netns &>/dev/null

    # $1, that is, docker_node_num
    # $2, that is, docker_image

    for((id=1; id<=$1; id++))
    do

        # to determine whether docker_image exists
        vm_image="$2"
        exists=`docker images | awk -F \" '{print $1}' | grep ${vm_image} | wc -l | cat`
        if [ $exists -eq 0 ]; then
            echo "${vm_image} does not exist"
            exit
        fi

        # docker run -it --rm --net='none' --name "docker_${id}" centos-manet /bin/sh
        # gnome-terminal -x bash -c "docker run -it --rm --net='none' --name \"docker_${id}\" centos-manet /bin/sh"
        # gnome-terminal -x bash -c "docker run -it --rm --net='none' --name \"docker_${id}\" $2 /bin/sh"

        #gnome-terminal -x bash -c "docker run -it --rm --net='none' --name \"docker_${id}\" $2"
        # kernel network capabilities are not enabled by default.
        # You are going to need to run your container with --privileged
        gnome-terminal -x bash -c "docker run --privileged -it -d --net='none' --name \"docker_${id}\" $2"
        sleep 2
        docker exec docker_${id} /bin/sh -c "sed -i '21a \ router-id 10.1.0.${id}' /usr/local/etc/ospf6d.conf"
        docker exec docker_${id} /bin/sh -c "zebra -d &>/dev/null"
        docker exec docker_${id} /bin/sh -c "ospf6d -d &>/dev/null"

        # SET VARIABLES
        # get PID of CONTAINER
        pid=$(docker inspect -f '{{.State.Pid}}' "docker_${id}")
        bridge="br_d_${id}"
        tap="tap_d_${id}"
        veth="veth_${id}"
        deth="deth_${id}"

        brctl addbr ${bridge}

        ip link add ${veth} type veth peer name ${deth}
        brctl addif ${bridge} ${veth}
        ip link set ${veth} up
        #ifconfig ${veth} 0.0.0.0 promisc up

        ip link set ${deth} netns ${pid}

        tunctl -t ${tap}
        ifconfig ${tap} 0.0.0.0 promisc up

        brctl addif ${bridge} ${tap}
        ifconfig ${bridge} up
        #ifconfig ${bridge} 0.0.0.0 promisc up

        ln -s /proc/${pid}/ns/net /var/run/netns/${pid}

        ip netns exec ${pid} ip link set dev ${deth} name eth0
        ip netns exec ${pid} ip link set eth0 up
        ip netns exec ${pid} ip addr add 192.168.26.${id}/24 dev eth0
    done

}

#------------------------------------------------------------------------------------------
# function destroy_docker()
# Description:
# destroy $docker_node_num of dockers
# receive one parameter, that is docker_node_num
#------------------------------------------------------------------------------------------

destroy_docker(){

    # $1, that is, $docker_node_num
    for((id=1; id<=$1; id++))
    do
        bridge="br_d_${id}"
        tap="tap_d_${id}"
        veth="veth_${id}"

        ifconfig ${bridge} down &>/dev/null
        brctl delif ${bridge} ${tap} &>/dev/null
        brctl delbr ${bridge} &>/dev/null

        ifconfig ${tap} down &>/dev/null
        tunctl -d ${tap} &>/dev/null
        ifconfig ${veth} down &>/dev/null

        docker stop "docker_${id}" &>/dev/null
        docker rm "docker_${id}" &>/dev/null
    done
}


#------------------------------------------------------------------------------------------
# So far, OK OK OK
#------------------------------------------------------------------------------------------


#--------------------------------------------------------------------------
# (OK)(OK)(All in CLI) running two Android-x86 which connect to NS3(MANETs) via "ethernet bridge"
#--------------------------------------------------------------------------
# ip route add 192.168.26.0/24 dev br_a_1
# adb devices
# adb root

# adb connect 192.168.56.101:5555
# adb devices
# adb -s 192.168.56.101:5555 root
# adb -s 192.168.56.101:5555 shell

# adb disconnect 192.168.56.102:5555

# VBoxManage controlvm android-x86_64-6.0-rc1-1 poweroff

#------------------------------------------------------------------------------------------
# function create_android()
# Description:
# create $android_node_num of dockers
# receive three parameters, that are docker_node_num, android_node_num, VM_image
#------------------------------------------------------------------------------------------

create_android(){    

    # $1, that is, docker_node_num
    # $2, that is, android_node_num
    # $3, that is, VM_image
    # $4, that is, PATH of *.vdi

    host1=$[$1+1]

    for((id=1; id<=$2; id++))
    do

        # to determine whether VM_image exists
        # vm_image=$3${id}
        # exists=`VBoxManage list vms | awk -F \" '{print $2}' | grep ${vm_image} | wc -l | cat`
        # if [ $exists -eq 0 ]; then
        #     echo "${vm_image} does not exist"
        #     exit
        # fi

        # SET VARIABLES
        bridge="br_a_${id}"
        tap="tap_a_${id}"

        host0=$[100+id]
        eth0_a_ip="192.168.56.${host0}"
        eth1_a_ip="192.168.26.${host1}"

        tunctl -t ${tap}
        ip link set up dev ${tap}
        brctl addbr ${bridge}
        brctl addif ${bridge} ${tap}
        ip link set up dev ${bridge}
        ifconfig ${bridge} up

        # VBoxManage modifyvm android-x86_64-6.0-rc1-${id} --memory 1024 --nic1 hostonly --nictype1 Am79C973 --hostonlyadapter1 vboxnet0  --nic2 bridged --bridgeadapter2 ${bridge}
        # VBoxManage startvm android-x86_64-6.0-rc1-${id}
        # gnome-terminal -x bash -c "VBoxManage startvm android-x86_64-6.0-rc1-${id}"

        # VBoxManage hostonlyif create
        # VBoxManage hostonlyif ipconfig vboxnet0 --ip 10.0.0.10 --netmask 255.255.255.0

        # VBoxManage list hostonlyifs
        # VBoxManage list dhcpservers
        # VBoxManage list bridgedifs

        # VBoxManage modifyvm $3${id} --nic1 hostonly --nictype1 Am79C973 --hostonlyadapter1 vboxnet0 --nic2 bridged --bridgeadapter2 ${bridge}
        # NOTE: (vboxnet0 - 192.168.56) (vboxnet1 - 192.168.57) (vboxnet2 - 192.168.58)
        # VBoxManage modifyvm $3${id} --nic1 hostonly --nictype1 Am79C973 --hostonlyadapter1 vboxnet0 --nic2 bridged --bridgeadapter2 ${bridge} --nic3 none --nic4 none


        # gnome-terminal -x bash -c "VBoxManage startvm $3${id}"

        # sleep 30
        #
        # adb connect ${eth0_a_ip}
        # sleep 1
        # adb -s ${eth0_a_ip}:5555 root
        # sleep 1
        # adb connect ${eth0_a_ip}
        # sleep 1
        # adb -s ${eth0_a_ip}:5555 root
        # sleep 1
        # adb connect ${eth0_a_ip}

        # adb -s ${eth0_a_ip}:5555 shell mkdir -p /opt/android-on-linux/quagga/out/etc
        # adb -s ${eth0_a_ip}:5555 shell cp /system/xbin/quagga/etc/zebra.conf /opt/android-on-linux/quagga/out/etc/
        # adb -s ${eth0_a_ip}:5555 shell cp /system/xbin/quagga/etc/ospf6d.conf /opt/android-on-linux/quagga/out/etc/
        # adb -s ${eth0_a_ip}:5555 shell /system/xbin/quagga/zebra -d
        # adb -s ${eth0_a_ip}:5555 shell /system/xbin/quagga/ospf6d -d

        # adb -s ${eth0_a_ip}:5555 shell ifconfig eth1 down
        # adb -s ${eth0_a_ip}:5555 shell ifconfig eth1 ${eth1_a_ip} netmask 255.255.255.0 up
        # adb -s ${eth0_a_ip}:5555 shell ifconfig eth0 down

        # VBoxManage createvm --name android-x86_64-6.0-rc1-1 --ostype Linux_64 --register
        # VBoxManage modifyvm android-x86_64-6.0-rc1-1 --memory 1024 --vram 128 --usb off --audio pulse --audiocontroller sb16 --acpi on --rtcuseutc off --boot1 disk --boot2 dvd --nic1 hostonly --nictype1 Am79C973 --hostonlyadapter1 vboxnet0
        # VBoxManage storagectl android-x86_64-6.0-rc1-1 --name "IDE Controller" --add ide --controller PIIX4
        # VBoxManage storageattach android-x86_64-6.0-rc1-1 --storagectl "IDE Controller" --port 0 --device 0 --type hdd --medium android-x86_64-6.0-rc1-1.vdi
        # VBoxManage startvm android-x86_64-6.0-rc1-1

        echo "VBoxManage startvm $3${id}"

        gnome-terminal -x bash -c "VBoxManage createvm --name $3${id} --ostype Linux_64 --register; VBoxManage modifyvm $3${id} --memory 1024 --vram 128 --usb off --audio pulse --audiocontroller sb16 --acpi on --rtcuseutc off --boot1 disk --boot2 dvd --nic1 hostonly --nictype1 Am79C973 --hostonlyadapter1 vboxnet0 --nic2 bridged --bridgeadapter2 ${bridge} --nic3 none --nic4 none; VBoxManage storagectl $3${id} --name \"IDE Controller\" --add ide --controller PIIX4; VBoxManage storageattach $3${id} --storagectl \"IDE Controller\" --port 0 --device 0 --type hdd --medium $4/$3${id}.vdi; VBoxManage startvm $3${id}; sleep 30; adb connect ${eth0_a_ip}; sleep 1; adb -s ${eth0_a_ip}:5555 root; sleep 1; adb connect ${eth0_a_ip}; sleep 1; adb -s ${eth0_a_ip}:5555 root; sleep 1; adb connect ${eth0_a_ip}; adb -s ${eth0_a_ip}:5555 shell mkdir -p /opt/android-on-linux/quagga/out/etc; adb -s ${eth0_a_ip}:5555 shell cp /system/xbin/quagga/etc/zebra.conf /opt/android-on-linux/quagga/out/etc/; adb -s ${eth0_a_ip}:5555 shell cp /system/xbin/quagga/etc/ospf6d.conf /opt/android-on-linux/quagga/out/etc/; adb -s ${eth0_a_ip}:5555 shell /system/xbin/quagga/zebra -d; adb -s ${eth0_a_ip}:5555 shell /system/xbin/quagga/ospf6d -d; adb -s ${eth0_a_ip}:5555 shell ifconfig eth1 down; adb -s ${eth0_a_ip}:5555 shell ifconfig eth1 ${eth1_a_ip} netmask 255.255.255.0 up; adb -s ${eth0_a_ip}:5555 shell ifconfig eth0 down"

        echo "adb connect ${eth0_a_ip}"

        host1=$[host1+1]
    done

}


#------------------------------------------------------------------------------------------
# function destroy_android()
# Description:
# destroy $android_node_num of androids
# receive two parameters, that are android_node_num, VM_image
#------------------------------------------------------------------------------------------

destroy_android(){

    # $1, that is, $android_node_num
    # $2, that is, VM_image

    for((id=1; id<=$1; id++))
    do
        echo "VBoxManage controlvm $2${id} poweroff"
        VBoxManage controlvm $2${id} poweroff
        #VBoxManage modifyvm $2${id} --nic1 hostonly --nictype1 Am79C973 --hostonlyadapter1 vboxnet0 --nic2 none --nic3 none --nic4 none
        VBoxManage unregistervm $2${id}
        rm "/root/VirtualBox VMs/$2${id}" -rf &>/dev/null

        sleep 1

        bridge="br_a_${id}"
        tap="tap_a_${id}"

        ifconfig ${bridge} down &>/dev/null
        brctl delif ${bridge} ${tap} &>/dev/null
        brctl delbr ${bridge} &>/dev/null

        ifconfig ${tap} down &>/dev/null
        tunctl -d ${tap} &>/dev/null
    done
}


#------------------------------------------------------------------------------------------
# usage()
# script usage
#------------------------------------------------------------------------------------------
usage(){
    cat <<-EOU
    Usage: seem-tools-CLI-semi-auto.sh a b c
        a, the value is create or destroy
        b, the number of dockers to be created
        c, the number of androids to be created

        Note: b + c <= 254

    For example:
        [root@localhost fedora23server-share]# pwd
            /opt/share-vm/fedora23server-share
        [root@localhost fedora23server-share]# ls seem-tools-CLI-semi-auto.sh
            seem-tools-CLI-semi-auto.sh
        [root@localhost fedora23server-share]#

        ./seem-tools-CLI-semi-auto.sh create 25 0 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi
        ./seem-tools-CLI-semi-auto.sh destroy 25 0 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi

        ./seem-tools-CLI-semi-auto.sh create 0 5 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi
        ./seem-tools-CLI-semi-auto.sh destroy 0 5 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi

        ./seem-tools-CLI-semi-auto.sh create 20 5 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi
        ./seem-tools-CLI-semi-auto.sh destroy 20 5 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi

    EOU
}


#------------------------------------------------------------------------------------------
# function create_ns3_manet_seem_cc()
# receive two parameter, that is docker_node_num, android_node_num
#------------------------------------------------------------------------------------------

create_ns3_manet_seem_cc(){
    echo "create seem-manet.cc from seem-manet-template.cc"

    cd /opt/tools/network_simulators/ns3/ns-allinone-3.25/ns-3.25/scratch
    rm seem-manet.cc -f &>/dev/null
    cp seem-manet-template.cc seem-manet.cc

    # after the 302 line of /opt/tools/network_simulators/ns3/ns-allinone-3.25/ns-3.25/scratch/seem-manet-template.cc
    str='302a \\n  '

    for((id=1; id<=$1; id++))
    do
        tap="tap_d_${id}"
        ns=$[id-1]
        # inter="tapBridge.SetAttribute (\"Gateway\", Ipv4AddressValue (\"192.168.26.${id}\")); tapBridge.SetAttribute (\"DeviceName\", StringValue (\"${tap}\"));\n  tapBridge.Install (adhocNodes.Get (${id}), adhocDevices.Get (${id}));\n  "
        inter="tapBridge.SetAttribute (\"DeviceName\", StringValue (\"${tap}\"));\n  tapBridge.Install (adhocNodes.Get (${ns}), adhocDevices.Get (${ns}));\n  "
        #inter="tapBridge.SetAttribute (\"DeviceName\", StringValue (\"${tap}\"));\n  "
        str=${str}${inter}
    done

    # a: docker_node_num, b:android_node_num
    #host1=$[$1+1]
    a=$1
    b=$2
    for((id=$[a+1]; id<=$[a+b]; id++))
    do
        tap="tap_a_${id}"
        ns=$[id-1]
        #inter="tapBridge.SetAttribute (\"Gateway\", Ipv4AddressValue (\"192.168.26.${host1}\")); tapBridge.SetAttribute (\"DeviceName\", StringValue (\"${tap}\"));\n  tapBridge.Install (adhocNodes.Get (${id}), adhocDevices.Get (${id}));\n  "
        inter="tapBridge.SetAttribute (\"DeviceName\", StringValue (\"${tap}\"));\n  tapBridge.Install (adhocNodes.Get (${ns}), adhocDevices.Get (${ns}));\n  "
        #inter="tapBridge.SetAttribute (\"DeviceName\", StringValue (\"${tap}\"));\n  "

        str=${str}${inter}

        #host1=$[host1+1]
    done

    # sed -i '302a \\n  tapBridge.SetAttribute ("DeviceName", StringValue ("tap_a_1"));\n  tapBridge.Install (adhocNodes.Get (0), adhocDevices.Get (0));\n  tapBridge.SetAttribute ("DeviceName", StringValue ("tap_a_2"));\n  tapBridge.Install (adhocNodes.Get (0), adhocDevices.Get (0));' seem-manet.cc

    sed -i "${str}" seem-manet.cc

    cd -
}


#------------------------------------------------------------------------------------------
# function start_ns3()
#------------------------------------------------------------------------------------------

start_ns3(){
    echo "RUNNING SIMULATION, press CTRL-C to stop it"

    cd /opt/tools/network_simulators/ns3/ns-allinone-3.25/ns-3.25

    ./waf --run scratch/seem-manet --vis

    cd -
}


#------------------------------------------------------------------------------------------
# ./seem-tools-CLI-semi-auto.sh para1 para2 para3 para4 para5
# para1 ($1), that is, the value is create or destroy
# para2 ($2), that is, the number of dockers to be created
# para3 ($3), that is, the number of androids to be created
# para4 ($4), that is, docker image, such as, busybox or ubuntu, etc.
# para5 ($5), that is, VM image, such as, android-x86_64-6.0-rc1-
# [root@localhost virtualbox-os]# pwd
# /run/media/root/158a840e-63fa-4544-b0b8-dc0d40c79241/virtualbox-os
# [root@localhost virtualbox-os]# ls
# android-x86_64-6.0-rc1-1.vdi  android-x86_64-6.0-rc1-2.vdi  android-x86_64-6.0-rc1-3.vdi  android-x86_64-6.0-rc1-4.vdi
#
# ./seem-tools-CLI-semi-auto.sh create 25 0 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi
# ./seem-tools-CLI-semi-auto.sh destroy 25 0 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi
#
# ./seem-tools-CLI-semi-auto.sh create 0 5 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi
# ./seem-tools-CLI-semi-auto.sh destroy 0 5 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi
#
# ./seem-tools-CLI-semi-auto.sh create 20 5 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi
# ./seem-tools-CLI-semi-auto.sh destroy 20 5 centos-manet android-x86_64-6.0-rc1-  PATH_of_*.vdi
#------------------------------------------------------------------------------------------

# docker search image_name
# docker pull image_name
# docker images
# docker rmi image_name
# docker run --privileged -i -t -d --net=none --name docker_$id $docker_image -t $type -i $id
# docker ps

# systemctl start docker.service

# the number of dockers and androids should be less than 254,
# if you have more nodes in your emulation environment, you can modify corresponding code.

a=$2
b=$3

if [ $# -eq 6 ]; then

    if [ $[a+b] -gt 254 ] || [ $2 -lt 0 ] || [ $3 -lt 0 ] || !([ $1 == "create" ]||[ $1 == "destroy" ]); then
        usage
        exit
    fi

    case $1 in
        create)
            if [ $2 -gt 0 ]; then create_docker $2 $4; fi
            if [ $3 -gt 0 ]; then create_android $2 $3 $5 $6; fi
            if [ $[a+b] -gt 0 ]; then
                create_ns3_manet_seem_cc $2 $3
                start_ns3
                #echo $2
            fi
        ;;
        destroy)
            if [ $2 -gt 0 ]; then
                destroy_docker $2
                rm /var/run/netns -rf &>/dev/null
            fi

            if [ $3 -gt 0 ]; then
                destroy_android $3 $5
                ifconfig vboxnet0 down &>/dev/null
            fi
        ;;
    esac
else
    usage
fi

# [root@localhost virtualbox-os]# pwd
# /run/media/root/158a840e-63fa-4544-b0b8-dc0d40c79241/virtualbox-os
# [root@localhost virtualbox-os]# ls
# android-x86_64-6.0-rc1-0.vdi  android-x86_64-6.0-rc1-2.vdi  android-x86_64-6.0-rc1-4.vdi
# android-x86_64-6.0-rc1-1.vdi  android-x86_64-6.0-rc1-3.vdi  android-x86_64-6.0-rc1-5.vdi
# [root@localhost virtualbox-os]#

# ./seem-tools-CLI-semi-auto.sh create 0 1 centos-manet android-x86_64-6.0-rc1- /run/media/root/158a840e-63fa-4544-b0b8-dc0d40c79241/virtualbox-os
# ./seem-tools-CLI-semi-auto.sh destroy 0 1 centos-manet android-x86_64-6.0-rc1- /run/media/root/158a840e-63fa-4544-b0b8-dc0d40c79241/virtualbox-os

#------------------------------------------------------------------------------------------
# So far, All is OK
#------------------------------------------------------------------------------------------

ztguang
关注
专栏目录
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值