//zz//####################################################################################
zz-linux的ip地址ifconfig手动自动141215a
zz-write:
@2014-12-16 00:22:19
@2014-12-16 23:08:42
@
REF:
linux配置IP的方法
http://www.cnblogs.com/xd502djj/archive/2011/03/01/1967800.html
KeyWord:
/etc/sysconfig/network-scripts/ifcfg-eth0 等文件的内容
/etc/network/interfaces 文件的内容
linux 开机启动(runlevel对应rc?.d, init切换runlevel)
/etc/init.d/rcS
/etc/init.d/rc
/etc/rc0.d/ => rc6.d/ 及 rcS.d/
linux 用户登陆后
/etc/profile
/root/.bash_..
//zz//####################################################################################
1.
eth0 开机自动配置的IP地址存在哪里?
1)
RedHat,Fedora 等系统
/etc/sysconfig/network-scripts/ifcfg-eth0
在该文件中,配置 eth0 开机自动配置的IP,网关,甚至DNS等信息
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.1.5
GATEWAY=192.168.1.1
DNS1=192.168.1.1
DEFROUTE=yes
IPV6INIT=no
ONBOOT=yes
2)
Ubuntu,嵌入式Linux(ti-am335x)
/etc/network/interfaces 文件
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.104
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.2
//zz//####################################################################################
2.
IP地址查看,配置命令
查看
# ifconfig
# ifconfig -a
# ifconfig eth0
配置(即使生效)
# ifconfig eth0 192.168.1.5
# ifconfig eth0 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255
开关
# ifconfig eth0 down
# ifconfig eth0 up
服务开关
# /etc/init.d/network stop
# /etc/init.d/network start
# service network status
//zz//####################################################################################
3.
gateway 以及 dns 的配置方式
查看gateway
# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.128.0 * 255.255.255.0 U 1 0 0 eth0
default 192.168.128.2 0.0.0.0 UG 0 0 0 eth0
手动添加 gateway
# route add default gw 192.168.128.2
设置DNS,resolv.conf中写 nameserver dns的ip地址
/etc/resolv.conf
# Generated by NetworkManager
zz-linux的ip地址ifconfig手动自动141215a
zz-write:
@2014-12-16 00:22:19
@2014-12-16 23:08:42
@
REF:
linux配置IP的方法
http://www.cnblogs.com/xd502djj/archive/2011/03/01/1967800.html
KeyWord:
/etc/sysconfig/network-scripts/ifcfg-eth0 等文件的内容
/etc/network/interfaces 文件的内容
linux 开机启动(runlevel对应rc?.d, init切换runlevel)
/etc/init.d/rcS
/etc/init.d/rc
/etc/rc0.d/ => rc6.d/ 及 rcS.d/
linux 用户登陆后
/etc/profile
/root/.bash_..
//zz//####################################################################################
1.
eth0 开机自动配置的IP地址存在哪里?
1)
RedHat,Fedora 等系统
/etc/sysconfig/network-scripts/ifcfg-eth0
在该文件中,配置 eth0 开机自动配置的IP,网关,甚至DNS等信息
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.1.5
GATEWAY=192.168.1.1
DNS1=192.168.1.1
DEFROUTE=yes
IPV6INIT=no
ONBOOT=yes
2)
Ubuntu,嵌入式Linux(ti-am335x)
/etc/network/interfaces 文件
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.104
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.2
//zz//####################################################################################
2.
IP地址查看,配置命令
查看
# ifconfig
# ifconfig -a
# ifconfig eth0
配置(即使生效)
# ifconfig eth0 192.168.1.5
# ifconfig eth0 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255
开关
# ifconfig eth0 down
# ifconfig eth0 up
服务开关
# /etc/init.d/network stop
# /etc/init.d/network start
# service network status
//zz//####################################################################################
3.
gateway 以及 dns 的配置方式
查看gateway
# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.128.0 * 255.255.255.0 U 1 0 0 eth0
default 192.168.128.2 0.0.0.0 UG 0 0 0 eth0
手动添加 gateway
# route add default gw 192.168.128.2
设置DNS,resolv.conf中写 nameserver dns的ip地址
/etc/resolv.conf
# Generated by NetworkManager
nameserver 192.168.128.2