Cannot run program “C:\anaconda3\python.exe“ (in directory “D:\PycharmProjects\test1“): CreateProce

于 2022-03-29 13:13:10 发布
阅读量3.9k 收藏 3
点赞数 3
文章标签： python 编辑器
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/zzydsd5/article/details/123818084
版权

.之前程序运行成功过，所以默认编译器路径和现在不一致的话，会导致出错。

程序首次运行会生成一个记录文档，类似于XML，而且会对后面的第二、三等等次的运行产生影响。打开项目根目录下的.idea文件夹下的workspace.xml文件。

删掉，运行项目，会自动生成一个新的workspace.xml。

就成功啦

zzydsd5
关注
  • 3
    点赞
  • 踩
  • 3
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
anaconda-client:Anaconda服务器客户端
05-09
Anaconda客户 这是一个命令行客户端，提供与的接口。 快速开始： 创建一个帐户： 首先在上创建一个帐户 安装客户端： 使用Conda（推荐）： $ conda install anaconda-client 随着点： pip install anaconda-client 来自来源的点子： pip install git+https://github.com/Anaconda-Server/anaconda-client 登录 $ anaconda login 使用whoami命令测试您的登录名： $ anaconda whoami 有关构建Conda软件包并将其上传到Anaconda Cloud的完整教程，请访问。 链接 http://docs.anaconda.org/ https://anaconda.org
解决pycharm导入numpy包的和使用时报错：RuntimeError: The current Numpy installation (‘D:\\python3.6\\lib\\site-packa的问题
01-21
标题用pycharm导入numpy包的和使用时报错：RuntimeError: The current Numpy installation (‘D:\python3.6\lib\site-packages\numpy\init.py 1.file→settings→project interpreter→+（建议用pychon3.6版本，我之前用3.8版本安装不上numpy）， 2.搜索numpy,注意把下面对号点上 3.现在简单用numpy还是会报错：RuntimeError: The current Numpy installation (‘D:\python3.6\lib\site
Pycharm报错：Error running ‘‘: Cannot run program “\python.exe“ (in directory ““)系统找不到指定文件夹？已解决！
希望你会喜欢
08-21 1万+
今天在跑SVM新语料分类任务的时候，因为F盘快满了，我就把跑过其他语料SVM工程直接拖到D盘上了，结果PyCharm打开后，直接不能运行？？？ 一开始以为是解释器的路径问题，我就在Python Interpreter中重新设置了python路径，结果还是不行？？？ 这就纳闷了，好在我靠绝顶的小脑瓜找到了问题缘由！ 问题报错 报错原因： 因为我的工程在之前的路径下运行过，所以PyCharm保存过项目的一些信息，而这些信息还是在之前路径下的配置。 解决办法 在该项目文件夹下找到一个叫.idea的文件夹。.
mac 上idea 提示 Сannot Run Git xcrun: error: invalid active developer path 解决方法
01-07
Mac升级了系统 在idea 中发现Git居然坏了。。。   完整的错误信息 Сannot Run Git                 xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun 看了下Git命令能否正常使用  命令行git –help 依然报和上面同样的错误 在查找了下git的安装目录   whereis git /usr/bin/
ms-python.anaconda-extension-pack-1.0.1.vsix
01-02
VS Code 中扩展 Anaconda Extension Pack
Bayesian Network（贝叶斯网络） Python Program
04-26
用python写的一段贝叶斯网络的程序 This file describes a Bayes Net Toolkit that we will refer to now as BNT. This version is 0.1. Let's consider this code an "alpha" version that contains some useful functionality, but is not complete, and is not a ready-to-use "application". The purpose of the toolkit is to facilitate creating experimental Bayes nets that analyze sequences of events. The toolkit provides code to help with the following: (a) creating Bayes nets. There are three classes of nodes defined, and to construct a Bayes net, you can write code that calls the constructors of these classes, and then you can create links among them. (b) displaying Bayes nets. There is code to create new windows and to draw Bayes nets in them. This includes drawing the nodes, the arcs, the labels, and various properties of nodes. (c) propagating a-posteriori probabilities. When one node's probability changes, the posterior probabilities of nodes downstream from it may need to change, too, depending on firing thresholds, etc. There is code in the toolkit to support that. (d) simulating events ("playing" event sequences) and having the Bayes net respond to them. This functionality is split over several files. Here are the files and the functionality that they represent. BayesNetNode.py: class definition for the basic node in a Bayes net. BayesUpdating.py: computing the a-posteriori probability of a node given the probabilities of its parents. InputNode.py: class definition for "input nodes". InputNode is a subclass of BayesNetNode. Input nodes have special features that allow them to recognize evidence items (using regular-expression pattern matching of the string descriptions of events). OutputNode.py: class definition for "output nodes". OutputBode is a subclass of BayesNetNode. An output node can have a list of actions to be performed when the node's posterior probability exceeds a threshold ReadWriteSigmaFiles.py: Functionality for loading and saving Bayes nets in an XML format. SampleNets.py: Some code that constructs a sample Bayes net. This is called when SIGMAEditor.py is started up. SIGMAEditor.py: A main program that can be turned into an experimental application by adding menus, more code, etc. It has some facilities already for loading event sequence files and playing them. sample-event-file.txt: A sequence of events that exemplifies the format for these events. gma-mona.igm: A sample Bayes net in the form of an XML file. The SIGMAEditor program can read this type of file. Here are some limitations of the toolkit as of 23 February 2009: 1. Users cannot yet edit Bayes nets directly in the SIGMAEditor. Code has to be written to create new Bayes nets, at this time. 2. If you select the File menu's option to load a new Bayes net file, you get a fixed example: gma-mona.igm. This should be changed in the future to bring up a file dialog box so that the user can select the file. 3. When you "run" an event sequence in the SIGMAEditor, the program will present each event to each input node and find out if the input node's filter matches the evidence. If it does match, that fact is printed to standard output, but nothing else is done. What should then happen is that the node's probability is updated according to its response method, and if the new probability exceeds the node's threshold, then its successor ("children") get their probabilities updated, too. 4. No animation of the Bayes net is performed when an event sequence is run. Ideally, the diagram would be updated dynamically to show the activity, especially when posterior probabilities of nodes change and thresholds are exceeded. To use the BNT, do three kinds of development: A. create your own Bayes net whose input nodes correspond to pieces of evidence that might be presented and that might be relevant to drawing inferences about what's going on in the situation or process that you are analyzing. You do this by writing Python code that calls constructors etc. See the example in SampleNets.py. B. create a sample event stream that represents a plausible sequence of events that your system should be able to analyze. Put this in a file in the same format as used in sample-event-sequence.txt. C. modify the code of BNT or add new modules as necessary to obtain the functionality you want in your system. This could include code to perform actions whenever an output node's threshold is exceeded. It could include code to generate events (rather than read them from a file). And it could include code to describe more clearly what is going on whenever a node's probability is updated (e.g., what the significance of the update is -- more certainty about something, an indication that the weight of evidence is becoming strong, etc.)
Cannot run program‘C:\Anaconda3\envs\...\python.exe’(in directory):CreateProcess error=2,系统找不到指定文件
qq_39882333的博客
01-22 6041
pycharm 运行项目出错 如图，因为之前运行成功过，过了许久再运行就出现上图的错误，sad。。。 网查了许久都没有解决我的问题。 突然，自己想到了，可能是编译器的路径被换了的问题，然后自然就想到了首次运行会生成一个记录文档，类似于XML，而且会对后面的第二、三等等次的运行产生影响。于是打开了项目根目录下的.idea文件夹下的workspace.xml文件。 果然，这里记录的和我的编译器路径不一致，我装在D 盘下，这里的记录是C盘下（应该是上次运行留下的）。接下来非常easy了，删掉，运行项目，会自动
错误:Cannot run program “C:\Users\....python.exe“
热门推荐
AndyYang2017的博客
04-16 5万+
使用PyCharm运行程序时，出现Error running Program: Cannot run program "…\python.exe"这样的错误（xxx是你的项目名称）。 是由于在原来的工程目录下，保存了Python的编译环境，包括python.exe文件。工程目录移动到其他盘以后，工程设置中找不到python.exe程序，因此报错，需要修改设置。 处理办法： 1、在pycharm窗口点击文件—设置 或者 Ctrl + Alt + s，打开设置页面 2、选择python解释器 点击右侧设
Cannot run program “E:\Social_software\Anaconda\python.exe“ (in directory “D:\SuperResolution\main“)
wenqi1的博客
01-12 875
Cannot run program "E:\Social_software\Anaconda\python.exe" (in directory "D:\SuperResolution\main"): CreateProcess error=2, 系统找不到指定的文件。 解决办法： 1、找到项目文件所在路径，找到.idea文件夹 2、删掉.idea文件夹 3、重新打开Pycharm，看是否能运行成功，若不能到第四步 4、编辑配置 5、点击ok 6、顺利运行 ...
Cannot run program “**/python.exe“ 没有那个文件或目录
qq_42178122的博客
05-29 1226
当右键点击运行代码时，出现下面的错误提示： Cannot run program “D:/Anconda3/envs/LSTR2/python.exe” (in directory “/media/gooddz/学习/code/论文代码/LSTR-main”): error=2, 没有那个文件或目录 解决方法： 点击在if name == ‘main’:的左边绿色三角形，修改运行配置，python解析器选择自己配置好的虚拟环境。 ...
eclipse develop hadoop chmod ：Cannot run program "chmod": CreateProcess error=2, ?????????-附件资源
03-02
eclipse develop hadoop chmod ：Cannot run program "chmod": CreateProcess error=2, ?????????-附件资源
基于yolov8和Pyqt5实现钢材计数系统python源码
最新发布
01-21
测试环境： anaconda3+python3.8 pytorch==1.9.0 博客地址： blog.csdn.net/FL1623863129/article/details/135734612 视频演示： https://www.bilibili.com/video/BV17W4y1F7GJ/ 注意事项： 源码里面注释少，没有提供环境模块列表，需要自己按照yolov8环境搭建并且安装好pyqt5，建议使用python3.8或者python3.9去搭建环境。
Anaconda-python3.7-Win64.rar
01-10
这就是清华镜像的python3.7的版本 原名：Anaconda3-5.3.1-Windows-x86_64.exe
Anaconda3-2022.10-Windows-x86-64.exe
11-20
Anaconda3-2022.10-Windows-x86-64.exe
PyCharm:Error runnin xxx: Cannot run program "....\python.exe".
gouxf_0219的博客
04-19 2万+
问题 使用PyCharm运行程序时，出现Error running xxx: Cannot run program "…\python.exe"这样的错误（xxx是你的项目名称）。 原因 在原来的工程目录（C盘）下，保存了Python的编译环境，包括python.exe文件。工程目录移动到F盘以后，工程设置中找不到python.exe程序，因此报错，需要修改设置。 解决 【File】-【Sett...
Anaconda3-2022.10-Windows-x86-64.exe 自动安装 python3.9 jupyter
01-28
Anaconda3-2022.10-Windows-x86_64.exe python3.9 支持windows10及以上版本 jupyter notebook是一个基于网页的交互式计算环境，它本身支持多种语言的开发，但常用于Python的开发。其优点是交互式强，易于可视化，...
anaconda3安装包Anaconda3-2021.05-Windows-x86_64.exe
02-26
1、anaconda3安装包 2、Anaconda3-2021.05-Windows-x86_64.exe
Cannot run program "D:\Anaconda\python.exe" (in directory "D:\luqingya\luqingya\.idea"): CreateProcess error=2, 系统找不到指定的文件
05-27
这个错误的原因是系统找不到指定的Python可执行文件。请确认你的Anaconda Python的安装路径是否为 `D:\Anaconda`，如果不是，请将下面的代码中的路径改为你的Anaconda Python的安装路径。 如果你确认Anaconda Python的安装路径为 `D:\Anaconda`，那么请在命令行中输入以下命令，确认你的Python可执行文件是否存在： ``` D:\Anaconda\python.exe -V ``` 如果命令能够正常执行并输出当前Python的版本号，那么说明Python可执行文件存在。如果输出类似于“D:\Anaconda\python.exe 不是内部或外部命令，也不是可运行的程序或批处理文件。”的错误信息，那么说明Python可执行文件不存在。 如果Python可执行文件不存在，那么请在Anaconda官网下载安装包并重新安装Anaconda Python；如果Python可执行文件存在，那么请检查你的IDE或命令行是否正确配置了Python的环境变量。

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值