nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)

最新推荐文章于 2024-08-02 11:28:26 发布
最新推荐文章于 2024-08-02 11:28:26 发布
阅读量1.1k 收藏
点赞数
分类专栏： linux nginx 文章标签： nginx apache 解决方案
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/Christine95/article/details/52847947
版权

问题描述

nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)

question

问题原因

  1. 使用 netstat -ntpl 查看端口占用情况
  2. 发现80端口是httpd 也就是被apache 占用了。所以要关掉该进程。

这里写图片描述

解决方案

  1. service httpd stop 关闭apache 服务
  2. service nginx start 开启nginx服务
  3. 如果是重启，请使用 service nginx restart
  4. 发现 ok 后，则去后台开启你的应用即可。

这里写图片描述

ok了。

Seven_Cld
关注
专栏目录
解决nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)以及nginx 502 Bad Gateway解决方法
念兮为美
04-28 5261
解决nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)，以及nginx 502 Bad Gateway解决方法
Nginx 学习笔记（七）如何解决nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)...
weixin_34218579的博客
12-27 340
出现：nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) 错误，有以下两种情况 1、80端口被占用 2、ipv4端口和ipv6端口冲突的问题 今天服务器安装了NodeJs,服务器实在卡的不行，就重启了，结果重启后，Nginx没有自动重启。果断的手动重启，结果问题来了 在ubuntu16.04上面尝试启动nginx...
Ngnix 启动失败，提示端口被占用
conding_算子
12-07 621
尝试启动 ngnix 服务器时，出现如下错误[emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)表示有其他进程占用了 80号 端口。使用如下命令查看占用端口的使用情况：netstat -ntpl 使用如下命令，直接杀掉 80 号端口的进程：sudo fuser -k 80/tcp 现在可以正常启动 ngnix 服务器了：s
解决nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)
qq_14989227的博客
10-16 948
今天在ubuntu10.04上面安装nginx，安装完成之后尝试启动nginx，使用命令： sudo /etc/init.d/nginx start 结果提示错误： hankcs@ubuntu:~$ sudo /etc/init.d/nginx start[sudo] password for hankcs: * Starting nginx nginx
Ngin启动nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
最新发布
lemon310的博客
08-02 334
这表明80端口已被其他的进程所绑定，无法将80端口绑定到nginx上，原因是linux系统中显存一个nginx服务，需要关闭后再重启。
nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) 错误
rosefun96的博客
10-27 444
（1）查看80端口是不是被占用了 $ netstat -anp |grep 80 tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 2679/nginx: master tcp 0 0 144.34.160.104:58030 142.250.72.227:443 TIME_WAIT - tcp 0
「Nginx」- nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) @20210409
k4nz
04-09 2692
问题描述 在启动 Nginx 服务时，产生如下错误： nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [eme.
【nginx启动出错】nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
wondersfan的博客
11-16 6078
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
nginx: [emerg] bind() to 0.0.0.0:8080 failed (48: Address already in use)
梁雨季™的博客
12-28 1942
liangyuji@liangyujideMacBook-Pro nginx % nginx nginx: [emerg] bind() to 0.0.0.0:8080 failed (48: Address already in use) nginx: [emerg] bind() to 0.0.0.0:8080 failed (48: Address already in use) nginx: [emerg] bind() to 0.0.0.0:8080 failed (48: Address alr
[root@yfs01 nginx]# ./sbin/nginx -e stop nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:10000 failed (98: Address already in use) nginx: [emerg] still could not bind()
06-07
具体来说，Nginx 无法绑定到 0.0.0.0:80 和 0.0.0.0:10000 这两个端口，因为这些端口已经被其他进程占用了。 解决这个问题的方法是找到占用这些端口的进程，并停止它们。可以使用以下命令来查找占用端口的进程： `...
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] still could not bind()
06-08
这个错误表示 Nginx 无法绑定 0.0.0.0:80 这个地址，因为该地址已经被其他进程占用了。在大多数情况下，这是因为另一个 HTTP 服务器（例如 Apache）已经在监听 80 端口。你可以使用以下命令查找占用 80 端口的进程：...
nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)解决方案
洛洛devil的专栏
09-07 3237
在安装nginx的时候，启动nginx，即如果发现： [root@master nginx]# /usr/local/nginx/sbin/nginx nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use) nginx: [emerg] bind() to 0.0.0.0:80 failed (98: A
Nginx [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use)
Mreden的博客
08-21 2888
这个是linux80端口被占用,释放下就好了(关闭下80端口下进程就Ok) sudo fuser -k 80/tcp
启动nginx报错nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
studio_1的博客
07-25 819
拒绝显示别名，能显示数字的全部转化成数字，（tcp）仅显示tcp相关选项，显示建立相关链接的程序名，仅列出有在 Listen (监听) 的服務状态。一开始以为是端口被占用，停掉对应的端口进程就行了，于是挨个停一遍。然后停掉对应的进程，注意 PID 列才是对应的进程id。完了发现不对啊，并没有作用，启动还是报这个错。那看看网络相关的端口，使用如下命令查找。使用 PID 列下的进程id停掉进程。可以看到这几个端口都是同一个进程。使用如下命令查看对应占用进程端口。那看看80端口跑了什么。
nginx: [emerg] bind() to 0.0.0.0:80 failed (98: Address already in use)
weixin_42001459的博客
05-07 4779
出现这个问题大家都知道，是因为有服务已经占用了80端口，解决方法是要么关闭已经占用的服务，要么nginx的服务不要监听80端口。个人建议采用后者，因为，关闭占用端口的服务的前提是你知道这个服务是干什么，是否重要，如果这两个指标都不知道，那么，就应该采用后者---改变nginx监听端口。 原因： 在ngin.conf 配置文件中有一个全局设置是【include /etc/nginx/conf.d/...
【已解决】Nginx启动[emerg] bind() to 0.0.0.0:80 failed(98:Address alreadyin use)
weixin_52890053的博客
03-15 7953
最近，在Linux系统上Nginx服务时候，报80 端口已经被其他进程占用，导致 Nginx 无法绑定到该端口上。杀死进程这些解决方法均无用，只有停止之前的nginx服务。重启启动才能解决问题！
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值