ls chaos_calmer/package/kernel/linux/modules/ 001-depends.mk crypto.mk hwmon.mk leds.mk netfilter.mk other.mk spi.mk virtual.mk wpan.mk block.mk firewire.mk i2c.mk lib.mk netsupport.mk pcmcia.mk usb.mk w1.mk can.mk fs.mk input.mk netdevices.mk nls.mk sound.mk video.mk wireless.mk
二、配置
下面简单列出笔记的配置的一部分内容。
1、平台类型
Target System (x86) --->
这里只选择x86。根据平台类型的不同,后面的选项也有不同。
2、目标板镜像文件
生成的镜像文件的相关配置。
Target Images ---> [*] tar.gz # 压缩包格式 [*] ext4 ---> # 可选ext4的最大节点数以及block大小 [*] Build GRUB images (Linux x86 or x86_64 host only) [*] Use Console Terminal (in addition to Serial) # 开启串口调试终端 (ttyS0) Serial port device # 串口设备名,一般为ttyS0 (115200) Serial port baud rate # 波特率,选择的与串口工具设置的波特率必须一致 (3) Seconds to wait before booting the default entry # grub倒计时,单位为秒 (4) Kernel partition size (in MB) # 内核的大小,单位为MB,一般3、4MB足够 (64) Root filesystem partition size (in MB) # 根文件系统大小,这个值越大,镜像体积越大,一般路由系统几十MB足够
3、镜像配置(系统脚本及IP配置)
[*] Image configuration ---> --- Preinit configuration options [*] Suppress stderr messages during preinit (2) Failsafe wait timeout [ ] Show all preinit network messages [ ] Suppress network message indicating failsafe () Preinit network interface # 默认IP地址 (192.168.1.1) IP address for preinit network messages (255.255.255.0) Netmask for preinit network messages (192.168.1.255) Broadcast address for preinit network messages
4、基础系统
本配置项为构建基本的文件系统,基本工具,库,等。默认即可。
Base system ---> <*> base-files................................... Base filesystem for OpenWrt # 基本文件系统 <*> dropbear........................................ Small SSH2 client/server #ssh服务器 -*- libc........................................................... C library # C库 -*- libgcc............................................... GCC support library # gcc支持库 -*- libpthread.......................................... POSIX thread library # 线程库 -*- librt................................ POSIX.1b RealTime extension library# 运行时库
5、root权限命令
如sudo等命令
Administration --->
6、Boot Loader
此项无内容
Boot Loaders ---->
7、开发相关
开发专用,会安装如gcc、gdb、ar、patch、binutils等工具,普通用户无须关注。
Development --->
8、固件
个别模块的固件,如是,则要加入内核。X86平台,无须理会。
Firmware --->
9、内核模块
真正的内核配置在此处。本模块较重要,内容较多。但本文使用的X86平台上需要配置的东西不多。
Kernel modules --->
9.1、块设备
Block Devices ---> -*- kmod-scsi-core....................................... SCSI device support
9.2、文件系统
本次移植使用的文件系统为EXT4。其它不需要。
Filesystems ---> <*> kmod-fs-ext4..................................... EXT4 filesystem support -*- kmod-fs-nfs....................................... NFS filesystem support -*- kmod-fs-nfs-common......................... Common NFS filesystem modules
9.3、硬件监控模块
如LM75,不使用。
Hardware Monitoring Support --->
9.4、I2C支持
该X86平台使用IGB网络驱动,需要I2C的支持,故选择。
I2C support ---> <*> kmod-i2c-core................................................ I2C support
9.5、输入模块
如USB鼠标、键盘,等。
Input modules ---> -*- kmod-hid..................................................... HID Devices <*> kmod-hid-generic.............................. Generic HID device support -*- kmod-input-core........................................ Input device core -*- kmod-input-evdev...................................... Input event device
9.6、本地语言支持
Native Language Support ---> -*- kmod-nls-base.................................... Native Language Support
9.7、netfilter扩展
iptables的选项需要内核的支持,在此进行选择。文本使用默认值。
Netfilter Extensions --->
9.8、网络设备
该X86平台使用的网络设备驱动为IGB,其它不选。
Network Devices ---> -*- kmod-ifb........................... Intermediate Functional Block support <*> kmod-igb....... Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support # IGB驱动 -*- kmod-libphy.................................................. PHY library # PHY库,必须 -*- kmod-mii..................................................... MII library
9.9、网络支持
对网络的支持,比如8021q、DNS、ipv6。
Network Support ---> <*> kmod-8021q........................................... 802.1Q VLAN support -*- kmod-dnsresolver.................................. In-kernel DNS Resolver -*- kmod-ipv6................................................... IPv6 support
9.10、其它模块
openwrt的menuconfig涉及大量其它东西,而内核只是其中一部分,故不像真正的kernel的menuconfig那样分类详细。很多字符类设备都在此选项。比如MMC、EEPROM、RTC、串口。
Other modules ---> <*> kmod-serial-8250.............................................. 8250 UARTs # 串口设备
9.11、SPI支持
SPI驱动,不使用。
SPI Support --->
9.12、音频支持
不使用音频驱动。
Sound Support --->
9.13、USB支持
USB接口输入设备,U盘支持,在此处选择。
USB Support ---> -*- kmod-usb-core............................................ Support for USB <*> kmod-usb-ohci............................... Support for OHCI controllers <*> kmod-usb-storage..................................... USB Storage support
9.14、视频支持
不使用视频功能。
Video Support --->
9.15、无线驱动
不使用无线驱动。
Wireless Drivers --->
10、编程语言
如Java、Lua、PHP、Perl、Python、Ruby。由于openwrt使用Lua,建议选上。
Languages --->
11、库
常用库。如压缩为libbz2、SSL库、libexif,等,使用默认选项。SSL建议选择。
Libraries --->
12、界面选项配置
openwrt的界面使用LuCI,功能项、工具在此配置。内容较庞大、较重要。
LuCI ---> 1. Collections ---> 2. Modules ---> 3. Applications ---> 4. Themes ---> 5. Protocols ---> 6. Libraries ---> 9. Freifunk --->
12.1、综合
1. Collections ---> -*- luci <*> luci-ssl......................... Standard OpenWrt set with HTTPS support
12.2、模块
LuCI基本模块在此配置。包含各种语言支持。
2. Modules ---> -*- luci-base............................................ LuCI core libraries Translations ---> <*> Chinese (zh-cn) # 中文支持 -*- luci-mod-admin-full. LuCI Administration - full-featured for full control
12.3、应用程序
界面上的应用程序在此配置。如防火墙、QOS、NTP同步,等。
3. Applications ---> -*- luci-app-firewall................ Firewall and Portforwarding application <*> luci-app-ntpc.............. NTP time synchronisation configuration module <*> luci-app-qos..................... Quality of Service configuration module <*> luci-app-vnstat.................................. LuCI Support for VnStat
12.4、主题
默认主题为luci-theme-bootstrap。
4. Themes ---> -*- luci-theme-bootstrap........................... Bootstrap Theme (default) <*> luci-theme-freifunk-bno.................... Freifunk Berlin Nordost Theme <*> luci-theme-freifunk-generic....................... Freifunk Generic Theme <*> luci-theme-openwrt................................ LuCI OpenWrt.org theme
12.5、协议
如3G、ipv6、PPP。
5. Protocols ---> <*> luci-proto-3g............................................. Support for 3G -*- luci-proto-ipv6........... Support for DHCPv6/6in4/6to4/6rd/DS-Lite/aiccu -*- luci-proto-ppp.......................... Support for PPP/PPPoE/PPPoA/PPtP 12.6、库6. Libraries ---> -*- luci-lib-ip....... Lua library for IP calculation and routing information -*- luci-lib-nixio....................................... NIXIO POSIX library13、邮件
邮件服务。不使用。
Mail --->14、多媒体
多媒体配置,如ffmpeg、流媒体播放工具。不使用。
Multimedia --->15、网络
本项为网络相关工具、模块的配置。内容较多,也较重要。
Network ---> SSH ---> -*- openssh-client............................................ OpenSSH client -*- openssh-keygen............................................ OpenSSH keygen <*> openssh-server............................................ OpenSSH server Time Synchronization ---> # 时间同步 -*- ntpclient............................. NTP (Network Time Protocol) client <*> ntpdate..................................................... ISC ntp date VPN ---> # VPN,不使用 Web Servers/Proxies ---> -*- uhttpd........................ uHTTPd - tiny, single threaded HTTP server # 小型web服务器 <*> ethtool......................... Display or change ethernet card settings <*> iperf <*> tcpdump..................... Network monitoring and data acquisition tool16、音频
不使用音频相关工具、库,不用配置。
Sound --->17、其它工具
一些其它小工具在此。内容较杂。有的是boot loader,有的是压缩库,有的是编辑器(vim)。还有其它工具,如minicom、grep、tar、bash、file,等。根据实际选择。
Utilities ---> Editors ---> # 编辑器 <*> vim.............................. Vi IMproved - enhanced vi editor (Tiny) Terminal ---> # 终端工具 <*> minicom....................................... Terminal emulation program database ---> # 数据库,如mysql、sqlite zoneinfo ---> # 时区信息 <*> bash.......................................... The GNU Bourne Again Shell <*> grep.................................. grep search utility - full version <*> hwclock.................................. query or set the hardware clock <*> tar.............................................................. GNU tar