centos6.5使用ovs-dpdk

前提：

centos 6.5

ovs 2.5.0

dpdk 16.04

编译方法参考1

编译中ovs出现的编译不过使用下面的补丁

https://github.com/tfherbert/ovs-snap/blob/dpdk-stable/openvswitch-2.5.90-dpdk-ethdev-speed.patch

支持的网卡包括

Amazon

• ena (Elastic Network Adapter)

Chelsio

• cxgbe (Terminator 5)

Cesnet

• szedata2 (COMBO-80G, COMBO-100G)

Cisco

• enic (UCS Virtual Interface Card)

Emulex

• oce (OneConnect OCe14000 family)

Intel

• e1000 (82540, 82545, 82546)
• e1000e (82571..82574, 82583, ICH8..ICH10, PCH..PCH2, I217, I218)
• igb (82575..82576, 82580, I210, I211, I350, I354, DH89xx)
• ixgbe (82598..82599, X540, X550)
• i40e (X710, XL710, X722)
• fm10k (FM10420)

Note: The drivers e1000 and e1000e are also called em. The drivers em and igb are sometimes grouped in e1000 family.

Mellanox

• mlx4 (ConnectX-3, ConnectX-3 Pro)
• mlx5 (ConnectX-4, ConnectX-4 Lx)

Netronome

• nfp (NFP-6xxx)

QLogic

• bnx2x (QLogic 578xx)

Paravirtualization

• virtio-net (QEMU)
• xenvirt (Xen)
• vmxnet3 usermap or vmxnet3 + uio (VMware ESXi)
• memnic

Others

• af_packet (Linux AF_PACKET socket)
• pcap (file or kernel driver)
• ring (memory)

编译流程

https://github.com/openvswitch/ovs/blob/master/INSTALL.DPDK.md

1. Overview

Open vSwitch can use DPDK lib to operate entirely in userspace. This file provides information on installation and use of Open vSwitch using DPDK datapath. This version of Open vSwitch should be built manually with configure and make.

The DPDK support of Open vSwitch is considered 'experimental'.

Prerequisites

• Required: DPDK 16.04, libnuma
• Hardware: DPDK Supported NICs when physical ports in use

2. Building and Installation

2.1 Configure & build the Linux kernel

On Linux Distros running kernel version >= 3.0, kernel rebuild is not required and only grub cmdline needs to be updated for enabling IOMMU [VFIO support - 3.2]. For older kernels, check if kernel is built with UIO, HUGETLBFS, PROC_PAGE_MONITOR, HPET, HPET_MMAP support.

Detailed system requirements can be found at DPDK requirements and also refer to advanced install guide INSTALL.DPDK-ADVANCED.md

2.2 Install DPDK

1. Download DPDK and extract the file, for example in to /usr/src and set DPDK_DIR

    cd /usr/src/
    wget http://dpdk.org/browse/dpdk/snapshot/dpdk-16.04.zip
    unzip dpdk-16.04.zip
   
    export DPDK_DIR=/usr/src/dpdk-16.04
    cd $DPDK_DIR
   

2. Configure and Install DPDK

   Build and install the DPDK library.

    export DPDK_TARGET=x86_64-native-linuxapp-gcc
    export DPDK_BUILD=$DPDK_DIR/$DPDK_TARGET
    make install T=$DPDK_TARGET DESTDIR=install
   

   Note: For IVSHMEM, Set export DPDK_TARGET=x86_64-ivshmem-linuxapp-gcc

2.3 Install OVS

OVS can be installed using different methods. For OVS to use DPDK datapath, it has to be configured with DPDK support and is done by './configure --with-dpdk'. This section focus on generic recipe that suits most cases and for distribution specific instructions, refer INSTALL.Fedora.md, INSTALL.RHEL.md and INSTALL.Debian.md.

The OVS sources can be downloaded in different ways and skip this section if already having the correct sources. Otherwise download the correct version using one of the below suggested methods and follow the documentation of that specific version.

• OVS stable releases can be downloaded in compressed format from Download OVS

   cd /usr/src
   wget http://openvswitch.org/releases/openvswitch-<version>.tar.gz
   tar -zxvf openvswitch-<version>.tar.gz
   export OVS_DIR=/usr/src/openvswitch-<version>
  

• OVS current development can be clone using 'git' tool

   cd /usr/src/
   git clone https://github.com/openvswitch/ovs.git
   export OVS_DIR=/usr/src/ovs
  

• Install OVS dependencies

  GNU make, GCC 4.x (or) Clang 3.4, libnuma (Mandatory) libssl, libcap-ng, Python 2.7 (Optional) More information can be found at Build Requirements

• Configure, Install OVS

   cd $OVS_DIR
   ./boot.sh
   ./configure --with-dpdk=$DPDK_BUILD
   make install
  

  Note: Passing DPDK_BUILD can be skipped if DPDK library is installed in standard locations i.e ./configure --with-dpdkshould suffice.

  Additional information can be found in INSTALL.md.

3. Setup OVS with DPDK datapath

3.1 Setup Hugepages

Allocate and mount 2M Huge pages:

• For persistent allocation of huge pages, write to hugepages.conf file in /etc/sysctl.d

  echo 'vm.nr_hugepages=2048' > /etc/sysctl.d/hugepages.conf

• For run-time allocation of huge pages

  sysctl -w vm.nr_hugepages=N where N = No. of 2M huge pages allocated

• To verify hugepage configuration

  grep HugePages_ /proc/meminfo

• Mount hugepages

  mount -t hugetlbfs none /dev/hugepages

  Note: Mount hugepages if not already mounted by default.

3.2 Setup DPDK devices using VFIO

• Supported with kernel version >= 3.6
• VFIO needs support from BIOS and kernel.

• BIOS changes:

  Enable VT-d, can be verified from dmesg | grep -e DMAR -e IOMMU output

• GRUB bootline:

  Add iommu=pt intel_iommu=on, can be verified from cat /proc/cmdline output

• Load modules and bind the NIC to VFIO driver

  modprobe vfio-pci
  sudo /usr/bin/chmod a+x /dev/vfio
  sudo /usr/bin/chmod 0666 /dev/vfio/*
  $DPDK_DIR/tools/dpdk_nic_bind.py --bind=vfio-pci eth1
  $DPDK_DIR/tools/dpdk_nic_bind.py --status
  

  Note: If running kernels < 3.6 UIO drivers to be used, please check DPDK in the VM, DPDK devices using UIO section for the steps.

3.3 Setup OVS

1. DB creation (One time step)

    mkdir -p /usr/local/etc/openvswitch
    mkdir -p /usr/local/var/run/openvswitch
    rm /usr/local/etc/openvswitch/conf.db
    ovsdb-tool create /usr/local/etc/openvswitch/conf.db  \
           /usr/local/share/openvswitch/vswitch.ovsschema
   

2. Start ovsdb-server

   No SSL support

    ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock \
        --remote=db:Open_vSwitch,Open_vSwitch,manager_options \
        --pidfile --detach
   

   SSL support

    ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock \
        --remote=db:Open_vSwitch,Open_vSwitch,manager_options \
        --private-key=db:Open_vSwitch,SSL,private_key \
        --certificate=Open_vSwitch,SSL,certificate \
        --bootstrap-ca-cert=db:Open_vSwitch,SSL,ca_cert --pidfile --detach
   

3. Initialize DB (One time step)

    ovs-vsctl --no-wait init
   

4. Start vswitchd

   DPDK configuration arguments can be passed to vswitchd via Open_vSwitch 'other_config' column. The important configuration options are listed below. Defaults will be provided for all values not explicitly set. Refer ovs-vswitchd.conf.db(5) for additional information on configuration options.

   • dpdk-init Specifies whether OVS should initialize and support DPDK ports. This is a boolean, and defaults to false.

   • dpdk-lcore-mask Specifies the CPU cores on which dpdk lcore threads should be spawned and expects hex string (eg '0x123').

   • dpdk-socket-mem Comma separated list of memory to pre-allocate from hugepages on specific sockets.

   • dpdk-hugepage-dir Directory where hugetlbfs is mounted

   • vhost-sock-dir Option to set the path to the vhost_user unix socket files.

     NOTE: Changing any of these options requires restarting the ovs-vswitchd application.

     Open vSwitch can be started as normal. DPDK will be initialized as long as the dpdk-init option has been set to 'true'.

     export DB_SOCK=/usr/local/var/run/openvswitch/db.sock
     ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init=true
     ovs-vswitchd unix:$DB_SOCK --pidfile --detach
     

     If allocated more than one GB hugepage (as for IVSHMEM), set amount and use NUMA node 0 memory. For details on using ivshmem with DPDK, refer to OVS Testcases.

     ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,0"
     ovs-vswitchd unix:$DB_SOCK --pidfile --detach
     

     To better scale the work loads across cores, Multiple pmd threads can be created and pinned to CPU cores by explicity specifying pmd-cpu-mask. eg: To spawn 2 pmd threads and pin them to cores 1, 2

     ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=6
     

5. Create bridge & add DPDK devices

   create a bridge with datapath_type "netdev" in the configuration database

   ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev

   Now you can add DPDK devices. OVS expects DPDK device names to start with "dpdk" and end with a portid. vswitchd should print (in the log file) the number of dpdk devices found.

    ovs-vsctl add-port br0 dpdk0 -- set Interface dpdk0 type=dpdk
    ovs-vsctl add-port br0 dpdk1 -- set Interface dpdk1 type=dpdk
   

   After the DPDK ports get added to switch, a polling thread continuously polls DPDK devices and consumes 100% of the core as can be checked from 'top' and 'ps' cmds.

    top -H
    ps -eLo pid,psr,comm | grep pmd
   

   Note: creating bonds of DPDK interfaces is slightly different to creating bonds of system interfaces. For DPDK, the interface type must be explicitly set, for example:

    ovs-vsctl add-bond br0 dpdkbond dpdk0 dpdk1 -- set Interface dpdk0 type=dpdk -- set Interface dpdk1 type=dpdk
   

6. PMD thread statistics

    # Check current stats
      ovs-appctl dpif-netdev/pmd-stats-show
   
    # Show port/rxq assignment
      ovs-appctl dpif-netdev/pmd-rxq-show
   
    # Clear previous stats
      ovs-appctl dpif-netdev/pmd-stats-clear
   

7. Stop vswitchd & Delete bridge

    ovs-appctl -t ovs-vswitchd exit
    ovs-appctl -t ovsdb-server exit
    ovs-vsctl del-br br0
   

4. DPDK in the VM

DPDK 'testpmd' application can be run in the Guest VM for high speed packet forwarding between vhostuser ports. DPDK and testpmd application has to be compiled on the guest VM. Below are the steps for setting up the testpmd application in the VM. More information on the vhostuser ports can be found in Vhost Walkthrough.

• Instantiate the Guest

  Qemu version >= 2.2.0
  
  export VM_NAME=Centos-vm
  export GUEST_MEM=3072M
  export QCOW2_IMAGE=/root/CentOS7_x86_64.qcow2
  export VHOST_SOCK_DIR=/usr/local/var/run/openvswitch
  
  qemu-system-x86_64 -name $VM_NAME -cpu host -enable-kvm -m $GUEST_MEM -object memory-backend-file,id=mem,size=$GUEST_MEM,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc -smp sockets=1,cores=2 -drive file=$QCOW2_IMAGE -chardev socket,id=char0,path=$VHOST_SOCK_DIR/dpdkvhostuser0 -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1,mrg_rxbuf=off -chardev socket,id=char1,path=$VHOST_SOCK_DIR/dpdkvhostuser1 -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:02,netdev=mynet2,mrg_rxbuf=off --nographic -snapshot
  

• Download the DPDK Srcs to VM and build DPDK

  cd /root/dpdk/
  wget http://dpdk.org/browse/dpdk/snapshot/dpdk-16.04.zip
  unzip dpdk-16.04.zip
  export DPDK_DIR=/root/dpdk/dpdk-16.04
  export DPDK_TARGET=x86_64-native-linuxapp-gcc
  export DPDK_BUILD=$DPDK_DIR/$DPDK_TARGET
  cd $DPDK_DIR
  make install T=$DPDK_TARGET DESTDIR=install
  

• Build the test-pmd application

  cd app/test-pmd
  export RTE_SDK=$DPDK_DIR
  export RTE_TARGET=$DPDK_TARGET
  make
  

• Setup Huge pages and DPDK devices using UIO

  sysctl vm.nr_hugepages=1024
  mkdir -p /dev/hugepages
  mount -t hugetlbfs hugetlbfs /dev/hugepages (only if not already mounted)
  modprobe uio
  insmod $DPDK_BUILD/kmod/igb_uio.ko
  $DPDK_DIR/tools/dpdk_nic_bind.py --status
  $DPDK_DIR/tools/dpdk_nic_bind.py -b igb_uio 00:03.0 00:04.0
  

  vhost ports pci ids can be retrieved using lspci | grep Ethernet cmd.

5. OVS Testcases

Below are few testcases and the list of steps to be followed.

5.1 PHY-PHY

The steps (1-5) in 3.3 section will create & initialize DB, start vswitchd and also add DPDK devices to bridge 'br0'.

1. Add Test flows to forward packets betwen DPDK port 0 and port 1

      # Clear current flows
      ovs-ofctl del-flows br0
   
      # Add flows between port 1 (dpdk0) to port 2 (dpdk1)
      ovs-ofctl add-flow br0 in_port=1,action=output:2
      ovs-ofctl add-flow br0 in_port=2,action=output:1
   

5.2 PHY-VM-PHY [VHOST LOOPBACK]

The steps (1-5) in 3.3 section will create & initialize DB, start vswitchd and also add DPDK devices to bridge 'br0'.

1. Add dpdkvhostuser ports to bridge 'br0'. More information on the dpdkvhostuser ports can be found in Vhost Walkthrough.

      ovs-vsctl add-port br0 dpdkvhostuser0 -- set Interface dpdkvhostuser0 type=dpdkvhostuser
      ovs-vsctl add-port br0 dpdkvhostuser1 -- set Interface dpdkvhostuser1 type=dpdkvhostuser
   

2. Add Test flows to forward packets betwen DPDK devices and VM ports

      # Clear current flows
      ovs-ofctl del-flows br0
   
      # Add flows
      ovs-ofctl add-flow br0 in_port=1,action=output:3
      ovs-ofctl add-flow br0 in_port=3,action=output:1
      ovs-ofctl add-flow br0 in_port=4,action=output:2
      ovs-ofctl add-flow br0 in_port=2,action=output:4
   
      # Dump flows
      ovs-ofctl dump-flows br0
   

3. Instantiate Guest VM using Qemu cmdline

   Guest Configuration

      | configuration        | values | comments
      |----------------------|--------|-----------------
      | qemu version         | 2.2.0  |
      | qemu thread affinity | core 5 | taskset 0x20
      | memory               | 4GB    | -
      | cores                | 2      | -
      | Qcow2 image          | CentOS7| -
      | mrg_rxbuf            | off    | -
   

   Instantiate Guest

      export VM_NAME=vhost-vm
      export GUEST_MEM=3072M
      export QCOW2_IMAGE=/root/CentOS7_x86_64.qcow2
      export VHOST_SOCK_DIR=/usr/local/var/run/openvswitch
   
      taskset 0x20 qemu-system-x86_64 -name $VM_NAME -cpu host -enable-kvm -m $GUEST_MEM -object memory-backend-file,id=mem,size=$GUEST_MEM,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc -smp sockets=1,cores=2 -drive file=$QCOW2_IMAGE -chardev socket,id=char0,path=$VHOST_SOCK_DIR/dpdkvhostuser0 -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1,mrg_rxbuf=off -chardev socket,id=char1,path=$VHOST_SOCK_DIR/dpdkvhostuser1 -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:02,netdev=mynet2,mrg_rxbuf=off --nographic -snapshot
   

4. Guest VM using libvirt

   The below is a simple xml configuration of 'demovm' guest that can be instantiated using 'virsh'. The guest uses a pair of vhostuser port and boots with 4GB RAM and 2 cores. More information can be found in Vhost Walkthrough.

      <domain type='kvm'>
        <name>demovm</name>
        <uuid>4a9b3f53-fa2a-47f3-a757-dd87720d9d1d</uuid>
        <memory unit='KiB'>4194304</memory>
        <currentMemory unit='KiB'>4194304</currentMemory>
        <memoryBacking>
          <hugepages>
            <page size='2' unit='M' nodeset='0'/>
          </hugepages>
        </memoryBacking>
        <vcpu placement='static'>2</vcpu>
        <cputune>
          <shares>4096</shares>
          <vcpupin vcpu='0' cpuset='4'/>
          <vcpupin vcpu='1' cpuset='5'/>
          <emulatorpin cpuset='4,5'/>
        </cputune>
        <os>
          <type arch='x86_64' machine='pc'>hvm</type>
          <boot dev='hd'/>
        </os>
        <features>
          <acpi/>
          <apic/>
        </features>
        <cpu mode='host-model'>
          <model fallback='allow'/>
          <topology sockets='2' cores='1' threads='1'/>
          <numa>
            <cell id='0' cpus='0-1' memory='4194304' unit='KiB' memAccess='shared'/>
          </numa>
        </cpu>
        <on_poweroff>destroy</on_poweroff>
        <on_reboot>restart</on_reboot>
        <on_crash>destroy</on_crash>
        <devices>
          <emulator>/usr/bin/qemu-kvm</emulator>
          <disk type='file' device='disk'>
            <driver name='qemu' type='qcow2' cache='none'/>
            <source file='/root/CentOS7_x86_64.qcow2'/>
            <target dev='vda' bus='virtio'/>
          </disk>
          <disk type='dir' device='disk'>
            <driver name='qemu' type='fat'/>
            <source dir='/usr/src/dpdk-16.04'/>
            <target dev='vdb' bus='virtio'/>
            <readonly/>
          </disk>
          <interface type='vhostuser'>
            <mac address='00:00:00:00:00:01'/>
            <source type='unix' path='/usr/local/var/run/openvswitch/dpdkvhostuser0' mode='client'/>
             <model type='virtio'/>
            <driver queues='2'>
              <host mrg_rxbuf='off'/>
            </driver>
          </interface>
          <interface type='vhostuser'>
            <mac address='00:00:00:00:00:02'/>
            <source type='unix' path='/usr/local/var/run/openvswitch/dpdkvhostuser1' mode='client'/>
            <model type='virtio'/>
            <driver queues='2'>
              <host mrg_rxbuf='off'/>
            </driver>
          </interface>
          <serial type='pty'>
            <target port='0'/>
          </serial>
          <console type='pty'>
            <target type='serial' port='0'/>
          </console>
        </devices>
      </domain>
   

5. DPDK Packet forwarding in Guest VM

   To accomplish this, DPDK and testpmd application have to be first compiled on the VM and the steps are listed in DPDK in the VM.

   • Run test-pmd application

     cd $DPDK_DIR/app/test-pmd;
     ./testpmd -c 0x3 -n 4 --socket-mem 1024 -- --burst=64 -i --txqflags=0xf00 --disable-hw-vlan
     set fwd mac_retry
     start
     

   • Bind vNIC back to kernel once the test is completed.

     $DPDK_DIR/tools/dpdk_nic_bind.py --bind=virtio-pci 0000:00:03.0
     $DPDK_DIR/tools/dpdk_nic_bind.py --bind=virtio-pci 0000:00:04.0
     

     Note: Appropriate PCI IDs to be passed in above example. The PCI IDs can be retrieved using '$DPDK_DIR/tools/dpdk_nic_bind.py --status' cmd.

5.3 PHY-VM-PHY [IVSHMEM]

The steps for setup of IVSHMEM are covered in section 5.2(PVP - IVSHMEM) of OVS Testcases in ADVANCED install guide.

6. Limitations

• Supports MTU size 1500, MTU setting for DPDK netdevs will be in future OVS release.
• Currently DPDK ports does not use HW offload functionality.

• Network Interface Firmware requirements: Each release of DPDK is validated against a specific firmware version for a supported Network Interface. New firmware versions introduce bug fixes, performance improvements and new functionality that DPDK leverages. The validated firmware versions are available as part of the release notes for DPDK. It is recommended that users update Network Interface firmware to match what has been validated for the DPDK release.

  For DPDK 16.04, the list of validated firmware versions can be found at:

  http://dpdk.org/doc/guides/rel_notes/release_16_04.html