- 博客(14)
- 资源 (2)
- 收藏
- 关注
原创 Cisco IOS IP SLAs Configuration Guide, Release 12.4
http://www.cisco.com/en/US/docs/ios/12_4/ip_sla/configuration/guide/hsla_c.html
2014-01-15 11:22:43 757
原创 Understanding BGP TTL Security
http://www.cisco.com/en/US/docs/ios/12_2s/feature/guide/fs_btsh.htmlBy default, IOS sends BGP messages to EBGP neighbors with an IP time-to-live (TTL) of 1. (This can be adjusted with ebgp-m
2014-01-28 00:26:28 1035
原创 ip mroute-cache through ipv6 general-prefix
http://www.cisco.com/en/US/docs/ios/ipv6/command/reference/ipv6_05.html
2014-01-21 21:59:06 908
原创 ip flow-exporttemplate timeout-rate & cache timeout parameters
ip flow-exporttemplate timeout-rate minutes Enables the export of information in NetFlow cache entries.The template keyword specifies that the timeout-rate keyword applies to the template.
2014-01-21 21:47:24 810
原创 some function config about IPV6
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/12_2sx/ipv6_12_2sx_book.html
2014-01-21 11:58:16 627
原创 Configuring QoS
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/12.2_55_se/configuration/guide/swqos.html#wp1161845
2014-01-21 00:12:35 569
翻译 event syslog pattern --config changed
%PARSER-5-CFGLOG_LOGGEDCMD (x1): User:[chars] logged command:[chars] This shows that parser is definitely not a valid pattern.Explanation: The config logger, which logs every CLI command, has an
2014-01-21 00:07:11 996
原创 config guide:Catalyst 3560 & 3750 Switch Cisco IOS Commands
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_52_se/command/reference/cli1.html#wp11898088
2014-01-20 23:23:31 1036
原创 Cisco EEM
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6550/prod_white_paper0900aecd803a4dad_ps6815_Products_White_Paper.html
2014-01-20 21:25:19 1317
翻译 OER Voice Traffic Optimization Using Active Probes
Table Of ContentsOER Voice Traffic Optimization Using Active ProbesFinding Feature InformationContentsPrerequisites for OER Voice Traffic Optimization Using Active ProbesInformation About
2014-01-15 11:54:22 995
原创 ipv6 ospf 1 area 0 instance 1的作用
拓扑图如下:全部都在一个网段内,2001:1234::/64,交换机没有任何配置。路由器上,开启v6路由功能,手动配置R-ID,接口全部加入区域0,进程号本地有意义,所以配置多少都无所谓,但是R1和R2是实例1,R3和R4是实例2。具体配置如下:邻居建立成功之后,邻居关系显示如下,R1和
2014-01-15 00:14:40 1854
原创 cisco wccp config guide
http://www.cisco.com/en/US/docs/ios/12_2/configfun/configuration/guide/fcf018.html
2014-01-10 21:41:48 851
原创 PIM Sparse-Mode 中 RP 的三种定义方法(static、AutoRP、BSR)
ip multicast中,我们最常用的就是PIM了,因为它独立于路由协议的特性,当之无愧地成为了最重要的多播路由协议。 PIM 分为三种模式:Sparse Dense Sparse-Dense 在非DENSE模式下,PIM需要借助RP来实现多播路由转发,多播数据转发等功能。 RP的建立方式有三种,分别是static autorp 以及 bsr RP在这里是
2014-01-10 17:44:52 6340
原创 OSPF虚链路中断检测机制
(1)OSPF邻居关系中断的特点 不像EIGRP那样触发发送Goodbye message,BGP的NOTIFICATION message OSPF中邻居一般无法通过某个消息显性地中断邻居关系,通过Inactivity Timer用于防止单边邻居关系的产生 在OSPF虚链路中,一旦建立邻居关系,就不再周期性发送Hello,邻居关系永不超时,因此需要额外机制检测虚链路
2014-01-03 21:47:42 1113
SDN组网:How SDN will shape networking
2013-04-26
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人