U-boot-1.1.6-2008R1到vdsp5(bf561)的移植记录（8）：链接错误_bss_start

 

            

经过上面几步的修改，u-boot的错误提示为：

[Error li1021] The following symbols referenced in processor 'p0' could not be resolved:

        '_bss_end [__bss_end]' referenced from 'corea.dlb[start.doj]'

        '_bss_start [__bss_start]' referenced from 'corea.dlb[start.doj]'

        'cpu_init_f [_cpu_init_f]' referenced from 'corea.dlb[start.doj]'

        'initcode [_initcode]' referenced from 'corea.dlb[start.doj]'

其中的_bss_start和_bss_end相当于两个指针，分别指向bss段的起始代码和结束代码，在start.s中是这样用的：

 

       /* Initialize BSS section ... we know that memset()

        * does not use the BSS, so it is safe to call here

        */

       serial_early_puts("Zero BSS")

       r0.l = __bss_start;

       r0.h = __bss_start;

       r1 = 0 (x);

       r2.l = __bss_end;

       r2.h = __bss_end;

       r2 = r2 - r0;

       call _memset;

很简单，就是调用memset将bss段中的内容清0。

这两个值的定义是在u-boot.lds.s中完成的，如下所示：

     .bss :

     {

         . = ALIGN(4);

         __bss_start = .;

         *(.sbss) *(.scommon)

         *(.dynbss)

         *(.bss)

         *(COMMON)

         __bss_end = .;

     } >ram

我们就将这个段稍做修改放在u-boot.ldf中：

       .bss

       {

         INPUT_SECTION_ALIGN(4)

              __bss_start = .;

              INPUT_SECTIONS($LIBRARIES_UBOOT(.sbss) $LIBRARIES_UBOOT(.scommon))

              INPUT_SECTIONS($LIBRARIES_UBOOT(.dynbss))

              INPUT_SECTIONS($LIBRARIES_UBOOT(.bss))

              INPUT_SECTIONS($LIBRARIES_UBOOT(COMMON))

              __bss_end = .;

       } > MEM_SDRAM

搞定。