App installation failed.could not write to the device.

最新推荐文章于 2024-05-26 16:33:56 发布
原创 最新推荐文章于 2024-05-26 16:33:56 发布 · 1.4w 阅读 · 1 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#installation

本文介绍了解决iOS11系统下，在真实设备上运行旧版应用时遇到的“App installation failed, could not write to the device”错误的方法。解决方案包括：删除设备上的应用、清理Xcode、清理iPhone内存及修改Bundle ID。

升级iOS11在真机上运行之前的app时，报错如下：

App installation failed

could not write to the device.

解决办法：

1、删除真机上的app

2、clean一下Xcode，重新运行app

3、清理iPhone上的内存

4、修改app的bundleID，但是不建议采用（同一个app）

Linux: kdump & kexec: /etc/kdump.conf解析；kdumpctl；makedumpfile；CONFIG_KEXEC； crashkernel
mzhan017的博客
05-23 834
这里简单介绍kdump及kexec，怎么安装，怎么使用；这里说的内核是程序层的内核：正常内核 - 是硬件层的一个CPU驱动；驱动CPU正常运行，完成各项任务。如果CPU驱动，产生错误，会很严重，导致任务运行结果不可预知，出现磁盘文件损坏，等等。转储内核 - 这个转储内核不是当前正常运行的系统内核，而是在系统内核出现问题，无法运行时，用来将系统内核的内存转储到文件的一个小的内核环境。而这个小环境也是一个仅仅实现了内存转储功能的一个小的CPU驱动。
Android 9 (P) recovery升级Map of ‘@/cache/recovery/block.map‘ failed问题分析指南
IT先森
07-03 4340
Adnroid Precovery升级Map of '@/cache/recovery/block.map’failed问题分析指南 前言   自从Android 4.4将SELinux加入Android以后，这个东西虽然说有了安全但是在开发中经常会遇到一些莫名其妙的问题，本篇今天要说的就是就是由于SELinux规则问题导致的Map of '@/cache/recovery/block.map’failed无法升级问题。 注意:本篇讲解的代码是在Android P 高通8953平台。 一.问题复盘
解决“Could not write file:xxx\target\classes”异常
tanwenfang的博客
02-26 1万+
最近遇到这样一个问题：在eclipse中，对maven项目执行“Run as–>Maven clean”之后，pom文件就出现红叉，然后无论你执行强制更新，还是执行打包操作还是其他，都报如下的错误提示： 找了很久终于找到原因了，我们知道，执行maven clean之后，target目录会被删除，但是我们从eclipse的navigator模式（或者资源管理器）下可以看到target目录还在...
App installation failed could not write to the device.
developer_zhao的博客
01-22 2325
真机测试的时候莫名其妙的出现,再次运行时又没问题了大概有三种办法 1 删掉app,重新运行 2 clean项目,command + shift + K  ,再次运行 3 重启设备 个人感觉1治标不治本,我是通过2 + 3来避免该错误提示的
iOS 11 真机运行提示：App installation failed. Could not write to the device.
weixin_30376509的博客
11-14 334
手机从iOS 10.3更新到iOS 11.1之后，真机调试提示： App installation failed. Could not write to the device. 解决办法： 1.删除旧版本的App. 2.清除Xcode，再运行。 转载于:https://www.cnblogs.com/metersj/p/7832773.html...
报错：Could not write JSON: Conflicting getter definitions for property “sno“: org.qust.entity.BaseInfo
快乐学习
09-18 1705
出现这个问题的原因是JSON的原因。就是在实体属性类里面有两个get方法冲突了，要把其中一个加上注解来让调用的方法或者类那些区分开来。org.springframework.http.converter.HttpMessageNotWritableException: Could not write JSON: Conflicting getter definitions for property "sno":.Result["data"]->org.qust.common.PageResult["rows
could not write to the device
bellazhouyi的专栏
09-16 3304
仅仅就是 手机内存不够，所以………你懂的。
keil5报Could not write file 文件路径 Error number 22
weixin_43771930的博客
01-13 7761
先新创建一个空白文本，将报错的文件中的内容全部复制到新创建的文件中并保存新建的文件，命名时注意，如果命名的和之前报错文件一致时，不要直接去替代报错文件，要先保存到其他文件夹下，关闭keil，然后再将新创建的文件去替代掉之前报错的文件，如果命名不同，则保存好之后，直接将报错文件删了。找到报错的文件，右键选择属性，选择安全，将组或用户名下的所有用户是权限都开起来，然后在去保存就可以，如果这个方法不行就使用方法2.今天在使用keil5上修改好文件，保存时，出现了下面图片的报错。方法1：设置文件权限。
Centos7.9上安装Oracle 11.2.0.3 RAC 2节点(ASMlib管理asm磁盘)
qq961573863的博客
05-26 1186
ASMLib 由以下组件组成开源 (GPL) 内核模块包：kmod-oracleasm开源 (GPL) 实用程序包：oracleasm-support闭源（专有）库包：oracleasmlib如果是Oracle Linux系统，并且是使用了带uek内核的方式启动的（uname -a确认），则只需要安装"oracleasm-support"和“oracleasmlib”即可。
Hadoop_3.X.x 注意事项
底层码农
03-31 1万+
hadoop3 hdfs web端口改为9870 <property> <name>dfs.namenode.http-address</name> <value>0.0.0.0:9870</value> <description> The address and the base port where...
PowerShell 7 环境已加载 (版本: 7.5.2) PowerShell 7 环境已加载 (版本: 7.5.2) PS C:\Users\Administrator\Desktop> cd E:\PyTorch_Build\pytorch PS E:\PyTorch_Build\pytorch> python -m venv rtx5070_env PS E:\PyTorch_Build\pytorch> .\rtx5070_env\Scripts\activate (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 修复之前的脚本错误 (rtx5070_env) PS E:\PyTorch_Build\pytorch> $fixedActivation = @" >> try { >> & "$activatePath" >> Write-Host "✅ 虚拟环境激活成功" -ForegroundColor Green >> python -VV >> } >> catch [System.Exception] { >> Write-Host "❌ 激活失败: $($_.Exception.Message)" -ForegroundColor Red >> } >> "@ InvalidOperation: Line | 3 | & "$activatePath" | ~~~~~~~~~~~~~ | The variable '$activatePath' cannot be retrieved because it has not been set. (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 切换到PyTorch源码目录 (rtx5070_env) PS E:\PyTorch_Build\pytorch> cd E:\PyTorch_Build\pytorch (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 更新pip到最新版 (rtx5070_env) PS E:\PyTorch_Build\pytorch> python -m pip install --upgrade pip Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Requirement already satisfied: pip in e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages (22.3.1) Collecting pip Using cached https://pypi.tuna.tsinghua.edu.cn/packages/b7/3f/945ef7ab14dc4f9d7f40288d2df998d1837ee0888ec3659c813487572faa/pip-25.2-py3-none-any.whl (1.8 MB) Installing collected packages: pip Attempting uninstall: pip Found existing installation: pip 22.3.1 Uninstalling pip-22.3.1: Successfully uninstalled pip-22.3.1 Successfully installed pip-25.2 (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 安装编译依赖 (rtx5070_env) PS E:\PyTorch_Build\pytorch> pip install -r requirements-build.txt --verbose Using pip 25.2 from E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\pip (python 3.10) Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Collecting setuptools<80.0,>=70.1.0 (from -r requirements-build.txt (line 2)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/0d/6d/b4752b044bf94cb802d88a888dc7d288baaf77d7910b7dedda74b5ceea0c/setuptools-79.0.1-py3-none-any.whl (1.3 MB) Collecting cmake>=3.27 (from -r requirements-build.txt (line 3)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/7c/d0/73cae88d8c25973f2465d5a4457264f95617c16ad321824ed4c243734511/cmake-4.1.0-py3-none-win_amd64.whl (37.6 MB) Collecting ninja (from -r requirements-build.txt (line 4)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/29/45/c0adfbfb0b5895aa18cec400c535b4f7ff3e52536e0403602fc1a23f7de9/ninja-1.13.0-py3-none-win_amd64.whl (309 kB) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/f3/db/8e12381333aea300890829a0a36bfa738cac95475d88982d538725143fd9/numpy-2.3.0.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/numpy/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/2e/19/d7c972dfe90a353dbd3efbbe1d14a5951de80c99c9dc1b93cd998d51dc0f/numpy-2.3.1.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/numpy/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/37/7d/3fec4199c5ffb892bed55cff901e4f39a58c81df9c44c280499e92cad264/numpy-2.3.2.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/numpy/) (requires-python:>=3.11) Collecting numpy (from -r requirements-build.txt (line 5)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/a3/dd/4b822569d6b96c39d1215dbae0582fd99954dcbcf0c1a13c61783feaca3f/numpy-2.2.6-cp310-cp310-win_amd64.whl (12.9 MB) Collecting packaging (from -r requirements-build.txt (line 6)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/20/12/38679034af332785aac8774540895e234f4d07f7545804097de4b666afd8/packaging-25.0-py3-none-any.whl (66 kB) Collecting pyyaml (from -r requirements-build.txt (line 7)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/b5/84/0fa4b06f6d6c958d207620fc60005e241ecedceee58931bb20138e1e5776/PyYAML-6.0.2-cp310-cp310-win_amd64.whl (161 kB) Collecting requests (from -r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/1e/db/4254e3eabe8020b458f1a747140d32277ec7a271daf1d235b70dc0b4e6e3/requests-2.32.5-py3-none-any.whl (64 kB) Collecting six (from -r requirements-build.txt (line 9)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/b7/ce/149a00dd41f10bc29e5921b496af8b574d8413afcd5e30dfa0ed46c2cc5e/six-1.17.0-py2.py3-none-any.whl (11 kB) Collecting typing-extensions>=4.10.0 (from -r requirements-build.txt (line 10)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/18/67/36e9267722cc04a6b9f15c7f3441c2363321a3ea07da7ae0c0707beb2a9c/typing_extensions-4.15.0-py3-none-any.whl (44 kB) Collecting charset_normalizer<4,>=2 (from requests->-r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/e2/c6/f05db471f81af1fa01839d44ae2a8bfeec8d2a8b4590f16c4e7393afd323/charset_normalizer-3.4.3-cp310-cp310-win_amd64.whl (107 kB) Collecting idna<4,>=2.5 (from requests->-r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/76/c6/c88e154df9c4e1a2a66ccf0005a88dfb2650c1dffb6f5ce603dfbd452ce3/idna-3.10-py3-none-any.whl (70 kB) Collecting urllib3<3,>=1.21.1 (from requests->-r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/a7/c2/fe1e52489ae3122415c51f387e221dd0773709bad6c6cdaa599e8a2c5185/urllib3-2.5.0-py3-none-any.whl (129 kB) Collecting certifi>=2017.4.17 (from requests->-r requirements-build.txt (line 8)) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/e5/48/1549795ba7742c948d2ad169c1c8cdbae65bc450d6cd753d124b17c8cd32/certifi-2025.8.3-py3-none-any.whl (161 kB) Installing collected packages: urllib3, typing-extensions, six, setuptools, pyyaml, packaging, numpy, ninja, idna, cmake, charset_normalizer, certifi, requests Attempting uninstall: setuptools Found existing installation: setuptools 65.5.0 Uninstalling setuptools-65.5.0: Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\_distutils_hack\ Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\distutils-precedence.pth Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\pkg_resources\ Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\setuptools-65.5.0.dist-info\ Removing file or directory e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages\setuptools\ Successfully uninstalled setuptools-65.5.0 Successfully installed certifi-2025.8.3 charset_normalizer-3.4.3 cmake-4.1.0 idna-3.10 ninja-1.13.0 numpy-2.2.6 packaging-25.0 pyyaml-6.0.2 requests-2.32.5 setuptools-79.0.1 six-1.17.0 typing-extensions-4.15.0 urllib3-2.5.0 (rtx5070_env) PS E:\PyTorch_Build\pytorch> pip install cmake ninja --upgrade Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Requirement already satisfied: cmake in e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages (4.1.0) Requirement already satisfied: ninja in e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages (1.13.0) (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 清理旧编译产物 (rtx5070_env) PS E:\PyTorch_Build\pytorch> Remove-Item -Recurse -Force build, dist -ErrorAction SilentlyContinue (rtx5070_env) PS E:\PyTorch_Build\pytorch> Write-Host "`n==== 编译环境验证 ====" -ForegroundColor Cyan ==== 编译环境验证 ==== (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 1. 目录验证 (rtx5070_env) PS E:\PyTorch_Build\pytorch> Write-Host "当前目录: $pwd" 当前目录: E:\PyTorch_Build\pytorch (rtx5070_env) PS E:\PyTorch_Build\pytorch> if ($pwd -ne "E:\PyTorch_Build\pytorch") { >> Write-Host "⚠️ 错误: 需要切换到E:\PyTorch_Build\pytorch" -ForegroundColor Yellow >> cd E:\PyTorch_Build\pytorch >> } ⚠️ 错误: 需要切换到E:\PyTorch_Build\pytorch (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 2. CUDA工具链验证 (rtx5070_env) PS E:\PyTorch_Build\pytorch> $cudaStatus = @( >> "nvcc --version", >> "nvidia-smi", >> "where cudnn64_8.dll" >> ) (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> foreach ($cmd in $cudaStatus) { >> Write-Host "`n执行: $cmd" -ForegroundColor Magenta >> try { >> Invoke-Expression $cmd >> } >> catch { >> Write-Host "❌ 命令失败: $_" -ForegroundColor Red >> } >> } 执行: nvcc --version nvcc: NVIDIA (R) Cuda compiler driver Copyright (c) 2005-2025 NVIDIA Corporation Built on Wed_Jul_16_20:06:48_Pacific_Daylight_Time_2025 Cuda compilation tools, release 13.0, V13.0.48 Build cuda_13.0.r13.0/compiler.36260728_0 执行: nvidia-smi Wed Sep 3 22:04:47 2025 +-----------------------------------------------------------------------------------------+ | NVIDIA-SMI 580.97 Driver Version: 580.97 CUDA Version: 13.0 | +-----------------------------------------+------------------------+----------------------+ | GPU Name Driver-Model | Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. | | | | MIG M. | |=========================================+========================+======================| | 0 NVIDIA GeForce RTX 5070 WDDM | 00000000:01:00.0 On | N/A | | 0% 38C P3 22W / 250W | 1601MiB / 12227MiB | 1% Default | | | | N/A | +-----------------------------------------+------------------------+----------------------+ +-----------------------------------------------------------------------------------------+ | Processes: | | GPU GI CI PID Type Process name GPU Memory | | ID ID Usage | |=========================================================================================| | 0 N/A N/A 1540 C+G ...yb3d8bbwe\WindowsTerminal.exe N/A | | 0 N/A N/A 1916 C+G C:\Windows\System32\dwm.exe N/A | | 0 N/A N/A 4972 C+G ...em32\ApplicationFrameHost.exe N/A | | 0 N/A N/A 5036 C+G ...ef.win7x64\steamwebhelper.exe N/A | | 0 N/A N/A 5996 C+G ...8bbwe\PhoneExperienceHost.exe N/A | | 0 N/A N/A 6420 C+G ...ntrolPanel\SystemSettings.exe N/A | | 0 N/A N/A 8280 C+G C:\Windows\explorer.exe N/A | | 0 N/A N/A 8428 C+G ...indows\System32\ShellHost.exe N/A | | 0 N/A N/A 8616 C+G ..._cw5n1h2txyewy\SearchHost.exe N/A | | 0 N/A N/A 9212 C+G ...y\StartMenuExperienceHost.exe N/A | | 0 N/A N/A 10092 C+G ...0.3405.125\msedgewebview2.exe N/A | | 0 N/A N/A 12816 C+G ...5n1h2txyewy\TextInputHost.exe N/A | | 0 N/A N/A 13400 C+G ...crosoft\OneDrive\OneDrive.exe N/A | | 0 N/A N/A 14212 C+G ...t\Edge\Application\msedge.exe N/A | | 0 N/A N/A 14440 C+G ...acted\runtime\WeChatAppEx.exe N/A | | 0 N/A N/A 15156 C+G ...les\Tencent\Weixin\Weixin.exe N/A | | 0 N/A N/A 18312 C+G ...es\Microsoft VS Code\Code.exe N/A | +-----------------------------------------------------------------------------------------+ 执行: where cudnn64_8.dll (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 3. Python环境验证 (rtx5070_env) PS E:\PyTorch_Build\pytorch> Write-Host "`nPython环境状态:" -ForegroundColor Magenta Python环境状态: (rtx5070_env) PS E:\PyTorch_Build\pytorch> pip show torch | Select-String "Location" WARNING: Package(s) not found: torch (rtx5070_env) PS E:\PyTorch_Build\pytorch> python -c "import torch; print(f'PyTorch版本: {torch.__version__}')" Traceback (most recent call last): File "<string>", line 1, in <module> File "E:\PyTorch_Build\pytorch\torch\__init__.py", line 61, in <module> from torch.torch_version import __version__ as __version__ File "E:\PyTorch_Build\pytorch\torch\torch_version.py", line 5, in <module> from torch.version import __version__ as internal_version ModuleNotFoundError: No module named 'torch.version' (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 设置RTX 5070专属编译参数 (rtx5070_env) PS E:\PyTorch_Build\pytorch> $cmakeArgs = @( >> "-B build", >> "-G Ninja", >> "-DUSE_CUDA=ON", >> "-DUSE_CUDNN=ON", >> "-DCUDA_TOOLKIT_ROOT_DIR=`"C:\Program Files\NVIDIA GPU Computing Toolkit\CUDA\v13.0`"", >> "-DCUDNN_ROOT_DIR=`"E:\Program Files\NVIDIA\CUNND\v9.12`"", >> "-DCUDA_ARCH_LIST=`"8.9`"", # RTX 5070架构 >> "-DTORCH_CUDA_ARCH_LIST=`"8.9`"", >> "-DCMAKE_BUILD_TYPE=Release", >> "-DUSE_NCCL=OFF", >> "-DUSE_MKLDNN=ON", >> "-DTORCH_CUDA_VERSION=11.8" # 兼容旧驱动 >> ) (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 启动配置过程 (rtx5070_env) PS E:\PyTorch_Build\pytorch> cmake ($cmakeArgs -join " ") CMake Error: Unable to (re)create the private pkgRedirects directory: E:/PyTorch_Build/pytorch/build -G Ninja -DUSE_CUDA=ON -DUSE_CUDNN=ON -DCUDA_TOOLKIT_ROOT_DIR="C:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0" -DCUDNN_ROOT_DIR="E:/Program Files/NVIDIA/CUNND/v9.12" -DCUDA_ARCH_LIST="8.9" -DTORCH_CUDA_ARCH_LIST="8.9" -DCMAKE_BUILD_TYPE=Release -DUSE_NCCL=OFF -DUSE_MKLDNN=ON -DTORCH_CUDA_VERSION=11.8/CMakeFiles/pkgRedirects This may be caused by not having read/write access to the build directory. Try specifying a location with read/write access like: cmake -B build If using a CMake presets file, ensure that preset parameter 'binaryDir' expands to a writable directory. (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 设置并行编译（根据CPU核心数调整） (rtx5070_env) PS E:\PyTorch_Build\pytorch> $env:MAX_JOBS = 8 (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> # 启动编译并记录日志 (rtx5070_env) PS E:\PyTorch_Build\pytorch> $logFile = "build_$(Get-Date -Format 'yyyyMMdd_HHmmss').log" (rtx5070_env) PS E:\PyTorch_Build\pytorch> Start-Transcript -Path $logFile Transcript started, output file is build_20250903_220514.log (rtx5070_env) PS E:\PyTorch_Build\pytorch> (rtx5070_env) PS E:\PyTorch_Build\pytorch> try { >> cmake --build build --config Release --parallel $env:MAX_JOBS >> pip install -v --no-build-isolation . >> } >> catch { >> Write-Host "🔥 编译失败！错误详情: $_" -ForegroundColor Red >> } Error: E:/PyTorch_Build/pytorch/build is not a directory Using pip 25.2 from E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\pip (python 3.10) Looking in indexes: https://pypi.tuna.tsinghua.edu.cn/simple Processing e:\pytorch_build\pytorch Running command Preparing metadata (pyproject.toml) Building wheel torch-2.9.0a0+git2d31c3d E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\setuptools\config\_apply_pyprojecttoml.py:82: SetuptoolsDeprecationWarning: `project.license` as a TOML table is deprecated !! ******************************************************************************** Please use a simple string containing a SPDX expression for `project.license`. You can also use `project.license-files`. (Both options available on setuptools>=77.0.0). By 2026-Feb-18, you need to update your project and remove deprecated calls or your builds will no longer be supported. See https://packaging.python.org/en/latest/guides/writing-pyproject-toml/#license for details. ******************************************************************************** !! corresp(dist, value, root_dir) running dist_info creating C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info writing C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\PKG-INFO writing dependency_links to C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\dependency_links.txt writing entry points to C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\entry_points.txt writing requirements to C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\requires.txt writing top-level names to C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\top_level.txt writing manifest file 'C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\SOURCES.txt' reading manifest file 'C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no files found matching 'BUILD' warning: no files found matching '*.BUILD' warning: no files found matching 'BUCK' warning: no files found matching '[Mm]akefile.*' warning: no files found matching '*.[Dd]ockerfile' warning: no files found matching '[Dd]ockerfile.*' warning: no previously-included files matching '*.o' found anywhere in distribution warning: no previously-included files matching '*.obj' found anywhere in distribution warning: no previously-included files matching '*.so' found anywhere in distribution warning: no previously-included files matching '*.a' found anywhere in distribution warning: no previously-included files matching '*.dylib' found anywhere in distribution no previously-included directories found matching '*\.git' warning: no previously-included files matching '*~' found anywhere in distribution warning: no previously-included files matching '*.swp' found anywhere in distribution adding license file 'LICENSE' adding license file 'NOTICE' writing manifest file 'C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch.egg-info\SOURCES.txt' creating 'C:\Users\Administrator\AppData\Local\Temp\pip-modern-metadata-inyji1j9\torch-2.9.0a0+git2d31c3d.dist-info' Preparing metadata (pyproject.toml) ... done Collecting filelock (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/42/14/42b2651a2f46b022ccd948bca9f2d5af0fd8929c4eec235b8d6d844fbe67/filelock-3.19.1-py3-none-any.whl (15 kB) Requirement already satisfied: typing-extensions>=4.10.0 in e:\pytorch_build\pytorch\rtx5070_env\lib\site-packages (from torch==2.9.0a0+git2d31c3d) (4.15.0) Collecting sympy>=1.13.3 (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/a2/09/77d55d46fd61b4a135c444fc97158ef34a095e5681d0a6c10b75bf356191/sympy-1.14.0-py3-none-any.whl (6.3 MB) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/eb/8d/776adee7bbf76365fdd7f2552710282c79a4ead5d2a46408c9043a2b70ba/networkx-3.5-py3-none-any.whl (from https://pypi.tuna.tsinghua.edu.cn/simple/networkx/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/6c/4f/ccdb8ad3a38e583f214547fd2f7ff1fc160c43a75af88e6aec213404b96a/networkx-3.5.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/networkx/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/3f/a1/46c1b6e202e3109d2a035b21a7e5534c5bb233ee30752d7f16a0bd4c3989/networkx-3.5rc0-py3-none-any.whl (from https://pypi.tuna.tsinghua.edu.cn/simple/networkx/) (requires-python:>=3.11) Link requires a different Python (3.10.10 not in: '>=3.11'): https://pypi.tuna.tsinghua.edu.cn/packages/90/7e/0319606a20ced20730806b9f7fe91d8a92f7da63d76a5c388f87d3f7d294/networkx-3.5rc0.tar.gz (from https://pypi.tuna.tsinghua.edu.cn/simple/networkx/) (requires-python:>=3.11) Collecting networkx>=2.5.1 (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/b9/54/dd730b32ea14ea797530a4479b2ed46a6fb250f682a9cfb997e968bf0261/networkx-3.4.2-py3-none-any.whl (1.7 MB) Collecting jinja2 (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/62/a1/3d680cbfd5f4b8f15abc1d571870c5fc3e594bb582bc3b64ea099db13e56/jinja2-3.1.6-py3-none-any.whl (134 kB) Collecting fsspec>=0.8.5 (from torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/47/71/70db47e4f6ce3e5c37a607355f80da8860a33226be640226ac52cb05ef2e/fsspec-2025.9.0-py3-none-any.whl (199 kB) Collecting mpmath<1.4,>=1.1.0 (from sympy>=1.13.3->torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/43/e3/7d92a15f894aa0c9c4b49b8ee9ac9850d6e63b03c9c32c0367a13ae62209/mpmath-1.3.0-py3-none-any.whl (536 kB) Collecting MarkupSafe>=2.0 (from jinja2->torch==2.9.0a0+git2d31c3d) Using cached https://pypi.tuna.tsinghua.edu.cn/packages/44/06/e7175d06dd6e9172d4a69a72592cb3f7a996a9c396eee29082826449bbc3/MarkupSafe-3.0.2-cp310-cp310-win_amd64.whl (15 kB) Building wheels for collected packages: torch Running command Building wheel for torch (pyproject.toml) Building wheel torch-2.9.0a0+git2d31c3d -- Building version 2.9.0a0+git2d31c3d E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\setuptools\_distutils\_msvccompiler.py:12: UserWarning: _get_vc_env is private; find an alternative (pypa/distutils#340) warnings.warn( Cloning into 'nccl'... Note: switching to '3ea7eedf3b9b94f1d9f99f4e55536dfcbd23c1ca'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c <new-branch-name> Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false cmake -GNinja -DBUILD_PYTHON=True -DBUILD_TEST=True -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=E:\PyTorch_Build\pytorch\torch -DCMAKE_PREFIX_PATH=E:\PyTorch_Build\pytorch\rtx5070_env\Lib\site-packages -DCUDNN_INCLUDE_DIR=E:\Program Files\NVIDIA\CUNND\v9.12\include\12.9 -DCUDNN_LIBRARY=E:\Program Files\NVIDIA\CUNND\v9.12\lib\12.9\x64 -DCUDNN_ROOT=E:\Program Files\NVIDIA\CUNND\v9.12 -DPython_EXECUTABLE=E:\PyTorch_Build\pytorch\rtx5070_env\Scripts\python.exe -DPython_NumPy_INCLUDE_DIR=E:\PyTorch_Build\pytorch\rtx5070_env\lib\site-packages\numpy\_core\include -DTORCH_BUILD_VERSION=2.9.0a0+git2d31c3d -DTORCH_CUDA_ARCH_LIST=8.9 -DUSE_NUMPY=True -DUSE_OPENBLAS=1 E:\PyTorch_Build\pytorch CMake Deprecation Warning at CMakeLists.txt:9 (cmake_policy): The OLD behavior for policy CMP0126 will be removed from a future version of CMake. The cmake-policies(7) manual explains that the OLD behaviors of all policies are deprecated and that a policy should be set to OLD only under specific short-term circumstances. Projects should be ported to the NEW behavior and not rely on setting a policy to OLD. -- The CXX compiler identification is MSVC 19.44.35215.0 -- The C compiler identification is MSVC 19.44.35215.0 -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: C:/Program Files (x86)/Microsoft Visual Studio/2022/BuildTools/VC/Tools/MSVC/14.44.35207/bin/Hostx64/x64/cl.exe - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: C:/Program Files (x86)/Microsoft Visual Studio/2022/BuildTools/VC/Tools/MSVC/14.44.35207/bin/Hostx64/x64/cl.exe - skipped -- Detecting C compile features -- Detecting C compile features - done -- Not forcing any particular BLAS to be found CMake Warning at CMakeLists.txt:421 (message): TensorPipe cannot be used on Windows. Set it to OFF CMake Warning at CMakeLists.txt:423 (message): KleidiAI cannot be used on Windows. Set it to OFF CMake Warning at CMakeLists.txt:435 (message): Libuv is not installed in current conda env. Set USE_DISTRIBUTED to OFF. Please run command 'conda install -c conda-forge libuv=1.39' to install libuv. -- Performing Test C_HAS_AVX_1 -- Performing Test C_HAS_AVX_1 - Success -- Performing Test C_HAS_AVX2_1 -- Performing Test C_HAS_AVX2_1 - Success -- Performing Test C_HAS_AVX512_1 -- Performing Test C_HAS_AVX512_1 - Success -- Performing Test CXX_HAS_AVX_1 -- Performing Test CXX_HAS_AVX_1 - Success -- Performing Test CXX_HAS_AVX2_1 -- Performing Test CXX_HAS_AVX2_1 - Success -- Performing Test CXX_HAS_AVX512_1 -- Performing Test CXX_HAS_AVX512_1 - Success -- Current compiler supports avx2 extension. Will build perfkernels. -- Performing Test COMPILER_SUPPORTS_HIDDEN_VISIBILITY -- Performing Test COMPILER_SUPPORTS_HIDDEN_VISIBILITY - Failed -- Performing Test COMPILER_SUPPORTS_HIDDEN_INLINE_VISIBILITY -- Performing Test COMPILER_SUPPORTS_HIDDEN_INLINE_VISIBILITY - Failed -- Could not find hardware support for NEON on this machine. -- No OMAP3 processor on this machine. -- No OMAP4 processor on this machine. -- Compiler does not support SVE extension. Will not build perfkernels. CMake Warning at CMakeLists.txt:841 (message): x64 operating system is required for FBGEMM. Not compiling with FBGEMM. Turn this warning off by USE_FBGEMM=OFF. -- Performing Test HAS/UTF_8 -- Performing Test HAS/UTF_8 - Success -- Found CUDA: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0 (found version "13.0") -- The CUDA compiler identification is NVIDIA 13.0.48 with host compiler MSVC 19.44.35215.0 -- Detecting CUDA compiler ABI info -- Detecting CUDA compiler ABI info - done -- Check for working CUDA compiler: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0/bin/nvcc.exe - skipped -- Detecting CUDA compile features -- Detecting CUDA compile features - done -- Found CUDAToolkit: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0/include (found version "13.0.48") -- PyTorch: CUDA detected: 13.0 -- PyTorch: CUDA nvcc is: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0/bin/nvcc.exe -- PyTorch: CUDA toolkit directory: E:/Program Files/NVIDIA GPU Computing Toolkit/CUDA/v13.0 -- PyTorch: Header version is: 13.0 -- Found Python: E:\PyTorch_Build\pytorch\rtx5070_env\Scripts\python.exe (found version "3.10.10") found components: Interpreter CMake Warning at cmake/public/cuda.cmake:140 (message): Failed to compute shorthash for libnvrtc.so Call Stack (most recent call first): cmake/Dependencies.cmake:44 (include) CMakeLists.txt:869 (include) -- Found CUDNN: E:/Program Files/NVIDIA/CUNND/v9.12/lib/13.0/x64/cudnn.lib -- Could NOT find CUSPARSELT (missing: CUSPARSELT_LIBRARY_PATH CUSPARSELT_INCLUDE_PATH) CMake Warning at cmake/public/cuda.cmake:226 (message): Cannot find cuSPARSELt library. Turning the option off Call Stack (most recent call first): cmake/Dependencies.cmake:44 (include) CMakeLists.txt:869 (include) -- Could NOT find CUDSS (missing: CUDSS_LIBRARY_PATH CUDSS_INCLUDE_PATH) CMake Warning at cmake/public/cuda.cmake:242 (message): Cannot find CUDSS library. Turning the option off Call Stack (most recent call first): cmake/Dependencies.cmake:44 (include) CMakeLists.txt:869 (include) -- USE_CUFILE is set to 0. Compiling without cuFile support CMake Warning at cmake/public/cuda.cmake:317 (message): pytorch is not compatible with `CMAKE_CUDA_ARCHITECTURES` and will ignore its value. Please configure `TORCH_CUDA_ARCH_LIST` instead. Call Stack (most recent call first): cmake/Dependencies.cmake:44 (include) CMakeLists.txt:869 (include) -- Added CUDA NVCC flags for: -gencode;arch=compute_89,code=sm_89 CMake Warning at cmake/Dependencies.cmake:95 (message): Not compiling with XPU. Could NOT find SYCL. Suppress this warning with -DUSE_XPU=OFF. Call Stack (most recent call first): CMakeLists.txt:869 (include) -- Building using own protobuf under third_party per request. -- Use custom protobuf build. CMake Warning at cmake/ProtoBuf.cmake:37 (message): Ancient protobuf forces CMake compatibility Call Stack (most recent call first): cmake/ProtoBuf.cmake:87 (custom_protobuf_find) cmake/Dependencies.cmake:107 (include) CMakeLists.txt:869 (include) CMake Deprecation Warning at third_party/protobuf/cmake/CMakeLists.txt:2 (cmake_minimum_required): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntax to tell CMake that the project requires at least <min> but has been updated to work with policies introduced by <max> or earlier. -- -- 3.13.0.0 -- Performing Test CMAKE_HAVE_LIBC_PTHREAD -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed -- Looking for pthread_create in pthreads -- Looking for pthread_create in pthreads - not found -- Looking for pthread_create in pthread -- Looking for pthread_create in pthread - not found -- Found Threads: TRUE -- Caffe2 protobuf include directory: $<BUILD_INTERFACE:E:/PyTorch_Build/pytorch/third_party/protobuf/src>$<INSTALL_INTERFACE:include> -- Trying to find preferred BLAS backend of choice: MKL -- MKL_THREADING = OMP -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of void* -- Check size of void* - done -- MKL_THREADING = OMP CMake Warning at cmake/Dependencies.cmake:213 (message): MKL could not be found. Defaulting to Eigen Call Stack (most recent call first): CMakeLists.txt:869 (include) CMake Warning at cmake/Dependencies.cmake:279 (message): Preferred BLAS (MKL) cannot be found, now searching for a general BLAS library Call Stack (most recent call first): CMakeLists.txt:869 (include) -- MKL_THREADING = OMP -- Checking for [mkl_intel_lp64 - mkl_intel_thread - mkl_core - libiomp5md] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_intel_thread - mkl_core - libiomp5md] -- Library mkl_intel: not found -- Checking for [mkl_intel_lp64 - mkl_intel_thread - mkl_core] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_intel_thread - mkl_core] -- Library mkl_intel: not found -- Checking for [mkl_intel_lp64 - mkl_sequential - mkl_core] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_sequential - mkl_core] -- Library mkl_intel: not found -- Checking for [mkl_intel_lp64 - mkl_core - libiomp5md - pthread] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_core - libiomp5md - pthread] -- Library mkl_intel: not found -- Checking for [mkl_intel_lp64 - mkl_core - pthread] -- Library mkl_intel_lp64: not found -- Checking for [mkl_intel - mkl_core - pthread] -- Library mkl_intel: not found -- Checking for [mkl - guide - pthread - m] -- Library mkl: not found -- MKL library not found -- Checking for [blis] -- Library blis: BLAS_blis_LIBRARY-NOTFOUND -- Checking for [Accelerate] -- Library Accelerate: BLAS_Accelerate_LIBRARY-NOTFOUND -- Checking for [vecLib] -- Library vecLib: BLAS_vecLib_LIBRARY-NOTFOUND -- Checking for [flexiblas] -- Library flexiblas: BLAS_flexiblas_LIBRARY-NOTFOUND -- Checking for [openblas] -- Library openblas: BLAS_openblas_LIBRARY-NOTFOUND -- Checking for [openblas - pthread - m] -- Library openblas: BLAS_openblas_LIBRARY-NOTFOUND -- Checking for [openblas - pthread - m - gomp] -- Library openblas: BLAS_openblas_LIBRARY-NOTFOUND -- Checking for [libopenblas] -- Library libopenblas: BLAS_libopenblas_LIBRARY-NOTFOUND -- Checking for [goto2 - gfortran] -- Library goto2: BLAS_goto2_LIBRARY-NOTFOUND -- Checking for [goto2 - gfortran - pthread] -- Library goto2: BLAS_goto2_LIBRARY-NOTFOUND -- Checking for [acml - gfortran] -- Library acml: BLAS_acml_LIBRARY-NOTFOUND -- Checking for [blis] -- Library blis: BLAS_blis_LIBRARY-NOTFOUND -- Could NOT find Atlas (missing: Atlas_CBLAS_INCLUDE_DIR Atlas_CLAPACK_INCLUDE_DIR Atlas_CBLAS_LIBRARY Atlas_BLAS_LIBRARY Atlas_LAPACK_LIBRARY) -- Checking for [ptf77blas - atlas - gfortran] -- Library ptf77blas: BLAS_ptf77blas_LIBRARY-NOTFOUND -- Checking for [] -- Looking for sgemm_ -- Looking for sgemm_ - not found -- Cannot find a library with BLAS API. Not using BLAS. -- Using pocketfft in directory: E:/PyTorch_Build/pytorch/third_party/pocketfft/ CMake Deprecation Warning at third_party/pthreadpool/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntax to tell CMake that the project requires at least <min> but has been updated to work with policies introduced by <max> or earlier. CMake Deprecation Warning at third_party/FXdiv/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntax to tell CMake that the project requires at least <min> but has been updated to work with policies introduced by <max> or earlier. CMake Deprecation Warning at third_party/cpuinfo/CMakeLists.txt:1 (CMAKE_MINIMUM_REQUIRED): Compatibility with CMake < 3.10 will be removed from a future version of CMake. Update the VERSION argument <min> value. Or, use the <min>...<max> syntax to tell CMake that the project requires at least <min> but has been updated to work with policies introduced by <max> or earlier. -- The ASM compiler identification is MSVC CMake Warning (dev) at rtx5070_env/Lib/site-packages/cmake/data/share/cmake-4.1/Modules/CMakeDetermineASMCompiler.cmake:234 (message): Policy CMP194 is not set: MSVC is not an assembler for language ASM. Run "cmake --help-policy CMP194" for policy details. Use the cmake_policy command to set the policy and suppress this warning. Call Stack (most recent call first): third_party/XNNPACK/CMakeLists.txt:18 (PROJECT) This warning is for project developers. Use -Wno-dev to suppress it. -- Found assembler: C:/Program Files (x86)/Microsoft Visual Studio/2022/BuildTools/VC/Tools/MSVC/14.44.35207/bin/Hostx64/x64/cl.exe -- Building for XNNPACK_TARGET_PROCESSOR: x86_64 -- Generating microkernels.cmake
最新发布
09-04
2. CMake配置失败：`CMake Error: Unable to (re)create the private pkgRedirects directory` 3. 编译过程中出现错误：`Error: E:/PyTorch_Build/pytorch/build is not a directory` 4. 编译时检测到多个警告，特别...
KEIL 编译出现 could not write file
qq_38295600的博客
03-07 2999
KEIL 编译出现 could not write file
解决Could not write JSON报错
weixin_42148384的博客
07-16 4963
解决报错org.springframework.http.converter.HttpMessageNotWritableException: Could not write JSON
关于Could not write JSON: Infinite recursion (StackOverflowError)的解决思路
Melo_FengZhi的博客
01-19 8782
  之前在开发过程中遇到的一些坑因为比较忙所以一直没时间把它们记录下来，今天恰好有比较多的空闲时间，所以尽快来总结下吧！   不知道大家在开发过程中序列化对象到前端时是否会碰到Could not write JSON: Infinite recursion (StackOverflowError)这样的报错，本人在之前跟前端联调时就遇到了这种情况。也就是如下图的报错：   遇到问题我们首先...
IOS xcode 真机上出现 App installation failed Could not write to the device
sky_long_fly的专栏
01-22 1954
今天给同事手机装App的时候，发现一直报这个错误。首先是同事手机原来debug装的App打不开了，后来想了一下最近有更新过苹果的证书。把手机中原有的App(当然是你自己开发的那个App)删除后重新再debug就没有问题了。 ...
iOS真机调试失败
芷江的博客
10-22 754
一、提示：App installation failed could not write to the device. 解决方法：手机内存不足，腾空内存空间即可。
Xcode调试常见问题
热门推荐
jackhjb的专栏
12-11 3万+
1. 编译iPad真机时,选择了 Architetures:Standard(armv6) BaseSDK:iPhoneDevice3.2 TargetDeviceFamily:iPad. 若编译出现如下错误: Command /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc-4.2 failed with exit co
Xcode9 Could not receive a message from the device
码农甲乙丙
09-20 2610
Xcode9正版发布后，无线调试不需要配置ip地址了，只需要保证在同一个局域网即可。连接成功后效果是这样的:但是第一次转接成功后，进行第一次编译可能会编译失败，会给出以下提示信息:Could not receive a message from the device解决这个问题，非常简单，重启iPhone和退出Xcode9并重启，再次编译就会成功，从此以后就可以用上无线调试了，哈哈。
iOS-Xcode9 Could not receive a message from the device
MinggeQingchun的博客
09-01 1799
Xcode9正版发布后，无线调试不需要配置ip地址了，只需要保证在同一个局域网即可   但是第一次转接成功后，进行第一次编译可能会编译失败，会给出以下提示信息 Could not receive a message from the device 解决这个问题，非常简单，重启iPhone和退出Xcode9并重新打开，再次编译就会成功...
Installation did not succeed. The application could not be installed: INSTALL_FAILED_OLDER_SDK List...
05-23
This error message occurs when you are trying to install an...Note that lowering the minimum SDK version may cause some features to not work on older devices and could affect the overall user experience.
评论 5
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
表情包 代码片
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值