要求:该驱动程序主设备文件名为:/dev/cmos , 主设备号位 211 ,次设备号为0
cmos.c
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/cdev.h>
#include <linux/types.h>
#include <linux/slab.h> //kmalloc()
#include <asm/uaccess.h> //copy_from_user
#include <linux/pci.h>
#include <linux/module.h>
#include <asm/io.h>
MODULE_LICENSE("GPL") ;
#define device_name "cmos"
#define cmos_major 211
#define cmos_minor 0
#define CMOS_READ(addr) ({outb(0x80|addr,0x70);inb(0x71);})
#define BCD_TO_BIN(val) ((val)=((val)&15)+((val)>>4)*10)
static int cmos_open(struct inode *inode, struct file *file){
return 0;
}
static int cmos_release(struct inode *inode, struct file *file){
return 0;
}
static ssize_t cmos_read(struct file *file, char *buf,size_t count, loff_t *ppos)
{
char d[6]; //yy/mm/dd/hh/min/sec
int i;
printk("cmos driver:read\n");
d[0] = CMOS_READ(9);
d[1] = CMOS_READ(8);
d[2] = CMOS_READ(7);
d[3] = CMOS_READ(4);
d[4] = CMOS_READ(2);
d[5] = CMOS_READ(0);
for(i=0;i<6;i++)
BCD_TO_BIN(d[i]);
if(count > 6)
count = 6;
copy_to_user(buf,d,count);
return count;
}
static struct file_operations cmos_fops = {
owner:THIS_MODULE, /* Owner *///<linux/fs.h>
open:cmos_open, /* Open method */
read:cmos_read,
release:cmos_release, /* Release method */
};
static int __init cmos_init(void)
{
printk("CMOS Driver Initialized.\n");
register_chrdev(cmos_major , device_name,&cmos_fops) ;
return 0;
}
static void __exit cmos_exit(void)
{
printk("exit\n");
unregister_chrdev(cmos_major , device_name) ;
}
module_init(cmos_init) ;
module_exit(cmos_exit) ;
cmostest.c
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
char buf[6];
int main(int argc,char **argv)
{
int fd;
int ret;
if((fd=open("/dev/cmos",O_RDWR))<0)
{
printf("cmos driver open fail\n");
return -1;
}
ret=read(fd,buf,6);
if(ret == -1)
{
printf("read fail\n");
return -1;
}
printf("CMOS tell me the time is:20%02d/%02d/%02d %02d:%02d:%02d\n",buf[0],buf[1],buf[2],buf[3],buf[4],buf[5]);
close(fd);
return 0;
}
Makefile:
ifneq ($(KERNELRELEASE),)
obj-m := cmos.o
else
KERNELDIR ?= /lib/modules/$(shell uname -r)/build
PWD := $(shell pwd)
default:
$(MAKE) -C $(KERNELDIR) M=$(PWD) modules
clean:
rm -rf *.o *~ core .depend .*.cmd *.ko *.mod.c
rm -rf Module.* modules.*
endif
加载模块 并查看调试信息
查看创建的设备驱动
运行测试程序
卸载驱动模块,检查模块驱动设备是否没有了