VC com开发中实现IObjectSafety

打开
工程名Ctl.h

搜索
class C工程名Ctrl : public COleControl
在其上面添加
#include <objsafe.h>

搜索
DECLARE_DYNCREATE(C工程名Ctrl)

下面添加
DECLARE_INTERFACE_MAP()

 BEGIN_INTERFACE_PART(ObjSafe, IObjectSafety)
  STDMETHOD_(HRESULT, GetInterfaceSafetyOptions) (
            REFIID riid,
            DWORD __RPC_FAR *pdwSupportedOptions,
            DWORD __RPC_FAR *pdwEnabledOptions
  );
       
        STDMETHOD_(HRESULT, SetInterfaceSafetyOptions) (
            REFIID riid,
            DWORD dwOptionSetMask,
            DWORD dwEnabledOptions
  );
 END_INTERFACE_PART(ObjSafe);




打开
工程名Ctl.cpp




搜索
BOOL C工程名Ctrl::C工程名CtrlFactory::UpdateRegistry(BOOL bRegister)
{
 // TODO: Verify that your control follows apartment-model threading rules.
 // Refer to MFC TechNote 64 for more information.
 // If your control does not conform to the apartment-model rules, then
 // you must modify the code below, changing the 6th parameter from
 // afxRegApartmentThreading to 0.

 if (bRegister)
  return AfxOleRegisterControlClass(
   AfxGetInstanceHandle(),
   m_clsid,
   m_lpszProgID,
   IDS_工程名,  //这里的工程名必须为大写
   IDB_工程名,  //这里的工程名必须为大写
   afxRegApartmentThreading,
   _dwGetLocalOleMisc,
   _tlid,
   _wVerMajor,
   _wVerMinor);
 else
  return AfxOleUnregisterClass(m_clsid, m_lpszProgID);
}



替换为

/
// Interface map for IObjectSafety

BEGIN_INTERFACE_MAP( C工程名Ctrl, COleControl )
 INTERFACE_PART(C工程名Ctrl, IID_IObjectSafety, ObjSafe)
END_INTERFACE_MAP()

/
// IObjectSafety member functions

// Delegate AddRef, Release, QueryInterface

ULONG FAR EXPORT C工程名Ctrl::XObjSafe::AddRef()
{
    METHOD_PROLOGUE(C工程名Ctrl, ObjSafe)
    return pThis->ExternalAddRef();
}

ULONG FAR EXPORT C工程名Ctrl::XObjSafe::Release()
{
    METHOD_PROLOGUE(C工程名Ctrl, ObjSafe)
    return pThis->ExternalRelease();
}

HRESULT FAR EXPORT C工程名Ctrl::XObjSafe::QueryInterface(
    REFIID iid, void FAR* FAR* ppvObj)
{
    METHOD_PROLOGUE(C工程名Ctrl, ObjSafe)
    return (HRESULT)pThis->ExternalQueryInterface(&iid, ppvObj);
}

const DWORD dwSupportedBits =
  INTERFACESAFE_FOR_UNTRUSTED_CALLER |
  INTERFACESAFE_FOR_UNTRUSTED_DATA;
const DWORD dwNotSupportedBits = ~ dwSupportedBits;
 
/
// CStopLiteCtrl::XObjSafe::GetInterfaceSafetyOptions
// Allows container to query what interfaces are safe for what. We're
// optimizing significantly by ignoring which interface the caller is
// asking for.
HRESULT STDMETHODCALLTYPE
 C工程名Ctrl::XObjSafe::GetInterfaceSafetyOptions(
  REFIID riid,
        DWORD __RPC_FAR *pdwSupportedOptions,
        DWORD __RPC_FAR *pdwEnabledOptions)
{
 METHOD_PROLOGUE(C工程名Ctrl, ObjSafe)

 HRESULT retval = ResultFromScode(S_OK);

 // does interface exist?
 IUnknown FAR* punkInterface;
 retval = pThis->ExternalQueryInterface(&riid,
     (void * *)&punkInterface);
 if (retval != E_NOINTERFACE) { // interface exists
  punkInterface->Release(); // release it--just checking!
 }
 
 // we support both kinds of safety and have always both set,
 // regardless of interface
 *pdwSupportedOptions = *pdwEnabledOptions = dwSupportedBits;

 return retval; // E_NOINTERFACE if QI failed
}

/
// CStopLiteCtrl::XObjSafe::SetInterfaceSafetyOptions
// Since we're always safe, this is a no-brainer--but we do check to make
// sure the interface requested exists and that the options we're asked to
// set exist and are set on (we don't support unsafe mode).
HRESULT STDMETHODCALLTYPE
 C工程名Ctrl::XObjSafe::SetInterfaceSafetyOptions(
        REFIID riid,
        DWORD dwOptionSetMask,
        DWORD dwEnabledOptions)
{
    METHOD_PROLOGUE(C工程名Ctrl, ObjSafe)
 
 // does interface exist?
 IUnknown FAR* punkInterface;
 pThis->ExternalQueryInterface(&riid, (void * *)&punkInterface);
 if (punkInterface) { // interface exists
  punkInterface->Release(); // release it--just checking!
 }
 else { // interface doesn't exist
  return ResultFromScode(E_NOINTERFACE);
 }

 // can't set bits we don't support
 if (dwOptionSetMask & dwNotSupportedBits) {
  return ResultFromScode(E_FAIL);
 }
 
 // can't set bits we do support to zero
 dwEnabledOptions &= dwSupportedBits;
 // (we already know there are no extra bits in mask )
 if ((dwOptionSetMask & dwEnabledOptions) !=
   dwOptionSetMask) {
  return ResultFromScode(E_FAIL);
 }       
 
 // don't need to change anything since we're always safe
 return ResultFromScode(S_OK);
}
/
// C工程名Ctrl::C工程名CtrlFactory::UpdateRegistry -
// Adds or removes system registry entries for C工程名Ctrl

BOOL C工程名Ctrl::C工程名CtrlFactory::UpdateRegistry(BOOL bRegister)
{
 // TODO: Verify that your control follows apartment-model threading rules.
 // Refer to MFC TechNote 64 for more information.
 // If your control does not conform to the apartment-model rules, then
 // you must modify the code below, changing the 6th parameter from
 // afxRegApartmentThreading to 0.

 if (bRegister)
  return AfxOleRegisterControlClass(
   AfxGetInstanceHandle(),
   m_clsid,
   m_lpszProgID,
   IDS_工程名, //这里的工程名为大写
   IDB_工程名, //这里的工程名为大写
   afxRegApartmentThreading,
   _dw工程名OleMisc,
   _tlid,
   _wVerMajor,
   _wVerMinor);
 else
  return AfxOleUnregisterClass(m_clsid, m_lpszProgID);
}

/
// C工程名Ctrl::C工程名Ctrl - Constructor