magic packet 远程唤醒需填写 IP broadcast address

之前摸索过电脑,知道hp compaq6910p有远程唤醒功能的。当时没在意,现在忽然有了实际的需求,就想起来折腾一下了。看了网上的做法,主要是两方面设置,BIOS和网卡。之后就可以用magic packet来发包唤醒,但网上对这个软件的使用是只需要填写destination Ethernet Address,信以为真,可是怎么也唤不醒。最后自己琢磨着那个IP Broadcast Address也该填填吧,就试着填了自己局域网的广播地址,没想到就成了!哎,网络虽然有很大帮助,但有的时候真不能完全信啊,网上太多东西没有经过验证了。
PCnet Magic Packet(TM) Utility 1.00, September 9, 1997 ------------------------------------------------------- INTRODUCTION ~~~~~~~~~~~~ This is the release notice for the PCnet Magic Packet(TM) Utility Revision 1.00 software. All files are in DOS FAT format. AMD抯 Magic Packet utility is a convenient tool for system administrators for remotely powering up groups of workstations at preset times. The utility provides the following two basic functions: ?Creates a table of IP and hardware addresses for all hosts in a local area network. ?Associates each group of workstations/hosts to an alarm clock, and power on each group when the time comes. This utility supports the Microsoft Windows NT 4.0 and Windows 95 operating system environments. CONTENTS ~~~~~~~~~~~~~ The Rev 1.00 files are distributed as follows: Directory 1 - release.txt : the file you are viewing currently. - magpac.exe - magpac.hlp - conspawn.exe - magpac.cnt Directory 2 - msvcrt.dll - mfc42.dll - magpacbg.bmp Documents - mpuser.doc : Microsoft Word 6.0 document that describes the usage of the utility - testrept.doc : Test Report in Microsoft Word 6.0 format. DOCUMENTATION ~~~~~~~~~~~~~ This release contains version 1.0 of AMD's PCnet Magic Packet Utility User's Guide (MPuser.doc) and a test report (TestRept.Doc) describing the scope and content of tests that were conducted with this release of the utility. These documents are available in the distribution media. INSTALLATION INSTRUCTIONS ~~~~~~~~~~~~~~~~~~~~~~~~~ These instructions apply for both Windows 95 and Windows NT 4.0. 1. Open a DOS window 2. Create a directory such as c:\mputil 3. Copy all files contained in Directory 1 to the c:\mputil directory 4. For Windows 95, change to the windows system directory (default is c:\windows) directory For Windows NT, change to the Windows NT system32 sub-directory (default is c:\winnt\system32) Copy the *.dll files in Direc
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值