dnw for linux(ubuntu)

首先要安装libusb-dev这个库。我是在ubuntu下做的。
那么就：sudo apt-get install libusb-dev

装完之后就编译一个下载工具，网上有个牛人提供了一个。代码如下：

/* dnw2 linux main file. This depends on libusb.  
*  
* Author:         Fox <hulifox008@163.com>  
* License:        GPL  
*  
*/  
  
  
  
#include <stdio.h>  
#include <usb.h>  
#include <errno.h>  
#include <sys/stat.h>  
#include <fcntl.h>  
#include <unistd.h>  
  
#define                 QQ2440_SECBULK_IDVENDOR                0x5345  
#define                QQ2440_SECBULK_IDPRODUCT        0x1234  
  
  
struct usb_dev_handle * open_port()  
{  
        struct usb_bus *busses, *bus;  
  
        usb_init();  
        usb_find_busses();  
        usb_find_devices();  
  
        busses = usb_get_busses();  
        for(bus=busses;bus;bus=bus->next)  
        {  
                 struct usb_device *dev;  
                for(dev=bus->devices;dev;dev=dev->next)  
                {  
                printf("idVendor:0x%x\t,ipProduct:0x%x\n",dev->descriptor.idVendor,dev->descriptor.idProduct);  
                        if( QQ2440_SECBULK_IDVENDOR==dev->descriptor.idVendor  
                        &&  QQ2440_SECBULK_IDPRODUCT==dev->descriptor.idProduct)  
                        {  
                                printf("Target usb device found!\n");  
                                struct usb_dev_handle *hdev = usb_open(dev);  
                                if(!hdev)  
                                {  
                                        perror("Cannot open device");          
                                }  
                                else  
                                {  
                                        if(0!=usb_claim_interface(hdev, 0))  
                                        {  
                                                perror("Cannot claim interface");  
                                                usb_close(hdev);  
                                                hdev = NULL;  
                                        }  
                                }  
                                return hdev;  
                        }  
                }  
        }  
          
        printf("Target usb device not found!\n");  
  
        return NULL;  
}  
  
void usage()  
{  
        printf("Usage: dnw2 <file>\n\n");  
}  
  
unsigned char* prepare_write_buf(char *filename, unsigned int *len)  
{  
        unsigned char *write_buf = NULL;  
        struct stat fs;  
  
        int fd = open(filename, O_RDONLY);  
        if(-1==fd)  
        {  
                perror("Cannot open file");  
                return NULL;  
        }  
        if(-1==fstat(fd, &fs))  
        {  
                perror("Cannot get file size");  
                goto error;  
        }  
        write_buf = (unsigned char*)malloc(fs.st_size+10);  
        if(NULL==write_buf)  
        {  
                perror("malloc failed");  
                goto error;  
        }  
  
        if(fs.st_size != read(fd, write_buf+8, fs.st_size))  
        {  
                perror("Reading file failed");  
                goto error;  
        }  
  
        printf("Filename : %s\n", filename);  
        printf("Filesize : %d bytes\n", fs.st_size);  
  
        *((u_int32_t*)write_buf) = 0x30000000;                //download address  
        *((u_int32_t*)write_buf+1) = fs.st_size + 10;        //download size;  
  
        *len = fs.st_size + 10;  
        return write_buf;  
  
error:  
        if(fd!=-1) close(fd);  
        if(NULL!=write_buf) free(write_buf);  
        fs.st_size = 0;  
        return NULL;  
          
}  
  
int main(int argc, char *argv[])  
{  
        if(2!=argc)  
        {  
                usage();  
                return 1;  
        }  
  
        struct usb_dev_handle *hdev = open_port();  
        if(!hdev)  
        {  
                return 1;  
        }  
  
        unsigned int len = 0;  
        unsigned char* write_buf = prepare_write_buf(argv[1], &len);  
        if(NULL==write_buf) return 1;  
  
        unsigned int remain = len;  
        unsigned int towrite;  
        printf("Writing data ...\n");  
        while(remain)  
        {  
                towrite = remain>512 ? 512 : remain;  
                if(towrite != usb_bulk_write(hdev, 0x03, write_buf+(len-remain), towrite, 3000))  
                {  
                        perror("usb_bulk_write failed");  
                        break;  
                }  
                remain-=towrite;  
                printf("\r%d%\t %d bytes     ", (len-remain)*100/len, len-remain);  
                fflush(stdout);  
        }  
        if(0==remain) printf("Done!\n");  
        return 0;  
} 

把它保存为文件如：dnw2.c
接着编译: gcc dnw2.c -o dnw2 -lusb
编译完得到的dnw2就是usb下载的PC端了。
下载时用:dnw2 <filename>下载你的文件到板上。速度还不错哦。
干脆再生成的链接文件sudo ln -s ./dnw2 /usr/sbin/dnw2
这样在我们每编译完要下载的文件就可以直接下载了。